Invalid compressed data--crc error (RHEL ES 3.0)

Hi,
i have downloaded from the Oracle Server these archive: ship.db.lnx32.cpio.gz
in order to install Oracle Database 10g Release 1 (10.1.0.3) on a Red Hat Enterprise Linux (ES) 3.0 server, but when i tried to uncompress (with gunzip) the archive ship.db.lnx32.cpio.gz, i receive these error: "invalid compressed data--crc error".
so, please can you tell me what is the problem exactly. because, i have downloaded four times !!! but the problem didn't change.
Thanks

This is what I got when I ran cksum:
$ chsum ship.db.lnx32.cpio.gz
405751305 649170233 ship.db.lnx32.cpio.gz
as you can see it does not equal 1778052285, so does that mean I have to dl keep downloading the file till i get the correct cksum?
This is just a dev system so it has only 32MB, is that a problem? Do I have to have 256MB?
Thanks.

Similar Messages

Gunzip: ship_mac_client.cpio.gz: invalid compressed data--crc error

I have now downloaded 10g Mac client 3 times from here:
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/macsoft.html
Oracle Database 10g Client Release 1 (10.1.0.3) for Apple Mac OS X
ship_mac_client.cpio.gz (344,013,902 bytes) (cksum - 3052329470)
The file size is correct but I get this error:
gunzip: ship_mac_client.cpio.gz: invalid compressed data--crc error
am i doing something wrong or is the file corrupt on the server?

File size does not provide a reliable means for detecting file corruption. Verify the downloaded file's checksum by running:
cksum <filename>If this value differs from the cksum value appearing on the download page (3052329470), then your file cannot match Oracle's. If the values match, then your file almost certainly matches Oracle's. Matching cksum values does not rule out the possibility of your having successfully downloaded a corrupt file from Oracle. (In other words, their cksum value was computed against a corrupt file.)
Hope this helps,
Eric Adamson
Lansing, Michigan

Invalid compressed data -- crc error

Good Morning every one,
Has some one ran into the same error before? I have downloaded Oracle 9i database software from the Archive location, and I get the above error. I have seen a lot of people have gone through the same issue . I was wondering if I could get some feed back from some one as to an alternative of getting the software, since it is archived.
thanks
Kavin

Hi, I have downloaded Oracle 9i database software also and i got a CRC error on DISK2.
Can OTN Team provide a CRC Checksum for all downloads?
Thanks
Hatim

Gunzip crc error

Hi all,
i downloaded the "Oracle9iAS Enterprise Edition for Linux" from http://otn.oracle.com/software/products/ias/htdocs/linuxsoft.html but i cannot gunzip the 4th file.
# du -b linux_iasv90201_Disk4.cpio.gz
32258630 linux_iasv90201_Disk4.cpio.gz (okay)
# gunzip linux_iasv90201_Disk4.cpio.gz
gunzip: linux_iasv90201_Disk4.cpio.gz: invalid compressed data--crc error
Could somebody verify this?
Thanks,
Andre'

Check out the following post where there is some helpful information down the page: download 9i Linux files
OTN

Gunzip of ALL Oracle .gz files for linux gives crc error

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name - http://download.oracle.com/otn/linux/oracle9i/9201 and http://download.roacle.com/otn/linux/ias/9ias/902
- Filename - lnx_920_disk1.cpio.gz to pick one. lnx_920_disk[123].cpio.gz, lnx_iasv20_disk[1234].cpio.gz, Oracle9iAS_Rel2_Interop_Patch_Linux.cpio.gz, and 9iAS_902_Integration_LINUX.cpio.gz to be complete
- Date/Time - multple times - last attempt evening of 7/5/02 and morning of 7/6/02
- Browser + Version - Mozilla 0.9.2.1
- O/S + Version - Fresh install of Red Hat 7.2
- Error Msg - gunzip: lnx_920_disk1.cpio.gz: invalid compressed data--crc error, gunzip: lnx_920_disk1.cpio.gz: invalid compressed data--length error
gunzip continues to fail with "crc error" even after downloading all the files multiple times. Each time the size is correct to the other downloads and the the size stated on the web site. No error was received during the download process. The problem appears to be with the file on the server. I realize that Linux is not a big market for Oracle, but some assistance in trying to fix this would be appreciated.
Problems also exist with 9.0.2iDS_LINUX.cpio
cpio -icd < 9.0.2iDS_Linux.cpio results in cpio: premature end of file
The .zip, .jar, and .sh files are fine.
Thank you,
Jeremy

