Installed Yosemite - Canon MF8300C printer won't print or scan to the MAC.

I recently installed the Yosemite and now my Canon MF8300C printer will not print or scan.
Printing - I get an error message: Stopped - 'Filter' Failed X pages
Scanning - I get the device to show up but when I select Open Scanner nothing happens.
I have had this printer on Mac Mini for 2 years now. I did not know it at the time but this printer and MAC have always had handshake issues. I often have to turn it off and back on to get the wi-fi address to be recognized, or have to re-install the drivers, even though I have downloaded directly from Canon. This is a top notch home office printer why have the drivers not been made compatible by now?
I can print fine to my trust old Samsung ML-1650 but that does not solve my color or scanning needs that worked up until I installed Yosemite. What gives?

With regards to printing, you need to have installed the MF v10.4.0 driver that supports Yosemite. If you have installed this driver and you still get the Filter failed error, then I suggest you remove the MF from Printers & Scanners and then open Finder and select Go > Go to folder. Then enter /Library/Printers/Canon and press the Go button, With the Canon folder open you will see a folder called CUPS_MF_Printer. Trash this folder and then empty the Trash. Restart the Mac and run the MF v10.4.0 driver installer again and add the printer. Now see if it prints without error.
As for the Scanner, while in the Canon folder you should also see an entry called MFScanner. Trash this folder if present then run the ScanGear v2.3.0 installer for Yosemite. Now see if you can scan, making sure that you do have the Scan button selected on the MF and set to Remote Scanner.

Similar Messages

How do I install Yosemite on a 2nd HDD I have added and have the Mac Pro boot from the new HDD?

My MacPro's HD seems to be failing. None of the tests I run indicate that, but I get constant spinning balls and everything takes a long time. I bought a 2nd HDD and installed it in the 2nd bayou my Early 2009 Mac Pro. I formatted it and want to install Yosemite and have the Mac boot off the new drive. It is currently running OS X 10.9.5. When I go to update to Yosemite it begins to download. Will it give me the option of which drive to install on? Or will it just upgrade the original Mac's HD?

A Samsung 850 EVO 128GB SSD $75 now and makes a huge improvement. But get the 250GB which is $99. 500GB $199
Wish you asked us first Awesome prices and performance.
Output from Etrecheck is an easy "quick check" of what your system is carrying around and what baggage it has.
Move data to a 'data and media library" drive.
Use CCC to skip the user data folders except ~/Library and clone to SSD
And might want to save the installer .ESD package for use as clean installer and to be able to boot from.

I just hooked up my Canon MP830 printer/scanner/fax to my MAC and can print but can't scan. Anyone out there know what to do with this?

I just hooked up my Canon MP830 printer/scanner/fax to my MAC and can print but can't scan. Anyone out there know what to do with this?

Have you downloaded the approriate Snow Leopard drivers for that printer? Make sure you get the appropriate and latest MP Navigator, as you start scans from the computer, not the all-in-one. Get them from http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp830#DriversAndSoftware

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

Will the iPad Mini print to / scan from the HP 7280; with USB cable?

Will the iPad Mini print to / scan from the HP 7280; with USB CABLE?
Thanks, everyone...
---sue h (Apple novice)
iPad Mini

https://itunes.apple.com/us/app/genius-scan-pdf-scanner/id377672876?mt=8
I use this app. It takes a photo and turns it into a PDF (the photo that you take with your iPad/iPod)

My mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

my mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

Maybe this???
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

My mac is installing yosemite and reboots but then there is no installation and the old system (mavericks) is still there?!

my mac is installing yosemite and reboots but then there is no installation and the old system (mavericks) is still there?!

Re-downloading of films is currently only available in the US (due to film studio restrictions), and not all films can be re-downloaded there as not all film studios are allowing it. Have you not got a copy of them on your computer and/or on a backup ? If not then you can try contacting Apple, but they are under no obligation to let you re-download them : http://www.apple.com/uk/support/itunes/contact/

Please HELP me install my Canon ip4300 printer drivers

Hi,
I just bought a Canon ip 4300 printer and I can’t get my computer
(ibook G4 14 in 1.0GHz) to install/recognize the driver.
I tried the installation CD, and downloading the latest driver from Canon.
But no luck.
When I go to the Printer Set Up Utility and try to add the printer, the computer can find the printer over the usb cable. But when I select it, it can't auto find the driver. It just gives me a selection of outdated Canon gimp print drivers.
I called Canon and they walked me through installing the drivers in the root user account... but that didn't do anything either. They said I would have to call Apple -- that it was likely something to do with permissions???
Since I don't have any Apple support left, I came here.
Please, if anyone has any ideas, I would love to hear them.
Thanks.
ibook G4 14 in 1.0GHz Mac OS X (10.4.8)

Start by repairing permissions (Disk Utility).

