Integration Scenario Configurator

Hello!
I want to generate the receiver determination for an integration process on XI 3.0 SP10 with the Integration Scenario Configurator.
I have created an Integration Scenario in the Integration Repository, there are no errors when checking with F7.
If I open it in the Integration Directory and go to Integration Scenario Configurator -> Check Configurability I get the following error message:
"Component View /Role <my Integration Process>: Only connections with interfaces that belong to the integration process interface are permitted"
What does the error message mean? What do I need to change to eliminate this error message?
The connections point to interfaces I have defined in the same software component as the integration scenario and process. For the integration process I have created abstract interfaces.
Regards, Tanja

Hi Simon!
I was able to solve this problem some weeks ago but thanks for your hint anyway.
As you have mentioned the problem was that in the Integration Repository the integration scenario was not consistent with the used integration process as it contained a wrong interface.
After I have corrected the integration process in the Integration Repository and updated the changes in the Integration Directory the generation with the Integration Scenario Configurator worked without any problems and the status of the process changed to 0 in SXI_CACHE.
Regards, Tanja

Similar Messages

Error in Protocol for Generation of Integration Scenario Configuration

Hi,
If I try to generate my Integration Scenario in simulation or real mode I get the follwoing error allways in the "Generation Statistics" section (last entry):

Error when creating or changing configuration objects 0
If I save it and check it - no errors could be found. Any ideas?
Regards,
Christian

Hi Christian,
you working with SAP software
> Error when creating or changing configuration objects 0
means:
zero errors...
Regards,
Udo

Doubt in Integration Scenario Configurator- Not able to assing sender chane

Hi All,
i have imported the integration scenario to the Directory.
Assigned the relevant business services to both Sender and Receiver.
I am able to assign a Receiver Communication Channel.
But for sender system communication system , it shows 'Not Required'. i am not able to do anything. Sender is a Third Party System. I have created a sender JMS channel under it.
could someone suggest what is to be done?

If you configured your sender BS and CC correctly it must show..
one try go and create a dummy sender agrement for the same interface check it is allowing there ,,if yes then u doing something wrong in configuaration scenarion.

XI Error - Integration Scenario Configurator

When running Step 2 - Assign Services, I choose my Business Service and then Click on Assign, I receive the following error:
An assignment to a business service must be defined for each business system service. Unassigned business system services exist. These can be removed automatically.
Has anyone seen this and please detail to me what you did to resolve it? We are trying to implement E-Recruiting in this particular scenario.
Thank you!
John

Hi John,
First of all are you doing B2BScenerio,If not in A2A scnerio we can not use Bussiness service.Only Bussiness systems has to be used and you can only assign Bussiness system.
**Reward if helpfull**

Integration Process in Integration Scenario

Hi All,
I am trying to create an Integration scenario which can be used at configuration time to create all the config object. But during configuration time, in Assign Services step in Integration Scenario Configurator, it is only showing Business Systems under the product, previously configured in SLD. But i want to use the Imported Integration Process as the sender service. Is it possible?
Also the Assign Service screen is showing Assign Business System Services for A2A configuration. But we are using B2B configuration sometimes. So is there any way to do this?
regards,
Biranchi

Hi
Thanks for the reply. The above switch problem is solved. But now I am facing a new problem. I am making a synchronous call to BAPI from my BPM. How can this be implemented in Integration Scenario.
So how can I send a input message from BPM to BAPI and then take further steps only after getting response from BAPI. Is there any way to define synchronous Action??? And another point to be noted is that we are not using any communication channel to send the message from BPM or receive the response in BPM. We have only a receiver communication channel which receives the message for the BAPI.
So please help in solving this problem.
regards,
Biranchi

Multiple component view in integration scenario

Hi
I have multiple component views defined in my integration scenario.
When i try to configure these component view in Integration directory in integration scenarion configurator, if I select the component view i want to apply then the systems give a message " All configuration settings made in the current component view will be lost".
This means that if i have configured the first component view and then try to configure the second component view then setting of first view get lost.
i want to have all the configure all the component views in the integration scenario.
Please provide some pointers for the issue.
Thanks in advance
Regards,
Amit Deshpande

