INSTALLED NEW INK CARTRIDGE and cancelled the alignment PRINT HEAD IS STUCK

Greeting everyone
I just put a new color 57 HP ink cartridge into my all in one 2210 printer & somehow I cancelled the alignment as it seemed not to be doing anything....and now it will not return the printer head and will do nothing.... how will I fix this?
this is just a printer problem as the printer was working fine before I changed the ink. My Dell inspiron 580 wi PC is working fine and I have been printing direct from my computer to printer every day until my goof up...... intel core (TM) i5 CPU @3.20 GHz 64 bit 8.00 GB RAM
Thank You Mary Svinth in Waldport Oregon Coast
[Personal Information Removed]

Hi - A couple of things to try:
- Unplug the power from the back of the printer.
- Open the top cover, and slide the carriage to the center.
- Remove the cartridge and try reinstalling. Make sure the ink cartridge snaps in and is firmly held by the carriage.
- Plug the power cord back into the printer and power it on.
If that doesn't work, try repeating the steps above, but this time, remove the USB cable, which will completely isolate the printer and narrow down the issue.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Similar Messages

Officejet 8000 - Printer says out of ink even after installing new ink cart. and new head.

My Officejet 8000 - Printer says "out of ink even after installing new ink cart. and new print head. I have tried two new cart. and still gives me the error. A few times it will show all inks are full and print a page or two then says it is out of ink. At one point I even was able to clean the heads and align them but same thing occurs. What is wrong??

Hi Lee_S
Try printing a Self Test Page and see what the Cartridge status & Printhead status is like.
Printing a self test page
Please let me know how you get on..
Thanks, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

"Install new ink cartridges to continue." Error

After just installing new ink cartridges, my HP Photosmart C6180 All-in-One has the audacity, the gall, and the nerve to tell me that I need to "Install new ink cartridges to continue."! Now why, oh why, in the Wild World of Wonka, would my printer do that? Doth mine eyes deceive me, or does my printer hate me? I can imagine no other reason why it would do this. Perhaps I am overreacting, but I feel genuinely insulted: I didn't have the ink cartridges refilled like some people do, and I bought all-new ink cartridges.

Hi, lmichael14!
So that the Community can help you better, we will need to know exactly which model of printer you're using.
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Officejet 4620 Brand new HP Black ink cartridge and it won't print black at all

Greetings, my printer recently ran out of ink. So I purchased a set of cartridges from Staples. I installed them and ran the Clean Printhead function. I now have great color and NO BLACK. I ran the clean printhead function numerous times. Its so frustrating to watch the evolution of printers over the last 2 decades go from reliable to unreliable all for the purpose of financial gains. I've had printers since the 80's, I used printers when they came with ribbon cartridges, which hardly failed, though they would indeed dry out. At least when they did dry out you would be able to put a new one in and continue. Now they have engineered replaceable printheads (because they were made knowing they will fail), ink cartridges that are not interchangeable (knowing that once you've had it with one printer model, you'll most likely switch to another brand or model) which uses a DIFFERENT model ink cartridge. All for finacial gain. Between my office and home, I've been through 4 printers in the last 2 years. I was a loyal Lexmark fan, untill my old one died and I purchased a new one, first thing I noticed was the changeable printhead, and I said to myself, uh oh, thats going to fail, and so said, so done, within 3 months of using the printer, Lexmark sent me 2 printheads and 2 sets of replacement inks free of charge. I still have a set of ink and a printhead because the LCD screen went blank, lol. Had to toss it. Ended up switching to HP which I believe is made in the same factory as Lexmarks after much comparison of models. Now I have the newest HP at my office and its been great thus far and SUPERB on ink usage, THUSFAR. I'm almost afraid to find out what my future has in store. I know I ran on alot off topic, BUT HP, YOU SHOULD BE ASHAMED OF YOURSELVES. I've now wasted $60 on a new set of cartridges and will most likely need a new printer since my warranty is expired. SMH. Bad Business!!!!
This question was solved.
View Solution.

