Installing OSX after installing new internal harddrive in MacBook

I am installing new 250GB harddrive in my MacBook. After installation, do I have to reinstall OSX from the Leopard disc, or is there a way to do it from my backups on an external drive created with Time Machine?

First you need to prep your new drive:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
To restore from a TM backup see Restoring files from a Time Capsule backup. Note that the procedures are basically the same for restoring from a TM backup on a non-Time Capsule backup drive.

Similar Messages

Installing OSX on brand new HDD on Macbook Pro 13" Mid 2009

I have installed a brand new solid state hard drive in my macbook pro 13" mid 2009.
I replaced the old hard drive because it was failing.
Now that I have the new hard drive installed I am struggling to get OS X installed onto the new hard drive. I have ruled out using a USB enclosure on the old hard drive to do the transfer because it was failing.
I do have the original OSX snow leopard start up disk. I have tried using this to install OSX onto the new HDD but it would not work.
I think it might be because the new HDD is unformatted?
I have also been into disk utility to try to resolve this but this does not work.
I have tried partitioning the new HDD but I get an error message "Partition failed .... POSIX reports: The operation cannot be completed. Cannot allocate memory".
I have also tried the restore function in Disk Utility to restore the disk using my time machine backup disk, but I get the error "Could not erase target - Operation not permitted"
I have also tried to restore the HDD from a time machine backup, but when I try to select a Destination it says the "disk does not have enough space to restore your system"
Any suggestions on how to solve this would be much appreciated

I assume that you have an original Leopard installation disk or a white retail Snow Leopard disk.
Start your MBP with one of these disks holding the C key down.
Commence the installation process until you get a display with the menu bar on top.
Click on UTILITIES.
From the drop down menu, click on Disk Utility.
Select Disk Utility>Erase.
Format the SSD to 'Mac OS Extended (Journaled)'.
Continue the OSX installation.
Ciao.

How to install newest version of OSX on a new hard disk in macbook air

how to install newest version of OSX on a new hard disk in macbook air

Hold down command-R to boot into recovery mode and then install the OS. You need an Internet connection.

My app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

my app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

HI ..
The only way to reinstall OS X on a Mac already running v10.9 is to use OS X Recovery.
Starrtup your Mac while holding down the Command + R keys.
From there you should be able to access the built in utilities to repair the startup disk and reinstall OS X.
Please read > OS X Recovery

How to install iWork after installing the iOS7

How to install iWork after installing the iOS7.

Oh, but it is since you have already erase the volume. What more do you wish to do? If you want to do an online Internet Recovery and your computer is able to do so, then do this:
Install OS X Using Internet Recovery
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

I get an input/output error when i try to restore a functioning backup from my external harddrive to my new internal harddrive through disk utility?

my hardrive Had a smart status warning so i made a backup of it on my external harddrive through disk utility. i checked to make sure that the backup was working and i had no problems with it. i then bought a new internal harddrive and swaped it out but when i was in recovery mode to try to restore my new hardrive i kept getting an error message saying restore error, input/output error

The big dilemma with a new Internal drive is separating Drive operation from 'inside the MacBook' operation. If you had an External Enclosure, you could do all the work (including booting up from the new drive) using the External enclosure.
Then if a know-good drive develops problems only when moved inside the MacBook, it is time to try a replacement cable.

Setting up OSX after installing a new SSD and moving HDD to optical bay

Hey all,
I know there are a tonne of other posts similar to this one in here, but I couldn't find the specific answers I was looking for.
Soon I'm going to remove my optical bay and put my current HDD in it's place, and install a brand new SSD where the original HDD once was. I'm comfortable with the hardware installation but am wary about what to expect on first power up afterwards.
I would like to ideally run OSX Mavericks and all of my apps (everything from Notepad to Premiere Pro) from the SSD, and leave all of my data on the HDD. I have an early 2011 13" Macbook Pro, model number A1278.
- When I first turn the computer on after the hardware switcheroo, what can I expect to see? How do I re-install OSX Mavericks onto the new drive? Am I right in thinking that Mavericks is merely an upgrade rather than a whole new OSX and that I will need to install Lion and then upgrade to Mavericks rather than just reboot immediately to Mavericks?
- How can I then remove Mavericks from the original HDD?
- Exactly which files do I need to move to completely relocate the apps to the new drive? Is it as simple as moving the entire applications folder over, or are there hidden files dotted all over the place that I need to consider also?
Thanks in advance,
Adam

