[Intel] Did you OC your P4 2.8 Northwood/Prescott on 865PE-NEO2-LS? Yes=post here plz!

I'm still looking for some starting reference points for anyone that might have successfully overclocked their P4 2.8Ghz CPU on an 865PE-NEO2-LS board, especially the Northwood. If you were able to successfully accomplish this, please post your specs here. So far (further testing is needed to confirm stability), here is only what I've got:
I'm also open to any further ideas/suggestions if you would like to offer...
Configure SDRAM Timing by SPD   Disabled
CAS# Latency   3
RAS# Precharge   4
RAS# to CAS# Delay   4
Precharge Delay   8
Burst Length   8
AGP Aperture Size   128
FREQUENCY/VOLTAGE
Performance Mode (slow, fast, turbo, Ultra Turbo)   SLOW
DRAM Frequency   AUTO
Adjust CPU Bus Clock (Mhz)   222
DDR Clock (Mhz)   444
Adjust AGP/PCI Clock (Mhz)   66.66/33.33
CPU Vcore Adjust   Yes
CPU Vcore   1.5375
DDR Power Voltage   2.7500
AGP Power Voltage   1.6000
SiSoftware Sandra Prof. 2005 System Info
Front Side Bus Speed (4x)/Memory Bus Speed (2x)   222
Front Side Bus Data Rate (FSB Speed x4)   888
Memory Bus Speed (FSB Speed x2)   444
CPU SPEED (GHz with 14x multiplier)   3.11
As a point of reference (yet again), here is my baseline system specs:
ADVANCED CHIPSET FEATURES
DRAM Timing Setting…
Configure SDRAM Timing by SPD Enabled
CAS# Latency 2.5 Clocks
RAS# Precharge 2 Clocks
RAS# to CAS# Delay 3 Clocks
Precharge Delay 5 Clocks
Burst Length 8
AGP Aperture Size 128
FREQUENCY/VOLTAGE
Performance Mode
(slow, fast, turbo, Ultra Turbo)TURBO
CPU Ratio Selection Locked
DRAM Frequency 400 Mhz
Spread Spectrum Disabled
Adjust CPU Bus Clock (Mhz) 200
DDR Clock (Mhz) 400
Adjust AGP/PCI Clock (Mhz) 66.66/33.33
CPU Vcore Adjust No
CPU Vcore 1.5250V
DDR Power Voltage 2.65V
AGP Power Voltage 1.50V
SiSoftware Sandra Prof. 2005 System Info
Front Side Bus Speed ( 4 x ) 203
Front Side Bus Data Rate (203x4) 812
Memory Bus Speed (2 x) 203
Memory Bus Speed (203x2) 406
CPU SPEED (GHz with 14x multiplier) 2.84
865PE-NEO2-LS (601-6728-020)
AMI BIOS version 2.3 (7-16-2004)
P4 Northwood, Socket 478, 2.8 Ghz/800Mhz FSB HT Enabled
4 DIMMS (256MBx4)=1GB KingMax PC3200 DDR400, Model # MPXB62D-38KT3R-PEA Speed PC3200
PowMAX PS LP-8800D, 400 watt, max load +3.3@28A,+5@30A,+12@25A,[email protected],[email protected],+5vsb@2A, 70% min@full load
INTEL 865 .INF Drivers (6.0.1.1002 5/7/2004)
Main: Western Digital Raptor, 10K rpm, 36GB
2nd: Maxtor ATA133 7200rpm 120GB
CD-RW: Lite-On 52x32x52
BFG Tech GeForce 6800 GT OC 256MB Graphics Card
SoundBlaster Audigy 2

Thanks guys for the replies. Yes, you are right, I was hoping specifically for the 865PE-NEO2-LS board, and see no responses. At this point, hopefully my 3.4 Northwood should be here today or tomorrow. On this board, I just could not get past 3.1 Ghz with my 2.8, and it seems as soon as I started creeping towards the FSB of 230, things really went wacky/unstable. No matter if I raised the voltages, loosened memory timings, etc. But having said that, CONGRATS to you guys for getting your 2.8s juiced up - I wish I had better luck!
Obviously, my next question would be is how well does the 3.4 Ghz Northwood O/C - isn't the ceiling about 4Ghz?

