Integrate Iplanet and Oracale Retail Central Office

Hi All,
I need to centralize an employee for that I need to integrate ORCO with Iplanet please let me know how to integrate.
Thanks and Regards,
Sindhuri.M

Moderator Action:
This post has been moved from the Oracle Linux forum, to the Oracle Retail forum.
You don't have a Linux question. You have a question specific to the usage of your application that just happens to be running on Linux.
Please note that this Oracle Retail forum has just recently (April 2013) been moved from ACTIVE status to an ARCHIVED status. That suggests that forum assistance for this product is being retired.
Get a support contract and use the traditional support path to Oracle's Technical Support instead of hoping for free forum tips.

Similar Messages

  • Hardware Requirement for Oracle Retail central office

    Hi,
    We are going with Oracle retail with following modules
    1) Oracle retail central office (ORCO)
    2)back office (ORBO)
    3) pos (POINT OF SERVICE)
    4) Sim (store inventory management)
    Before i discuss with implementation team for hardware , i need advice on best hardware configuration for Orco (Oracle retail central office) and Sim
    following prerequisite will be installed on ORCO prod server
    a)11gR2
    b) weblogic server 10.3.5
    c)jdk1.6
    d)ORCO application
    following prerequisite will be installed on SIM prod server
    a)11gR2
    b) weblogic server 10.3.5
    c)jdk1.6
    d)SIM application
    Note : Operating system for both servers Oracle Linux 5.3 above/ Redhat linux 5.3 above
    application users may be 200+
    Among both sun servers and HP which one is best and how should be the structure for both ORCO and SIM.

    Moderator Action:
    This post has been moved from the Oracle Linux forum, to the Oracle Retail forum.
    You don't have a Linux question. You have a question specific to the usage of your application that just happens to be running on Linux.
    Please note that this Oracle Retail forum has just recently (April 2013) been moved from ACTIVE status to an ARCHIVED status. That suggests that forum assistance for this product is being retired.
    Get a support contract and use the traditional support path to Oracle's Technical Support instead of hoping for free forum tips.

  • Customization of Tabs in Central Office

    Hi,
    I am a first time poster on the forum. I have a question about modifying tabs in Central Office. If I want to add a tab or remove a tab in Central Office is there documentation available that can assist me with that process or some helpful knowledge about how to do it? What file contains the tabs?
    Thanks in advance,
    ssowens

    Presumably this refers to Oracle Retail Central Office ? I am not personally familiar with the product, I don't think its part of Fusion Applications that this forum is dedicated to and as such the technologies used may be different. I will ask colleagues to comment or to point to the correct forum ..
    Jani Rautiainen
    Fusion Applications Developer Relations
    https://blogs.oracle.com/fadevrel/

  • Build failed during Oracle Central office and back office configuration

    Hi,
    We are trying to install Oracle Retail POS. While configuring Central Office Ver 12.01 and back office 12.01, it is giving following Build error. Please advise.
    BUILD FAILED
    D:\POS-INTL\ORCO-12.01\build.xml:499: The following error occurred while executing this line:
    D:\POS-INTL\ORCO-12.01\build.xml:553: The following error occurred while executing this line:
    D:\POS-INTL\ORCO-12.01\build.xml:1480: org.xml.sax.SAXParseException: <Line 1, Column 16>: XML-20201: (Fatal Error) Expected name instead of /.
    Thanks,
    Meena

    You might want to post your question in following forum:
    Retail

  • How to deploy and debug Central Office 13.0.1 Application in Oracle AS

    Hi,
    Can anybody please explain me how to deploy and debug Central Office 13.0.1 / 13.1.1 Application in Oracle Application Server via Ecllipse IDE.
    Please explain this:
    1. Run the Oracle Application Server in debug mode from Ecllipse IDE.
    2. Deploy the Central Office 13.0.1 into Application Server from Ecllipse IDE and able to debug the code.
    3. Restart the Oracle Application Server in debug mode from Ecllipse IDE.
    Thanks
    SRR

    I got the solution

  • Trying to get service. Building that looks to be a central office just down the street.

    I have been trying to find who services my area for landline internet. Every time I try to type in my address into the website the data base has no idea where my address is but this is the same issue with all the other isp databases so I think the address on file in the county/city is different then the one saved on the isp databases. Either way there is a Verizon building a small concrete building with power/ and phone line and maybe other things I don't know. Right down the street from my house and there is no cell tower within 3 miles of it. By any change could I get service from this central office. I tried to call the tech support for setup but they seem to be working off the same data base that I have access too and they have no idea where I am as it says my address is on the other side of town. If there is anything you can do to help please let me know. O and also I was supposed to get a call from the engineering department but that was like 3 weeks ago.
    Thank you for your time to anyone who can provide relevant information.
    Roane TX

    Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board. you will find a link to the private board where you and the agent may exchange information.
    To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

  • Trying to get DSL internet. Verizon central office just down the Road less then 1 mile away.