Kyle, try testing to see what type of files they really are. eg. file <file name>. I had a similar problem, it turns out that they are cpio format not gzip. You should be able to extract the cpio archive using "cpio -idmvI /mnt/cdrom/Linux9i_Disk1.cpio.gz"
Good Luck

CRC error when uncompress the gtz file

I downloaded the 9 files of Oracle 8i for Linux, then concated
them together. But everytime when I tried to gunzip it or tar
it, I got this Incorrect Compressed Data - CRC Error. I thought
the problem was with the downloading, so I downloaded the files
again, but the problem still occurs.
Anybody knows how to fix this problem?
Thanks a lot
null

Chun (guest) wrote:
: I downloaded the 9 files of Oracle 8i for Linux, then concated
: them together. But everytime when I tried to gunzip it or tar
: it, I got this Incorrect Compressed Data - CRC Error. I
thought
: the problem was with the downloading, so I downloaded the
files
: again, but the problem still occurs.
: Anybody knows how to fix this problem?
: Thanks a lot
There is no way but download the files again.
As far as I know, you do that again.
null

INPUT: KT4/V vs CRC error in large data transfer/CD burning HERE!

This issue can be solved with BIOS update. KT4V & KT4 Ultra users who are having this problem can request for the TEST BIOS to test on your system. You may either pm/email me or Bas, or get it at http://ftp://ftp.heppen.be/MSI/
Please report back whether the test BIOS would really fix the problem, or cause any new problem, or any performance hit.
** this sounds like a Christmas Gift to KT4V users AND New Year Gift to KT4 Ultra users!!! :D **
To all KT4 Ultra and KT4V users, either you have data corruption or CRC error in large data transfer and CD burning or not, your inputs are needed.
Please list down your system specs as details as possible. Below here is a guideline, you may take this, CTRL-C (copy) and write your specs in your post.
1. System specs:
CPU:
Motherboard:
RAM Slot-1: (exact brand and model)
RAM Slot-2:
RAM Slot-3:
display card: [no overclock]
IDE-1M: (exact HDD brand and model pls)
IDE-1S:
IDE-2M:
IDE-2S:
IDE-3:
SER-1:
SER-2:
PCI-1:
PCI-2:
PCI-3:
PCI-4:
PCI-5:
PCI-6:
PSU: (brand, model, total power, (estimated) combined power)
BIOS revision:
Operating System:
VIA 4-in-1 drivers : (if you installed it, tell us the version)
other drivers, services or applications might affect the data transfer such as : PCI Latency patch, WPCREDIT modifications, VCool, CoolerXP...
2. CRC ERROR?
PASS or FAIL
If PASS, let us know your BIOS settings.
If FAIL, proceed as below:
3. Please use these BIOS settings:
1. Load BIOS Setup Default
2. NO OVERCLOCK ON FSB! Set accordingly to your CPU
2. Set RAM to
a) SPD, if failed try
b) User defined to the slowest RAM timings, ie 266,2.5,3,6,3,disable interleave,4,disable 1T, normal
If PASS, go for more extreme BIOS settings as you usually use:
1. High Performance Default
2. set RAM to the extreme timings
3. DO NOT overclock yet until both 1. and 2. are PASS
4. Try these suggestions:
1. Microsoft IDE drivers (uninstall VIA 4-in-1's)
2. VIA 4-in-1 different version's IDE filter driver?
3. VIA IDE Miniport driver?
4. use IDE-3 RAID channel for one HDD data transfer
5. same HDD transfer, ie C:\dir1\*.* -> C:\dir2\*.*
6. burn CD at 1x speed
7. Set the HDD and/or CD to PIO mode, or slower UDMA mode.
8. If and only if you know how to update BIOS correctly and willing to take some risks, try the BETA BIOS KT4 (1.25), KT4V (1.64) too.
Please report back your tests and experimentations of these suggestions.
If you have any workaround to deal with this issue other than set back FSB to 100Mhz, please tell us too.
Thanks for your inputs!