Similar Messages

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
To help avoid future transgressions set the Restrictions for In-App Purchases...
Settings > General > Restrictions
Understanding Restrictions > http://support.apple.com/kb/HT4213

HT3180 My Apple TV is stuck on the "Did you forget your password?" Apparently someone used the wrong password too many times. How do I reboot this so I can sign on?

My a Apple TV is stuck in"Did you forget your password?" Apparently someone tried to sign on. How do I reset this so that I can sign on?

You will need to contact iTunes
http://www.apple.com/ca/support/itunes/contact/

Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwards?

Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwards?

Just follow the directions here:
http://support.apple.com/kb/HT5661
That's all you have to do.

Repeating the message 'Did you forget your password? "message. Help

When I try to login to the iTunes store or check my account I get the error message:
*Did you forget your password? Your password was incorrectly entered numerous times and for your protection, you will need to retrieve it before continuing to use the iTunes store'*
Of course I have followed the link, re-set my password, tried to log in and I get the message again - and again - and again
the iphone works normally.
any ideas?

as you suspected, when you click on that "Did you forget your password" link on your local install, you're supposed to be taken to the screen where you can have your password reset to a system-generated value. after resetting the password, an email is then sent to the email address associated with that users record. having said this, can you let me know the URL to which that link is directing you on your local install (sending it to [email protected] would be great)? it sounds as if it's not pointing to the right place...for some reason. to be thorough, could you maybe include the url of the screen you're coming from as well? maybe there'll be a clue there as to what might be causing your issue.
thanks,
raj

Did you ship your products to Europe, Montenegro?

Hi,
My name is Sokol, I'm from Montenegro Europe.
I want to bay some products on your store, because in my country you "Apple" dont have a store I have no idea where to bay a MacBook Pro.
My question is, Did you ship your products to Montenegro?
thank you...

Apple does not ship outside the US from the US store. See this page http://www.apple.com/retail/storelist/ and go to the list of countries in Europe. Apple treats all member staes of the EU as one country so should be able to ship to you from a neighboring store.

What did you replace your wireless mighty mouse with?

I am not happy with mine. What mouse did you replace yours with?

I've got an MX1000, I'll agree that it's quite nice. You may want to look around at Logitech's line. The MX1000 uses RF instead of bluetooth to transmit, though Logitech does offer a line of bluetooth mice. However, I've found that the bluetooth mice tend to be overpriced and lacking some features of their RF counterparts.
Currently, the top of the line Logitech cordless mouse is called the G7. It works much like the MX1000 (with a laser instead of LED) but runs at a higher DPS. It also includes two battery packs with an external charger so that you can use the mouse while charging a battery pack. I'm not sure of the price for the G7, but you should be able to find a MX1000 for $40-$50 US.

Professionals, how did you get your start?

I know there are many people on here who earn a living working as professionals. I was just curious, how did you get your start?
I plan to attend Ohio University this fall to major in video production within the Scripps School of Communication. OU is well known for their school of communication, but obviously just having a good name behind your major doesn't guarantee a job.
What did you do to make yourself more marketable to potential employers? Any other advice that you have to share?
Thanks in advance
D

I started out as an apprentice editor on a feature film. Got the job mainly because I fixed the director's assistant's computer during my interview. Knowing how to use the Avid (thanks to film school) helped too.
I started at the bottom, and worked my way up. Gaining knowledge as I went. Apprentice editor, to tape vault manager, to post coordinator, to assistant editor, to online editor, back to assistant, then to editor. 6 years from the day I started apprenticing until the day I started editing a broadcast show.
>What did you do to make yourself more marketable to potential employers?
Learned the ins and outs of the edit systems. I could troubleshoot them if they were broken, and knew the workflows for multiple shooting formats. Was able to make the decision on edit systems to use and workflows to employ when presented with the shooting format, and delivery specs. I learned all that from on the job training, and trolling the web for resources. And a lot of work on my own.
>Any other advice that you have to share?
Work your @$$ off! If you think the job is below you, and act that way, you won't get hired again. Don't think that you will start off right away as an editor, or DP, or director. Starting out as an assistant is a great way to learn all that you need to learn to perform your job. Because right out of film school, you don't know what you don't know. But work hard, be dependable, and you will get hired again and again.

