Installer cannot access reistry key

HI
attempting to reinstall the All in one driver package for the HP Photosmart premier C4100 b the following error apears
'the installer cannot acces this regitry key Please ensure that the installer has access to the registry and click retry to continue installation
Registry key: HKEY_LOCAL_MACHINE\SYSTEM
Manufacturer:microsoft '
I can access the registry key via regedit and it all apears fine, I have performed CCcleaner registry check and fixed all problems(this issue was not flagged up) I am running Norton Antivirus and have disabled all services during installation I have downloaded fresh versions of the installer
I have had this driver package working successfully on this machine before
I'm running windows 7 64 bit on a HP Pavillion HPE tower
reinstall was due to continual dropout of service on wirless function of the printer and scanner

Do you have administrator access on your windows user account? A suggestion from the user Zaffiri in the following thread that you may try:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Photostmart-C4400-Problem-Enum/td-p/88...
Just hang on, someone more familar with printer may get to you.
Thanks!
Harry
Norton Support

Similar Messages

New v7 installation cannot access any help/online features via photoshop

Hi, have just bought new version 7, and having problems when trying to access help, on line support, photoshop elements online and one line learning resources. any online access automatically opens up MS Word 2007 (have Office 2007) which then just shows the hyperlinks via a word doc.
I have reinstalled 3 times, each time, complete uninstall, cleared rubbish bin, registry and temp files etc plus rebooted computer after each installation. I have also shut off nortons virus and firewall before installation. Also followed putting full file installation onto desktop and install from that, again to no change in my access. This is annoying as I would like to have direct access to the help files, and online learning.
Even when the first screen pops up giving you the options to go to organizer, edit etc, anything I click on that will not open any internet web based access.
I am using a fairly new laptop, only a few months old, has Visa Home Premium, Internet Explorer V 7.0.6 and I generally keep everything up to date with updates but confused by this problem.
Any suggestions on the problem would be great. I am a registered user and own all the disc's this was not a download of the program. Have not had this problem before with any versions, including from Version 1.
Ailsa

I wonder if this Adobe tech note applies:
http://go.adobe.com/kb/ts_kb409025_en-us
It describes the situation in which the Windows registry settings for the HTTP protocol are damaged, so PSE doesn't know which browser to open when it tries to do some Web operation (such as opening online Help). It seems similar to your situation -- it appears that perhaps somehow Word has been configured as the "browser" on your system!
Since this involves modifying the registry for a core part of your system (handling HTTP), I'd follow the instructions extremely carefully (they included making a backup of the registry). Better set a Windows restore point before undertaking this.

Why can't I sign in to vtok, I cannot access the key pad on my iPad when I try to sign in to vtok. I was able to do it yesterday.

I am unable to log in on vtok this morning. I was able to do so till yesterday. The key pad does not pop up to type my user I'd and password.

Update: Managed to fix this by going into Settings > Safari, then under Privacy & Security i changed 'Block Cookies' from 'Always' to 'From Third parties and advertisers'
Not sure how the setting was changed from its default but yeah.
After this I was able to sign straight in with no problems!

Cannot access key storage in Visual Administrator

Hi,
I cannot access the key storage node (==> Host ==> Server ==> Services ==> Key Storage) in Visual Administrator.
Everytime I click on the key storage node an error message pops up. It says:
<b>IAIK security library not found
java.lang.NoClassDefFoundError:iaik/security/provider/IAIK</b>
According to SAP (http://help.sap.com/saphelp_nw04/helpdata/en/e9/a1dd44d2c83c43afb5ec8a4292f3e0/content.htm) the SAP Cryptographic Toolkit has to be installed to use the Key Storage functionality of the Visual Administrator. The SAP Cryptographic toolkit has been deployed.
Does anyone know where I can get that library and where I am supposed to put it? We work with <b>SAP NetWeaver '04 WebAS Java 6.40 SP14</b>.
I appreciate any kind of help.
Regards,
Martin

Hi,
The missing class should be in the iaik_jce.jar
archive. This archive is present in folder \usr\sap\<SID>
\sys\global\security\lib\tools(or)engine.
Copying this archive to the visual admin's <j2ee-install>
\admin\lib folder, this workaround can solve your issue.
You may also need unlimited strength jurisdiction
policy depending on your JDK version. For more info:
http://help.sap.com/saphelp_nw04/helpdata/en/e9/a1dd44d2c83c43afb5ec8a4292f3e0/content.htm ->
Deploying SAP Java Cryptographic Toolkit.
Also check SAP Note: 891666
Hope it helps..
Regards
Srikishan

I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back-up app.