Is your printer still in warranty? You can check with HP's warranty tool here. Are you located in the US?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Photosmart C4640 installing new ink cartridges

In the past, I typically install the multi package (both black and color) into the machine when it runs out. Once, I installed only the color cartridge (because the black cartridge still had plenty of ink in it) and the printer would not accept the new color cartridge. So I took out the full black cartridge and installed a new color and black cartridge and then I was able to proceed with my printing. My question is.....is that normal to have to replace BOTH cartridges when only one needs replacing? It would be less expensive to replace only the color cartridge....the twin package of color and black usually runs about $40.00!!!! Is there an alternative to $40.00 a pop!? I use my printer alot.
This question was solved.
View Solution.

Hi @ted48,
Welcome to the HP Forums!
I noticed that you were unable to continue printing unless you replaced both cartridges instead of one with your HP Photosmart c4640. I am sorry to hear that, but I am happy to look into this for you!
This is definitely not normal for this printer, for you to have to replace both cartridges. It is a possible sign of a hardware issue.
In the meantime, I would recommend this guide, A 'Cartridge Problem,' 'Cartridge Failed,' or 'Incompatible Cartridge' Error Message Displays on the....
Hope this information helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Need help installing new hard drive and wiping the old one for Windows XP.

I’ve searched to try and figure out the answer to my question and haven’t been too successful, so hopefully someone can help me out. I have a new Mac Pro that I haven’t even turned it on yet because I’m waiting for some upgrades to show up. Here is what I plan to do, I’m unsure of what I need to do and what order to do it in:
It has a stock 250GB hard drive that I plan to wipe and install Windows XP on. I have a new 750GB drive coming that will run Leopard which will be my primary OS. Once I have this set up, I will probably try running VM Fusion which I assume I can install later on. Here are my questions:
When I put my new blank 750GB drive in to install Leopard, will OS X boot up off the Leopard install disc to then allow me to do the install?
When do I wipe the smaller drive to put Windows on it, before or after I’ve installed Leopard on the new drive? How should I wipe it, using the Bootcamp setup assistant or Disc Utility? If I wipe it after installing Leopard, will I be prompted for which drive to boot from?
Thanks in advance for any help.

I don't use Windows, but I think the proper order to do things would be this:
First, if your Mac Pro came with Tiger installed, when you start it up for the first time, you'll need to go through some initial setup, create an administrator account, etc. You can go ahead and do this.
Afterwards, you can install your 750 GB drive. Next, you can insert your Leopard disk, and go to System Preferences/Startup Disk to choose to start up from the disk. (Alternatively, if you just choose "Install Mac OS X" from the disk, it will instruct you to restart the mac.)
When the mac boots from the disc, install Leopard on your 750. Once you have that done, and have booted from that drive, you'll be able to erase your 250 in Disk Utility, and then install Windows on it.

My MG3200 printer is showing "printer not responding" after installing new ink cartridges.

Ever since I replaced the ink cartridges in my printer it won't print showing a not responding error. I have tried troubleshooting but still doesn't work

Hello,
If you are using the printer on a wireless connection, check out the link below for step-by-step procedues you can try:
http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secu...
If you are using a USB connection, try this:
http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secu...
However, if the issue persists, please reach out to our technical support team at http://bit.ly/Phone_Support
Thanks!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Windows 7 Enterprise is not genuine after installing new hard-drive and cloning the old one

I retired from my job as a university professor two years ago, and they let me keep my laptop computer, which is a Dell Latitude E4300 with Windows 7 Enterprise installed. I do not have any of the original disks for Windows. Recently, the hard-drive began
to fail, so I replaced it with a new one, cloning the old hard-drive onto the new one. Soon after that, a popup window began appearing saying that this computer is not running genuine windows. One important consequence of this is that I can no longer use Windows
Update, so I have concerns about security. If I go to the control panel under “System”, it says windows is activated and gives me the Product ID. I have talked to tech support at Microsoft, and they tell me something along the lines of the following: that
the problem is the new hard-drive is not recognized as being licensed to use this copy of Windows, and that I should post a question on one of the forums asking this: How can I reinstall Windows 7 Enterprise on the new hard-drive? Any assistance will be much
appreciated.
PS I have no idea which forum this should go under, so pretty much just picked one randomly.

