Invalid address alignment

I have a C++ application built with Roguewave and Visibroker on Sunsolaris. The server crashes for cerain type of inputs with 'invalid address alignment' errors. I used insure++ to build the application. Though insure++ shows some scope for memory leaks, at the time of input it does not show any specific leak. What should I do.

Hi,
If you try to get sqlerrm, and sqlerrcode, probably you will be able to solve this issue. I feel that this is something to do with C code not with Oracle. You may want to check the variables data types declared in the program and existing types in database. Good luck.

Similar Messages

Invalid Address Alignment-64bit

Hi All,
Well, I am porting a multi-threaded application from 32-bit to 64-bit for Solaris 2.8. Its core dumps at a MALLOC statement , showing
Signal 10 SIGBUS sigcode 1 ADRALN sigsender 0 The dbx command window shows
signal BUS "invalid address alignment" in t_splay.
the stack is as follows....
D__wkr_create(wkrPP = 0xffffffff7c30b658, attrP =0xffffffff7c30b408)
malloc(0x118, 0x0, 0x2, 0x1000275a4, 0x81010100,
0x0)
mallocunlocked(0x118, 0x0, 0xffffffff7e3b0ef8,
0x120, 0xffffffff7f71fb08, 0x0)
cleanfree(0x0, 0xffffffff7e3bd4f8,
0xffffffff7e3b0ef8, 0x0, 0xffffffff7e3bd4f0, 0xffffffff7e3bd5f0)
realfree(0x100166970, 0xffffffff7e3bd608,
0x1001668d0, 0xffffffff7e3b0ef8, 0x1001668c0, 0xb1)
t_delete(0x0, 0x100166980, 0xffffffff7e3b0ef8, 0xb0,
0x5b75e1c, 0x0)
t_splay(0x201000200000000, 0x1001669a0, 0x10013a758, 0x100166980, 0x0, 0x0)
Can anyone tell me what the reason for this error ?? Genrally in what conditions does one get this ?? Any Solutions for this....
Thanking You for the needful.
SarathKumar T.

When you get a crash inside malloc, it is usually because a bad pointer was
passed to the free() routine.
free() usually keeps all the pointers passed in until the next malloc()
then it merges all the recently free'd blocks into the tree, before allocating
the new memory block.
Because of that algorithm, errors in calling free() often show up crash
when calling malloc().
You can try using the "check" command in dbx to check your malloc and free
calls. You can read the online help topics for `help check' or `help rtc'
(from inside the dbx command shell)

Core Dump: Invalid address alignment in malloc

Dear All,
I got this problem for my applications and I have no clue on why this happend. Below trace output in core.
Any idea on what's wrong.
Regards
Richard
dbx: warning: writable memory segment 0xfe190000[8192] of size 0 in core
dbx: warning: writable memory segment 0xfe1a0000[8192] of size 0 in core
core file header read successfully
detected a multithreaded program
t@12 (l@1) terminated by signal BUS (invalid address alignment)
dbx: warning: can't find file "/export/home/cefbuild/cef-build-41/cfclib/src/cfcfw/cfcmain.o"
(dbx) where
current thread: t@12
=>[1] _smalloc(0x20, 0xfeb3a208, 0xc, 0x0, 0x0, 0xfeb338f0), at 0xfeac5500
[2] malloc(0x1f, 0x146e4, 0x0, 0x1, 0x8, 0x0), at 0xfeac553c
[3] operator new(0x1f, 0xff348358, 0xff333d5c, 0x441d58, 0x73, 0x48df9c), at 0xff333c9c
[4] std::allocator<char>::allocate(0xfca07763, 0x1f, 0x0, 0x54, 0x81010100, 0x4bb190), at 0x120424
[5] std::allocator_interface<CFCStrAlloc,char>::allocate(0xfca07763, 0x1f, 0x0, 0xfca07c20, 0x10, 0x0), at 0x1202fc
[6] std::basic_string<char,std::char_traits<char>,CFCStrAlloc>::__getRep(0xfca07af4, 0x11, 0x11, 0x7efefeff, 0x81010100, 0xff00), at 0x11ff30
[7] std::basic_string<char,std::char_traits<char>,CFCStrAlloc>::replace(0xfca07af4, 0xe, 0x2, 0xfca07b20, 0x3, 0x0), at 0x108e30
[8] std::basic_string<char,std::char_traits<char>,CFCStrAlloc>::replace(0xfca07af4, 0xe, 0x2, 0xfca07b20, 0x11, 0x0), at 0xff1d2748
[9] CFCTime::Format(0xfca07d9c, 0xfca08dc0, 0xfca07dac, 0x0, 0x0, 0xfeb338f0), at 0xff1d0a04
[10] CFCDpField::ArchiveTimeTo(0xfca08d80, 0x52e319, 0x387, 0x4, 0x64, 0x52e2e4), at 0xff0d06f4
[11] CFCDpField::ArchiveTo(0xfca08d80, 0x52e317, 0x389, 0x441d58, 0x81010100, 0xfeb338f0), at 0xff0cde14

