Installing OSX along with OS 9

I just got a computer with OS9 (it was given to me ). I would like to upgrade it to OSX Panther but I was wondering if I would lose all the applications that were already installed on OS9. Is there a way to have both operating systems? How does all of that work? I would like to install OSX by itself, but will do whatever to keep my old applications!
Thanks for any help!

You won't lose the OS 9 applications when you install OS X. However, the "classic" apps will not operate with OS X.
You need to check if your Mac requires a firmware (Boot ROM version) update. Mac OS X: Available firmware updates
http://docs.info.apple.com/article.html?artnum=86117 If an update is required, the update must be installed (using OS 9) BEFORE you install OS X. Before you install OS X, you need to update (free from Apple) OS 9 to 9.2.2.
You can install OS X on the same hard drive with OS 9.
Or you can create separate partitions - one for OS 9 & one for OS X. I have my G4 set up this way.
Here's the *OS 10.3 Panther requirements*
http://docs.info.apple.com/article.html?artnum=106163
Suggest you buy the book by David Pogue - Mac OS X The Missing Manual Panther Edition.
Includes everything you need to know about installing OS X, using OS X & maintaining OS X.
 Cheers, Tom

Similar Messages

Can you install osx lion with thumb drive from 10.6.3

can you install osx lion with thumb drive from 10.6.3

No. You can install Snow Leopard with a flash drive 10.6.3 installer. However, for Lion you must start with 10.6.8 in order to access the App Store to purchase and download Lion.

Need help in installing JBOSS along with Jdk version

Hi,
I am using Linux 64 bit Machine.
I have Jdk1.5.0_18 and jboss-4.2.3.GA installed in my machine.
But the JBOSS Server is failed in booting.
What version of JBOSS Server needed for the 64 bit along with Jdk1.5.0_18
Any help will be needful for me
Thanks and Regards

The name of this forum is "Database - General" not JBOSS, JDK, or "anything goes."
Please delete this post and post your question in the appropriate forum.
Thank you.

How to install ubuntu along with windows 7

I have HP 15-r062TU. In that i am install windows 7 64bit os. Now i would like to install ubuntu 12.04 or 14.04 LTS os along side windows 7.
For first booting from usb/cd-rom it shows along side with windows after hitting continue button it reboots from the begin and starts all stages and shows without alongside with windows option during installation.
Please help me. Thanks in advance.
I made a mistake that i was completely removed ubuntu operating system includeing HP_Tool hard disk partion also from pre installed ubuntu os.

Hi,
Please use the following instructions:
http://www.dedoimedo.com/computers/dual-boot-windows-7-ubuntu.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Function module for creation of Installed base along with product

Hi,
Function module for creation of installed based with product for the business partner.

Try
BAPI_IBASE_CREATE
IB_IBASE_CREATE
IB_IBASE_CREATE_INITIAL
CRM_IBASE_COMP_CREATE
CRM_IBASE_CREATE
IB_COM2_CREATE_IBASE
IB_COM_CREATE_IBASE_INITIAL
Regards,
Kaushal

Install CS3 along with DW8?

Can I install CS3 Design Premium without uninstalling DW 8?
I've tried searching for this info but haven't been able to find it
so far. I'm running on Windows XP Pro if that makes a difference.
I want to start using the other pieces of CS3 but want to
continue using DW8 until I finish my current project.
Thanks.

Sure, you can.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"towanda_j" <[email protected]> wrote in
message
news:g5gf3b$knr$[email protected]..
> Can I install CS3 Design Premium without uninstalling DW
8? I've tried
> searching for this info but haven't been able to find it
so far. I'm
> running on
> Windows XP Pro if that makes a difference.
>
> I want to start using the other pieces of CS3 but want
to continue using
> DW8
> until I finish my current project.
>
> Thanks.
>
>
>

What is Fast1 and why is it installing along with Adobe Flash?