    I am trying to get service to my home and its a bit frustrating when the county physical address does not match with any other maps to try and get service. (its not just you). My property has 2 addresses associated with it
    {edited for privacy}
    and {edited for privacy}
    There is a central office just down the Road with your logo on it (less then 1 mile when traveling on a Road with power/phone lines)
    My neighbors address is {edited for privacy} if that is easier to find
    Our property is on the intersection for {edited for privacy}
    The Central office is RONETXXA
    when i try to play around with the address trying to find one that is (somewhat close to my address to use as a reference point)
    What seems to be the case is so far i have found that i can get Phone service and direct TV through Verizon.
    Is this due to the distance the system thinks i am from the Central office or is it just that you do not provide Internet other then wireless even though there is a Central office and phone lines already set up in the area and to my 2 houses.
    Also last year we got all the way too getting a phone rep who told us that we would be getting a call from engineering to look into our problem...... that never happened.
    I would be most appreciative if you could please look into this.
    If there is any more information you need to better understand my situation please do let me know and i will do what i can to provide it.

    after the holidays i will again call customer support and hopefully i find them more equipped then the check for service plug in i also have access too and no way of dealing with difficult questions.
    Is there perhaps a more equipped customer support number that i can call to save me time/effort because my issue is not just a simple plug and check issue.
    As it seems again its
    A. the system is not showing my adress distance correctly
    B. the central office is not providing dsl internet even though the lines are already set up. (that kinda seems odd to me)

  • How to integrate Microsoft and SAP using Web Services?

    Hi All
    How to integrate Microsoft and SAP using Web Services? If any one has document please send it to me. My id is [email protected]... Please
    Help me
    Best Regards
    Ravi Shankar

    Hi Ravi,
    This is for Customizing Email and Other Web Services.
    Create addresses
    The address maintenance of R/3 users is carried out either via the R/3 User Maintenance (Transaction SU01) or the Private office settings (Transaction SO12):
    Address --> Other communication...
    Selection of the required communication service.
    Enter address.
    Copy or save.
    b) Configuration of SAPconnect (Transaction SCOT)
    Set communication method
    4.0 + 4.5: Goto --> Customizing --> Communication methods
    as of 4.6: Settings --> Communication methods
    Set the method of the required communication service to the value 'SAPCONNECT' and save the setting.
    Customized the same for Internet mailing.
    C) If you want to Transfer Table Structure Values from SAP R/3 to Web Services then
           1. Create BAPI and Transfer whichever things you want.(Note: The Structure
               of BAPI should be similar to Web Structure (Datatypes).
           2. Create a BDC and Schedule it in the Background.
    Hope it helps you, Awaiting for the Reward Points.
    Thanks
    Subrato Chowdhury

  • VERIZON CHANGED HIGH SPEED DSL AT CENTRAL OFFICE AFTER I HAD 7.840 MBPS FOR MORE THAN 10 MONTHS!!!

    ALL OF THE SUDDEN VERIZON DECIDES IN LATE APRIL THAT I SHOULD HAVE 7.1 MBPS INSTEAD OF THE 7.840 MBPS I HAVE BEEN HAVING FOR MORE THAN 10 MONTHS. AS A MATTER OF FACT, AFTER A LOT OF DISCONNECTIONS SUFFERED IN MARCH/APRIL 2012 BECAUSE VERIZON WAS DOING SOMETHING IN THEIR CENTRAL OFFICE WITHOUT TELLING TO THEIR CUSTOMERS, AND HAVING TO REPLACE ALL OF THE DSL FILTERS, AND TWO MODEMS... I GOT THE D-LINK WORKING AT 7.840 MBPS. AS A MATTER OF FACT, VERIZON TECHNICIAN CAME TO MY HOME AND WE DID INSTALL THE NEW MODEM AT THAT VERY SPEED, WHICH WAS AGREED MORE THAN 1 YEAR AGO AFTER DOING A LOT OF TESTING TO ENSURE THE STABILITY IN THE CONNECTION. ALL OF THE SUDDEN, AFTER THE 20-DAY HONEYMOON WITH MY NEW MODEM, I NOTICED THAT MY SPEED WAS NOT THE SAME, AND FOUND OUT THAT THE IP WAS CHANGED AND THE SPEED SETTING DROPPED TO 7.1 MBPS. NOW VERIZON CLAIMS THAT MY CONTRACT WAS FOR A MAXIMUM OF 7.1 MBPS WHICH IS NOT TRUE BECAUSE I WAS IN THE 7-15 MBPS RANGE!!! AS A MATTER OF FACT I COULD GO EVEN OVER 8 MBPS BUT BECAUSE OF MY LOCATION, RELATIVELY FAR AWAY FROM THE CENTRAL OFFICE AND AFTER A LOT OF TESTING, 7.840 MBPS WAS THE MOST CONVENIENT SPEED. VERIZON CHANGES THEIR POLICIES NOT NOTIFYING THE CUSTOMERS, THEY DO WORK INTERRUPTING THE SERVICE WITHOUT NOTIFYING. I AM GOING TO WAIT AND SEE WHAT THEY DO IN THIS CASE. IF THIS IS NOT SOLVED PROPERLY... GOOD BYE VERIZON, AND HELLO TIME WARNER CABLE!!! SO, VERIZON BE PREPARED TO LOSE ANOTHER LOYAL CUSTOMER FOR MORE THAN 9 YEARS!!! THAT IS THE PROBLEM WITH VERIZON, THEY ARE SO DEDICATED TO GET NEW CUSTOMERS THAT FORGET ABOUT THEIR OLD LOYAL ONES... UNFORTUNATELY, THERE ARE CONSEQUENCES... AND THOSE ARE THAT YOU WILL LOSE THE OLD ONES SOON BECAUSE YOUR LACK OF CARE ABOUT THEM!!! ONCE YOU ARE HOOKED WITH VERIZON, THEY THINK THEY GOTCHA FOREVER... LET'S WAIT AND SEE...

