Integrated Business Processes with ERP Systems Textbook

This forum will move to the New SCN as part of our migration to a new platform. Once we make that move, on December 5, it will become a read-only discussion. It will be searchable but will not be part of the site navigation.  If you have questions, please contact me, [Gali Kling Schneider |http://www.sdn.sap.com/irj/scn/bc?u=6v4sgatytpg%3d].

Dear Dr. Word,
I am a graduate student of MIS at Northern Illinois University. I took Dr. Yipeng Liu’s course of Advanced Topic of Information Systems using your textbook - Integrated Business Process With ERP Systems. Your textbook is great. I have a question to discuss with you.
On page 62 of your textbook, I don’t think the accounting process of purchasing supplies is correct. In the example, “GBI purchases office supplies for $500 with a check. Office supplies are expensed; that is, they are defined as money spent rather than treated as an asset upon purchase, even if some of the supplies remain unused. In this case, the relevant accounts are bank and supplies expense.”
Actually, supplies unused are assets of companies. Otherwise we don’t need an account called supplies at all. In the given example, I think we should credit $500 to bank account and debit $500 to supplies account. If at the end of the fiscal year, we used only $300 supplies, then we credit $300 to supplies account and debit $300 to supplies expense account. This is the typical process of supplies accounting.
“Office supplies are expensed; that is, they are defined as money spent rather than treated as an asset upon purchase, even if some of the supplies remain unused. “ This practice actually goes against the Matching Principle of General Acceptable Accounting Principles (GAAP). It’s not a good example especially in textbook, even though lots of companies are doing real business like this.
I am looking forward to hearing your thoughts of my comments on supplies accounting of your textbook.
Best regards,
Tingkai (Tank)

Similar Messages

  • Integrated Business Processes with ERP Systems Textbook Discussion

    Please ask questions to the author team about the content and exercises in the Integrated Business Processes with ERP Systems Textbook

    Dear Dr. Word,
    I am a graduate student of MIS at Northern Illinois University. I took Dr. Yipeng Liu’s course of Advanced Topic of Information Systems using your textbook - Integrated Business Process With ERP Systems. Your textbook is great. I have a question to discuss with you.
    On page 62 of your textbook, I don’t think the accounting process of purchasing supplies is correct. In the example, “GBI purchases office supplies for $500 with a check. Office supplies are expensed; that is, they are defined as money spent rather than treated as an asset upon purchase, even if some of the supplies remain unused. In this case, the relevant accounts are bank and supplies expense.”
    Actually, supplies unused are assets of companies. Otherwise we don’t need an account called supplies at all. In the given example, I think we should credit $500 to bank account and debit $500 to supplies account. If at the end of the fiscal year, we used only $300 supplies, then we credit $300 to supplies account and debit $300 to supplies expense account. This is the typical process of supplies accounting.
    “Office supplies are expensed; that is, they are defined as money spent rather than treated as an asset upon purchase, even if some of the supplies remain unused. “ This practice actually goes against the Matching Principle of General Acceptable Accounting Principles (GAAP). It’s not a good example especially in textbook, even though lots of companies are doing real business like this.
    I am looking forward to hearing your thoughts of my comments on supplies accounting of your textbook.
    Best regards,
    Tingkai (Tank)

  • Can any please explain the integration business process between PS and CS

    Dear Guru's
    Can any please explain the integration business process between Project systems (PS) and customer service (CS).
    Business Process: We do machinery Erection or commissioning, later we do provide service warranty for one year.
    How we map this Business scenario in sap.
    Regards,
    Bhanu

    basic steps for such a process would be
    1) Use PS functionality for your machinery erection or commisioning work. Once the physical work is completed then close porject
    2) Use CS functionality for warranty and service - set up the work as a functional location on customer site (PM/CS functionality)
    3) Use service order to manage any service calls on the object which could require billing via SD module - bill value may be zero if under warranty

  • Essentials of Business Processes and Information Systems Sample Documents

    [Official Publisher site for instructor information|http://www.wiley.com/college/magal]
    [Essentials of Business Processes and Information Systems - Overview  |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0b9b632-f3c9-2b10-9d96-d1048e934e57]
    [Essentials of Business Processes and Information Systems - Sample Chapter |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/203e9e83-f3c9-2b10-eab9-8e01ed2ca33f]
    [Essentials of Business Processes and Information Systems - Sample SAP Exercise|http://www.extrabandwidth.com/BPIS/Magal_Word_Sample_SAP_Exercise_Fulfillment.swf]
    Essentials of Business Processes and Information Systems - Sample Instructor's Guide-- please request a copy of this material individually.