Did you change your home folder name and now your computer is all wierd?

Hello. I did the same thing and I called apple help and they just couldn't help me on this subject. I was messing around with the computer and I found a proper solution where you don't have to re-install the software. Here are the steps:
Step one: login (if your not already logged in) into the account. It should still be there as the original name.
Step two: Open your Finder or HD and select the Users folder.
Step three: You should see your original account name as well as any one else's account name if you have other people sharing the computer. In addition to this you will also see the name you attempted to use as a replacement for your old Home Folder name, note that this is a new unexpected user.
Have it in column mode for the easiest experience.
In the new folder you created (this is the user on the list that you named your original folder) You will find all your old settings. Don't do anything yet! take and highlight all of the content in that folder by holding shift and clicking or your preferred way. Drag ALL the content to your original home folder, which should only have library and Documents. (if it has more than it's okay) it will tell you that there are already folders with that name and will ask permission to replace them. Say yes.
Step four: log out or restart your computer.
Step five: log in, and or wait till it's restarted Your desktop and dock should be restored to the way you originally had it. Don't change the name on it again. if you want to change the name, you'll need to create a new user.
Step six: Thank me and leave me complements or questions.

I think it is rather surprising that the Mac OS allows you to change the name of the home folder and doesn't seem to put up a warning or anything.
I did change the short name used on my home folder about three weeks ago. I used ChangeShortName Utility v1.2 which I got from here:
http://www.macosxpowertools.com
All indications are that using this utility has been 100% successful.
I did create a new temporary account with administration privileges and I ran the utility from that account. This meant I wasn't changing the short name on the account I was actually using.
It is very important to read the "read me" with ChangeShortName so that you are 100% sure of what you are doing when you use it.
Also, of course, back up first

New IE activeX issue: did you charge your clients to make the switch?

Hi all
I am going to update all my sites containing Flash content
and use one of these javascript functions
to generate the embed code, so that Flash plays normally in
IE.
I am wondering if I should notify my clients and charge them
for the change, or if this should be a
"free maintenance" thing.
Did you charge for it? Did you do it free?
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

LMF817 wrote:
> I am at a total loss here...I have no clue how to
implement this fix, it's way
> above my head. The person who developed the flash menus
on my website is not
> available to help me, and I'm pretty much a novice. So
keep that in mind when
> I ask, is there an incredibly simple way to explain how
I can do this?
> Thanks for any help, if there is, lol,
> Lisa
>
as simple as it gets:
First, go there:
http://blog.deconcept.com/swfobject/
click on download
in the downloaded folder, find: swfobject.js
that's the only file you need.
Copy this file to your site folder.
Second, in the head of your web pages that contain Flash,
link to the script:
<script language="JavaScript" type="text/javascript"
src="swfobject.js"></script>
Third, in the same pages, replace any Flash embed code,
typically something like this:
<object classid="clsid
27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0"
width="810" height="570">
<param name="movie" value="movie.swf">
<param name="quality" value="high">
<param name="wmode" value="transparent">
<embed src="movie.swf" quality="high" pluginspage="
http://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash" width="810"
height="570"></embed>
</object>
with this:
<div id="flashcontent"><script
type="text/javascript">
// <![CDATA[
var fo = new FlashObject("movie.swf", "", "305", "269", "6",
"#FFFFFF");
fo.addParam("wmode", "transparent");
fo.write("flashcontent");
// ]]>
</script></div>
Fourth, replace the values with the ones you need for your
particular flash movie, in this line:
var fo = new FlashObject("movie.swf", "", "305", "269", "6",
"#FFFFFF");
movie.swf = path to your swf file
305 = width of the swf
269 = height
6 = targeted flash player version (latest is 8)
#FFFFFF = background color
Last, if this is a drop-down flash menu or any flash content
that might go OVER or UNDER some html
content, you will want to add one parameter:
fo.addParam("wmode", "transparent");
just before
fo.write("flashcontent");
Voil�
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

Where Did You Get Your MacBook?