Hello, I currently have a MacBook snow leapord and i'm trying to connect it with my Canon MP560 printer, i put in the CD and installed everything properly but now when i add a printer it says a Queue already exists, i click continue and nothing happens???

Hello,
I'm using a MacBook Snow Leapord and I'm trying to connect it with my Canon MP560 printer/scanner.
I installed the CD and followed along with the manual and did everything it asked, at the end it told me it was finished.
So then I went to go print something and an error had occured so i went to the file menu on Microsoft Word for
Mac and clicked Print/Add Printer and then i click on the Canon MP560 series-1 as it was the only one to click on.
When I did it stated that I already has a Queue for this printer and if I'd like to add a new one so I clicked continue and nothing
had happend. PLEASE HELP
sincerely,
Laura.

I would recommend to download the driver appropriate for your system from the Canon webiste or, after installing it, to run software update and it will detect it for you.
If you have the last driver appropriate for your system, you may wish to reset the printing system. To do this, go to Sys prefs/print and fax and, upon clicking minus button, also press Option/alt key. You will be asked to confirm, do it. Then, add the printer by pressing plus button, it should work now.
But, before doing this, download the last good driver, CDs usually contain outdated drivers.

Installing a Canon iP4200 printer

My problem is getting 10.4.3 to recognise the print driver.
I have followed the installation instructions many times and always come up against the same problem.When I have resarted the computer and go to the print utility and push add, an extra window comes up and recognises the printer then searches for the print driver. But the add button stays dimmed, and yet again I still can't access the printer. I have used both the installation cd and also downloaded another driver from the Canon site .But still no success.
I'm hoping someone else has come up with this problem and successfully solved it.
I'd also like to wish you all a happy new year Gordon Armstrong.

Hi,
A couple of days back I made a similar posting:
"I have a new iP4200 Canon printer to be accessed by two iBooks (both running OS 10.4.4 and an iMac G5 running 10.4.4.
The Canon software CD was difficult to download to iMac but better with the iBooks.
iBooks pick up printer fine via wireless, but cannot appear to get drivers to download onto iMac. Have tried direct downloads of driver from several Canon sites but to no avail.
Error message in Printer Setup Utility stage is always the same:
"an error occurred while trying to add the selected printer"
Seems it cannot locate the driver - which Spotlight cannot find either. Installing 10.4.5 is no help either.
Both Canon and Apple support offer little practical help.
Is this a one-off problem with my iMac?"
Reading your post and responses it seems I'm not alone.
I tried the newest driver and found it no good either.
My dear wife tells me to return the printer, but it is a beauty (when I use the lappies wirelessly) but that is the frustration - works on some and not on the desktop!
If you have any updates (or is it still a problem?) please tell me.
Thanks.
Mike

What drivers do I need to install for my MG6360 printer to work with a Mac with OSX10.8.5?

I have a PIXMA MG6360 printer that needs its software updating to return its full features but the Canon support line in Australia has prescribed several different options with no two alike and none providing the full features I once enjoyed. 'Phone and email support responses are all uniformly poor and I cannot get a straight story from any of the technicians I've encountered so far. Currently, they've stopped responding altogether!
I know where to download the latest software, but I'm not clear about which packages I should install and in what sequence and I cannot locate a definitive answer in the knowledge base.
Can someone tell me which drivers etc I need and the sequence in which I should load them.
I'm assuming that I have to uninstall the existing software and printer from the Mac (MacBook Pro 15", Late 2012 with OSX 10.8.5) first. That's about the only thing the techs agree on so far!
Also, does Canon update its software periodically and provide either automatic downloads or email warnings to update its users?
All help gratefully recieved.

With reference to this article from Apple that lists the models of printer drivers available from Apple for Lion and Snow Leopard, there are a couple of HP Photosmart 55xx printer drivers in the list. So if all was well with your iMac then the driver should be downloaded and installed when you connect to the printer. With this not happening you can try installing this HP Driver update. It contains all the HP models in that driver list - that's why its over 500MB - and it may be just what you need to get this printer connected.

HT201232 I have my Mac working on OS X Yosemite, i am having problems getting photos of my SD card inserted in my printer port across to the mac also I have aSamsung S4 mobile, same problem can please someone please help me

Hi I have my Mac which works off OS X Yosemite, I have photos stored on an SD card inserted in a port off my Epson printer which is attached via usb. I cannot get photos across to the library on the Mac am also having the same problem getting photos off a newly purchased Samsung S4 mobile onto the Mac could someone with a bit of technical know how please assist me ..thank You

Try what Terence Devlin posted in this topic:
Terence Devlin
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Officejet Pro 8600 Plus won't print or scan wirelessly using Mac OS 10.