    Believe or not... That 20% does make a difference... In one of my games, I used to have 5.3 secs of response time, now it does not lower from 7.8. By the way, even my PC worked faster  when I had that little higher speed... I know the changes were done without my knowledge because for a period of 2 weeks I got lot of unstability in my connection that I never got for years before... After 20 days with the first IP assigned to the new modem, the speed dropped like Verizon was running a program to levelize such an speed.
    At the end, what really bothers me, is that the 7.840 Mbps was a speed agreed with Verizon, their technicians, their supervisors at the CO, and it was fully documented, and all of the sudden because an "internal change in their policies" that agreement was broken... I am currently making arrangements to have FIOS installed at home, subject to an scouting visit from Verizon to evaluate the feasibility of its installation according to my internal wiring limitations. I have to give them a try... No doubt that it would me cheaper and much faster than the high speed enhanced internet connection that I currently have. Let's wait and see...
    Thank you for your interest in my case and observations made too.

  • Parameter distribution from Central office to registers

    Hi,
    is there any documentation for enabling the parameter distribution from central office to Register POS application?
    any pointers for enabling the configuration changes for MQ in central office and back office WAS will be helpful.
    Also how the parameter data flows from central office to register.
    Thanks in advance

    Yes you are true its only workstation.xml which gets updated.
    So only worstation takes precedence over application.
    Regards
    Saurabh Kukreja
    [email protected]

  • I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

    I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

    Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
    If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
    Office for Mac forums
    PowerPoint is not an Apple product and it seems a lot of people around here avoid Office.

  • The problem about  integrate  Portal and R/3

    Hi everyone :
       We want to achieve that our vendor can query R/3 report via our Portal. I had done SSO configuration.
       But we had about 500 vendors, it is impossible that we create 500 R/3 users for our vendors,  because the cost is too much .
       And there is another problem, vendor who had the authorization to query report can query the other vendor's data at same time. But we expect that certain vendor can query his data only.
       I think this is a general problem when integrate Portal and R/3, BW .
       Is there somebody had solved this problem or give any advice?
       Any discuss is welcome.
    Best Regards,
    Jianguo Chen

    Hi,
    I would say: get in contact with your SAP account manager anc check which options SAP can offer you...
    Normally every user using a R/3 system has to have a valid user license in that system. Expecially when you want to access control to data on user (vendor) level you nedd to identifiy the user clearly and uniquely which by standard means you need a user for every vendor.
    Hth,
    Michael

  • The problem about  integrate  Portal and R/3 : vendor query report problem

    Hi everyone :
       We want to achieve that our vendor can query R/3 report via our Portal. I had done SSO configuration.
       But we had about 500 vendors, it is impossible that we create 500 R/3 users for our vendors,  because the cost is too much .
       And there is another problem, vendor who had the authorization to query report can query the other vendor's data at same time. But we expect that certain vendor can query his data only.
       I think this is a general problem when integrate Portal and R/3, BW .
       Is there somebody had solved this problem or give any advice?
       Any discuss is welcome.
    Best Regards,
    Jianguo Chen

