Installation problems under Ubuntu 6.10

I'm using Ubuntu 6.10 (Edgy Eft) and am having some problems installing Oracle Calendar. I've posted the output of my installation below. Any ideas?
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
nawk: error while loading shared libraries: libm.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.26887/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

This solution worked perfect for me on Ubuntu Gutsy (7.10)
I did have to make gui_install and cal_linux executable: chmod +x gui_install cal_linux

Similar Messages

Installation problem on Ubuntu 8.04

When I tried to install SJSWS7 on Ubuntu 8.04 (Chinese Simplified), words on the installation windows are all unreadable words (except for the English characters). Please tell me what I can do!
Thanks.
Owen

to sandycn: You are really a treasure Sandy!!!! Thanks a lot. Last night I used your way and it really worked! ^o^
to joe.mccabe: Your solution, I believe, will work too! I'll write down both you and Sandy's suggestion and for further reference!! But I really want to know what is the default font used in WS7? I have several Chinese fonts installed in my Ubuntu 8.04, but you see none is right for WS7! Not every people is an expert for WS7, someone might be just learning how to use WS, so I believe we can make it easier for beginners!!! Or maybe all these have been written in the distribution document and I didn't find them! :-(((((((
By the way, where can I find a handbook on how to use Netbeans6.5? My feeling is that the Java language is difficult to learn, and the IDE is also something we should learn thoroughly if we want learn Java really well! There are a lot of things written for Java, but nowhere can I find a document about how to use the IDE! The online help is not really so helpful, and the infomation provided in the Netbeans6.5 HELP is not very complete!
The problem I encountered now is: I'm trying to write a small application for looking up phone numbers. The phone numbers are listed in a CSV file. The problem is where I should put the CSV file and how to access it! (I'm using the Netbeans IDE, and the application I'm doing on is a desktop application)
I guess the solution must be quite easy, but I just cann't find any document to tell me the way!
Edited by: Owen.Wang on Nov 24, 2008 4:44 PM
Edited by: Owen.Wang on Nov 24, 2008 5:22 PM

Oracle 10g XE installation problem on Ubuntu Linux, Oracle will not start

Hi,
After installing the pakages the error is when I call sqlplus and login as SYS :-
oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
What I have done:-
My system is 64 bit AMD.
I installed .deb package on Ubuntu 9.04 server. I installed the following packages.
1.     ibc6-i386
2.     libaio_0.3.104-1_i386.deb
3.     bc
4.     oracle-xe-universal_10.2.0.1-1.1_i386.deb.
The Oracle processes do not start after running /etc/init.d/oracle-xe start.
I can tnsping from the local machine.
dpkg -l |grep libaio gives the following:
ii libaio1 0.3.107-3ubuntu1 Linux kernel AIO access library - shared lib

I have been running XE on 9.04 (32bit on my laptop - 64bit on my workstation) and both works fine. I had no problem installing. I followed the directions in documents I found on Ubuntu forums and also google. The document I used to install on 64bit was from http://littlebrain.org
I remember using
dpkg -i --force-architecture libaio1_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture libaio-dev_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture libaio1-dbg_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture oracle-xe_10.2.0.1-1.0_i386.deb
and then I used the ./oracle-xe configure as root, the installation was ok - and I have even updated the APEX version to 3.2.1 on the XE installation running on my 64bit Ubuntu 9.04
hope this proves useful
R/ Zafer