Sorry for the formatting in the previous message. Below proper output from dbx.
<pre>
(dbx) where
current thread: t@12
=>[1] _smalloc(0x20, 0xfeb3a208, 0xc, 0x0, 0x0, 0xfeb338f0), at 0xfeac5500
[2] malloc(0x1f, 0x146e4, 0x0, 0x1, 0x8, 0x0), at 0xfeac553c
[3] operator new(0x1f, 0xff348358, 0xff333d5c, 0x441d58, 0x73, 0x48df9c), at 0xff333c9c
[4] std::allocator<char>::allocate(0xfca07763, 0x1f, 0x0, 0x54, 0x81010100, 0x4bb190), at 0x120424
[5] std::allocator_interface<CFCStrAlloc,char>::allocate(0xfca07763, 0x1f, 0x0, 0xfca07c20, 0x10, 0x0), at 0x1202fc
[6] std::basic_string<char,std::char_traits<char>,CFCStrAlloc>::__getRep(0xfca07af4, 0x11, 0x11, 0x7efefeff, 0x81010100, 0xff00), at 0x11ff30
[7] std::basic_string<char,std::char_traits<char>,CFCStrAlloc>::replace(0xfca07af4, 0xe, 0x2, 0xfca07b20, 0x3, 0x0), at 0x108e30
[8] std::basic_string<char,std::char_traits<char>,CFCStrAlloc>::replace(0xfca07af4, 0xe, 0x2, 0xfca07b20, 0x11, 0x0), at 0xff1d2748
[9] CFCTime::Format(0xfca07d9c, 0xfca08dc0, 0xfca07dac, 0x0, 0x0, 0xfeb338f0), at 0xff1d0a04
[10] CFCDpField::ArchiveTimeTo(0xfca08d80, 0x52e319, 0x387, 0x4, 0x64, 0x52e2e4), at 0xff0d06f4
[11] CFCDpField::ArchiveTo(0xfca08d80, 0x52e317, 0x389, 0x441d58, 0x81010100, 0xfeb338f0), at 0xff0cde14
</pre>

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

I keep getting an invalid address when trying to purchase songs. All the information is correct - it just send me in a circle

I keep getting an invalid address when trying to purchase songs on itune. All the information entered is correct. I have tried on my iPhone, iPad, iTouch and on itunes.

THE FIX: your credit card address AND spelling of your name must match iTunes.
Please don't google or read other blog entries on the Internet telling you to use a restaurant address or those that are telling you apple is doing address validation. They are all written by 17 year olds who pick up the first thing and re-post. Why do people try to "help" by authoritatively posting an answer? The mass of them are ruining my google searches. :-)
Apple is now validating whatever ASCII that you told your credit card company. It's not just address validation.
Name AND address must match.
Then it worked for me.

We are new IPad users and can't access games. The message is invalid address

We are new users trying to access games. We are getting an error about an invalid address or no address or something similar. Can someone tell us how to get into the games.

You can't access what games? Where can you not access these games. Where are you seeing this error message? What exactly does it say?
We aren't mind readers here so until you actually provide some specifics as to exactly what you're talking about, nobody could even begin to offer a suggestion.

When I try to update any applications I get the message, "invalid address" ad when I try to sign in it wont let me.

I can't update any apps or install any new ones. I have a balance over $30.00 and it won't let me buy anything. What do I do to make it work?

Some other users have been having the some problem over the past few days. This discussion my help:
"Invalid Address Tap Continue to sign...: Apple Support Communities

501 5.1.3 Invalid address

an internal application server relays mail mail via our 3 HTS. In Application logs of the app server I notice this app servers fails to connec to mail servers. I look at the 3 HT servers logs and on 2 of the HT server Smtp
receive Logs I notice this....
HT Server \Internal Relay,08D22E6F6002FF0B,ip of HTserver:25,IP of App server50677,>,250 2.1.0 Sender OK,
HT Server \Internal Relay,08D22E6F6002FF0B,ip of HTserver:25,IP of APP Server :50677,<,RCPT TO:USERNAME,
HT Server \Internal Relay,08D22E6F6002FF0B,ip of HTserver:25,IP of APP Server,:50677,>,501 5.1.3 Invalid address
Any idea I came across this article but just wanted a second opinion ...
http://msexchangetips.blogspot.ca/2010/10/exchange-2007-501-513-invalid-address.html
The default domain value is empty when I run the following on my HTServers:
Get-ReceiveConnector -identity <Internal Relay> |fl
thank u
PS: It could also be possible that the application server does not have the complete recipient information or not have nothing at all????? i will look into dat aswell.