I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back up app.
Have used Superduper app. to back up and checked back-up occasionally to see if all files present and appeared OK.
I had previously started machine using original CD #1 to try and replace Eudora which was acting up. Did not knowingly touch Safari.
Running iMAC System 10.4.11
How can I successfully download from the Maxtor back-up?
Ivan

Further info.
I checked the content of my other back-up and found the bookmark Bookmarks.plist in the library under Safari
Dumped the existing copy in the computer and drag-dropped the back up. All bookmarks restored.
Solved the Stickies problem by using Spotlight to find file "stickiesdatabase" and did a drag- drop to replace file. All data restored.
Re Ical data loss. Used Spotlight to find iCal document in Library - Preferences where I found com.apple.iCal.plist in folder.
Got ready to make change but did not immediately remove file. When I returned to Preferences folder to grab above document,
the readable descriptors had been changed to code consisting of some upper case letters and/or single symbols!
So now I cannot tell which is the symbol iCal.plist
Thanks for leading me so far, but how do I find that plist for my calendar?

Exchange active synch - I keyed the wrong passcode and now it is not asking for a passcode just tells me that I cannot access my business email.. Is there any way to reset ?

Exchange active synch - I keyed the wrong passcode and now it is not asking for a passcode just tells me that I cannot access my business email.. Is there any way to reset ?

press and hold both the power and home buttons until the apple logo appears and then let them go. Wait till the phone restarts and then try

I can't update my itunes and it shows me this message: The installer has insufficient privileges to access this directory: C:/program files/itunes. The installation cannot continue. Log on as administrator or contact your system administrator

i can't update my itunes and it shows me this message: The installer has insufficient privileges to access this directory: C:/program files/itunes. The installation cannot continue. Log on as administrator or contact your system administrator

Hello PamelaFox14,
Thank you for using Apple Support Communities.
It sounds like you need to log in as the administrator to update the iTunes application properly.
Take a look at this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
This section in particular:
1. Make sure you have administrator account access
To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
Windows 7: How do I log on as an administrator?
Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
All the best,
Sterling

Cannot Access EAC/ECP on exchange server 2013 after installation

Hi,
I can not Cannot Access EAC/ECP on exchange server 2013 after installation . Error 404.4 code 0x80070002
Help!
Thanks,

Hi Florin
Did you try accessing EAC by using below link
https://<Exchange_2013_CAS_FQDN>/ecp?ExchClientVer=15
Please access EAC via Internal URL: https://<CASServerName>/ecp
Finally ensure that you have logged in as administrator as well as this might be problem as well
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

How to contact Adobe support to reset the key since my old computer is dead and cannot deactivate the key before installation

I cannot deactivate the key on a dead machine, how can I check with the support team (on key resetting)?

Oh I chatted and when she found out it was CS 5 this is what she said.......
Supriya Bhat: But the product for which you need help is no longer supported on chat
Supriya Bhat: so i will have to please guide you to forums.adobe.com
kevin starr: Unless the forums can help me with a SN# trouble it will be a waist of time
Supriya Bhat: Forums can help you with the issue
Supriya Bhat: surely
So it is a circle they send me here you send me there. I did find this.......
I cannot access my previous computer
Don't have access to your previous computer? Did you upgrade your computer's hardware, replace a hard drive, upgrade your operating system, or format your computer before deactivating your software? Ask Adobe Support to help you deactivate from a machine you cannot access.
Have your serial number or Adobe ID ready, and then contact us.
Now the "Contact us" part is the tricky thing. I am going on 5 hours trying.
HELP!