Adam,
if your current HDD is a SATA III (6.0 Gb/s maximum throughput) drive, then you might find that you’ll have problems with it in the Optibay position. If this is the case, you’d probably be better off putting your SATA III drive into an external enclosure, and purchasing a SATA II (3.0 Gb/s maximum) drive to install in the Optibay.
If you have a SATA-to-USB or SATA-to-FireWire adapter, you can connect your SSD externally and format it with Disk Utility. After that, you could use a cloning utility to copy the contents of your internal HDD to your SSD (presuming that the SSD is at least as large as the amount of space currently used on your internal HDD), and then boot from the external SSD using Startup Manager to make sure that everything works well on it; that will save you from having to make sure that all of the scattered hidden files have been migrated. Once you’ve confirmed that your apps run well from the SSD, you can then install the SSD and move the HDD to wherever it’s going. An advantage of keeping Mavericks on your HDD is that you can boot from it if needed, e.g. should your SSD develop a problem.

Installing OSX Lion on new harddrive, macbook?

I bought OSX Lion on App store for my macbook, but want to install a new SSD on my macbook with a fresh install. How would I do this? Is it possible to download and burn OSX lion to cd? Thanks, JOn

Yes it is, see here:
http://eggfreckles.net/text/burning-a-lion-boot-disc/

Can't install OS X on new internal HD

I've got a MBP (15"), and have put a new internal drive in it (160 gig). However, when I attempt to reinstall OS X (the version I have for my MBP disks is 10.4.5)it keeps telling me that OS X can not install onto my hard drive. I had kept the previous OS up to date, installed the firmware patches, etc.
Does anyone know what might be going on here? I've tried repartitioning the drive (HFS+Journaled), erasing it, creating 2 smaller partitions, etc. but nothing seems to be working.

Do this:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Once the formatting has completed quit DU and return to the installer. Proceed with the OS X installation.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

How can I return back to OSx after installing Lion?

I'm disappointed. After installing Lion, everything is slower. The best thing I had last year was my new MacBook Pro, because everything was fast.. (sleep, opening programs, multitasking...etc) Now, everything takes forever. How can I return back to OSx?

Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.

Installing Snow Leopard on New Internal SSD (without External drive)

All,
I have been searching and searching for a sufficient answer for this question, but have come up short thusfar. So any help or direction would be greatly appreciated.
Basically I have an early 2009 MacBook Air (RevB) with a 128 GB HDD (not SSD). It has been painfully slow the past few months, and with the move to SSD for the new Air's - I've decided to swap my older HD for a new 64GB RunCore SSD (using the online guide from iFixit). However, as the MacBook Air inherently has no DVD drive - and the new HD will completely blank and not allow for the DVD Sharing to take place, I'm a bit stuck.
Here's where the complication sets in - I do not have (and would really rather not purchase) an external Superdrive or external DVD drive just for this one process. However, I do have a MacBook Pro that I would like to use to install Snow Leopard onto the new blank internal SSD.
Finally, I would also like to install Snow Leopard cleanly (i.e. not cloning my existing MacBook Air HD first).
Therefore, my BIG question (in three parts is:
1) Can I install Snow Leopard onto the new internal SSD before I install the new SSD itself into the MacBook Air (i.e. the new internal SSD comes with an external enclosure to presumably allow for cloning prior to installation). Therefore, can I just install Snow Leopard from my MBP's Superdrive to the new SSD using the new SSD + Enclosure as an external HD?
2) When complete, and then installed in the MacBook Air, will the new internal SSD boot correctly?
3) Finally what formats should I go for (GUID, Journalled, etc.) - or is that not really applicable in this case?
Hopefully that all makes sense...?
And thanks in advance!
-Eddie

Okay just copied this from a tutorial on how to do it.
*OSX 10.6 method for bootable USB key install*
Insert your retail DVD into drive.
Plug in usb key. I recommend getting at least a 16gig drive so you don’t run into capacity issues.
Open Disk Utitlity. Locatied in Applocations/Utitilties/DiskUtitily.app
Partition the USB drive and select GUID in the options so it will be bootable on a Mac.
Select restore and drag the image of the DVD on the left into the input path.
Drag the USB drive into the destination drive.
Click the restore button.
Sit back and relax cause you will be waiting for about 20-30 mins for the key to be formatted properly.
Hope this helps

How do I install OSX onto a new SSD (in the place of my optical drive) without transferring all data across. However, with the applications, system and library on the SSD to improve the speed, but keep non essential items (the home folder) on the HDD

I have a mid 2009 13 inch unibody 2.53GHz MacBook Pro. I'm finding that it doesn't run as quickly as it used to.
A genius in the Apple store suggested that I replace my optical drive with an SSD, however only use the SSD for OSX, applications, system and library. Keep all documents, pictures, music etc on the current hard drive.
I would be grateful if someone could help me with:
1) installing OSX on the SSD without copying across data from the current hard drive
2) transferring applications, system and library folders across to the SSD so that they still function
3) changing my settings so that OSX reads the home folder from the current hard drive, as well as all the applications' data (documents, music etc...)
However, I would like to run iMovie, with all events etc solely from the SSD to speed up the process of editing movies.
If anyone could help with this, it would be much appreciated.