Amit,
When you have multiple component views in the Integration scenario, you would ideally want to create separate configuration scenarios for each component view.
So for eg. if you have four component views, 4 different configuration scenarios can be created using the integration scenario configurator. The only thing is that you would have to repeat the integration scenario configurator steps[Tools->Transfer Integration Scenario from Integration Repository] 4 times, once for each component view. If you notice, you can change the name of the configuration scenario each time you start afresh.
The message is a warning that if you go back during the integration scenario configuration process[the first step is the selection of the component view for which you want the configuration scenario] and change the component view then all the changes made thus far would be lost.
For e.g if you are in step 3[Assign Services, I think] and then go back and change the component view, all the changes made for the original component view selected would be lost.
Hope this helps.
-Anand

Integration Scenario Configuator and Business Services (B2B)

We use Business Services to define the services provided by our external business partners (e.g. a transport organization has defined some webservices to which we connect to).
The reason why we use Business Services is that we don't have to define them in the SLD. And we understand from the documentation that external business systems should be defined as Business Services and not Business Systems.
Now we want to use the Integration Scenario Configurator, but when we define a B2B service in the Integation Scenario, we cannot create the communication channels with the wizard. Futhermore the other object (receiver determination etc.) is also not created for the business service.
When we take a look at the definition of a B2B scenario in the SAP documentation, the documentation describes a complete different use of B2B. We understand from the documentation that B2B is a cross company XI landscape where all partners have there own XI system. This also explains the behavure in the configurator since one party cannot access its own business systems.
This leaves us with the following questions:
1. Is B2B only possible for XI to XI scenario's?
2. Is a service provided by a partner a business system?
3. And do we have to include all communication end point in the SLD?
Kind regards,
Christiaan Schaake

Dear Christiaan,
I encountered the same problem. What I did was that I created a party for the external business partner and assigned a business service to it. Beside this you have to check the box (ext. party w. B2B comm) under communication type in the application component in the integration scenario.
When you have done this you can create comm. channel with the wizard and also the other objects.
see: http://help.sap.com/saphelp_nw2004s/helpdata/en/e6/908d3f7057eb0ce10000000a114084/content.htm
Regarding your questions: depending on the way we think, we can come up with different answers. I don't think this is what you're looking for.
Maybe someone else can give you a clear answer.
Kind Regards
Ron van Steen

Use of Integration Scenario & Actions??????

Can body tell me the use of Integration Scenario & actions in Integration repository?

In simple terms...
Integration Scenario represents one view of your complete integration scenario.
It includes all the components like business system, interfaces, business process etc.
You can import the same Integration scenario designed in IR to ID and use it for configuration purpose. No need to define all objects separately. ALL under one roof.
1. Integration Scenarios are definitely not just for documentation. With them, you avoid having to create the Configuration Objects manually (or even interface by interface, using wizard); you just run the scenario configurator, relate each application component to a business service/system/integration scenario, create/refer necessary Communication Channels and that's it;
.2. Of course you can use business services in Integration Scenario Configurator, but only for B2B communications. Hence, your application component must be set with "external" flag (same for action);
3. You don't "import" BPM from IS into ID. You just refer to the Integration Process as a service, meaning, the only information you have about IP in Integration Directory is its interfaces, inbound or outbound (output or input ones; actually they are all abstract);
Finally, for the actual question: an action reflects an execution within the integration scope, meaning, a system triggering an access to other system(s). In XI's scope, that execution means one interface, and that's exactly the information that goes into the action: the interface, its type (message interface, imported RFC/IDoc etc), whether it refers to an internal (reflecting an A2A scenario) or an external (reflecting a B2B scenario) system and whether it's an outgoing or incoming message (outbound or inbound, in the point of view of the application systems).
**************Award points,if found useful
Edited by: BVS on Apr 1, 2008 11:43 AM