Trying to download ITunes latest version on my Windows XP and I get this message "The installer has insufficient privileges to access this directory: C:\Program Files\ITunes. The installation cannot continue. HELP!!

Trying to download ITunes latest version on my Windows XP and I get this message: "The installer has insufficient privileges to access this directory: C:\Program Files\ITunes. The installation cannot continue. Log on as administrator or contact your system administrator." HELP?

Hello PamelaFox14,
Thank you for using Apple Support Communities.
It sounds like you need to log in as the administrator to update the iTunes application properly.
Take a look at this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
This section in particular:
1. Make sure you have administrator account access
To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
Windows 7: How do I log on as an administrator?
Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
All the best,
Sterling

I tried to reinstall itunes, in the middle of the installing process i get the message "The installer has insufficient priviliges to access this directory:C\ProgramFiles [x86]\iTunes. Installation cannot continue.Log on as Administrator or contact your sy

I tried to reinstall Itunes so i can have my computer interact with my iPod Classic.I uninstalled all the previous programs per apple's instructions.Part way during the reinstallation an error message comes up: The installer has insufficient priviliges to access this directory: C\ProgramFiles[x86]\iTunes.
Installer cannot continue.Log on as administrator or contact your system administrator.
I am the administrator on this HP computer.

Hello PamelaFox14,
Thank you for using Apple Support Communities.
It sounds like you need to log in as the administrator to update the iTunes application properly.
Take a look at this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
This section in particular:
1. Make sure you have administrator account access
To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
Windows 7: How do I log on as an administrator?
Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
All the best,
Sterling

Cannot Access the Service Partition after installing Lenovo Driver and Application Installation

I recently upgraded my Lenovo 3000 H210, M/T 5355-2NU from Windows Vista Home Premium (64-bit) to Windows 7 Home Premium (64-bit) with the media received through the Windows 7 Home Premium Upgrade Fulfillment Program.
I installed the 64-bit version of the Common Components Installation v1.0.0.8 and restarted the computer and then installed the 64-bit version of the Lenovo Driver and Application Installation program, v5.1.0.0900. After
restarting the computer, I receive a message box stating "Cannot access the Service Partition". If I click on
Lenovo Driver and Application Installation on the Start Menu, I receive an error that the installation has not
completed. Restart to complete the installation. If I restart the computer, I am back to the first error.
Any idea how to resolve this situation?
Any help is greatly appreciated. Thanks in advance.
-Larry

I am having the exact same problem. It's driving me nuts. I also downloaded and attempted to reinstall the factory software from Lenovo's site. It installs but will not launch, giving me the following error message: "This software is for intallation on a Lenovo computer." Or words to that effect.
Hopefully someone knows the answer. Tried tech support twice. Ugh... Thanks in advance.
Lenovo 3000 H210 Desktop, 64-bit, Intel E5200 Duo Core, 4GB RAM, 320 GB Hard Drive

Upon reinstalling Firefox, I cannot access my sync key-there is no "Manage Account"

Once upon a time , after updating Firefox & before the treacherous AVG toolbar wreaked havoc- I had synced my new iTouch with Firefox.
They were living happily ever after until the above mentioned treachery took place. The devastation left no alternative but to uninstall my beloved Firefox & reinstall.
All went smoothly until... I tired to reunite my iTouch with it's long lost Firefox Sync.
The Fairy Tale ending is in tatters as I write this (drat you AVG toolbar!)...
simply put:
- going to Tools->Options->Sync only allows me to Set Up Firefox Sync.
- there is no Manage Account option.
- which means I cannot access my sync key...
After researching & failing to find a workable solution to this dilemma, I decided to set up a new account;
it says '[email protected]' is already in use... it's a vicious circle...
Can anyone help straighten this out so my Fairy Tale ends happily?