For those that have a MacBook, where did you purchase it from? Even with the student discount, purchasing from the Apple store doesn't provide any savings because of the taxes (~$84.00 in NY). I know Amazon.com sells it, but it's pre-order.
Mac OS X (10.4.6)
Mac OS X (10.4.6)

No need to get defensive. I wasn't saying that people shouldn't use the Apple Store. I was saying that unless Apple recognises your problems as problems, they will not do anything for you. That is to say, issues such as heat, whine and other common issues people worry about here on this forum will not be addressed by the Apple Store geniuses because they don't consider these problems out of specifications. This also means that if you have these issues and decide you can't live with them,you most probably will not be able to return a macbook of MBP to them without a restocking fee.
Believe me, I was amazed that they were so unwilling to consider not charging me a restocking fee. I was very calm, told them about the issues (whine, heat, loose battery, warped lid) and told them that over the past 15 years as an Apple user I have never felt disappointed with an Apple product except for this one. I told them that I have purchased items for tens of thousands of dollars from Apple over the years and asked them if they would at least consider charging me just half the restocking fee given that these are problems SO MANY people are having. There are OBVIOUSLY issues with the MBPs. The guy (who claimed to be the 'lead' rep there) refused and told me, in the same breath, how much they 'love' my business, pointing me in the direction of the checkout so I could line up to get refund, minus the $200 fee for beta testing. How insulting and disingenuous is that!
There are stores that will accept your claim that an item is defective. Since Apple is the mothership they decide what is within spec while some other stores just trust you when you say your notebook has excessive heat problems or whines and therefore needs to be returned. Given the many problems reported, I would recommend anybody to buy from a store with a more generous and no hassle return policy. Getting an exchange will not help if all units have the same problems....
MBP Mac OS X (10.4.6)

How did you get your first Flex developer job???

Hi guys..
I know it might not be relevant for this forum, but I am dying to know how you guys get your first flex developer job. I am actually more interested in your resume. What sort of skill did you guys put on your resume? Thanks for the reply....:D

Started as a pure "Java/J2EE" dev. Rebelled and added Flex to my skill set (since JSP is sin on par with 'AJAX frameworks'), started new project using Flex.
In other words one way is to take ownership of a Java (or other) project, and force the bast... er, have your project team use Flex. he he
But this is the long path, of course. To start off in Flex (besides the obvious of looking for it by name) you'd probably focus on UI design skills/experience and competing (but crummy and old) front-end technologies, and then lobby for the Flex SDK on any new projects that come along (assuming it's a good fit). I suspect you'd have a tougher time if you're going into an organization which already has some late-generation RIA tech in use, such as Silverlight or GWT (bleh), but the ones still saying "JSP" or "AJAX" and any other associated legacy HTML-type technologies are soft targets.

Why did you return your N97 - fail

Somebody suggested to take this conversation elsewhere. I'm starting this to really help Nokia as to why I returned my N97, and maybe somebody else looking to buy one, it will help them decide its nothing that matters to them.
After reading Nokia's return policy I found that you really only have 7 days to return the phone with the California exception being 30 days but having to pay a 15% restocking fee.
I returned my N97 because of all the hoopla about being the new flag ship phone that was a touch screen phone. When I tried to use the phone for 4 days and the back light would not turn on (This has since been fixed in the latest software update) Knowing I only had 7 days (30 really in my case) I called tech support and they quickly decided to have me send my phone in for repair, they said they had not heard of this problem and it was better to get it in earlier than later. All was so far ok, not great, about 4 days after they received the phone I received a call from the "executive offices of Nokia" telling me they understood I purchased their flag ship phone and they didn't want me to be without a phone, they were going to send me a N71 because the parts for my phone would not be in in 2-3 week. I said ok, and hung up the phone. Then my partner asked if this is a new phone without parts, why not just send you a new phone. I called back and the story changed, now it seemed they didn't know if it was software or hardware. I lost it, and asked for a refund, they said being a new phone they would give me 100% refund and send me out a box that day, and my refund would be mailed out in 6 weeks or more. 1 week later and no box to return the phone in, I called back, Seems they did not send a box out, its going out on Monday, When I said if I didn't get the box by Wednesday I would dispute the charges on my credit card. They also admited that the refund check has already been mailed and if I disputed the charges they would stop payment on the check.
Issue
#1 - Customer support never gave me the same story twice, it kept changing
#2 - I own an iPod touch to listen to music at the gym. The web browser blows the N97 browser away, I don't think Nokia even looked at the iTouch/iPhone to enhance their browser. I found I couldn't use the browser
#3 - Out of the box the phone software was bad, had they waited till July 1st to ship the phone (about 2 weeks) they would have had a phone that seemed to work
#4 - OVI prices on application are too high, why are there not any application for $0.99 everything seems to be $2.99 and up
#5 - Days after the phone release, when the software still didn't work, Nokia lowered the prices for 1 day, Would not give a refund of the difference.
#6 - Memory for the C: default drive is limited, when I send over some ring tones via blue tooth, I filled it up, after reading the forums I found I could set the memory to the 32G partition, Why does a $700 phone cause me to tweek it like that.
These were my major complaints, I figured for $700 (usd) I would get a phone that worked and smoked all the other phones out there.