Installation problem in ubuntu 8.04

Hi All,
I have installed apex_3.1.2, 6 months back on Windows Vista OS and everything work perfectly, obviously it was on Oracle 10g XE.
Steps are as follows:-
1. cd apex\apex3.1.2\apex
2. sqlplus / as sysdba
3. CREATE TABLESPACE APEX DATAFILE ‘C:\ORACLEXE\ORADATA\XE\APEX.DBF’
SIZE 500M
EXTENT MANAGEMENT LOCAL
SEGMENT SPACE MANAGEMENT AUTO;
4. CREATE TABLESPACE APEX_FILES DATAFILE ‘C:\ORACLEXE\ORADATA\XE\APEX_FILES.DBF’
SIZE 100M
EXTENT MANAGEMENT LOCAL
SEGMENT SPACE MANAGEMENT AUTO;
5. @apexins APEX APEX_FILES temp /i/
6. sqlplus / as sysdba
7. @apxrtins APEX APEX_FILES temp /i/
8. sqlplus / as sysdba
9. @apxchpwd
10. htmldb
11. @apxldimg.sql c:\apex\apex_3.1.2
12. exit
13. cd utilities
14. sqlplus / as sysdba
15. @reset_image_prefix.sql
16. press ENTER
IN WEB BROWSER
http://127.0.0.1:8080/apex
ws : internal
un : admin
pw : htmldb
Now I'm trying to install apex_3.2 on Oracle 10g XE.
I installed oracle 10g XE and it worked perfectly, but I'm unable to install apex_3.2 on Oracle 10g XE Database, I used above steps instead of 3.1.2 I used 3.2
I looked under install.log file, it is as follows:-
Commit complete.
VII. L O A D E N G L I S H D I C T I O N A R Y
Trigger altered.
insert into wwv_flow_dictionary$(owner,language,security_group_id,words,words_capitalized,words_soundex) values('PUBLIC','en-us',0,'ACM','Acm','A250')
ERROR at line 1:
ORA-00001: unique constraint (APEX_030200.WWV_FLOW_DICTIONARY$WORDS) violated
I'm unable to include whole .log file, if anybody can provide me email address I can forward him???
If anybody can help me out than that would be great?
Thanks
Deep

Thanks for replying Joel,
I thought no one reply, but still atleast after one week someone replied me!!!!!
Thanks for your first statement about unnecessary statements, but frankly speakly I tried your reply without doing steps 6,7, 14 & 15 & guess what installation didnt work around and I need to uninstall oracle DB with oracle apex and once again tried with my list of steps on Windows Vista OS and everything work fine, so I think you need to double check with your first statement.
Regarding your Second Statement, yes you are right I tried installation and uninstallation several times both on Windows & and Ubuntu too so I'm really when did this error approach, also I got many other errors too, but as this forum as only 3000 characters I;m unable to paste whole of my log file, so if you can provide your email address I can shot your an email with my original log.
And finally, as this is thread is all about installation on Ubuntu, I'm able to get installation perfectly on Windows OS, but not on Ubuntu OS.
So can you please also provide me proper uninstallation as well as installation steps especially for Ubuntu OS so that I can tried onto my personal laptop.
Thanks you very much once again
Deep

Installation problem under AIX 5.3 with Oracle 10g

Hello,
I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
In ImportMonitor.Console.Log i have the following errors:
Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
Inside SAPSSEXC_4.log i have the following errors:
/usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: T512CLU deleted/truncated #20071130102908
myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
myCluster (63.20.Imp): 656: return code received from nametab is 2
myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
Under SAPPOOL i have:
usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ATAB deleted/truncated #20071130102908
failed to read short nametab of table AT01                           (rc=2)
(CNVPOOL) conversion failed for row 0 of table VARKEY = ã ±ã ±ã °â â â â â â â â â â â â â â â â â â â â â â
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
Do you have any idea how can i procceed with the errors?
Thank you in advance
Thanasis Porpodas

Hi,
look at sap note 921593 and search for myCluster ,
read that section following is a part of that note.
Symptom:
During the import into a UNICODE system the following error occurs
(for example in the SAPCLUST.log):
myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC    .
myCluster (63.2.Imp): 1927: logic table is canonical.
myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC    .
myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC    .
myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
myCluster: CLU4       *00001*
myCluster (63.2.Imp): 319: error during conversion of cluster item.
myCluster (63.2.Imp): 322: affected physical table is CLU4.
(CNV) ERROR: code page conversion failed              rc = 2
|
|                              RSCP - Error
| Error from:            Codepage handling (RSCP)
| code: 128 RSCPENOOBJ   No such object
| Dummy module without real rscpmc[34]
| module: rscpmm no:    2 line:    75          T100: TS008
| TSL01: CPV p3: Dummy-IPC   p4: rscpmc4_init
`----
Cause:
This problem is caused by incorrect data which should have been removed from the source system before the export.
Solution:
There are two possible workarounds:
      1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
              search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
      2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
              search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.