Thank you for the reply. Below is the diagnostic report:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-*****-*****-XVH7B
Windows Product Key Hash: juq6zzHf9lIH1XRY1VK2YrQYWO0=
Windows Product ID: 55041-011-1350732-86681
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {04DEBE17-699E-4D0A-A59D-3C196C2C84FE}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{04DEBE17-699E-4D0A-A59D-3C196C2C84FE}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-011-1350732-86681</PID><PIDType>6</PIDType><SID>S-1-5-21-240060965-2561850352-3419627931</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Latitude E4300                  </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A21</Version><SMBIOSVersion
major="2" minor="4"/><Date>20110111000000.000000+000</Date></BIOS><HWID>68B63A07018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific Standard Time(GMT-08:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL
</OEMID><OEMTableID>M09    </OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Enterprise 2007</Name><Ver>12</Ver><Val>1DB36DFCEA6586</Val><Hash>uf4pjarnSPRhy0+iMrKzL8KTLeY=</Hash><Pid>89388-707-1262377-65112</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12" Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App
Id="44" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-011-135073-03-1033-7600.0000-0402011
Installation ID: 017002020180881956515246274583104396790522223804443953
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: XVH7B
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 6/6/2014 2:38:03 PM
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x000000000001EFF0
Event Time Stamp: 5:30:2014 15:10
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\sppobjs.dll
Tampered File: %systemroot%\system32\sppc.dll|sppc.dll.mui
Tampered File: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Tampered File: %systemroot%\system32\sppwinob.dll
Tampered File: %systemroot%\system32\slc.dll|slc.dll.mui
Tampered File: %systemroot%\system32\slcext.dll|slcext.dll.mui
Tampered File: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered File: %systemroot%\system32\slui.exe|slui.exe.mui|COM Registration
Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Tampered File: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Tampered File: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Tampered File: %systemroot%\system32\drivers\spsys.sys
HWID Data-->
HWID Hash Current: MgAAAAEAAQABAAIAAQABAAAAAwABAAEAeqgiDXhybAimeiQ1hEDag8ysrmAi+8rbRso=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name   OEMID Value   OEMTableID Value
APIC           DELL         M09
FACP           DELL         M09
HPET           DELL         M09
BOOT           DELL         M09
MCFG           DELL         M09
____           DELL         M09
ASF!           DELL         M09
TCPA
SLIC           DELL         M09
SSDT           PmRef       CpuPm
scott cohen

New ink cartridges in Deskjet 5525 but black won't print or prints in light gray

I installed new ink cartridges. Black prints as very light grey or not at all in some instances

Hi @rhare
I see you are having troubles with your black ink.
Please complete all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages Although I hope this resolves the issue, it might not. As you have a 5525, If the issue persists, I would suggest calling HP Phone Support, even if your printer is out of warranty, as you may require a replacement printer.
The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
Please let me know if the document resolves the issue, or if you called HP and the outcome of the call. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printer Services Error Can't align printer heads.

Can't find the toolbox to align printer heads. crooked lines. HP Deskjet D2445. Took off software and put it on again. When I select the "Printer Services" button it simply states, "Unable to perform the operation". I have a window's XP. Never had a problem before, but I didn't realize until just recently that the "align" printer heads prompt after inserting new ink carts. Hasn't come up for some time now. Any thoughts would be greatly appreciated!

Can you reply with your email address, but in the form of user_name at domain_name dot com (dot country if applicable). I have some files to send you to replace the Canon files that are possibly causing the error.
Also, for your reference, you posted in the Lion forum but you have Mtn Lion. If you posted in the Mtn Lion forum I would have got to you sooner.

Epson Printer Utility Lite in 10.6.8 has no Align Print Heads Feature

I am running 10.6.8 with my Epson Stylus Photo R200. The printer driver is now called Epson Printer Utility Lite, but no longer has the Align Print Heads feature which I really need to use. I would appreciate finding out if there is a way to do this automatically as in earlier systems. Thanks in advance for your help.