Hello, you are bit late to the frenzy, but since your post is likely stemming from lots of misinformation that was flying around, here are some sources to get your facts straight:
http://blog.gerv.net/2014/04/your-ire-is-misdirected/
https://medium.com/p/7645a4bf8a2
https://blog.mozilla.org/blog/2014/04/05/faq-on-ceo-resignation/
Brendan Eich was not fired by Mozilla, it was his personal decision to step down. In fact he is still a Mozillian today...
Since this forum is a place primarily for volunteers and fellow Firefox users to provide technical support for Mozilla products and not a general place for discussing policies, I'm also going to close this thread.

Adobe why did you change your SFTP settings?

Adobe have changed their sFTP servers to only allow a certain types of sFTP, many windows apps use "aes128-cbc" or "3des-cbc" to communicate via sFTP, you have shut out a ton of apps with this change I am thinking.
I don't want to use have to use Filezilla or Dreamweaver to do uploading, please allow these connection types.

I just wanted to chime in and say that I may be one of those noobs that would have issues with this (Or something similar to this) I ended up solving my own problem and wanted to post up the results somewhere incase someone else has this issue with connecting to their Business Catalyst site, they might find this helpful:
The issue:
I tried connecting to the BC sFTP via these instructions from Abobe : Business Catalyst Help | Connect to your site using SFTP
The instructions are somewhat inaccurate (At least in my case it did not work) because it tells you to connect with the user name "mydomain.com/[email protected]" ...Obviously replacing their placer info with your own, for example "oranges.com/[email protected]". I did this but it did not work.
The Solution:
I went into my BC dashboard and saw there was another domain type in the style of : "oranges.businesscatalyst.com" it's the one that says "(System)" after it. Notice the addition of ".businesscatalyst" after your domain. So i put this in as the user instead, and voila' I connected.
In the bulleted list that most noobs will gravitate tword as an example of what is correct to apply to their own connection info it does not have that info added to the User Name example. They do mention it in the paragraph below but they state that this is for trial/temporary sites, which my site is NOT. This is the type of thing people who do not know a lot about networking lose hours if not days of their life on trying to figure it out. Can't we make this process a little more easy or at least give people accurate instructions so they are not chasing their tails?
Am i missing something or is the site misguiding people as to how to connect? Maybe my site is just stuck in trial/temp limbo? Adobe, please look into this, thanks.

Unbrick stories?? How did you get your Pod working again?

Have read and read about one bricked Pod after another. Perhaps a thread on unbricking would be helpful. How about responses from those who posted that they had "bricked" their Pods? Any solutions (aside from the obvious - don't upgrade to 1.1). Did anyone discover that a brick was due to something other than the 1.1 update? How are the "dead" Pods being fixed. Obviously there are problems, like the hiss and sound quality issues. But the ultimate problem is bricking. I am just curious as to what people are doing with their Classic Pods to "fix the brick." Any solutions??

Disk Mode lets you 'end' the 'iPod booting' circle (i.e. when your iPod keeps showing the Apple logo, then clicks, and starts the boot cycle again). As soon as the iPod starts this 'boot cycle', press the 'play' and the 'select' buttons at the same time for a couple of seconds.
The screen will turn white and you are now running the iPod in Disk Mode.
You can now connect it back to your iTunes, and from there run another synch, or restore the iPod, using the restore function in iTunes.
I hope this helps.

[Intel] Did you OC your P4 2.8 Northwood/Prescott on 865PE-NEO2-LS? Yes=post here plz!

Similar Messages

Maybe you are looking for