Installation problem under windows XP

My PC runs under Windows XP. I want to install LabVIEW. The installer begins to copy files and displays the message "L'application n'a pa réussi à s'initialiser correctement (0xc0000142). Cliquez sur OK pour arrêter l'application). " (I've the french version). If I click on OK, the message appears again, ant the task is very difficult to kill. despite this message, the installation continues to run but never ends. After a moment, there was no more activity. The only thing I had to do was to reboot the PC.
The anti virus was desactivated. I tryed again with the administrator profile but with no more succes.
Could someboty give me some explanation?
Thanks.

Try copying the CD to your hard drive and installing from there. I have never received this exact error but have seen other installations repaired by this procedure. It's worth a try.
J.R. Allen

S205 - Sound installation problems under XP

Hi,
I just bought an Ideapad s205 free DOS. Windows XP installation went perfectly. All drivers from the lenovo web page worked without any problems. There is just the sound, that does not work. When I try to use the online offered driver it says, that the hardware does not exist. At the moment, I have no clew which driver I could use.
Thanks for your help!

Hi and welcome,
try this Thread where you can found Windows 7 & Windows XP Driver for your machine
or go direct to Ideapad S205 XP Driver should be the Connexant Audio Driver
keep in mind that you have Servicepack 3 for Windows XP (German) installed , also DotNet Framework 3.5
and this could be helpful (in german) for driver installation ..
or this the way to go ...
control panel >rightclick system >devicemanager >update driver >install from choose location computer hdd >browse to
where driver is found in extracted , (when you try to install) path is this way :
C:\Drivers\Conexant Audio Driver\XP32 > choose the LT1CC25a.inf ... > ok . driver now should be installed ...
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Java Studio Creator Installation Problems in ubuntu linux (JRE not found)

Hi, im having some problem with the installation of this tool, i try to install it and i get a message saying that it can't found the JRE, i have also tried passing it by argument like this:
-is:javahome /usr/lib/j2se/jre/bin/
-is:javahome /usr/lib/j2se/jre/
but i get the same message, any suggestions??
Thanks in advance.

I was getting these same errors, and after a bunch of poking around
in the install script and debugging it, I finally figured out that the
"problem" was that I was typing 'sh <installer>' instead of chmoding the
installer +x and running it as a command. I still don't understand why
it couldn't find the installed JVN (it's in /usr/bin/java, for heaven's
sake!), but when running it as a command it extracted the bundled jvm
and completed the install.
It did produce an error about being unable to find some stuff for the
bundled server, which I haven't tried to track down since I don't think
I need it. But I was able to install Creator and run it on Gentoo.
Now if I can just figure out why it does nothing when I click build
on an existing project, I'll be happy.

Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023

I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115

SQL Developer Installation Problems

Hi,
We are trying to find a workable alternative to TOAD and have tried to install SQL Developer with not much success.... I think I am just about to give up but hope this last attempt to post for help can create a miracle.
I would appreciate very much if any one knows of a comprehensive document out there that can help trouble shoot the installation problems.
Let me give you the hardware and software versions first and then the problems.
1) SQL Developer tried: sqldeveloper-1.2.1.3213-no-jre and sqldeveloper-1.2.1.3213
2) JRE tried: JRE 1.5 and JRE 6 (C:\Program Files\Java\jre1.6.0_03)
3) Window: XP Professional version 2002 Service pack 2
4) Hardware: Intel Pentium 4 CPU 2.80 GHz, 1.98 GB of RAM
Problems:
1) SQL Developer could not find native JDBC. I don't understand why, despite all the variables set in Oracleclient10g_basic in the registry, SQL Developer did not seem to be able to find a 10g client on a network drive. I have to install 10g client directly onto my pc (C:\oracle\product\10.2.0\client_1) to solve this problem.
2) SQL Developer abruptly disappeared after database login.
I was able to connect and log into an Oralce 10g database with TNS Connect Identifier approach. There were objects (tables, views, etc) showed up briefly on the left hand side of the SQL Developer and then it just completely disappeared without even an error message or a tearful good-bye.
The only thing I can find is this error log about EXCEPTION_ACCESS_VIOLATION. After hours searching through OTN for possible mentioning of this error with SQL Developer, I found nothing so far.
Why is it so difficult to install SQL Developer? Are there a set of un-spoken pre-requisites that has to be satisfied before it can be installed properly? If so, what are they? Path system variable? Registry? Anything else?
Here's the complete EXCEPTION_ACCESS_VIOLATION error log:
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x2ca5683c, pid=952, tid=2576
# Java VM: Java HotSpot(TM) Client VM (1.6.0_03-b05 mixed mode, sharing)
# Problematic frame:
# C [OraOCIEI10.dll+0x4f683c]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread (0x04330400): JavaThread "Init Insight" [_thread_in_native, id=2576]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000000
Registers:
EAX=0x31a28e40, EBX=0x00000000, ECX=0x03231622, EDX=0x00000000
ESP=0x04b0f168, EBP=0x04b0f1a8, ESI=0x00000001, EDI=0x0413ded4
EIP=0x2ca5683c, EFLAGS=0x00010297
Top of Stack: (sp=0x04b0f168)
0x04b0f168: 00000001 00a3fb8e 0000000a 00000001
0x04b0f178: 0413c78c 00000001 02c52aa8 0000000a
0x04b0f188: 00000020 00a4047e 090ea038 0413def4
0x04b0f198: 03231622 6d8a87b3 032325c1 0413c78c
0x04b0f1a8: 04b0f1d8 2ca57072 0413ded4 032325c1
0x04b0f1b8: 00000001 00000000 03231620 03231622
0x04b0f1c8: 00000000 00000000 00000000 00000000
0x04b0f1d8: 04b0f234 2ca56e06 0413c78c 0413ded4
Instructions: (pc=0x2ca5683c)
0x2ca5682c: 5c 00 a1 80 58 b3 31 88 9f c4 00 00 00 8b 14 98
0x2ca5683c: 8b 0a 81 e1 00 80 00 00 89 4d dc 0f 85 90 03 00
Stack: [0x04ac0000,0x04b10000), sp=0x04b0f168, free space=316k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [OraOCIEI10.dll+0x4f683c]
C [OraOCIEI10.dll+0x4f7072]
C [OraOCIEI10.dll+0x4f6e06]
C [OraOCIEI10.dll+0x419685]
C [OCI.dll+0x7333]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j oracle.jdbc.driver.T2CStatement.t2cParseExecuteDescribe(Loracle/jdbc/driver/OracleStatement;JIIIZZZZ[BIBII[SI[B[CII[SII[B[CII[I[S[BIIIIZZ[Loracle/jdbc/driver/Accessor;[[[B[J[BI[CI[SIZ)I+0
j oracle.jdbc.driver.T2CCallableStatement.executeForDescribe()V+271
j oracle.jdbc.driver.T2CCallableStatement.executeForRows(Z)V+41
j oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout()V+275
j oracle.jdbc.driver.OraclePreparedStatement.executeInternal()I+94
j oracle.jdbc.driver.OraclePreparedStatement.execute()Z+17
