Internet Coneection is down but computers are connected?

I'm having really bad problems with my TC (500gb). We have 2 Macbooks(1 pro, one not) 2 desktop pc's, 2 laptops a nokia E65 and a Wii all connecting to the network.
After contacting apple they told me to try disabling security temorarily and once the devices were connected to re enable the security. This worked for several of the devices and computers but the 2 laptops will not connect to the internet.
They are both running XP, one using an intel pro wireless built in card and one using a belkin board connected through the pcmcia slot.
The laptops connect to the network but will not load any webpages. I have both windows firewalls disabled and any other anti virus software de activated.
I'm lost, it makes no sense. Why would there be no internet connection. Is there some kind of blocker on the TC to allow or disallow a connection by a certain connected device.
I don't know. But maybe some of you guys do.
Thanks for any help
Kilian

Have you tried to change ethernet cables? Check where the ethernet cable from computer is connected. It should be in one of the four LAN ports.

Similar Messages

I just hooked up Internet at my house today and I'm trying to connect to it on my IPhone and IPad but neither are connecting. My grandma's Android phone is connected and is working just fine. Why isn't any of my apple products working?

I just hooked up Internet at my house today and I'm trying to connect to it on my IPhone and IPad but neither are connecting. My grandma's Android phone is connected and is working just fine. Why isn't any of my apple products working?

Since you give no clue as to what make/model/version WiFi router you are using or how you have it configured it's hard to comment.
Look here for some WiFi troubleshooting advice http://www.apple.com/support/ipad/wifi/.

I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How?

I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How to reconfigure.
I ask because I have music running out of both expresses, and the one that is most distant from the time capsule (routed through the first express) regularly drops the music signal from itunes. And I am guessing the serial configuration of the routers has something to do with this, but my root problem is music dropout - any thoughts would be appreciated.

If you have the the most current model of the Express devices, the default setup is to "extend" the wireless signal. In this type of setup, each Express communicates directly to the Time Capsule.
How did you setup the AirPort Express devices?
What version of the Mac operating system are you using on your MacBook? Or, do you have AirPort Utility installed on your iPad?

How do I send files from my IMAC via bluetooth to my ne Ipad. They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipad but the failure message says the ipad does not have the ncessary servr

How do I send files from my IMAC via bluetooth to my new Ipad? They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth, but the failure message says the ipad does not have the necessary services. What are these? Do I neeed to have iphoto and ms word to send pix and .doc files?

File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.

My router can connect to the internet but computers that connect to the router can't.

I have a Wrt54g version 3.0 connected to a Speedstream modem. I also have one wired computer connected to my wrt54g and one wireless laptop. Both my computers can connect to the the router's web interface. When I go to the status tab, the router is able to get a public IP address and under the diagnostics tab I'm able to ping and tracert to www.yahoo.com just fine. But the computers that connect to the wrt54g cannot connect to the public internet. It is really strange. The computers get an IP from DHCP and I'm able to ping the internal gateway but I cannot ping a public IP address from the computers. I've got the latest firmware and have tried to restore to factory default without any sucesss? Any suggestions anyone?

Check the Setup - Advanced Routing page. What you see sounds like you run in "Router Mode" or "NAT disabled". Change to "Gateway Mode" or enable NAT.

HT1918 I need to know what computers are connected specifically to my imatch account it says 5 computers but I think they are using computers that I have sold but I cannot tell where do I find this information?

How do I find the computers that are connected specifically to my imatch account?

Unfortunately, there isn't anywhere you can see a list of authorised computers, you could however de-authorise all your computers and re-authorise just the ones you want to. Note however you can only de-authorise all computers once in each twelve month period.

Internet Security Warning - The Server you are connected to is using security certificate that...