If you got the data transfer cable with your SSD, the procedure should be pretty simple - and there should be step-by-step instructions in the box. You're simply going to remove the bottom case of your computer (using a Phillips #00 screwdriver), take out the two screws in the bracket holding the hard drive into place (using same screwdriver), remove the drive and (use a Torx 6 screwdriver) remove the four screws that hold the hard drive in place. Then put in the SSD and reassemble the machine.
Then you'll plug up the old hard drive by using the SATA to USB cable and use the option key to boot from the old drive. I don't know what data transfer software Crucial provides, but I would recommend formatting the SSD using Disk Utility from your old drive ("Mac OS Extended (Journaled)" with a single GUID partition) and then use Carbon Copy Cloner to clone your old drive to your new SSD (see this user tip for cloning - https://discussions.apple.com/docs/DOC-4122). You needn't worry about getting an enclosure since you have the data transfer cable and you don't want to use your old hard drive.
There are a number of videos on YouTube that take you step-by-step through this procedure - many specific to Crucial SSDs and their data transfer kit - do a little searching there if you're unsure of how to procede.
Clinton

I can no longer boot up in osx after installing windows 7 with bootcamp

After installing windows 7 with boot camp I am no longer able to access my osx side, I do not receive an option when holding alt when turning on my MacBook

What options do you get? If you don't get any options then you may not be pressing and holding the option key long enough or you are pressing it too early or too late.

How can I install OSX into a new hard drive without a CD?

I just installed a new hard drive and I don't have a installation CD/DVD to install OSX. How can I go about install a fresh copy?

Are you able to beg or borrow access to another Mac that has access to the internet & is new enough to use the App store?
You can sign in to your App store account & download the appropriate installer (Mavericks or whatever you have in your account). Then you can make a USB bootable copy of the installer (there are many other guides around)…
http://osxdaily.com/2011/07/08/make-a-bootable-mac-os-x-10-7-lion-installer-from -a-usb-flash-drive/
If you can access a Mac but don't want to do the huge download you can use the recovery assistant to create a bootable recovery partition on a USB stick.
https://support.apple.com/kb/DL1433
When you boot your Mac it will download the OS for installation.
Does the original HD still work? It may be quicker to get a cheap 2.5inch case & boot from that just to get an OS downloaded & installed. It will mean you are not wasting cash & time on 10.6 that is only needed for one App store download.
I'd consider a trip to an Apple store if you have one local, they may drop an installer or recovery partition onto a memory stick for you.

Unable to re install osx after erasing HD on iMac

Hi
I have a 2007 iMac 4,1 Intel core duo 2ghz that refused to boot after crashing.
After much searching of support articles i have tried all suggestions.
It would not accept the original [tiger] install discs[superdrive spits them out] so i used my macbookpro to erase the hd and then install disc 1 via target mode.
The iMac now gets as far as select destination, in the installer, but the hard drive does not appear [waited more than 1 hour].
I have the leopard upgrade dvd also.
I ran disk utility verify and its says vol 1 iMac appears ok
1 HFS volume checked
volume passed verification
but verify disk permissions says first aid failed- no valid packages
Does anyone have any solutions that will solve this, as i am no expert on these matters and really need step by step help.
Many thanks in advance
P

I am confused!
You said.
Please confirm:
You want to erase the drive on the iMac after booting from the Macbook Pro, with the iMac in TDM. Is that correct?
YES I did that so as to install osx install disk 1.
When you boot in TDM and run DU off the MBP hard drive, does it recognize the iMac hard drive?
YES i erased the iMac HD and installed osx disk 1.
Note that you cannot erase / reformat the drive from which the computer is booted.
BUT u said this previously!
Try this:
Repeat this first part, then reformat the drive on the iMac, using Disk Utility on the installer disk. Select Mac OS extended, GUID partition.
Then run the installer in the usual way.
details are
mount point : /
format: mac os extended [journaled]
owners enabled : yes
folders : 5,563
cap 465
avail 46
used 5.0 gb
files 11,728
write status : read \write
S.M.A.R.T status : verified
verify: vol passed verification
permissions verify ; error no valid packages
installer hangs at destination?
What about this? permissions verify ; error no valid packages

Installing OSX after installing new internal harddrive in MacBook

Similar Messages

Maybe you are looking for