j oracle.jdbc.driver.OracleCallableStatement.execute()Z+60
j oracle.dbtools.raptor.insight.CompletionInsight.getInsightableOracleDatabase(Loracle/javatools/db/Database;)Loracle/dbtools/raptor/insight/InsightableDatabase;+70
j oracle.dbtools.raptor.insight.CompletionInsight.<init>(Loracle/ide/Context;Loracle/javatools/db/Database;)V+161
j oracle.dbtools.sqlworksheet.sqlview.SqlEditorMainPanel$5.run()V+52
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
=>0x04330400 JavaThread "Init Insight" [_thread_in_native, id=2576]
0x0416ac00 JavaThread "Timer-4" [_thread_blocked, id=1460]
0x0412cc00 JavaThread "Timer-3" [_thread_blocked, id=2544]
0x04323800 JavaThread "WeakDataReference polling" [_thread_blocked, id=3756]
0x0315cc00 JavaThread "Image Fetcher 3" daemon [_thread_blocked, id=3412]
0x02c17c00 JavaThread "Image Fetcher 2" daemon [_thread_blocked, id=2124]
0x04324800 JavaThread "Image Fetcher 1" daemon [_thread_blocked, id=2088]
0x04321800 JavaThread "Image Fetcher 0" daemon [_thread_blocked, id=276]
0x02ca2c00 JavaThread "WaitCursorTimer" daemon [_thread_blocked, id=2096]
0x00296800 JavaThread "DestroyJavaVM" [_thread_blocked, id=3816]
0x02cb0400 JavaThread "Timer-1" [_thread_blocked, id=2832]
0x02c32000 JavaThread "IconOverlayTracker Timer" [_thread_blocked, id=1204]
0x04060800 JavaThread "Log Page Updater" [_thread_blocked, id=2160]
0x03323800 JavaThread "TimerQueue" daemon [_thread_blocked, id=3996]
0x032d1800 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=4004]
0x032ca400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=1488]
0x032c9800 JavaThread "AWT-Shutdown" [_thread_blocked, id=256]
0x032c8400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1064]
0x02c0d000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2956]
0x02c08400 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3236]
0x02c07400 JavaThread "Attach Listener" daemon [_thread_blocked, id=3248]
0x02c06800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3232]
0x02bfe400 JavaThread "Finalizer" daemon [_thread_blocked, id=2328]
0x02bfd400 JavaThread "Reference Handler" daemon [_thread_blocked, id=1668]
Other Threads:
0x02bfc000 VMThread [id=2868]
0x02c0e800 WatcherThread [id=2940]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 1536K, used 500K [0x06960000, 0x06b00000, 0x090c0000)
eden space 1408K, 26% used [0x06960000, 0x069bd3b0, 0x06ac0000)
from space 128K, 100% used [0x06ac0000, 0x06ae0000, 0x06ae0000)
to space 128K, 0% used [0x06ae0000, 0x06ae0000, 0x06b00000)
tenured generation total 19372K, used 12857K [0x090c0000, 0x0a3ab000, 0x26960000)
the space 19372K, 66% used [0x090c0000, 0x09d4e400, 0x09d4e400, 0x0a3ab000)
compacting perm gen total 22272K, used 22205K [0x26960000, 0x27f20000, 0x2a960000)
the space 22272K, 99% used [0x26960000, 0x27f0f780, 0x27f0f800, 0x27f20000)
ro space 8192K, 62% used [0x2a960000, 0x2ae614a8, 0x2ae61600, 0x2b160000)
rw space 12288K, 52% used [0x2b160000, 0x2b7a7278, 0x2b7a7400, 0x2bd60000)
Dynamic libraries:
0x00400000 - 0x00423000      C:\WINDOWS\system32\java.exe
0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f5000      C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f02000      C:\WINDOWS\system32\RPCRT4.dll
0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
0x7c340000 - 0x7c396000      C:\Program Files\Java\jre1.6.0_03\bin\msvcr71.dll
0x6d7c0000 - 0x6da0a000      C:\Program Files\Java\jre1.6.0_03\bin\client\jvm.dll
0x7e410000 - 0x7e4a0000      C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f57000      C:\WINDOWS\system32\GDI32.dll
0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
0x6d310000 - 0x6d318000      C:\Program Files\Java\jre1.6.0_03\bin\hpi.dll
0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
0x6d770000 - 0x6d77c000      C:\Program Files\Java\jre1.6.0_03\bin\verify.dll
0x6d3b0000 - 0x6d3cf000      C:\Program Files\Java\jre1.6.0_03\bin\java.dll
0x6d7b0000 - 0x6d7bf000      C:\Program Files\Java\jre1.6.0_03\bin\zip.dll