Mail Client on Laptop is Windows Live Mail. Mail server outgoing.yahoo.verizon.net. DSL Internet. Long time Verizon customer. Client configuration settings correct according to Verizon. I now get an Interenet Security Warning message whenever I start up the Live Mail Client and send an e-mail. Only happens on sending e-mails. The warning message comes back looking for a YES or NO answer. The message is
"The server you are connected to is using a security certificate that could not be verified."
"A certificate chain processed, but terminated in a root certificate which is not trused by the trust provider."
"Do you want to continue using the server?" "YES or NO"
I click YES in order to successfully send e-mail messages which I do not like to do. I only have to press YES on the first e-mail message that I send. The rest outgoing e-mail work correctly after that first one.
What has Verizonn done to cause the problem on my client software? I have done nothing to change configurations on my Windows 7 and Windos Live Mail laptop. I have done some research, and verified that my computer time and time zone is correct. I am looking for an explanation on why this is happening from Verizon.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

If no one has a better idea you may want to unlink Yahoo from VZ. http://forums.verizon.com/t5/Verizon-net-Email/Unlinking-Verizon-email-from-Yahoo-portal/td-p/413475 It is possible to lose data as pointed out in the linked thread.
OR Did you get any indication that your mail server settings were going to change at the end of Sept 2013? A mass email went out for "standard" verizon users earlier this year. I am not sure if this effects Yahoo/VZ settings.
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

WRT54G lost connection to Internet from Wired computer, but wireless still connect

I have the router hard wired to a desktop computer and have 2 other computers connecting wirelessly through it. The hard wired computer suddenly could not connect to the internet, yet the 2 wireless computers still can. The computer was 5 yrs. old and I had bought a new one, so thought it was the best time to set it up. I have the same problem with the new computer. The only way I could get access to the internet on it was to run a line from the USB port on the DSL modem directly to the computer. I can still see the 2 other computers and their files through the router, just can't get the router to see the modem from the hard wired computer. The 2 wireless computers can access the modem through the router, but the wired one can't! According to Linksys the problem is with my ethernet/lan on the computer.(both computers?!) According to the repair/diagnose on my lan connection, it says there is a problem with the router or modem. Any suggestions?

I found the problem, the router is bad. I bought a new router and installed it, made no changes to the computer hardware, and the new router worked fine with the ethernet connection for the hard wired computer. I am really disappointed in the help that I received from linksys. They kept insisting there was nothing wrong with the router and that the 2 computers I tried to hard wire to the router both had bad ethernet ports. I will not be buying their products again.

The OEM is showing the instance and listener down but they are up

Hi,
I'm facing one problem with my OEM. On the OS level, I checked that the listener and the instance are running. But when I put the information on the file portlist.ini adding these info on the address http of the OEM, on the browse on the Windows environment, it show me that the instance and the listerner are down.
The instance and the listener are running on one unix machine. no problems to connect using sqlplus.
Any idea about this?
Thanks,
Serg

Sorry the delay Rob,
follow the message that I see on the : Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
Then bellow on the same window open on my browse I see that for OEM the database instance and the listener are down status. On the right side the startup botton is able.
Any idea?
Tks,
Serg

C205 Internet/WIFI is on but won't connect to web.

So, my C205 was working fine yesterday. The computer is mainly used for playing video games and in the recent months had a RAM upgrade. Anyway, I was playing a game on it yesterday and after I stopped playing it, it usually causes my PC to slow down afterwards. So the typical solution for me is to reboot it and it'll be fine. Well. I rebooted it last night and it said the wifi wasn't connected to the internet but it was on.
Okay, that's weird.
I turn it off and go to bed. I wake up about 9 hours later and try it again. Wifi is on but the internet isn't connected. I tried it with local and local doesn't work either.
Tried resetting and disconnecting my router/modem, disabling and reinstall drivers, running a full virus scan (and discovering nothing) and even system restoring but it won't fix the problem.
The Lenovo PC is the only one in my household that has this problem. Every other device with internet and wifi seems to be working but the Lenovo. Is there anything I could do to fix it? The PC will be a year old two days from now. Also, this is the first time it's ever had this problem.
I'd really appreciate some help. Without the internet, the games installed on it will not work and I need this computer for school.

Hi Heosphoros,
Can you try updating by using ThinkVantage System Update? (my support site is not coming up right now, but I will post a link to the update software asap)
*edit* http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-61432
I would try uninstalling the graphics driver and reinstalling it if that update doesn't help.
Did you find a post awesome? A great response? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

No configured Airport Base Stations Have Been found-but we are connected?

Okay,
Here is an odd one...actiontec DSL Modem/Router with Airport Extreme. I applied the update, and was having problems with my external hard drive being recognized, so I reset everything-modem and airport. Now that I have, when I launch the Airport Utility, I get a message that no configured airport base stations have been found. Weird thing is I am connected, transfering files, etc. I just cant access my airport to set up my printer and time machine capsule...any suggestions?