Hi WidPacket,
Thank you for your question.
If message flow is well for other users, we could make sure we have configured receive connector for application server, then we could make sure email address of application server was configured with correct format. If the application server has cache,
we could delete cache to check if the issue persist.
If the issue persist, we could contact third application server.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Exchange 2013 - Outlook 2010 - 550 5.1.0 RESOLVER.ADR.InvalidInSmtp; encapsulated INVALID address inside an SMTP address

Hello,
I have issue when sending email to some addresses. Server respond with:
Remote Server returned '550 5.1.0 RESOLVER.ADR.InvalidInSmtp; encapsulated INVALID address inside an SMTP address (IMCEAINVALID-)'
My enviroment: Exchange 2013, Outlook 2010 - no cached mode. Issue happend with two email addresses but not always.
Any suggestion, how to resolve issue?
Thx.

Hi Tomas,
Does this issue occur in OWA? How is the impact, only one user or all users?
Please try to run Outlook under safe mode to avoid add-ins and AVs.
If there is any 3rd party add-ins, please try to disable them for testing.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

Error ITMS-9000: Invalid Segment Alignment

Hello everyone,
This is my first time submitting an app to the app store. I've done ad-hoc distribution before, but my client needs this app on close to a thousand of their iPads, and they have corporate offices everywhere, so B2B is the way I have to go.
Everything is built and tested and works fine. Certificates and Provisioning Profiles are all fine. I am at the last possible step and when I go to submit the .ipa file in Application Loader 3.0, I can't shake this message...
ERROR ITMS-9000: "Invalid Segment Alignment. This app does not have the proper segment alignment and should be rebuilt with the latest version of Xcode. Please contact Developer Technical Support if you need further assistance."
Here's the details...
The app was built in Adobe Flash CC 2014 using AIR for IOS 14.0. I used my PC for the actual building/publishing of the app and then transferred the .ipa file to my Macbook when I tested it and everything was finalized by the client. Application loader will not let me deliver the app to iTunes connect for submission. I keep getting this error.
I've tried everything I can think of. I've installed Flash CC on my Macbook and tried publishing again. All the Certificates and Provisioning Profiles were made and downloaded on the Macbook. I've tried submitting .ipas that were published in AIR for IOS 14.0 and 13.0. I've tried uninstalling xCode 6 and Application Loader 3 and using older versions. So far, nothing has worked.
Has this happened to anyone else? I'm really in a jam here. My client needs their app and I can't fix this last issue. It's very difficult because Adobe Customer Support says that the problem is Apple's Application Loader since the app works fine and distributes without problem ad-hoc. Apple Customer Support says they can't help either, since the app was built in a 3rd party software and not in xCode. If anyone can point me in the right direction, that would be amazing.
Thanks,
Lee

There's a huge issue with this on Adobe's developer forums.
This issue is happening to people everywhere, and it's only been happening for about 20 days or so. Before that Flash CC apps uploaded fine.
There is a successful workaround to the problem that a couple of guys came up with, but it's all terminal coding kind of stuff, and that's miles beyond my comprehension. That kind of coding is way past me, which is why I built it using Flash to begin with, because Action Script is simple. It would take me longer to figure out the work around that it did for me to build the app itself. lol
Any other ideas???

Solution to ERROR ITMS-9000: "Invalid Segment Alignment."

I was using Flex 4.13 SDK and AIR 14 SDK. When I build a release version of my iOS app for the iTunes App Store, I received the following error.
ERROR ITMS-9000: "Invalid Segment Alignment. This app does not have proper segment alignment and should be rebuild with the latest version of Xcode. Please contact Developer Technical Support if you need further assistance."
To resolve this problem I had to install the Apache Flex SDK with Flex SDK 4.13 and AIR SDK 15.0.302. I installed the FlexSDK and AIR SDK with the Apache Flex installation binary.
For many of you, this should be enough to rebuild and run your application. However, after I built an ad-hoc version of my iOS app, and transferred it to my iPhone 4 (iOS 8.0.2) and iPad 2 (iOS 8.1), the app crashed immediately after launch.
If I rebuilt my App in debug mode (-debug-interpreter), it ran correctly.
However, I found a reference on an Adobe message board to a command line parameter, useLegacyAOT, which indicated that the poster had some success with this command line option after his app crashed.
I added the option, -useLegacyAOT yes to the build environment.
This option tells the compiler to disable fast packaging. However, the new linker in AIR 15.0.302 still aligns segments correctly.
Don't do this unless you have to. But this seemed to work for me, and I was able to submit my iOS App to the iTunes App Store.

I'm about send application built by Adobe Flash CS6 with AIR SDK 15 for iOS but got error too:
Error ITMS-9000: "Invalid Bundle. The bundle at 'XX.app' does not contain a bundle executable
anyone know how solve this issue??