Mac OS 10.9
Wireless
My printer was working fine until today. Then when I used the control panel to scan a page I went through the steps and got to scanning and got the message I needed to enable "Scan to Computer" in the HP Utility. I went there and it was unchecked. Seems I had this problem every time I did a new scan job in the past. It wouldn't retain than check. So I checked it and after awhile I got the message "Communication Error" and to check my connections and if that didn't work restart my computer and printer. I did that and also restarted the router but it didn't help.
Then I tried printing from Word, which has always worked but it didn't this time. The printer icon on the right of the dock came up, bounced a few times then disappeared with nothing happening on the printer.
So I deleted and reinstalled the printer. No help. I downloaded and installed HP software and firmware updates. No help. I went through wireless setup. No help
BTW, all along I got good "Wireless Network Test" results. I says it's connected but nothing happens when I try any functions of the printer.
If I can find a USB cable I will try to see if wired works.
Any suggestions would be appreciated.

Hey @neoflyer,
I would like to assist you today with resolving the wireless printing and scanning issues you're experiencing on your HP Officejet Pro 8600 Plus e-All-in-One Printer on your Mac OS X 10.9 Operating System. You mentioned that you have powercycled the devices, reran the wireless setup, and uninstalled and reinstalled the software and drivers to no avail. I'm going to suggest a few additional troubleshooting steps to verify if this is a computer issue or a network issue.
Step 1: Gather the IP and Open the EWS:
1. On the screen of your printer select the wireless button:
2. Under the Wireless information you should see your IP address
3. Open up your internet browser on your Mac computer and in the website address bar just type in your IP address. Please do not include www.
4. After you enter your IP address in the website bar go to that website
5. If the website for your printer opens than that proves with 100% certainty that your printer and computer are 'talking' to each other on your wireless network. If the website fails to open than you have a network communication issue with your router.
If the website fails to open please powercycle your network again:
How to Properly Powercycle a Network:
First, unplug the power cable to your Router
Once your Router is unplugged, turn off your printer
Next, shut down your computer
After 30 seconds to 1 minutes, plug your Router back in
Next, turn on your printer
Turn on the computer
After a few moments check on your computer and ensure that the internet is working. Once it is, hit the wireless button again on the printer to see if your printer got a new IP address. Using the IP address enter it in the address bar of your internet browser and now see if the website for the printer opens.
If the website for the printer opens successfully please follow the steps below:
Step 1: Uninstall Drivers and Software:
From the computer desktop, double-click the Macintosh HD, and then click Applications.
Click the Hewlett-Packard folder.
Double-click the HP Uninstaller, and then click Continue.
Select the product to uninstall, and then click Uninstall.
When prompted, type the Administrator name and Password, and then click OK.
From the Macintosh HD menu, click Users.
Click the correct user name.
Click Library.
Click Preferences.
Click and hold the cursor on the first file that starts with "HP," and then drag the file to the Trash icon on the taskbar. Complete this step for each file that starts with "HP."
Close out of Preferences.
Click the Trash icon on the taskbar, click the Empty button, and then click OK to empty the trash.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
1. Please click the following link to download the appropriate Mac OS X 10.9 drivers for your printer: Mac: HP Officejet Pro 8600 series Full Feature Software and Drivers
2. Once downloaded, run through the step by step screens to reinstall your network printer
3. Once the printer is reinstalled, attempt a print and a scan!
Please let me know if these steps resolved your issue. Thanks for reaching out to the HP Support Forums. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Printer problem after upgrading the Mac HD disk

After replacing the Mac HD on my Mac Pro, and copying all the "old" data from the "old" Mac HD using Migration Assistance, I cannot print. Getting "communication error". Re-installing drivers does not help. The printer is a Canon MF4350d connected over USB. Is there files somewhere (USB drivers?) that may affect this issue. Or can how can I delete all (Canon) printer drivers and make a clean install?

First, make a backup of all your data or you entire system. Then you will follow the instructions in the link below to erase the Yosemite volume and reinstall Yosemite from scratch. After assuring it is working properly you can restore your third-party software from original media. Be sure the software is compatible with Yosemite. Finally, restore your data from your backup.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

Installed Yosemite - Canon MF8300C printer won't print or scan to the MAC.

Similar Messages

Maybe you are looking for