Problen with dual core and sound blaster audigy 2

HI.
Installing drivers for windows XP 32 or windows 64 in both cases when I play an MP3 file or playing any games when it starts i heard a terrible noise and after a few seconds sounds normal. The problem is basically at starting mp3 songs or any program even Excel. When I am listening a song and start a program like word the noise comes out.
When I was using this card with a pentium 4 2.6 GHz with an intel mother board 875PBZ never had such a problem and windows XP 32 bits.
I would appreciate any help on this matter. Actually I am using Windows x64 and i've downloaded your last version driver and still got the problem.
In my opinion should be some synchro problem in your driver with processor intel D830 clock.
please help me i dont know what to do.
my pc:
Pentium d 830 with d945gnt mothercard. 52mb ram and nvidia 6200 video card.

There was a recent thread posted regrding turning off of the cores during certain music ap
ps.
I'll try and find time to search for it later, and edit this thread with details.

Similar Messages

Vista and Sound Blaster Audigy

Okay I am getting desperate. I have been searching all over for this odd occurence but I havent found anything. I am running a dual core amd processor with Vista 64-bit, 4 GB RAM, and a Sound Blaster Audigy. I purchased this card off of ebay, so I dont exactly know the model (it is the one with a firewire ( ) port on the actual card, and a tan/white i/o box that goes in my cd dri've bay; the box just plainly says Soundblaster Audigy). Anyway, the card had been working great with the drivers at first, and I then had a kernal file fail on me. Well, after recovering successfully with the Windows disc, I came back to find out my drivers had messed up. I tried many combinations of uninstalls/reinstalls, different packages, etc and nothing seems to work. However, the odd part is that sound works within the windows environment (system sounds/clicks/etc), and also through the line in on the breakout box, AND in FLStudio/Reason/Windows Media Player. However, I am not able to get sound through flash movies, Winamp, PC Games, and media things of the sort. I was wondering if anyone else has had this odd occurence, and knew how to fix it. Thank you.
PS
The error I get on Winamp is Bad Directsound driver. Please install proper drivers or select another device in configuration. (I have also messed around with the Winamp output with no luck).

http://forums.creative.com/showthread.php?=3033
Try here.
the above driver pack from Daniel Kawakami is top notch and works very well. Good bass response and I NEVER had a problem when using these in XP, Vista, Vista sp and later Vista 64 Sp and 2.
cheers,
jmacguire

Major Issues with Windows XP and Sound Blaster Audig

As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM

Thanks for the helpful reply Dan
I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card....

Win 7 and Sound Blaster Audigy

I am not able to install my sound blaster sound card in Win 7. I have searched all over for drivers. Please assist.

@tonynjue,
Hi,
There is one great guy on Sound Blaster forum daniel_k.
Try his moded drivers for Audigy to Win7. Link to them You will find here.
If You will have any problems just write to him question in this thread.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Problems with Windows x64 and Sound blaster l

Hey, I have this issue with my sound blaster li've. I've just recently installed Windows x64 and now I'm having issues with my sound. It creates this weird echo sound with a small static sound everytime a game. Prior to loading any applications, the sound is just fine. I had this issue when I had Windows XP but I installed the Li've applications and was able stop that. But I can't install that application for Windows x64. Is there any solution to this? Thanks in advance.

kennydo you have aim or msn or anything where we can talk, because i have relati'vely same stuff as you. Thanks very much

Choppy sound with Leadtek DV2000 and Sound Blaster X-FI SB

hy, i have a Sound Blaster X-Fi SB460, and i have trobule with sound on my tv tuner.....with another sound card, the sound is OK, but with this card the sound is verry strange, and i more loud and choppy and distorsioned....please help me.....
sorry for my bad english.....

So with your 65 whopping posts, what exactly do you think you are contributing to this forum? The user has a Sound Blaster-branded sound card, so in my opinion, he is in the "correct" section.
Originally Posted by Octopuss
You win imbecile award of the month for ignoring forum sections.

SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PM

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Error with Sound Blaster Audigy 2 installation...driv

Hi
I am really stuck with this issue and was wondering if someone out there could help. I have an Audigy 2, and have had it working for a long period of time. I had to re install Windows not so long ago and since then I have found a number of errors with my sound.
Firstly there are a lot of pops and clicks when either gaming or playing audio files. Admittedly the pops and clicks happen a lot more when gaming (multiple sounds playing at once ?).
Therefore I decided to come onto creatives site and download the new drivers for my sound card. I was still running the original drivers from the CD supplied, so felt it was about time.
I downloaded the file SBA2_PCWDRV_LB__84_55-R, which is the correct update for my card and tried to install it.
It comes up with a message:
Setup could not detect and Sound Blaster Audigy 2 on you system.
Please ensure that your sound blaster hardware is properly installed before running this setup program.
setup will not exit
After that message i was a little confused, because as far as I was concerned everything was working ok, sound was coming out and was coming out correctly from my 5. surround system.
So i double clicked on the Creative Volume Control to check everything was on.
I'm not sure if this is an error but a long the top where you select the output device mine says:
SB Audigy [A000]
I'm not 00% sure but I don't think it said that before, I think it said something else, but I could be wrong.
I decided to uninstall my sound card and re-install. Everything installed absolutely fine from the CD, recognised the card and no complaints.
So I tried to re-install the driver update, and same message. (And the output device is still SB Audigy [A000].
Again I uninstalled and tried the Beta patch on the off chance that that would work, still nothing, it does not recognise the card in my computer.
I definately have an Audigy 2 and it has worked properly allowing me to update it before.
Sorry to have such a long message, but I am really confused about all of this and would really like to get everything working properly.
Any advice and help would be appreciated.
Thanks

fedepolito,
I assume that you are running WinXP with Service Pack 3. Did you do a clean sweep of all the Creative Software and reinstall from the A2ZS CD? Do you get sound then?
Me disculpo que no entend?a que todo que usted dijo en su poste. Asumo que usted est? funcionando Windows XP con el Service Pack 3. ?Usted hizo un retiro del barrido limpio de todo el Creative software? (Busque los foros para el "clean sweep." ) ?Despu?s de eso, cuando usted reinstala del CD de Audigy 2 ZS, usted consigue el sonido?
Message Edited by Katman on 03-29-2009 2:59 [email protected]

Vista drivers problems Sound Blaster Audigy 2 ZS Noteb

First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
This notebook has a Texas Instruments PCMCIA controller.
Under "Device Manager" the PCMCIA controller is described as "Texas
Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
webpage the driver that seems to be related to it is "Texas
Instruments PCI74 Integrated FlashMedia Controller Driver".
It is kind of all in one solution from Texas Instruments (PCMCIA
controller, Memory Card reader, and Firewire controller).
Please, may someone help me to answer the questions bellow
1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
I appreciate any help you can give me,
thanks in advance,
Rogerr ZS.

The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

Sound Blaster Audigy with 5.1 Speakers prob

I have 5. speakers with a sound blaster audigy sound card. I've installed all the drivers and additional programs but it looks like my 2 rear speakers are not working. I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't. In the surround mixer i tested the 5. and here are the results:
- Front Left (Sound: OK, Speaker: OK)
- Center (Sound: NO SOUND)
- Front Right (Sound: OK, Speaker: OK)
- Rear Left (Sound: OK, Speaker: NO - The sound comes from the center speaker)
- Rear Right (Sound NO - It sounds very strange... bearly you can understand the words, Speaker: NO - The sound comes from the center speaker)
The wired are set correctly i checked it and I dont know what it might be wrong. Drivers are ok and everything are installed. Help please.

"I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't."
Does this not indicate two of the speakers are not physically working? Or have a mis-interpreted?