    Hi Rex.  This material is a sample of what's in the textbook, so you'll have to acquire a copy of the textbook (paper or digital) to get the entire set of content. 
    http://www.wiley.com/WileyCDA/WileyTitle/productCd-EHEP000216.html
    http://www.amazon.com/Essentials-Business-Processes-Information-Systems/dp/0470230592/ref=sr_1_1

  • Weblogic Integration Business Process Tutorial (10.2)

    Hi I'm going through the weblogic integration business process tutorial and when I get to Step 5, "Run the business process" I get a bunch of errors, including the ones below:
    s4s-elt-invalid-content.1: The content of '#AnonType_Acknowledgment' is invalid. Element 'attribute' is invalid, misplaced, or occurs too often.
    s4s-elt-invalid-content.1: The content of '#AnonType_AckRequested' is invalid. Element 'attribute' is invalid, misplaced, or occurs too often.
    s4s-elt-invalid-content.1: The content of '#AnonType_Description' is invalid. Element 'attribute' is invalid, misplaced, or occurs too often.
    src-resolve: Cannot resolve the name 'eb:MessageHeader' to a(n) 'element declaration' component.
    src-resolve: Cannot resolve the name 'soap:mustUnderstand' to a(n) 'attribute declaration' component.
    Has any one run into this problem while going through this tutorial and if so, have you found a solution for this?
    Thanks.

    The following page is right from the WLI documentation. Are none of these samples useful to you?
    [http://edocs.bea.com/wli/docs102/sol_samples/index.html]

  • MDM Integration with ERP system

    Hello MDM Guru's.
    In our system Landscape, use Baan ERP system to fetch data into MDM, cleanse it and push data to SRM/BI system for Business Requirements.
    Our MDM is neither connected to any R/3 (ECC) system. we want to have a kind of Reports developed for MDM Data present in our system based on Companies (our Manufacturing sites) and have a automatic mapping of our Manufacturers , Suppliers & Customers based on Global and local Stratergy.
    According to my understanding, we can use MDM API's (ABAP or Java). As MDM is not integrated with any of the ERP (ECC or Netweaver Data base)?
    We have options to integrate MDM with ECC 6.0 & Netweaver system. Which could be a better option to connect with? we are planning to integrate MDM with E-Portal too, could Portal data base be used.
    Please guide me.
    Thanks in advance
    Cheers
    MSR

    Hi Srihari,
    If you want to use MDM in you landscape and store and cleanse data in it and then sent the cleansed data to a reporting tool for analysis then you can do it in one of the methods:
    - Either connect MDM to the other systems in your landscape using XI as the means of data trnasfer
    - Or connect MDM to other systems using the API.
    In the first method.you need to use PI/XI to manage the flow of master data to and from your MDM system to others. MDM can be used for data cleansing and enrichment within MDM before syndicating it out.
    In the second method you can connect to MDM through other systems using the API.
    As you mentioned about reporting on the master data in MDM based on the Companies or manufacturing sites etc.You can achieve this suing MDM ABAP API.
    ABAP can be sued as a reporting tool.wherein it will connect to your MDM system through the configured API and fetch the MDM data and generate simple reports .
    If you wish to access the MDM data online you can use portal front end. but in this case portal wont be capable to store any information as it is just a front  end.
    You will have to use MDM as a backend storage system.JAVA API can be used for futher customization on EP.
    For ABAP API use you can refer the below link:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/tip%2b%2bMDM%2bABAP-API%2b%2bThings%2bto%2bRemember%2b(for%2bStarters)(abap api)
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e060251e-b58d-2910-02a2-c9a1d60d9116 (abap api)
    For Java API  you can refer the below link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2d18d355-0601-0010-fdbb-d8b143420f49  (Java API)
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • SAP NetWeaver Application Server ABAP & SAP Business Warehouse 7.4 SP8 on SAP HANA with ERP-System

    Hello,
    I have a running Instance of SAP NetWeaver Application Server ABAP & SAP Business Warehouse 7.4 SP8 on SAP HANA 1.0 SP8.
    Here I have the minisap Licence of A4H.
    When I get the Licence of ERP - do I have a fully ERP System on HANA ?
    Or do I need a new Instance?