Using this > Epson 2.7 Printer Drivers in 10.6.8 with my Epson.
The Print Head Alignment is available when I go to System Preferences > Print & Fax and select Options and Supplies....
then select Utility > Open Printer Utility
and select Print Head Alignment.
Dennis

How can I get my HP DeskJet 6540 to recognize the new ink cartridges I installed?

Hi everyone. I have an HP DeskJet 6540 printer and I replaced the ink cartridges. After I replaced the cartridges, I aligned them and then did a test print. I noticed that the blank ink didn't print. I opened system preferences, and then I opened the printer utility. It says, "Device Status : Pen Failure." Current Supplies Levels says, "The current levels for the selected printer are shown below...Cartridge on the left (tri-color 97) is unknown and the the cartridge on the right (black 96) is missing." Oh, I forgot to mention that the print cartridge light on the left side is flashing. I went to the HP support website and it says that the problem could be an incorrect print cartridge, incompatible print cartridge, or problem with the (left/right) print cartridge. The solution they offered was to remove, inspect and reseat the problem cartidge. It also said to clean the problem cartridge contacts. I did that and it still gives me the same results. I even reset the printer but still got the same results...
So the next thing I try is the OTHER cartridges listed as compatible with my printer which is 94 (black) and 95 (tri-color). I bought the new cartridges, placed them in the printer and I still got the same message from the print utility. I took the latter cartridges back and got a refund and explained that none of the compatible cartridges are working with my printer. I kept the 96 and 97 cartridges in the printer and the light on the left continues to flash so now I'm here asking if anyone knows how I can get my printer to recognize the new ink cartridges I installed? Are there any other solutions that I have besides throwing the printer out of the window? :-)
Thanks everyone ;-)

With all that you have done it does sound like the printer has a fault. If you haven't tried turning off the printer for several minutes, then this would be worth trying (maybe you have done this when you say reset the printer?).
If the cartridge light on the printer flashes when you turn the printer back on then it sounds like a hardware fault - not the driver or the operating system. And this is not usually something a user can resolve so it would need repair. And for the cost of a new printer, why would you bother.
If you plan of sticking with HP and getting another model that can use the 96 & 97 cartridges (let's face it, they often cost more than the new printer), then take the two existing cartridges to the store and see if they will let you check they are okay. No point throwing them out also if they still have a fair bit of ink still in them.

Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error.

Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error stating please insert black ink cartridge.
Please Help

Make sure it is a genuine HP cartridge. Take it out and clean the contact on the cartridge and in the printer. Try again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to align with new ink cartridges, deskjet F4480

I am having trouble with my printer doing the alignment after I put in 2 new ink cartridges. The help section to align gave me instructions but they didn't work. I just downloaded/installed my printer device driver update to see if that would help. NO luck so far. Mu printer is a F4480 Deskjet

Hello @huidel,
Welcome back to the HP Support Forums! I see you are trying to align the cartridges on your HP Deskjet F4480, you have tried following the steps and updating the driver with no success.
1. What is your current Operating system, Windows or Mac and which version?
2. How did you install the DJ F4480, using the software CD or download?
Click here to download and run the HP Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
I look forward to hearing from you!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Will not print black ink after installing new HP cartridge

HP Officejet 4620, Windows 7....installed new HP black ink cartridge and now it will not print black at all. I followed all online tips in the help section, even cleaned the vents on the cartridge itself but only prints blank page. No error messages are shown. Diagnostics ran and says all is working correctly. Also cleaned printheads through 2 cycles still nothing. Any other suggestions? It was working just fine before inserting new black cartridge.
This question was solved.
View Solution.

I just spent 1 1/2 hours on the phone with HP Tech Support but it was worth it. They are sending a replacement printer no charge to me (expect I chose to pay extra for next day shipping). Even though my printer is out of warranty!!! I normally buy HP products anyway but will definintely stay with this brand based on their excellent customer service and support. Thank you once again for your initial help online and for directing me on the right path!!!

INSTALLED NEW INK CARTRIDGE and cancelled the alignment PRINT HEAD IS STUCK

Similar Messages

Maybe you are looking for