I followed your advice- a plausible solution to be sure & one to finally reunite my iTouch & Firefox Sync...in fact, I've followed you advice several times over the last month as I continue to get the following Oops message:
''Oh dear.
Looks like one of the dinosaurs escaped again. We keep them away from the data, so that should be safe.
Please try again later when we've wrestled him back onto the treadmill.''
Does anyone know when the escapee might be returned to his treadmill?

Cannot access my CDROM: Mac book pro 8,1 - Intel Core i5 – 2.23 GHz (early 2011)

Aloha & Happy New Year,
Was running (triple booted with rEFIT) MAC OSX, win7 (64) and Linux (BT5/64) all was well. At some point Win7 crashed, thus I began the reinstall process.
Problem one, reinstalled OSX with install CD without issue. Then during the Q&A segment of fresh install vs.- use a backup copy option; I chose backup copy and somehow I ended up without the correct login pw. So now I cannot login. Nor can I reset using the Master or Firmware pw. I have tried every imaginable pw.
Problem two, during the iphone /iOS 5 upgrade debacle (The "Encrypt iphone backup "PW issue") I lost amongst other vital info, my notes which contained a copy of my firmware and master pw.
The main issue, I cannot access or utilize my CDROM in order to reinstall or access the disk utility. It simply bypasses any CDROM straight to the login screen.
I have attempted:
Restart HOLD-C, PRAM, NVRAM, Option key, restarting with WIN7, restarting with Linux, two different USB drives. Powered off, removed all cables. Opened up back panel, (grounded myself) removed power from logic board and re-connected all parts after several minutes. The question, why is the CD bypassed each and every time? Mind you, this is not the first time I have faced the bypass of the CDROM, yet each time before I have somehow solved the issue. It is a mystery. As in other threads I have posted I do have an iMAC next to my MB Pro. I unseccusfully attempted to use the iMAC for assistance in accessing the mb pro.
I AM AT A LOSS.

Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

*** [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of UNIQUE KEY constraint 'ClientPushMachine_G_AK'. Cannot insert duplicate key in object 'dbo.ClientPushMachine_G'. The duplicate key value is (16777412). : sp_CP_CheckNewAss

*** [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of UNIQUE KEY constraint 'ClientPushMachine_G_AK'. Cannot insert duplicate key in object 'dbo.ClientPushMachine_G'. The duplicate key value is (16777412). : sp_CP_CheckNewAssignedMachine
CCCRT::RunSQLStoredProc - Failed to execute SQL cmd exec [sp_CP_CheckNewAssignedMachine] N'xxx', 1
CCRQueueRequest::GetRequestFromQueue - Failed to execute SQL cmd sp_CP_CheckNewAssignedMachine
I get the above issue and the one below at a client site; the error started with the error below then changed to the one reported above and back to the one below. Everything is working as it should but the issues
started when one of the admins at the data-centre incorrectly applied a gpo which affected a number of service accounts (sccm inclusive) and they expired....hence reporting in sccm got broke as well as this error in the ccm.log file appeared.
Remote client install still works but I believe this error affects new client discovered by sccm, so in other words devices discovered by sccm do not get the client installed automatically....but if all access and permissions are in place...pushing out the
client to the new discovered system works, it just not done automatically, which kinda defeats one the reasons for using sccm.
I have searched the breadth of the tinternet and I can only find two technet reference to the same error - one says to edit the stored procedure on the sql server which I don't think should be done... Like Jason said and I concur....its bad joo joos.
The second suggestion, said you should select all the options in the Client Push Installation properties, I have tried this but hasn't solved the problem.
I am planning to upgrade the site to the R2 CU3 before the end of the year but I would like to resolve this error before the upgrade.
The site is currently sccm 2012 sp1
Any idea?> Resolution? sil vous plait!
Merci

Hi ,
Please back up the database of the SCCM site. Then run the following query against the Site DB and see how it goes.
DELETE FROM System_SMS_Resident_ARR
WHERE ItemKey IN (
SELECT ItemKey FROM vSystem_SMS_Resident_ARR
GROUP BY ItemKey
HAVING COUNT(ItemKey) > 1
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Installer cannot access reistry key

Similar Messages

Maybe you are looking for