Intrastat - export declaration

HI,
I have one intrastat business scenario: This process involves b/w three  countries:
Step1: Germany sales org. (G100)(Comany code for germany: GA00)create orders from Austria customer.
Step2: Delivery is made from plant 9000(France Plant) (Company code for france: FA00) directly to customers.
Step3: Germany com.code is making a direct billing to Austrian customers
Step4: Therefore there is an intercompany bIiling doc. IV from france com.code to German com.code.
I have done aboove all steps, after i have done the export declaration with germany company code with country declaration DE. In this case system showing doc. in ENGR t.code.
As per client requirement system should not show this document with these combinations.
But client actually requirement is, they want to do the export declaration with france(FA00) com.code with country declaration DE for IV doc. with destination country AT by t-code ENGR
But when i do the declaration with this combination system showing error message: Your selection is based on org.units that are not in the declaration country DE.
Is there any special configuration settings for this in intrastat for traingular business scenario.
This scenario is applicable for spain also.

thanks to all

Similar Messages

  • Intrastat export EDI file

    Hi,
    i need to generate an EDI file in the Intrastat export Declaration for Belgium.
    Anybody knows how i can get the file???.
    Thanks.

    Thanks to all

  • Intrastat export file creation

    Hi All,
    There is an issue for France that is related to intrastat export and import declaration file creation.
    When export file is created in positions 62 to 63 (regime) they need value = 21 and for import file value = 11; I donu2019t know where this should be maintained.
    Any body can help me.
    Is their any special configuration settings for this.

    Thanks to all

  • Credit Memo to Export Declaration

    Hi,
    For returns we use the billing document type of a credit memo, this is posing us a challenge when it's an export return becuase  GTS  programmed in filter logic that credit billing doc types will not get passed to compliance/customs management.
    Specific doc types being filtered are O – Credit Memo, 4 – Credit memo list, 6 – Intercompany credit memo,  S – Credit memo Cancelation.
    Anyone have expereice/guidance on how to integrate? 2 current options being evaluated are enhancing the logic to allow a credit memeo to create an export declaration or introducing the pro-forma.
    Thanks, Jeff

    Hi Jeff,
    Please explain why it would make sense to create an Export Declaration for a return - thanks.
    Regards,
    Dave

  • Customs export declaration not getting created

    Hello everyone .. i need help of your expertise
    I am creating billing document on R/3 and we have made it such that the F2 document flows onto GTS and creates a Customs export declaration
    The issue here is i have created the billing docs but i cannot find them on GTS.
    I checked the value of the goods is not equal to zero
    Checked the SM58 to see of any RFC log is there at the time of document creation and time .
    checked SLg1 on GTS to see if any log , but no log is there .
    It is basically an export order from EU country to a non EU country
    and i checked the billing doc and it is export relevant
    The document is flagged to go into GTS in document control settings on R/3
    Plant , company code and everything is mapped.
    It is an intercompany customer transaction.
    When i try to pull up the CULOEX by using the reference doc # from feeder system its saying no documents found
    in test environment the billing doc is flowing onto GTS and creating CULOEX succesfully.
    The sales order and delivery docs basically passed the compliance test and they are good.
    Can someone suggest me where else i need to go and look at .
    your help is very much appreciated.
    thanks
    Bharad

    Hi Bharad,
    Could you let us know the current status of the issue? If it is resolved could you pls share us how you have done it as it is the most occurring issue and leaves no clue too? If not resolved, Could you check whether the Badi /SAPSLL/IF_EX_CTRL_SD0C_R3 is activated in R/3 or not?
    Regards,
    Shiva

  • Customs Documents for Export Declaration - Output

    Hi ,
    i have created Billing document in R3, in GTS customs docuement generated for that billing doc.
    when  i am Executing the message under Communication View  giving error message "Cannot execute; message P0350 is incomplete"
    Could you please let me know which config i missed out.
    and also when i am check the message message throwing as "Executor/sender has not been maintained in customs document xxxxxxxxx" please let me know where i need to maintain the Sender"
    I want to see print preview on sereen for Certificate of Origin (US) for customs document for export declaration.
    please guide me on this.
    Regards
    Tarun

