Insufficient quota - unable to write to controlfile

I am getting what is probably a typical error using Ora9.201 on Windows 2000 Server. It seems to happen after reboots - rendering Oracle Unavailable.
From trace file...
ORA-00221: error on write to controlfile
ORA-00206: error in writing (block 3, # blocks 1) of controlfile
ORA-00202: controlfile: 'C:\ORACLE\ORADATA\ORA9201\CONTROL03.CTL'
ORA-27072: skgfdisp: I/O error
. repeats this for each of my other 2 controlfiles
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 1453) Insufficient quota to complete the requested service.
Restarting in the Service Manager clears it up, but I would like to understand what is going on here.
Thanks,
Steve

If all your controlfiles are damaged you have to use the option befored mentioned by me:
CREATE CONTROLFILE
Caution:
Oracle recommends that you perform a full backup of all files in the database before using this statement. For more information, see Oracle9i User-Managed Backup and Recovery Guide.
Purpose
Use the CREATE CONTROLFILE statement to re-create a control file in one of the following cases:
All copies of your existing control files have been lost through media failure.
You want to change the name of the database.
You want to change the maximum number of redo log file groups, redo log file members, archived redo log files, datafiles, or instances that can concurrently have the database mounted and open.
Note:
If it is necessary to use the CREATE CONTROLFILE statement, do not include in the DATAFILE clause any datafiles in temporary or read-only tablespaces. You can add these types of files to the database later.
An alternative to the CREATE CONTROLFILE statement is ALTER DATABASE BACKUP CONTROLFILE TO TRACE, which generates a SQL script in the trace file to re-create the controlfile. If your database contains any read-only or temporary tablespaces, that SQL script will also contain all the necessary SQL statements to add those files back into the database.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_54a.htm#SQLRF01203
Joel Pérez

Similar Messages

ORA-27044: unable to write the header block of file / IBM AIX RISC System/6

We are getting an error like this...
Oracle 11.2.0.2
AIX 5.3
Error:
CREATE CONTROLFILE REUSE DATABASE "CLMST" RESETLOGS NOARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/clmst02/UAT/oradata/control/control01.ctl'
ORA-27044: unable to write the header block of file
IBM AIX RISC System/6000 Error: 89: Invalid file system control data detected
Additional information: 3
Additional information: -1
Additional information: 1

ORA-09817 IBM AIX RISC System/6000 Error: 89
Oracle 11.2.0.2
AIX 5.3
Related Errors:-
Mon Nov 05 18:33:51 2012
ARC3 started with pid=30, OS id=954622
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC2: Becoming the heartbeat ARCH
Errors in file /clmst01/UAT/oracode/app/oracle/diag/rdbms/clmst/clmst/trace/clmst_ora_2514960.trc (incident=17053):
ORA-00600: internal error code, arguments: [kccugg_end], [], [], [], [], [], [], [], [], [], [], []
Errors in file /clmst01/UAT/oracode/app/oracle/diag/rdbms/clmst/clmst/trace/clmst_m000_2105586.trc:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/clmst02/UAT/oradata/redo/redo03A.log'
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
CREATE CONTROLFILE REUSE DATABASE "CLMST" RESETLOGS NOARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/clmst02/UAT/oradata/control/control01.ctl'
ORA-27044: unable to write the header block of file
IBM AIX RISC System/6000 Error: 89: Invalid file system control data detected
Additional information: 3
Additional information: -1
Additional information: 1
Cause:-
Your /clmst02/ mount point might be corrupted.
Check:-
fsck /clmst02
The current volume is: /dev/fslv00
File system is currently mounted.
Primary superblock is valid.
fsck: Performing read-only processing does not produce dependable results.
*** Phase 1 - Initial inode scan
*** Phase 2 - Process remaining directories
*** Phase 3 - Process remaining files
*** Phase 4 - Check inode allocation map
File system inode map is corrupt (NOT FIXED)
fsck: 0507-278 Cannot continue.
File system is currently mounted.
fsck: Performing read-only processing does not produce dependable results.
Fix:-
Either you can change the file location to another mount points or shutdown the database and run the fsck on /clmst02 mount point to fix the corrupted one & start the database.
Fix:-
Recreate the affected Redolog files
alter database add logfile group 3 (
'/clmst02/UAT/oradata/redo/redo03A.log',
'/clmst03/UAT/oradata2/redo/redo03B.log',
'/clmst04/UAT/oradata3/redo/redo03C.log') size 50m reuse;

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

Trying to install/format an INTERNAL hard drive using Disk Utility gives me "Error: -69760: Unable to write to the last block of the device". Is that a hardware problem and what could be done about it?