My Mac was working perfectly fine till about a week ago.It would not connect to the internet or anything.I swapped my computer out clean and still nothing so i gave up since I am new to the Mac. The next morning i turned it on and it worked perfectly fine. That night it started disconnecting me from the web every 5-10 mins but the funny thing was it kept saying i was connected to the internet. I have to keep turning off and back on my Wi-fi for it to work right & even doing that does not solve the problem. I went to my time machine to try to system restore my computer to an earlier date and it does not work.The airport utility comes up and says no configured airport base stations have been found.Airport utility will continue searching. I have no clue what Airport Utility even is when i got my computer furnished threw the college I was going threw at the time everything was already set up on it. The Wi-fi connected instantly. I have a MacBook Pro (OSX) with this software OS Lion. I don't have the money to get it professionally fixed so trying fix this issue on my own. Would a factory reset solve the problem?.

I have 1500 bookmarks that were transferred from Internet Explorer as favorites but they are now uncatagorised and unlabeled - how do I delete some of them or put them into groups?

I was using AOL 9 with Internet Explorer and saved 15oo Youtubes as "favorites". I changed to Firefox and upgraded to AOL 10 - my favorites now appear as bookmarks but they aren't arranged in groups (guitar, drums, blues, country, lessons...etc.) and there aren't names to identify them. Do I have to delete all of them and start afresh and if si - how do I delete some of them?

* Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export
* Import the HTML file in Firefox: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
See also:
* http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

I have internet service on iMac but cannot get connection for Blu ray with airport express.

Why am I not getting internet connection for blu ray on tv with airport express?

Which exact model of the AirPort Express do you have?
Did the Blu Ray player connect wirelessly to the Express before or has it never been able to connect to it at all?

My devices are not being found, but all are connected to my WiFi...how can I fix this?

Is there a way to fix my iCloud "Find my Device" feature? All of my devices are conected to my home WiFi and yet, the Find My Device feature says that all of my devices are not connected. How do I fix this?

Hello micoj8
There are a few things you can do and I have highlighted them below. If you want more information, then check out the article below.
iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac
http://support.apple.com/kb/ts4006
"No location available," "Offline," or "Location Services Off" alerts
This can occur if:
The date on your device is incorrect. Choose Settings > General > Date & Time to check and set the date.
Your iOS device is currently off or not connected to a data network (Edge, 3 or 4G, or Wi-Fi). Wait a few minutes and try again.
Your iPad (Wi-Fi only), iPod Touch, or Mac is currently off or not connected to a Wi-Fi network.
Location Services is not enabled on your iPhone, iPad, or iPod Touch (Settings > Privacy) or on your Mac (Date & Time) preferences. Learn more about Location Services on your Mac:
OS X Mountain Lion or later
OS X Lion
You are located in a country where Apple does not offer this feature. This feature may not be available in all countries due to technical limitations or local law.
Regards,
-Norm G.

Post-RSS... no more shut downs but fans are freaking out

Ever since I got my MacBook back from having the heatsink replaced, the fans have been unusually noisy. This morning, after starting my computer from sleep mode, I opened MS Word. Now the fans sound like a little jet engine and they've been running at (what sounds like a) high speed ever since. I closed down all the programs I was running which in the past would make the fans slow down. But this time, the fans have been running for over 45 minutes.
I wonder if this is related to the latest Office update. This is the first time I've opened Word since doing the Office update over the weekend.
Any clues?

Is it ur Macbook obviously hotter than before? Normally if your fan sounds like a jet engine that means ur CPU temp has exceeded the threshold value (the default threshold should be ~70C) so the fan cranks itself up to maximum, which is abnormal if you just got a new heatsink.
1st of all, check ur activity monitor to see if there is any process that's using a lot of CPU power constantly. If yes, just quit that process or uninstall the corresponding program, this should solve the problem. If none, you can download a program called "SMC fanControl":
http://81.169.182.62/~eidac/software/page5/page5.html
This program shows you the current fan speed and the CPU temperature. Run it after you boot into the OSX and then use the computer the way you always do but monitor the temperature and fan speed change in SMC fanControl. The average temp under regular use should not exceed 60C. If the temp climbs up too fast, it's not normal and u should call AppleCare.

Internet Coneection is down but computers are connected?

Similar Messages

Maybe you are looking for