0x6d000000 - 0x6d1c3000      C:\Program Files\Java\jre1.6.0_03\bin\awt.dll
0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
0x77c10000 - 0x77c68000      C:\WINDOWS\system32\msvcrt.dll
0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.dll
0x774e0000 - 0x7761d000      C:\WINDOWS\system32\ole32.dll
0x5ad70000 - 0x5ada8000      C:\WINDOWS\system32\uxtheme.dll
0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
0x6d2b0000 - 0x6d303000      C:\Program Files\Java\jre1.6.0_03\bin\fontmanager.dll
0x74720000 - 0x7476b000      C:\WINDOWS\system32\MSCTF.dll
0x7c9c0000 - 0x7d1d7000      C:\WINDOWS\system32\shell32.dll
0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
0x773d0000 - 0x774d3000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2982_x-ww_ac3f9c03\comctl32.dll
0x5d090000 - 0x5d12a000      C:\WINDOWS\system32\comctl32.dll
0x77b40000 - 0x77b62000      C:\WINDOWS\system32\Apphelp.dll
0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
0x03850000 - 0x0386a000      C:\sqldeveloper-1.2.1.3213-no-jre\sqldeveloper\ide\lib\idenative.dll
0x77120000 - 0x771ab000      C:\WINDOWS\system32\OLEAUT32.dll
0x6d570000 - 0x6d583000      C:\Program Files\Java\jre1.6.0_03\bin\net.dll
0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
0x6d590000 - 0x6d599000      C:\Program Files\Java\jre1.6.0_03\bin\nio.dll
0x605d0000 - 0x605d9000      C:\WINDOWS\system32\mslbui.dll
0x6d220000 - 0x6d243000      C:\Program Files\Java\jre1.6.0_03\bin\dcpr.dll
0x71a50000 - 0x71a8f000      C:\WINDOWS\System32\mswsock.dll
0x76f20000 - 0x76f47000      C:\WINDOWS\system32\DNSAPI.dll
0x76fb0000 - 0x76fb8000      C:\WINDOWS\System32\winrnr.dll
0x76f60000 - 0x76f8c000      C:\WINDOWS\system32\WLDAP32.dll
0x66210000 - 0x66219000      C:\WINDOWS\system32\netware\NWWS2NDS.DLL
0x50d50000 - 0x50d98000      C:\WINDOWS\system32\NETWIN32.DLL
0x50d00000 - 0x50d15000      C:\WINDOWS\system32\CLNWIN32.DLL
0x50df0000 - 0x50e10000      C:\WINDOWS\system32\LOCWIN32.DLL
0x50db0000 - 0x50ddc000      C:\WINDOWS\system32\NCPWIN32.dll
0x71ad0000 - 0x71ad9000      C:\WINDOWS\system32\WSOCK32.dll
0x66220000 - 0x6622c000      C:\WINDOWS\system32\netware\NWWS2SLP.DLL
0x66250000 - 0x66257000      C:\WINDOWS\system32\NWSRVLOC.dll
0x76fc0000 - 0x76fc6000      C:\WINDOWS\system32\rasadhlp.dll
0x662b0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
0x71a90000 - 0x71a98000      C:\WINDOWS\System32\wshtcpip.dll
0x6d560000 - 0x6d569000      C:\Program Files\Java\jre1.6.0_03\bin\management.dll
0x62f00000 - 0x62f13000      C:\oracle\product\10.2.0\client_1\ocijdbc10.dll
0x03e50000 - 0x03ea7000      C:\oracle\product\10.2.0\client_1\OCI.dll
0x2c560000 - 0x31bf6000      C:\oracle\product\10.2.0\client_1\OraOCIEI10.dll
0x77a80000 - 0x77b14000      C:\WINDOWS\system32\CRYPT32.dll
0x77b20000 - 0x77b32000      C:\WINDOWS\system32\MSASN1.dll
VM Arguments:
jvm_args: -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10 -XX:JavaPriority9_To_OSPriority=9 -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true -Dsun.java2d.ddoffscreen=false -Dwindows.shell.font.languages= -Dide.conf=sqldeveloper.conf -Dide.home.dir.name=.sqldeveloper
java_command: oracle.ide.boot.Launcher
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=C:\oracle\product\10.2.0\client_1;X:\oracle10g\product\10.2.0\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\DMIX;C:\WINDOWS\system32\nls;C:\WINDOWS\system32\nls\ENGLISH;C:\Program Files\IDM Computer Solutions\UltraEdit-32
USERNAME=leexx255
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 9, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 2 stepping 9, cmov, cx8, fxsr, mmx, sse, sse2
Memory: 4k page, physical 2079468k(1385300k free), swap 4021668k(3516444k free)
vm_info: Java HotSpot(TM) Client VM (1.6.0_03-b05) for windows-x86, built on Sep 24 2007 22:24:33 by "java_re" with unknown MS VC++:1310
Is this a java problem? SQL Developer problem? Or something else?
Thanks in advance,
a TOAD lover