*** PLEASE NOTE*** - This is a query about an INTERNAL HDD not an external one. Thanks.
My Mac is a late 2009 model and the current hard drive recently failed. So I bought a new one, exactly the same, albeit 750gb instead of 500gb. The HDD is a Seagate Momentus 7200. Before the my current drive failed I made a time machine back up to an external USB HDD. I've inserted the HDD into the bottom of my Mac, plugged in the USB and started my machine pressing the 'Option' ([ALT]) key. I go into Disk Utility to try and format the new HDD by creating a new partition but I keep getting the messages,
"Error: -69760: Unable to write to the last block of the device"
or
"POSIX: could not allocate memory"
This is actaully the third HDD I've tried. The first was another Seagate Momentus 7200 500gb, but this time it was a newer model (model number ended in 423AS instead of 420AS - the new one I am trying ends with 420AS, which is the same as the current HDD). I then tried a Western Digital drive but that one didn't even show up in DU. Forums and tech support are suggesting it's faults with the HDDs but surely not three in a row?
Could this be an issue with another part of my Mac?
Is there anything else I can do to format the HDD, have I missed a crucial step?

Did you ever get a resolution to this issue?
I am having that exact error with a new 512GB SSD from Crucial, in a 15" MBP mid-2010.
I really wonder now if the stupid SATA cable could be bad - causing the initial SSD fail. I am replacing it with the EXACT same drive, and getting that "last block" error when i partition in the GUI or from command-line.
thanks!

Unable to write an image to excel with report generation toolkit

I am unable to write an image to excel with the report generation toolkit. The VI works fine for word, but when I select Excel the speadsheet pens but remains blank.

Ranjeet
I am using Labview 2013 or 8.0, but here is an image of the very simple test VI.
Regards
Steve

Unable to write to external drive after drive sleeps

This topic seems to be all over the place. I want to know if there is a fix.
I have a number of external disk drives. They are connected via USB and firewire. About 30% of the time, if a drive has been put in sleep mode and then later awakened, I am unable to write to it. If I try to dismount the drive I get a -50 error that the drive is in use. But that is not true because nothing but the finder is running. If I look the console log there are lots of the following messages.
Dec 6 15:50:43 squid fseventsd[45]: disk logger: failed to open output file /Volumes/Calvary1TB/.fseventsd/63657332a56b8d30 (Invalid argument). mount point /Volumes/Calvary1TB/.fseventsd
Dec 6 15:50:50 squid UnmountAssistant[1463]:
The drive in question is the CAXM Calvary1TB drive. BTW when I received the Calvary disk drive, I reformatted it OSX journaled with a GUID partition before using it. All my other 8 TB of storage is formatted the same way and I had no problems before Snow Leopard. Anyhow, If I force a dismount, all returns to normal. OR if I disable sleep the drive drives options in the energy saver preferences, the problem disappears. But then none of the drives ever spin down.
Once every 50 or so forced dismounts (it happens a lot), OSX will crash with the kiss of death display.
This problem did not exist in pre Snow Leopard, so obviously changes were made to the file system and not properly tested. Anyone have any idea when this will be fixed.

The drive in question is the CAXM Calvary1TB drive.
Calvary lists this drive series only in its "Windows PC" section at http://www.cavalrystorage.com/pr_index.htm. This could be a problem because different manufacturers use different methods to implement wake-from-sleep (or more generally, energy management features) in the support circuitry of external drives. IOW, there are no universal standards for this, so manufacturers may or may not design their implementations for cross-platform compatibility.
Unfortunately, since Windows PC's dominate the market some manufacturers use energy management methods in some or all of their designs that work reliably only with that platform. For this reason, there is always some risk of unexpected behavior when using external drives not specifically marketed as Mac OS X compatible with a Mac. (This is not a problem with "raw" internal drives directly connected to a Mac's SATA interface because there is no support circuitry involved.)
Since you already have invested in these drives, your best bet is to contact Calvary & see if they can offer a solution. If you are lucky, they may have a firmware updater for the CAXM series that works reliably with Snow Leopard; if not, they may simply tell you not to let the drives sleep, or that they don't support the CAXM series with Macs & you are on your own.