    Hi Julia,
    even if you or your company have an SAP license for ERP, you are legally not allowed to install the license key into the free offering it because you have accepted the terms and conditions of the trial/developer version.
    If you want to use your own licenses, you would need to switch to the BYOL model where you bring in the license. For that you would need to purchase the SAP Cloud Appliance Library subscription. You get more details here (CAL FAQ - Business related questions ). To purchase the SAP Cloud Appliance Library subscription you would need to select the "Unlock full library" link on the top right corner of the Subscriptions screen on http://cal.sap.com.
    Best Regards,
      Hannes

  • How to start a BPM process from ERP system

    Hi,
    I created a process in Netweaver Developer Studio with the Process Composer in SAP CE 7.1 BPM, now I want to automatically start the process by saving a SAP document like purchase requisition or purchase order. Therefore I think about implementing a UserExit / Badi or something else.
    The following systems are available in my Landascape:
    - PI 7.1
    - ERP 2005
    - CE 7.1 EHP1 with ESR
    Does someone have an idea how to start the BPM Process or how to trigger start event?
    Greetings,
    Christian

    the process by saving a SAP document like purchase requisition or purchase order.
    Based on your business process, you will have to decide what data should be sent to other system. It could be in the form of Idoc trigger or an RFC calls. If there are non-SAP systems involved, you should be using PI 7.1 too. In that case, you can communicate using Abap proxy call too. For this you may either call an RFC internally in a report and schedule it.
    Regards,
    Prateek

  • Integration of Financials with external systems

    Hi,
    I am strugling with an implementation where the client is not sure if Oracle Financials suits his business processes
    Overview of situation on Hand:
    We do not have the product installed as yet at the client site
    Products of Oracle Financials to be used :General Ledger, Account Receivable, Account Payable, Fixed Assets,India Localization Patch
    Products of Oracle Applications NOT available for use :
    Purchasing, Inventory, Order Management
    (All these areas are being covered by developing a customized Bespoke system)
    1.     Is it possible to use Oracle India Localizations (with regards to the excise functionality, for e.g. claiming of ModVat, the various excise registers that are to be maintained for e.g. RG23 A, RG23C,etc ) in the above situation (without implementing Purchasing, Inventory, and Order Management?).
    2.     Further, while passing the Vendor’s Bills (in Oracle Payables), one of the criteria for PO Matching is to check if the ModVat has been claimed. Is this functionality available in Payables with the India localization patch?
    3.     Does Oracle India localization cater for VAT requirements?
    4.     Is an Open Interface available to transfer Purchase Order data from external systems to Oracle Purchasing tables (which are shared by Oracle Payables the names being PO_HEADERS, PO_LINES, PO_LINES_LOCATIONS, PO_DISTRIBUTIONS, PO_DISTRIBUTIONS_AP_V (VIEW OF PO_DISTRIBUTIONS), PO_RELEASES (Blanket Purchase Orders), PO_LOOKUP_CODES) at transactional frequency? However, if the oracle purchasing module is not being used, can the interface tables of Purchasing be used?
    5.     An open interface (Payables Open Interface) is available in Oracle Payables to import the Invoices from external systems. While importing these invoices, does the system expect to have the Purchase Order data in the PO tables mentioned in the point above?
    6.     Is an Open Interface available to transfer Quantity Received/Accepted data from external systems to PO_line_locations table to enable carrying out of 2/3/4 way matching of Purchase orders with invoices? Can the 4 way mathcing be carried out in AP by just importing Purchase Order data??
    7.     Can the Credit Card Transaction Interface be used for uploading employee expenses / advances settlement (not carried out via credit card) directly from feeder system?
    8.     Is it possible to use Open Item interface (including import concurrent program) even though Inventory module is not being installed ? If yes, then we would like to use this interface for updating Item master from bespoke system..
    9.     Can Auto Invoice API be used to import invoices from feeder system / legacy system (via RA interface Tables) into the Oracle receivable invoice tables? Is order number as column a prerequisite for successful completion of Auto Invoice API?
    10. Where should the Masters be kept....OF of Bespoke
    eg. Employee master, Inventory Item Master etc.
    11. What is the best strategy for keeping the data in Bepoke and OF related to Masters in sync?
    I have got various answers to these questions .....but some seem to contradict each other.
    PLEASE HELP!!
    Thanks,
    Kamana