    Hi,
    You can first identify the incomplete schema assigned to the message (P0350).
    SPRO -> Global Trade Services -> SAP Customs Management -> General Settings -> Communication Processes -> Define Messages for Communications.
    Once you have find the incomplete schema, review the configurations to find which field is missing. From the error message, it might be the processor for the customs document.
    SPRO -> Global Trade Services -> SAP Customs Management -> General Settings -> Document Structure -> Control incompleteness checks in Customs Shipments and Customs Declarations
    Wen

  • Communication process for customs export declarations in ATLAS

    Hi,
    I am looking for notes which is relate to German export declaration process.
    The notes related to 2 message types, one for sending the inspection relate data to the responsible customs office (Neue Nachrichtenart "Beschau") , another message type for sending exit confirmation to customs office when truck leave EU after 70 days (Neue Nachrichtenart beim Follow-up nach 70 Tagen).
    Appreciate your help.
    Regards,
    Lluvia

    Hi Ping, or Lluvia,
    You can search for SAP Notes in the SAP Service Marketplace.
    Regards,
    Dave

  • Custom Export Declaration Form in GTS

    Hi,
    Good day!
    I would to ask for your assistance with regard to the Print Program of standard Smartforms in GTS. 
    Currently, I need to replace the standard Export Declaration Form with a custom form.  I found in SPRO that the current standard form is  /SAPSLL/SF_CH_802AZV.  However, I can't find the the Print Program for this form. 
    Can anyone help me with this? Anyone knows how to find the standard Print Program for the standard Export Declaration Form --- /SAPSLL/SF_CH_802AZV --- in GTS? 
    Thank you very much!
    Best regards.
    Brando

    Hi, Its not really clear what caused the error...
    Did you get an inbound message (I***)  with the error message ( Authorized value 9 ) after sending the M class message ?
    Or was it GTS internal error ? My tip is that you used some value for a field which is not valid in the current code list - maybe check if code lists haven`t changed....
    Anyway, to reprocess message there is a small button on the Communications tab (Declaration header level).

  • New export declaration after cancellation

    Hello,
    I've got the following problem and hopefully someone is possible to find a solution to the problem:
    An export declaration is build by an F2. Afterwards the declaration is cancelled on GTS side manually. The actual status in CUHD field PROST is 4B (cancelled). On refer to the same delivery a new F8 is build to create a new declaration but failed. It cannot be transfered to GTS (SM58 process is allready existing with... ). The previous declaration is successfully cancelled, what might be the problem? Is there any idea?
    Thanks in advance for any help!
    Astrid

    Hi Astrid,
    I took a look at the code...  The check works something like this:
    The system tries to find any existing Customs Documents having the Billing Document as a header reference.
    If any documents are found, they are checked for Status.  Any with status '4B' ("cancelled") are ignored.
    If any documents remain, the item-level references are considered.  If there are any matches, then the new transfer is rejected.  Otherwise, the transfer is allowed.
    I wonder; was the Export Declaration the only document created from the first transfer, or did the system perhaps also create a Transit Shipment?  If so, that too must be cancelled to allow the new transfer.
    Does that help?
    Regards,
    Dave

  • Shippers Export Declaration Form (SED)

    Friends,
    I have to design Shippers export declaration' form using smartforms.
    I was wondering if there's any std form and program available?
    Thanks..

    Hi Sascha,
    I had already mainatained the details as follows -
    Message         P0360  Shipper's Export Declaration (US)
    Legal Reg.      ACE    US Automated Customs Environment (ACE)
    Document Type   CULOEX  Customs Declaration: Export
    Departure Group
    Dest.Group
    Country of Dep. US   USA
    Can you provide any more insights.
    Thank you,
    Sandeep

  • Manual export declaration

    Hi,
    Wondering if its possible to create a complete manual declaration out of GTS without any reference document created in SAP.
    Like entering tarriff code,material numbers and all neccessary details manually within GTS and create an IDOC from there?
    regards
    sabby