Can't upgrade iPhoto Library - 'unable to write to library "iPhoto Library"'

I apologise in advance if this is a little convoluted.
I have a MacBook Pro purchased a little over a year ago and I'm not sure what version of iPhoto is was running. It had a meltdown when I tried to upgrade to Mountain Lion and was ably serviced and returned to me with all my data heroically saved and stored in a shared folder.
When I got it back I upgraded successfully to Mountain Lion and installed all the iPhoto updates. After a false start, and having to reinstall iPhoto I am now running 9.4.3.
I have shifted my old iPhoto Library out of the shared folder and into the Pictures folder where it sits alongside the pretty much empty iPhoto Library created automatically by the install. When I try to open my old Library it says it needs to be upgraded, which makes sense, but immediately after the upgrade commences I get an error message saying 'Unable to write to library "iPhoto Library" Check that you have permission to write to the library directory'. I am not sure what to do from this point.
I have verified that the photos are all still in the old iPhoto Library Package.
Thank you.
Melanie

Hang on - I had browsed extensively, but it was only after I wrote my question that all the other similar ones popped up on the side bar. I've followed the advice in some of those and it seems to be working. I apologise, but I seem to be unable to delete this discussion.

Unable to write in an external drive

Hi, everybody:
I am unable to write or work with the material I have in an external drive. I can see it, but nothing more. I see I have only permission for 'Read only' ('Solo puede leer', in Spanish), but I can't change it because there is no 'lock' to open there, or an evident way to do it. And I don't want to touch things in the System Preferences without knowing.
What can I do?
Thank you in advance for your help,
Remedios.

Thank you, Barney-15E. I can't reformat the drive, because I have there a lot of valuable stuff. Stuff I need to work with.
Hey... I'm a little disappointed with this. How is it that this super computer (the iMac is really wonderful, I agree) can't work with a simple hard drive I can use everywhere else..?
Well, anyway, sorry for disturbing you with my problems. Which one, Paragon, Tuxera, you recommend?
Thanks again,
Remedios.

Please Help! Unable to write error whilst trying to synch my ipod to Ext HD

Hi there,
I hope someone out there can help me as I have searched high and low for the answer to my problem without success.
I recently copied my music library to an external hard drive (seagate) connected to my pc via usb. I am able to play music fine from the external library. However when I plug in my ipod to copy the music over, Itunes crashes with an unable to write/network connection error.
As I have >60GB of music and a 20GB ipod, I have selected the option to auto update from playlists which is < 15GB of music. This doesn't seem to be the issue though because attempting to manually update the ipod by drag and drop gives me the same error.
Generally, one song will copy over before the error is displayed or itunes crashes. If I unplug the ipod then itunes recovers ok.
I have upgraded my ipod and itunes to the latest software versions - a number of times:( I am getting the same problem on my HP Compaq desktop as I do on my Dell Inspiron laptop at home.
There seems to be a conflict somewhere but I really need help to resolve it.
Hope someone can help!
Thx,
Nikki.

Could be your security software preventing the devices from being recognized in iTunes. Try disabling a/v software and turn off the Firewall.
Disable antivirus software
Turn Windows Firewall on or off

[Solved] CUPS: Unable to write print data: Input/output error

I'm filling this for the benefit of those poor googlers that can reach here.
Symptoms: After trying to print a "complex" image the printer made too much breaks, and failed.
The problem is, it then didn't came up. I mean, I restarted the printer, cupsd, the whole system, and nothing.
I was unable to print again, it showed "Unable to write print data: Input/output error" and refused to print anything.
I then saw that in /etc/cups I had printers.conf and printers.conf.O files, which differed (other than in StateTime), that printers.conf.O had
State Idle
but printers.conf had:
State Stopped
StateMessage Unable to write print data: Input/output error
Reason paused
Probably due to the ErrorPolicy being stop-printer.
So seeing I followed the following steps:
Stop cups
Replace printers.conf with printers.conf.O (I could also had manually edited it)
Start cups
It then went working flawlessly.
There was probably an option in the web interface combobox for doing that. The problem is that I didn't realise it was stopped, so didn't know how to make it work. Moreover, some posts in the web recommended reinstalling the printer (which would skip the problem by creating a new printer).

I think that I had this same problem, and fixed it by reinstalling the printer. Thank you for your post.

Administrators unable to write to a text file created by another Administrator on Windows Server 2008.