    Dear Kamana,
    Can you send me the replies given by our other Forum Friends, let me analyze the entire stuff and get back to you with a single consolidated bible for all your questions.
    Gopal

  • Kick off a business process with JMS message

    I'm a newbie with a job that's way over my head and I'm thouroughly confused on
    the logic involved with kicking off a business process (workflow) through the
    reciept of a JMS message. The docs say it can be done. I have a business process
    in one project folder of an enterprise app, its start node is a channel subscription.
    Can I somehow send a JMS message directly to the business process? (Send a message
    NOT from within the weblogic environment, but from outside) I have created a
    Message Driven bean in a seperate project folder of the same application as the
    business process. From an outside client, I think I might need to invoke the
    MDB with a JMS message, then call the business process from there. Is this totally
    off-base? What do event generators have to do with any of this?
    Please help.

    Yes, you use the event generator.
    Open up the Weblogic Integration console, click on Event Generators.
    Add a JMS Event generator that listens to the queue you are interested
    in, and then select the channel that your process has subscribed to.
    Lisa wrote:
    I'm a newbie with a job that's way over my head and I'm thouroughly confused on
    the logic involved with kicking off a business process (workflow) through the
    reciept of a JMS message. The docs say it can be done. I have a business process
    in one project folder of an enterprise app, its start node is a channel subscription.
    Can I somehow send a JMS message directly to the business process? (Send a message
    NOT from within the weblogic environment, but from outside) I have created a
    Message Driven bean in a seperate project folder of the same application as the
    business process. From an outside client, I think I might need to invoke the
    MDB with a JMS message, then call the business process from there. Is this totally
    off-base? What do event generators have to do with any of this?
    Please help.

  • Implementing a business process with Oracle software

    Hello Oracle community,
    I'm new to Oracle software and would like to know which tools from Oracle I need when I want to implement a WSDL based business process. All ressources I would like to access within the scope of the process are described with WSDL and I would like to model the whole process with Oracle software.
    I guess that I'll need at least the JDeveloper Suite so the post is hopefully not completely off-topic in this forum.
    In particular the questions are:
    - Which Oracle Tool can model a business process (and can handle WSDL)
    - Which Oracle Tool can implement the technical aspect of a business process (might be the same tool)
    - Which Oracle Tool (Oracle 9iAS I guess) will I need to deploy & run the finished business process
    - And the last question: does Oracle support BPEL?
    I need this informationen for my studies at my university. I hope that someone can point me in the right direction.

    Unfortunately the recently announced BPEL (Business Process Execution Language) Designer is available as an IBM Eclipse Plugin, so yes you need to be running the Eclipse IDE to be able to use the BPEL on top of Oracle Application Server (OC4J).
    A Jdeveloper plugin for BPEL I guess would be available sometime next year ?

  • Can EWM be implemented with ERP systems ?

    Experts,
    I am confused about implementing the EWM with ERP or SCM .I saw in a SAP website that the training for EWM requires the ERP and SCM both platforms .I don't understand this. Even for the certification in ERP (P_LEWM_64) , it includes the EWM functionality.Does this mean that even on ERP , can we implement the EWM ?
    Please share your thoughts

    Check this link
    [http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/fbdae309652ecbe10000000a11466f/frameset.htm]

  • Business Objects With ERP

    Actually I need your advice for a requirement I have a customer that donu2019t want to implement BW at all but he is very interested in SAP Business Objects BI Tools This customer has a huge amount of data and the manager insisting not using BW or BWA So my only choice is to use only form BOBJ BI package: Xcelsius and Crystal Reports But I am also wanted to provide WebI and explorer but I know this impossible
    I had read in SDN Articles that I can use Federator to connect to the ERP directly and so I can create a universe and so I can deliver Webi Document and Explorer 
    So I need your advice and your recommendations for this