I just updated Adobe Flash and when that was done, I found that File1 Package Manager had also installed and had launched and was in turn attempting to update other software. Pressing "cancel" did nothing, and when I went into the Task Manager (using ctl-alt-del) and clicked on "end process" I got an error message that I did not have authorization to end the process. Eventually it ended on its own, but WTF? It looks like malware: downloading, installing, and running all without my knowledge or consent. A full system scan with Microsoft Security Essentials, but I'm not sure if that would detect malware.
This seems to be something new, i.e. when I Googled it, there was almost nothing out there about it. I did find one forum on which mine was the first question, and several other people responded that they had the same experience.
One of two things would seem to be going on. Either the adobe.com web site has been hacked and malware is riding in on product updates, or the Adobe corporation has agreed to install Fast1 along with its products and just isn't telling its customers. (I was very carteful to watch for boxes to uncheck as I went through the update. There weren't any.)

Question: What is file 1 package manager ?
A: “File1 Package Manager (Ant App service) is a program developed by Helios Technologies. The software adds a background controller service that is set to automatically run. The specfic verbage from the file 1 wesite ( http://www.file1.com/ ) states---
"File1.com Package Manager is a handy tool for managing all your programs within one space. It provides a user with a list of programs already installed and those available for installation. With Package Manager you can easily upgrade, install or uninstall all of our proposed software on the site. File1.com is a freeware guide that provides the best free software which is absolutely safe. It means no additional programs you do not know about, no malware, spyware, or viruses. "
Q: Why is file 1 installing with adobe flash?
A: It shouldn't if you are downloading and installing manually from the adobe.com. If you download adobe from a third party website this could be the reason. If you are on a shared computer, it may have been downloaded to your computer to obtain many of the free software it offers. If this is the case File1 may have auto updated your adobe flash
Extras:
You can uninstall File1 Package Manager from your computer by using the Add/Remove Program feature in the Window's Control Panel.
A.
A.    A. On the Start menu (for Windows 8, right-click the screen's bottom-left corner), click Control Panel, and then, under Programs, do one of the following:
1.    Windows Vista/7/8: Click Uninstall a Program
2.    Windows XP: Click Add or Remove Programs.
B. When you find the program File1 Package Manager, click it, and then do one of the following:
1.Windows Vista/7/8: Click Uninstall.
      2.Windows XP: Click the Remove or Change/Remove tab (tothe right of the program).

Can MDM installed along with CCM 2.0

Hi,
We have SRM Demo server, where currently we installed CCM. Can we install MDM along with CCM or is it mandatory to uninstall CCM before we install MDM. Please advise on this.
Regards
G GL

Hi,
You can play with several & different catalogs in SRM, so you can have CCM in your SRM system and also access to an SRM-MDM catalog.
I hope this helps
Best regards

Renew; installing OSX on a PRO running only on Windows XP

Back to the drawing board with my older post (see title). I re-formatted the HDD on another PRO and installed a fresh version of OSX on the drive. It boots without issues on that PRO hence no HDD issues. After putting this HDD in my PRO same problem occurs, it runs perfect on Windows XP (including all features) but wont boot past the Apple logo after boot up on the installed OSX (same with newly installed OSX on external drive and disc). Can it be a hardware issue? If yes how can i check this when the PRO only runs on XP?

On the optical disk(s) that came with your Mac, there is a program called Apple Hardware Test. It is accessed by booting this optical disk while holding the D key (instructions are on the disk).
bd

Ubuntu along with Windows 7 in Z220 workstation

Hello,
is it possiable to install ubuntu along with windows 7 in HP Z220 CMT Workstation
if it is yes, is all the versions of ubuntu will supported by workstation or is there any specific vertion for this?
can i have the procedure to install ubuntu along with windows 7
please someone help me
Thanks in advance

Hi:
You may also want to post your question on the HP Business Support Forum -- z Workstations section.
http://h30499.www3.hp.com/t5/Workstations-z-series-xw-series/bd-p/bsc-272#.VO3nG3l0y9I

Insyall Enhance Pack 4 along with ERP 6.0?