Configuration Scenario for BPM Using Integration Scenario

hi All,
I Have an Scenario where i am using BPM. Most of the blog tells about manually creating all Configuration objects. I had created an Integration Scenario for this scenario by referring to the earlier threads available for same.
Hoe to Create Integration Scenario for BPM Scenario
Integration Scenario in BPM and few more.
My IS looks like
Sender App Component - Integration Process - Receiver App Component
Now when i am trying to create Configuration scenario for same using model configurator, i am getting Model as "Not Configurable"
And when i click "Configurability Check" Button, i am getting below as status:
Component view IS_POC_BPM: Connection from receivePayload to getABSPayload does not have an inbound service interface
Component view IS_POC_BPM : Connection from sendABSPayload to getPayload has no outbound interface
getABSPayload and sendABSPayload are actions for Abstract interfaces.
IS_POC_BPM is the Integration Process Name.
Also in Integration Scenario, when i create connection between sender action to BPM action there is no inbound interface coming. And viceversa.
Please help me in identifying if i am doing any thing wrong in creating this scenario.
Is it possible to create Configuration Scenario for BPM Using Integration Scenario?
Thanks,
Mayank
Edited by: Mayank Gupta on Apr 21, 2010 6:35 AM

I think you shoudl refer the available Integration Scenarios created for BPMs in IR --> SAP BASIS --> http://sap.com/xi/XI/System/Patterns
Sender template will have the Action with Outbound Service Interface and then in the BPM Template the action will have Inbound Interface.....then within the BPM itself this inbound will be mapped to Action with Abstract Interface
may be after looking the Integration scenarios you will get more idea
Regards,
Abhishek.

Integration scenario and configuration scenario - is it madatory

Hi,
Integration Scenarios are not mandatory, the reason for creating them is given in the blog you mentioned:
The advantages of defining integration scenarios in the Integration Builder (design tool) are as follows:
· The integration scenario provides you with an overview of the process and the process flow
· The integration scenario club together all objects like SWVC,Interface objects, mapping objects,integration processes.You can access all of these objects from the integration scenario.
· The integration scenario gives you the design time information which is required for its configuration.
The configurtation items are getting created.
Regards
Patrick

Hi Priya,
There are two things here.
1) Create the Integration Scenario in the IR.
2) Use the wizard to configure the integration scenario in ID.
The Integration scenario created in the IR acts as a template to create the configuration objects in ID.
The wizard will create the actual configuration objects only (not just documentation).
But creating integration scenarios is not mandatory.
YOu can as well create all the configuration objects manually.
Generally, you will go for Integration scenarios if you are building a general purpose product (Product based ).
If it is a project that you are building for a particular customer, you can chose to create the configuration objects using the configuration scenario approach.
Regards,
Ravi kanth talagana

Configuring Process Integration Scenarios for Advanced Adapter Engine

Hello @all,
i've an asynchronous SOAP scenario and would like to configure an integrated configuration for Advanced Adapter Engine using a process integration scenario. In the documentation (Link below) it is described, that you can select local communication using AAE in the model configurator, but I couldn't find any hint. Any idea?
Documentation:
http://help.sap.com/saphelp_nw73/helpdata/en/48/ce987b18d3424be10000000a421937/content.htm
Thanks and kind regards
Andreas

Hi,
Use thse links:
Advanced Adapter Engine Configuration in PI 7.1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?QuickLink=index&overridelayout=true&47047071760975
Sreeni.

Need help for configuring integration scenario for AII

Hi,
We are referring to "RFID-Enabled Outbound Processing: Configuration Guide" for transferring materials from ECC to AII through XI.
So far we have been successful sending the IDOC to XI.
When we display the XML message in XI using IDX5, we get the error message "No receiver could be determined".
I request you to help us with the configuration of the integration scenario in XI.
Regards.
Gaurav

Hi Yogesh,
Thanks for reply.
Maintaining XI Directory configuration
u2022 Generate business scenario using business scenario configurator
u2022 Creating a scenario
 It is fine upto these two steps
u2022 assigning business systems
 We have assigned "AII" business system
 only (receiver)
u2022 creating communication channels
 Following parameters are set for comm channel
 Adapter type: HTTP
 Configured as Receiver
 Transport Protocol: HTTP: 1.0
 Message Protocol: XI payload in HTTP Body
 Adapter engine: Integration server
 Addressing type: URL Address
 Target host: <name of AII system>
 Service number: <service no>
 path prefix: /sap/xi/engine?type=entry
u2022 defining receiver determinations
u2022 defining interface determinations
u2022 defining receiver agreements
 All these were generated automatically
Are these configurations alright?
Regards,
Gaurav