Why are Administrators unable to write to a text file created by another Administrator on Windows Server 2008?
--- The Administrators already have full control so how do I fix this? ---
Example: On a Windows Server 2008 (SP1): user A (who belongs to the Administrators group) logs in and creates a directory C:\foo and creates a file readme.txt in the foo directory. User B (also a member of the Administrators group) logs in and opens C:\foo\readme.txt in notepad. User B types something and tries to save the file. User B cannot save the file…an option to save as some other file name is presented. The security permissions of C:\foo\readme.txt show that Administrators have full control.
Work around 1: Explicitly add user B to have full control over the foo directory. The problem is that all the all other Administrators still need to be added (current and future).
Work around 2: Change the Users security permission to be full control on the foo directory. (this seems dangerous!)
It is interesting to not that this same procedure is not a problem in Windows Vista. (Any insight about the difference?)
Sincerely,
Ian

so there is no way to change this without literally shutting down the UAC?
I have files that I need to modify all the time, and it is very annoying to have to save as to my desktop modify and then copy and paste the file again.
I would also rather not give myself permissions to the entire C:\ Drive even specified Folders or documents, etc......
You can change these settings without bringing down the UAC

1.    Click Start, type gpedit.msc and press Enter.
2.    Expand Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options.

3.    Double-click “User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode” on the right pane.
a.    Choose “Elevate without prompting” and click OK.
b.    Double-Click “User Account Control: Admin Approval Mode for the Built-in Administrator account”, Click Enable, Apply and then OK
c.     Double-Click “User Account Control: Run all users, including administrators, as standard users”,Click Enable, Apply and then OK
Then reboot the Server. You should now have the ability to modify any document, etc....

Unable to write to library iPhoto library Check that you have permission to write to the library directory

I think my iPhoto memory is full. I cannot get in to delete photos. When I open it I get the Unable to write to library iPhoto libraryCheck that you have permission to write to the library directory" and i can't do anything else. I tried alt/cmd first aid and it didn't work.
I want to get in and move pics over to a USB stick drive but cannot get past the Unable to write to library..message.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Lync Hybrid : Unable to write to active directory due to lack of permission

Hello everyone,
I need a little help to troubleshoot a problem I have when moving a user to Lync Online.
My client has a Dirsync and Adfs working perfectly with o365.
My problem is that when I try to move a user to Lync Online I have this error :
Move-CsUser -Identity "Username" -Target sipfed.online.lync.com -credential $cred -hostedmigrationOverrideUrl "https://admin0e.online.lync.com/hostedmigration/hostedmigrationservice.svc"
"Move-CsUser : Unable to write to Active Directory due to lack of permissions"
Like the error said, it's a lack of permission but what kind of permission do I need to make this work ? I've tried to googleit/technetit but no helpful topic found...
Thanks in advance for your help and answers.
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you

Hi,
Did you solve the issue by adding the account to RTCUniversalUserAdmins group?
To move an on-premises user to your Lync Online tenant, run the following cmdlets in the Lync Server Management Shell, using the administrator credentials for your Microsoft Office 365 tenant. Replace "[email protected]" with the information for the user
that you want to move.
You can try to move the user from Lync Server on premises to Lync online with the help of the link below “Move users to Lync Online”:
http://technet.microsoft.com/en-us/library/jj204969.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Photoshop CS6 mac OS X 10.9.5 - cannot update 13.0.6 - error "Update failed - unable to write at location." Tried manual update also failed. Tried to change permissions also failed.

Photoshop CS6 mac OS X 10.9.5 - cannot update 13.0.6 - error "Update failed - unable to write at location." Tried manual update also failed. Tried to change permissions also failed.
Follow write permission on thread below - same error message
Re: CS6 updates and Mac write permissions
Need Adobe help to solve this. My own searches in Forums and Google all have failed.

It is not an Adobe problem. You have a OS permissions problem. You can try to correct this by using Disk Utility to Repair Permissions. It is in the First Aid area of Disk Utility.

File manager unable to write data on USB/mem card

After updated to Android 4.4, I am unable to write data on USB pendrive or on memory card( only inbuilt app - File commander can write data on memory card but not on USB pen drive).
With file commander, I can read SD card and Micro USB pen drive( which means I can copy data from SD card and Micro USB pen drive to phone memory).
But with File commander, I can write data on SD card( which means I can create folders and copy data to SD card) but not on Micro USB Pen drive.
If any body has solution to that write restriction on micro USB pen drive, please tell ????????
Upto Android 4.3 I can write on SD card and micro USB pen drive with any file manager app.
But with 4.4, I can write only on SD card with only In build file commander app, but not on micro USB pen drive.
Solved!
Go to Solution.

http://talk.sonymobile.com/t5/Xperia-Z-Ultra/What-changed-in-Android-4-4-KitKat-with-SD-cards/m-p/63...
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Insufficient quota - unable to write to controlfile

Similar Messages

Maybe you are looking for