Hi,
I need to build new ERP 6.0 system with enhancement package 4.
Is it possible to install EHP4 along with ERP 6.0 installation?
Thanks,
Ram

Hi,
Basically there are two steps for the installation:
1. Installation of SAP ERP 6.0 (including SAP EHP 1 for SAP NW 7.0)
2. Installation of selected parts of Enhancement Package 4 for SAP ERP 6.0
So, the first step is to use sapinst to install the ERP 6.0 with NW 7.01 (the BASIS part)
Then the second step is to use the sapehpi to install the EHP4 for ERP 6.0 (the application part)
Read the master guide and installation documents at
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000082027&_SCENARIO=01100035870000000202&

MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue) I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

Hello (hopefully someone can shed some light on my issue)
I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
I restarted the machine and this time a flashing question mark folder!
could not do a thing.
so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
(interestingly since the RAID card had been removed the RAID UTILITY from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
thanks for your help in advanced.

hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar problem some one else had!
working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
and try to restart, hoping all was fine, this was not the case :-(
I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
(nvidia geforce 8800gt 2x dvi).
I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
what was the cost to get this? bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

How do I install OSX onto a new SSD (in the place of my optical drive) without transferring all data across. However, with the applications, system and library on the SSD to improve the speed, but keep non essential items (the home folder) on the HDD

I have a mid 2009 13 inch unibody 2.53GHz MacBook Pro. I'm finding that it doesn't run as quickly as it used to.
A genius in the Apple store suggested that I replace my optical drive with an SSD, however only use the SSD for OSX, applications, system and library. Keep all documents, pictures, music etc on the current hard drive.
I would be grateful if someone could help me with:
1) installing OSX on the SSD without copying across data from the current hard drive
2) transferring applications, system and library folders across to the SSD so that they still function
3) changing my settings so that OSX reads the home folder from the current hard drive, as well as all the applications' data (documents, music etc...)
However, I would like to run iMovie, with all events etc solely from the SSD to speed up the process of editing movies.
If anyone could help with this, it would be much appreciated.

If you got the data transfer cable with your SSD, the procedure should be pretty simple - and there should be step-by-step instructions in the box. You're simply going to remove the bottom case of your computer (using a Phillips #00 screwdriver), take out the two screws in the bracket holding the hard drive into place (using same screwdriver), remove the drive and (use a Torx 6 screwdriver) remove the four screws that hold the hard drive in place. Then put in the SSD and reassemble the machine.
Then you'll plug up the old hard drive by using the SATA to USB cable and use the option key to boot from the old drive. I don't know what data transfer software Crucial provides, but I would recommend formatting the SSD using Disk Utility from your old drive ("Mac OS Extended (Journaled)" with a single GUID partition) and then use Carbon Copy Cloner to clone your old drive to your new SSD (see this user tip for cloning - https://discussions.apple.com/docs/DOC-4122). You needn't worry about getting an enclosure since you have the data transfer cable and you don't want to use your old hard drive.
There are a number of videos on YouTube that take you step-by-step through this procedure - many specific to Crucial SSDs and their data transfer kit - do a little searching there if you're unsure of how to procede.
Clinton

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?

Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li

Help with installing OSX Lion on iMac with broken display

Hi,
Having some trouble installing OSX Lion on my 5 year old iMac which has a broken display.
The display has been dead for a couple of years now and I've been using an external monitor without any problems. Today I decided to upgrade to Lion - I downloaded the installer from the App Store and started the install which rebooted the machine. After reboot I'm presented with a grey 'thatched' background image on the external display and nothing else, no menu bar, installation menu etc.
I presume the internal display is showing the menu I need but I can't see it as that screen is broken. Is there a way to turn on mirroring during the install process so I can use my external display? I've tried various shortcuts held down during startup - OPTION-F14, CMD-F1, CMD-F2 - but none have worked.
If this isn't possible, is there a way to abort the Lion install process and go back to using my Snow Leopard install? Whenever I boot the machine I am taken to the OS X Lion installer and don't know how to get back to my Snow Leopard install. I tried holding down OPTION key on startup to choose the list of available OS installs, but again, the internal display is being used so I can't see what to do.
Thanks in advance for any help.

Genius idea, thank you. Was able to step through the install procedure using voiceover and the screenshots on this page http://www.macstories.net/mac/os-x-lion-installation-guide-boot-discs-and-qa/
Definitely a first for me, installing an OS with voice only

Installing OSX along with OS 9

Similar Messages

Maybe you are looking for