    Hi,
    I would say: get in contact with your SAP account manager anc check which options SAP can offer you...
    Normally every user using a R/3 system has to have a valid user license in that system. Expecially when you want to access control to data on user (vendor) level you nedd to identifiy the user clearly and uniquely which by standard means you need a user for every vendor.
    Hth,
    Michael

  • I installed Office:mac 2011 on my new iMac running 10.8.3 and discovoed my file transfer from my old macbook installed Office:mac 2088. Now I have both installed and none of the office apps work - I keep getting the same error message

    I recently purchased an iMac to replace my 2008 macbook.
    I used migration assitant to transfer all of my macbook files to the iMac. I noticed that I had the old 2008 version of Office:mac 2008 on the iMac and decided to install Office:mac 2011 which installed successfully.
    However, now I can't open excel or word or powwerpoint now using either 2008 or 2011.... I just get an error message saying there was an error and the app had to close. It offers to send a report to Microsoft.
    I tried moving Office:mac 2008 to trash but this didn't resolve the issue.
    Can anyone help (I am not a really sohpisticated user so be gentle)
    Thanks Dave

    Hello Dave,
    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums

  • Apple Mail and Exchange Out of Office Not Working

    Has anyone had issues with Yosemite Mail and setting Out of Office for Exchange 2010?
    I can set Mail to send Out of Office replies but cannot change the scheduled dates from 2/12/1982, 10:00 AM. Even when I do set it, it does not seem to send the OOO notifications. I can set it just fine on my iPhone 6 and Mavericks Mail worked fine for setting the OOO.
    I deleted my account several times and reset it and I can get all my Mail back just fine but OOO still doesn't work correctly. I wanted to try to change the server settings but Mail doesn't allow you to do that for auto connect Exchange accounts.
    Because of this (and my concern with reported issues with updating meetings), I switched back to Outlook 2011 until these bugs get ironed out. This is too bad because I love the notifications feature for Apple's programs.
    I'm running on a 2014 13" MacBook Pro.

    Same issue here. I can see these error messages repeating when I'm trying to change the date.
    2014-12-11 02:29:23,447 Mail[87049]: (
      0   CoreFoundation                      0x00007fff900d564c __exceptionPreprocess + 172
      1   libobjc.A.dylib                     0x00007fff990b86de objc_exception_throw + 43
      2   CoreFoundation                      0x00007fff900d86bd -[NSObject(NSObject) doesNotRecognizeSelector:] + 205
      3   CoreFoundation                      0x00007fff9001fa84 ___forwarding___ + 1028
      4   CoreFoundation                      0x00007fff9001f5f8 _CF_forwarding_prep_0 + 120
      5   AppKit                              0x00007fff8f1e61de -[NSDatePickerCell(NSInternal) _constrainAndSetDateValue:timeInterval:sendActionIfChanged:beepIfNoChange:retur nCalendarToHomeMonth:preserveFractionalSeconds:] + 259
      6   AppKit                              0x00007fff8f1ea5da -[NSDatePickerCell(NSTextFieldWithStepperDatePickerInternal) _commitSubfieldFieldChanges] + 1292
      7   AppKit                              0x00007fff8f1e6528 -[NSDatePickerCell(NSInternal) _finishPendingEdit] + 53
      8   AppKit                              0x00007fff8f1e969d -[NSDatePickerCell(NSTextFieldWithStepperDatePickerInternal) _textFieldWithStepperTrackMouse:inRect:ofView:untilMouseUp:] + 648
      9   AppKit                              0x00007fff8f1e51c8 -[NSDatePickerCell trackMouse:inRect:ofView:untilMouseUp:] + 159
      10  AppKit                              0x00007fff8f018139 -[NSControl mouseDown:] + 714
      11  AppKit                              0x00007fff8f511f4f -[NSWindow _reallySendEvent:] + 12827
      12  AppKit                              0x00007fff8ef9c50c -[NSWindow sendEvent:] + 368
      13  AppKit                              0x00007fff8ef4e096 -[NSApplication sendEvent:] + 2238
      14  Mail                                0x0000000106c767d0 Mail + 272336
      15  AppKit                              0x00007fff8eddae98 -[NSApplication run] + 711
      16  AppKit                              0x00007fff8edc62d4 NSApplicationMain + 1832
      17  libdyld.dylib                       0x00007fff8fbe05c9 start + 1
      18  ???                                 0x0000000000000001 0x0 + 1
    2014-12-11 02:29:23,613 Mail[87049]: -[NSDateComponents timeIntervalSinceDate:]: unrecognized selector sent to instance 0x6180005423c0
    2014-12-11 02:29:23,613 Mail[87049]: -[NSDateComponents timeIntervalSinceDate:]: unrecognized selector sent to instance 0x6180005423c0

Maybe you are looking for