The problem you are seeing (the EXCEPTION_ACCESS_VIOLATION) is a result of a version mismatch between the JDBC driver being used by SQL Developer and the Oracle client that is found on the path.
This issue only occurs when trying to use the OCI version of the JDBC driver. The simplest fix is to switch to using the basic connection type and thus using the thin (all Java) JDBC driver. As no Oracle client is required in this case, the version mismatch won't be an issue.
However, the connection approach you are using should work, and if you wish to try to sort out the problems there, we should be able to further diagnose the underlying cause of the version mismatch.
To do this, I would need to see what SQL Developer thinks are the potential Oracle client installs, as well as which install it ends up picking. Can you copy/paste the output in the Log Window (Logging Page) that is present after SQL Developer starts (but before you attempt to connect to any database)? There should be a whole series of entries like 'Checking for ORACLE_HOME environment variable' and 'Checking JDBC driver at <some path>'
These log entries are output by SQL Developer as it tries to sort out the various bits of information about Oracle client installs and thus give a peek at the selection logic being used.
Oh, and also - the value of your PATH variable would be useful as well. It may be that there is an Oracle client install on the PATH that supersedes the install SQL Developer is finding via the registry or ORACLE_HOME variable.
- John McGinnis
SQL Developer Team

CRS Installation problem - node out of sync?

Hi at all
I have some installation problems with 10gR2 Rac and CRS on RHEL 4.0 (kernel 2.6.9) and Vmware Workastion 5.0. . Also I have applied suggestion in the vmware KB available at this link
http://kb.vmware.com/vmtnkb/search.do?cmd=displayKC&docType=kc&externalId=1420&sliceId=SAL_Public
due some synchronization problems .
Also, I have configured ntpd daemon for sync my virtual machine.
The error message from installActions2006-12-18_01-10-58AM.log is:
INFO: Exclude file list /tmp/OraInstall2006-12-18_01-10-58AM/installExcludeFile.lst does not exist or is empty. The file is ignored.
WARNING: Error while copying directory /app/oracle/product/10.2.0/crs with exclude file list 'null' to nodes 'oracle002'. [PRKC-1002 : All the submitted commands did not execute successfully]
oracle002:
/bin/tar: ./bin/ocrcheck: time stamp 2006-12-18 01:15:27 is 34 s in the future
/bin/tar: ./bin/crs_register: time stamp 2006-12-18 01:15:28 is 35 s in the future
/bin/tar: ./bin/cemutls: time stamp 2006-12-18 01:15:28 is 34 s in the future
/bin/tar: ./bin/usrvip: time stamp 2006-12-18 01:15:28 is 34 s in the future
/bin/tar: ./bin/cluvfy: time stamp 2006-12-18 01:15:28 is 32 s in the future
/bin/tar: ./bin/racgons: time stamp 2006-12-18 01:15:28 is 30 s in the future
/bin/tar: ./bin/cluutil: time stamp 2006-12-18 01:15:28 is 29 s in the future
/bin/tar: ./bin/crs_profile: time stamp 2006-12-18 01:15:28 is 29 s in the future
/bin/tar: ./bin/vipca: time stamp 2006-12-18 01:15:47 is 48 s in the future
/bin/tar: ./bin/clscfg: time stamp 2006-12-18 01:15:27 is 25 s in the future
/bin/tar: ./bin/clsid: time stamp 2006-12-18 01:15:27 is 25 s in the future
/bin/tar: ./bin/crs_start: time stamp 2006-12-18 01:15:28 is 26 s in the future
/bin/tar: ./bin/crsctl: time stamp 2006-12-18 01:15:27 is 24 s in the future
/bin/tar: ./bin/evmsort: time stamp 2006-12-18 01:15:28 is 24 s in the future
/bin/tar: ./bin/evmmkbin: time stamp 2006-12-18 01:15:28 is 24 s in the future
but if I check clock sync between two nodes....:
[oracle@oracle001 ~]$ date;ssh oracle002 date;
Mon Dec 18 01:39:33 CET 2006
Mon Dec 18 01:39:33 CET 2006
and from the first node
[root@oracle001 crs]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
oracle002-priv 10.0.0.1 3 u 30 64 37 0.264 8.075 2003.55
and from the second node:
[root@oracle002 crs]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
10.0.0.1 193.204.114.232 2 u 17 64 377 0.652 -30.302 16212.0
[root@oracle002 crs]#
Please, someone can Help me?
Thanks
Adriano Capruzzi
Message was edited by:
adriano.ba