Configuring Process Integration Scenario

Hi,
I have created a Process Integration Scenario in ESR and trying to create ID objects.
I am referring this blog: /people/shailesh.mane/blog/2006/06/29/b2b-configuration-part-ii--creating-the-configuration-using-the-automated-configuration-tool
I am confused while running the wizard.
1) Can anyone please confirm what objects should I create in ID before running the wizard
I have a External Party --> SAP PI -> IDOC scenario (with multiple actions inbetween). I am using PI7.1.1
Thank you,
Pankaj.

Hi Pankaj ,
While you design your process integration scenario . while you do insert application component for sender and receiver
Have you checked the tab " Communication tab --" External party with B2B communication."
I am not sure but this is your problem I guess ,
Please have a look at the link
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/ce988318d3424be10000000a421937/frameset.htm
Since you are using IDocs , you cannot use integrated configurations( not sure whetehr its supported in your Service pack version ) hence no use of "sender uses virtual receiver "
http://www.riyaz.net/blog/local-processing-in-the-advanced-adapter-engine-using-pi-71/technology/sap/494/
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20c237f1-3caf-2b10-3a83-cce9ed5fbdf3?
QuickLink=index&overridelayout=true
You can use sender uses a virtual receiver while creation of sender agreement then you need not make separete receiver determination and interface determination , in case of B2B scenarios try that option as well
let me know if it works or not
Regards
Ninad
Edited by: Ninad Sane on Oct 20, 2010 8:36 AM
Edited by: Ninad Sane on Oct 20, 2010 10:54 AM

Difference between Process integration scenario and configuration scenario.

Hi,
Please tell me what is difference between Process integration scenarion and configuration scenarion in SAP PI.
Is Process integration scenario is BPM concept? also what is the advantages over configuration scenario.
Regards,
Manigandan

Hi Manigandan,
Speaking widely:
Process integration scenario: there is a ccBPM, like the workflow in ABAP, even when you one inside the PI it's generated a workflow in the ABAP stuck
Configuration scenario: it is object to link the integration directory and the esr/IR when you define the logic of your implementation. It isnt mandatory, but you can organize better you develoments if you make an scenario for a "real scenario" like a file to soap integration, you can define it like a configuration scenario.
Regards.

Adding a new reciever to an existing integration scenario of conf in PI7.0

Hi SapAll.
here i have got a requirement to add one more reciever to an existing integration scenario in Integration Directory(Configuration).
this Integration scenario is for sending the idoc MATMAS.MATMAS05 From 5 Different SAP-R/3 Systems to 2 Recievers.
here iam using 5 different business systems with idoc communication channels for sending idocs and 2 business systems for recieving idocs in file format with file adapters.
so when iam trying to create new reciever detarmination or Interface Determination, it says object already exists.
but i can created reciever agreement without any error.
so can anybody guide me on how to create the Interface,Reciever Determinations without any error.
regards.
Varma

now i just created a new business system with file communication channel
Why have a Business System for a FILE channel? We normaly use Business Component/ Service.
You mentioned IDOC SENDER channels....why? For IDOC we just create Receiver channels...unless you want to specify IDOC packaging.
when iam trying to create a reciever detarmination from one of the existing sender system say like BUS_SENDER2 to new
reciver system ex:NEW_BUS_RECIEVER it says object already exists.
Receiver Determination can have the same BUS_SENDER2 system/ service as sender....but it should not have the same Interface Name....this is where PI is throwing the error.
There already exists a Receiver Detremination with BUS_SENDER2 as source system and the same message interface.
You can reuse the same RD by just entering one more receiver system/ service below the already existing one (in the RD)
In short just search your ID and you will see a RD created with the source details which you are trying to use.
If you want to see a difference, then create a new sender service/ system and then use this to create the RD!
Regards,
Abhishek.

Integration Scenario Configurator

Similar Messages

Maybe you are looking for