    Hi
    currently  you have the following options:
    1. You can use SAP rapid marts. They contain Data integrator mappings (you need an installation of the DI for this) to extract and load your SAP R/3 data into a relational database. Additionally they provide universes (based on a relational schema) hich ill allo you to build WebI reports.
    2. You can use the R/3 connector for the Data Federator (You need a DF installation for this). Please note that the R/3 connector is not yet a product rather just a PROTOTYPE. Take a look here: SAP BusinessObjects Web Intelligence Reporting for SAP ERP [original link is broken]
    3. You can try to access the underlying database directly using the appropriate DB drivers. Please note that this is NOT RECOMMENDED. This way you cannot leverage security defined on the R/3 side in your WebI reports and you will not be able to access all data as available in R/3 since some of them are stored encoded/compressed in the underlying tables.
    4. Instead of WebI you can use Crystal Reports and the R/3 drivers (eg. SAP Tables, Functions, Cluster) provided when installing the integration kit for SAP.
    Regards,
    Stratos

  • Integration of CRM with legacy systems

    Hi Experts,
    We are planning to implement CRM on SAP Enterprise Portal. There are 2 non-SAP systems and one R/3 system in the system landscape at present, all to be connected to CRM which will be used as a front-end (with EP). Billing happens in the non-SAP system (Genesis?). Communication between non-SAP systems and CRM to be in XML.
    Question:
    Whether XI is required or whether it would suffice 2 use just CRM Middleware itself for the XML communication?
    Any suggestions in this regard are highly appreciated
    Regards,
    Narayana

    Hi Lakshmi Narayana,
    For data transfer between SAP system and Non SAP(External System) .There are two options available.
    1.Use CRM middleware with XIF adapter(External Interface)
    2.Go for SAP Netweaver -XI (External Interface)
    If you use CRM middleware middleware will carry the data in the form of Bdoc's(Business Documents)
    <b>If use XI in the landscape:</b>
    XI will converts the data into Idocs and push it to the FTP server,From FTP server external system will receive the data.
    Allot Points if my post Helps!!!!!!!!.
    Regards,
    Sathya Reddy.

  • Where to configure Business One with email system

    in SBO 2005A there is an option to send email under Message/Alert Overview.
    Wonder where can configure to integrate with Outlook in order to send the email from SBO, currently the emails are sitting in the 'Outbox' of SBO Message/Alerts overiew.
    KC

    You dont need to install MS outlook Integration, unless you wish to send the email via Microsoft Outlook.
    You can send email simply by connecting the Mailer service in the SAP business Server suite manager to your exchange server:
    On the SAP server (or where the SAP Businesss Server Suite Manager, or server tools, is installed) double click on the suite manager and select mailer (if this is not installed, go to control panel, add/remove programs and modify the server tools to include mailer).
    In mailer, you will need to set the schedule (maybe to run every minute if you send many emails and your servers can handle an email request every minute)
    then in settings enter the exchange server name,
    then in connection set the SQL DB username and password,
    and finally in the database option, select which databases you wish the mailer to be listening to.
    then stop and re- start the mailer service and you should be away.
    hope this helps.

Maybe you are looking for

  • Error INS0029 while installing repository

    Hi OWB gurus, i'm encountring INS0029 error while installing the OWB repository.I'm using Oracle 10G(10.1 Enterprise version Windows XP) and OWB 10g(10.1.0.2.0).here are the lines witch explain the error in the C:\Oracle\OraDev10g\owb\reposasst\log.t

  • Error in DMS document

    Hello all, I am using the following FM for DMS storage of documents. BAPI_DOCUMENT_CREATE2 When i execute the BAPI i get the following error : Error while checking in and storing: D:\DOCUMENTS AND SETTINGS Can anyone help out on the same and tell the

  • IBook has mini DVI?

    Is that odd looking little output on my iBook a mini DVI connection of some sort? Of coarse, my iBook only came with a "wierd port" to VGA adapter. Is this port DVI and if so, what kind of cable do I need to connect my iBook to a DVI display? As alwa

  • How to play .swf files stored in database?

    Ok, i am pretty stuck with this... Here is the problem: I have upload form which upload file to the server folder and in the database insert path. That works fine. What is my problem? When i go to dreamweaver and make insert SWF and i give the path t

  • How to display img with HTMLEditorKit

    In my web-based application I am using a HTMLEditorKit and HTMLDocument to: 1. Read an html template from the disk. 2. Parse the html template with MessageFormat.format(), to replace all variable data (eg. {0}, {1}) with data entered by the user. 3.