Your 4MEM error code is indeed reporting to you that some of your RAM is not working properly (MEM = memory, i.e. RAM).
The fix for this (replacing the RAM) is normally covered under warranty for a computer as new as yours is. To get the free warranty repair I believe that you do need to bring your computer to an Apple-certified repair center, however. If you order the RAM and do it yourself, you will need to pay for the RAM and also go through the trouble of opening your computer to access the RAM, which is not that hard to do for some people, others prefer to have a technician do that.
I'd suggest that you have Apple do the RAM fix, if only so that the replacement RAM is covered as well going forward ...

Orkut login issues firefox 3.6.13 under Ubuntu 10.10

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/782081]''
Hi,
I am novice to Ubuntu10.10. I am unable to login to the Orkut using firefox 3.6.13 under Ubuntu 10.10. I can login to orkut with same credentials on Windows XP. I guess the problem might be with Java. I have already installed the java plug in. When I type about: Plugins in url, I can see Java(TM) Plug0in 1.6.0_22.I have also installed JDK and other available stuff from canonical partners.
Please take a look and advise some direction.
Thanks for your time.

Thanks cor-el for taking time to investigate and reply. Sorry for the delay on my part, I tried the suggestions you made but it did not help.
Actually the problem turnout with the firewall . I just disabled some firewall settings and was able to login again. I will investigate further to understand how to configure firewall properly to white list some sites.
Thanks again.

Installation Problems with E72

Hi, My problem is basically E72 doesn't finish the installation process of new applications. I've downloaded windows live, opera mini and bloomberg. Each time it asks to install, then give license and certification info, then asks to continue and afterwards nothing happens. It does not finalize installation process. No installation file under Application Manager (except Windows Live), no new application under applications or under menu, no record under log; i.e. nothing happens. I've searched for installation files via PC suite but can not find 'em in sd card, except WL. Thinking that sth wrong with sd card, still not sure...Any Ideas?
Message Edited by segovia7 on 27-Dec-2009 01:19 PM

Couple of users have the same problem please check the post:
SIS problems
Message Edited by rukas on 30-Dec-2009 11:11 AM
Nokia E-72

Software Installation Problems with Media Source and Nomad Explo

Hello Creative Users,
recently I had to reinstall my operating system on the PC. I have an IBM Thinkpad R30 with a Sitecom USB2.0 pccard. I am running WinXP Pro SP2 with all latest updates.
I have a Nomad Jukebox Zen Xtra with Firmware .20.08 and an update harddri've of 80GB.
As long as I was running the software on my previous installation everything worked fine.
I installed the driver .26.02. This recognized the Jukebox. Musicmatch is able to communicate to the Jukebox and recognizes all files on it.
When I installed Nomad Explorer I got an error ctregserv failed because ctin...dll is not found.
When I tried to install Media Source from the original disk it showed an error after 30% Media Source not found. Install Media Source before continuing.
This is what I received now with all verisons of Media Source and Noamd Explorer incl. .30.0.
Can someone help me as synchronizing with Musicmatch is a pain.
Thanks
Rolf

Hi everyone,
as I saw many questions regarding installation problems with Mediasource or Nomad Explorer
in this forum I will answer my own question right here. I was pointed to the answer by a friend with a similar problem on some other software.
When trying to install the Creative software under WinXP SP2 I happens that the registration does not work. the reason are missing write attributes to the keys for
Creative software. To correct that go to: Start, Run and enter regedit. Hit ok and you are in the registration editor.
Find the Creative location unde HKEYS_SOFTWARE. Click right mouse button and choose
properties.
Check full access for your user as well the system user. click on advanced and mark both all the users you want to install from. Check the lower box below the user window sayin something about roghts being propagetd to lower folders etc. Cklick conform and ok, click confirm on previous screen and close regedit.
Now you should be ok and able to install.
Regards
Rolf

WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Installation problems under Ubuntu 6.10

Similar Messages

Maybe you are looking for