"invalid address"--solution from Apple support that worked for me

I have been among the throng who have been frustrated for the past couple of days by not being able to get even free Apps and songs from the iTunes store,let alone purchase anything,since all attempts at downloading/purchasing or even updating Apps on the iPad are met with a message "invalid address" and a link to update billing info in the store. I have called AppleCare once, and have been in an email correspondence with an iTunes support rep since May 10. After assuring her that this was not a personal credit card problem, she started to work this with me as a system problem.
First she had me correct my billing info to include Zip+4 zip codes instead of the 5 digit zip code I had entered. She had me contact the issuer of my credit card to be sure they were using zip+4 (they were not). I corrected the address by phone with the credit card company and then corrected it in my iTunes billing account,but I still was not able to get anything from the store since all attempts were met with an "invalid address" message loop.
At that point I emailed the support rep back to report no joy with her zip code+4 fix.
I changed my city name to all caps, changed my payor source to none and was able to download a free song, so I knew progress was possible,but still could not buy anything with a credit card or PayPal, both of which had had address corrections to the zip codes.
Then I got this email fix from Apple support:
"Please look over your address in the following link:
http://zip4.usps.com/zip4/
Then we will make sure that address matches in the Apple Store and iTunes. I'll walk you through this process to get you back up and running in no time.
1) Visit the My Apple ID website at:
http://appleid.apple.com
2) If the site is not displayed in your preferred language, click the Change Language link in the upper-right corner, type the name of your language in the field that appears, then click the Save button.
3) Click the "Manage your account" link.
4) Type your iTunes Store account name (which is your Apple ID) in the Apple ID field, type your password in the password field, then click the Sign In button.
5) Click "Addresses" in the column on the left. If you have multiple shipping addresses, remove any out-of-date or duplicate addresses by clicking Delete. Also, make sure the state or province field is filled out correctly for each address. To edit an address, click Edit. Edit all of your shipping addresses and make sure the appropriate state is selected in the State drop-down menus.
6) Now click "Phone Numbers" on the left. The area codes should be in the area code fields and the phone numbers should be in the phone number fields. If an area code is missing, or if it is in a phone number field, your account information may not save properly.
7) Make any other necessary corrections, then click the Save Changes button.
8) Click Log out in the upper-right corner.
When you make your next purchase on the iTunes Store, you will be asked to review your billing information. At this point, you can change your information or simply click Done at the bottom of the screen to proceed. Once you click Done, you should be able to purchase on the iTunes Store ..."
I followed this to the letter--my address was correct in the USPS zip4 site,although they use all caps for everything and I did not capitalize the street name.
When I logged into the Apple ID site I found they had 1 addresses,one perfectly correct per USPS and another with obvious errors in the street address.
I deleted the erroneous one,saved the correct one and logged out.
When I went back to the iTunes store I was able to purchase and download an App for my iPad using my original credit card.
So making sure my address matched the USPS database, then checking the address in the Apple ID site,then going back to the iTunes store worked for me.
YMMV--I am posting this because several people indicated they had not even had a (useful) reply from Apple support.
Caroline
iOS 4.3.3

I am having the same issue....Same address for years - same as USPS - I tried 5 times (3 macs and 2 iPhones) and now i have 5 CHARGES for 1.00 each on my credit card. I took the credit card info off so they don't charge me anymore. How can they charge me yet still not allow me to download free updates and say I have an invalid address? I'm sure I will spend weeks or months trying to get a credit out of these incompetent idiots.

Trying to purchase app and get " invalid address" message

when I try to purchase apps I get a "invalid address" message... anyone have an answer?

Restart your iPhone. Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If that doesn't help, launch iTunes on your computer.
From the menu bar click Store / View My Account then click: Edit Payment Information.
Make sure your billing address, the security code, and the expiration date, are all correct then click Done.

Invalid address warning when send email

hi,
I get "Invalid Address" warning when I send email, I do not use Internet email address format, e.g [email protected], I use my Lotus address format, e.g. CN=abc/OU=abc/O=COM, it will have warning in iphone, may I ask how to disable this email address checking feature in iphone?
Thanks

There is no way that I know of to disable the warning. All email addresses have an "@" format equivalent; see if you can use it. (Even Lotus Notes server knows it).

After upgrading to iOS8 my Exchange account has changed to an invalid address. I can change it but after a day or two it changes back to the invalid address. any help on this would be great.

after upgrading to iOS8 my Exchange account has changed to an invalid address. I can change it but after a day or two it changes back to the invalid address. any help on this would be great. Other user on our exchange server that have iOS 7 or lower do not have this problem. All iOS 8 users in our company have this problem

have you deleted the account and re-added it? Have you done a reset or restore as outlined in the iPhone user guide? What troubleshooting have you done?

Invalid address alignment

Similar Messages

Maybe you are looking for