"Sound Blaster Audigy Fx" and stereo mix availability

If I buy/install the "Sound Blaster Audigy Fx" will it add the stereo mix option to my sound properties, also
does this card work on windows 8?
http://www.bestbuy.com/site/creative...&skuId=3287009

Re: Sound Blaster Xtreme Audio missing Stereo MixK I think I'm having a similar problem with my Windows 7 Professional system.
I'm am getting sound out of my card.
When I right click on the "speaker" icon in the task bar I see the following list of 5 options
Volume Mixer
Playback Devices
Recording Devices
Sounds
Volume Control Options
However when I click on "playback devices", "Recording Devices" and "sounds" nothing comes up.
What I did do is completely uninstall all traces of any installed Creative software and in the device manager did an uninstall for the SB Xtreme Audio Card.
My recording device is the integrated microphone in the Logitech Quickcam/IM that I have installed. If I go to accessories and click on "sound recorder" it doesn't start up either.
The other issue that I see is that when I go into Control Panel and click on Sounds, nothing happens.
Something is definitely going on but I can't seem to track down the cause.

Is Creative Sound Blaster Audigy 2 NX USB sound card compatible with Dell deskt

Im considering buying the Creative Sound Blaster Audigy 2 NX USB sound card to use with a Dell desktop XPS 40, but recently read a forum message on another page that there was a issue with installing on a Dell Tower but no problems with installing on a laptop
any help is appreciated if there are any compatibility issues with using this sound card on a Dell desktop, Thanks
the main reason I would like to upgrade to this card is so my pc doesnt use the integrated audio which Id like better quality performance with a sound card and also dont want to install a internal card on the system

joaolfb,
Audigy 2 NX will need to be connected with the power adaptor inorder to run. USB will not be enough to sustain the power consumption of the sound card.
Jason

Sound Blaster Audigy 2 ZS and Logitech 5.1 Surround So

Hello everyone, this is my first post on these forums, so I thought I'd just start out by saying hello.
I also have a bit of a problem. For the past several months I've had a Sound Blaster Audigy 2 ZS and a set of Logitech X-530 5. Surround Sound speakers hooked up to my computer. For a these past few months, only two of my speakers have been functionable.
I know they're not broken, because I can plug in separate cables into a certain plug and either my two front speakers will work, my two rear speakers will work, or my center speaker will work. And yes I do have the most recent drivers for my card. :P
If anyone would be able to help me with this problem, I would really appreciate it. Thanks!
By the way, here's a picture of the X-530 Speakers I'm using, just in case anybody needs to see them for reference:
http://img53.imageshack.us/img53/2758/b0002wpscg0ss500sclzzzsr.jpgMessage Edited by Triko on 02-26-200706:20 PM

Turn on CMSS if you have not done so.
Jason

Sound Blaster Audigy 2 ZS Platinum with Vista 64

0Sound Blaster Audigy 2 ZS Platinum with Vista 64Y Hi
I'm considering buying a Sound Blaster Audigy 2 ZS Platinum (with front panel) off ebay, but first I'd like to know if certain features will be compatible with my system. I'm running Vista Home Basic 64bit (hardware is an Asus P5Q-E, Q6600, 2GB of RAM, ATI Radeon HD4850, etc). I'll be using this card for my PC's 5. surround sound system (using the stereo outputs), and more importantly, recording some music. I want to achieve this by using the optical S/PDIF port, as my bass guitar effects board has an S/PDIF output and I've got an S/PDIF cable. I'd also like to use the Line In and Mic inputs. The driver before the latest one for this card said that there was no S/PDIF passthrough for Vista. Has the latest driver got everything I need fixed, so I can just plug it in, install the drivers and then be happily recording through these three inputs?
Thanks for the help?
Message Edited by SuperMaximo on 05-22-2009 2:4 [email protected]

I am brand new to this message system but I am so desperate for help I thought I would try it. After reading lots of comments I find that my problem may be more the rule than the exception. I have an Audigy @ Platinum card and all I ever get from it is crackling and popping. I have been around and around with Creative support but nothing they tell me results in a fix. I am so disgusted at this point that I am ready to just trash the whole thing. I have gone through the BIOS and checked so many settings its a shame. Still crackling and popping. I NEED SPECIFIC ANSWERS FROM SOMEBODY...not just the generic flip the wingle wangle to port xyz and move this to that. here has got to be an answer to this maddening problem. The other thing is that now I can't get my MIDI keyboard to play back. I must have turned something off in the set up process but now I have no idea what to do.
If anyone has any solid answers for me PLEASE come forward with them before I kill someone!

Problen with dual core and sound blaster audigy 2

Similar Messages

Maybe you are looking for