    Hi Sabby,
    Currently it is not possible to manually create an export declaration which will also have the "Control" tab available since that information is populated from the Customs Document in the Compliance module.
    However, it is still possible to do what you want.  In the feeder system, you need only create an "LO" delivery type (delivery without reference to sales order).  Configure that delivery type in the GTS plug-in to send transaction and data into GTS to create a customs document.  This also means that materials will need to be maintained in the feeder system.  Use the "NLAG" material type (non-revenue). 
    This method also helps to make the record-keeping compliant with US export laws.
    I realize this is several months after you originally asked the question so I hope this response helps someone.
    Cheers !
    -Greg

  • INTRASTAT Receipt Declaration - RETURNS/CREDIT AND DEBIT MEMOS

    Hi Experts,
    Can someone explain me how(on what basis) the Credit/Debit memos are included/excuded in the Intrastat Receipt declaration. Can you  explain what are all the documents included in Transaction MEIS and in VI99.
    Regards,
    Hemant Kumar B

    The calculation of the invoice value is based on the purchase order history and includes all the subsequent debits/credits (See note 1112153). However, planned delivery costs (table EKBZ) are excluded.

  • Export Declaration Output not determined

    Hi,
    I have setup the action profiles, action definitions and process for the ACE for manual SED (paper based) output.
    Proforma Invoice(F8) get passsed to GTS but no output determined in the communication Tab. I have setip the printer determination for messge type(P0360 - Message Type)
    When I go to Change mode and see the log i see the following information.
    Don't know what I have missed in the config.
    please advice
    Legal regulation ACE, document type CULOEX, process CUSEX
    Default data Messages: procedure COEUS (Messages - Export - U.S.)
    Process: CUSEX; activity sequence: CUSEX; activity: CUSEX
      Active Rule with target field $MESSAGE (Message)
          Access with field combination FC_0001 (Default (always proposed))
              -> Document header
                 -> No default value was determined
          Access with field combination FC_0019 (Fallback Procedure)
              -> Document header
                 -> Source field H_EMCAS (Document Is in Fallback Procedure) has the value:
                 -> No default value was determined
          Access with field combination FC_0020 (Activity Sequence/Fallback Procedure)
            -> Document header
                 -> Source field H_PROCS (Process Template) has the value: CUSUS
                 -> Source field H_PROSS (Process) has the value: CUSEX
                 -> Source field H_EMCAS (Document Is in Fallback Procedure) has the value:
                 -> Source field H_PROAF (Activity Sequence) has the value: CUSEX
                 -> No default value was determined
    Edited by: Sandeep Vibhute on Nov 25, 2008 5:21 AM

    Hi Sascha,
    I had already mainatained the details as follows -
    Message         P0360  Shipper's Export Declaration (US)
    Legal Reg.      ACE    US Automated Customs Environment (ACE)
    Document Type   CULOEX  Customs Declaration: Export
    Departure Group
    Dest.Group
    Country of Dep. US   USA
    Can you provide any more insights.
    Thank you,
    Sandeep

  • Intrastat - Traingular business process - Export declaration

    HI,
    We have one business scenario in intrastat for traingular business process.
    So we have three EU countries involved. End customer country is Austria, order received plant country is germany and delivering plant country is France.
    But when they do the intrastat declaration, they want to do the declaration with DE(Germany country) for this movement even though the goods physically moved from FR.
    I have tried, it is not working. when i do the declaration system is allowing to do with FR only not with DE.
    What are special configuration for doing this declaration.
    Any hint leading to a resolution is highly appreciated
    With regards
    Lakki

    I got the solution

  • Intrastat problem - export declaration

    HI,
    We have one business scenario in intrastat for traingular business process.
    So we have three EU countries involved. End customer country is Austria, order received plant country is germany and delivering plant country is France.
    But when they do the intrastat declaration, they want to do the declaration with France company code with germany country as declaration country for this movement even though the goods physically moved from country FR.
    I have tried, it is not working. when i do the declaration system is allowing to do with DE with germany company code not with France company code.
    What are special configuration for doing this declaration.
    Any hint leading to a resolution is highly appreciated

    Hello,
    could you please let me know , how did you resolve the issue.
    I also have a similar issue.
    Thanks & Regards,
    Rajeshwari

Maybe you are looking for