My system, just gotten this 2 days ago
CPU: Athlon XP 2000+
Motherboard: MSI KT4V (MS-6712)
RAM Slot-1:
RAM Slot-2: 512 Mb Kingston DDR 333 CAS 2.5
RAM Slot-3:
display card: Abit Siluro GF3 Ti200
IDE-1M: Western Digital WD800JB (8 Mb Cache) - 80 GB
IDE-1S: Seagate U-Series ST360020A - 60 GB
IDE-2M: Sony DVD-ROM 16x (DDU1621)
IDE-2S: Creative CDRW121032
IDE-3:
SER-1:
SER-2:
PCI-1:
PCI-2:
PCI-3: Accton 1207F 10/100 Fast Ethernet Card
PCI-4: SBLIVE 5.1 Platinum with Live!Drive II
PCI-5:
PCI-6:
PSU: 400Watts (Generic)
BIOS revision: 1.6
Operating System: Windows 2000 with SP3
VIA 4-in-1 drivers : Hyperion 4.45, only AGP and INF installed. IDE drivers are standard Win2k/SP3 ones.
2. CRC ERROR?
FAIL.
When i had my system, i tried installing Windows ME as i wanted to do dual-booting together with Win2K. When i tried to install NVIDIA Detonator drivers (Ver 30.82), it proceeded as normally and asked for a reboot, which i did, then it just hang before the start of Windows ME. I did a reboot, and later selected "Normal" as Windows ME detected a failed startup, and later i was able to enter Windows ME, but it reported that the NVIDIA Detonator drivers were invalid and of wrong type to my display card.
Later i tried to move my files from my C:\ to D:\ and it reported saying that my destination file is invalid.
When i changed my OS to Win2k/SP3 (no more dual-boot), and installed the same NVIDIA detonator driver version, it worked. When i started to copy files again, it later BSOD, and said PAGE_FAULT_ERROR (something like this). When installing from CDs, it will report that my .CAB files are corrupt or have insufficient swap file space (i set mine manually at 1.2Gb size). Then there are times during my reboots and entering win2k, i found my keyboard and mouse (all PS/2) not working and windows loads as usual.
Later i changed my PCI latency setting from 32 to 96, i managed to install from CD without much further issues.
Upon reading these posts here, i didn't realize that the MSI KT4 series or the KT400 chipset had so much issues! i have read from countless sites like extremetech and anandtech and none reported about this particular errors i have encountered during my first 2 days with this setup. (this is my first Athlon setup, i'm previously and Intel person-type).
So far, i conclude in my settings is that:
-32-Bit settings in Bios settings for CD/DVD/CD-RW must be disabled, i concur with Shumway's recommendations.
-DMA settings in Windows 2000 for CD/DVD/CD-RW must be set to PIO mode otherwise when copying from CD to HDD will have read errors.
-Installing the PCI latency fix really does wonders for my set. (PCI Latency fix ver 1.9). Now i can copy files from all my drives without worrying so much about CRC errors. Thank you, George E. Breese.
-I really want to know why in WinME i can't install the NVIDIA detonator drivers, while in Win2K i can.
I post again, once i have done some more tests to my system, especially CD-R writes.
Angel17

Invalid data status error during the data extraction

Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
Dhanush

Sir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).

Hi,
I have a file where fields are wrapped with ".
=========== file sample
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
==========
I am having a .net method to remove the wrap characters and write out a file without wrap characters.
======================
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
======================
the .net code is here.
========================================
public static string RemoveCharacter(string sFileName, char cRemoveChar)
object objLock = new object();
//VirtualStream objInputStream = null;
//VirtualStream objOutStream = null;
FileStream objInputFile = null, objOutFile = null;
lock(objLock)
try
objInputFile = new FileStream(sFileName, FileMode.Open);
//objInputStream = new VirtualStream(objInputFile);
objOutFile = new FileStream(sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString(), FileMode.Create);
//objOutStream = new VirtualStream(objOutFile);
int nByteRead;
while ((nByteRead = objInputFile.ReadByte()) != -1)
if (nByteRead != (int)cRemoveChar)
objOutFile.WriteByte((byte)nByteRead);
finally
objInputFile.Close();
objOutFile.Close();
return sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString();
==================================
however when I run the bulk load utility I get the error
=======================================
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).
==========================================
the bulk insert statement is as follows
=========================================
BULK INSERT Temp
FROM '<file name>' WITH
FIELDTERMINATOR = ','
, KEEPNULLS
==========================================
Does anybody know what is happening and what needs to be done ?
PLEASE HELP
Thanks in advance
Vikram

To load that file with BULK INSERT, use this format file:
9.0
4
1 SQLCHAR 0 0 "\"" 0 "" ""
2 SQLCHAR 0 0 "\",\"" 1 col1 Latin1_General_CI_AS
3 SQLCHAR 0 0 "\",\"" 2 col2 Latin1_General_CI_AS
4 SQLCHAR 0 0 "\"\r\n" 3 col3 Latin1_General_CI_AS
Note that the format file defines four fields while the fileonly seems to have three. The format file defines an empty field before the first quote.
Or, since you already have a .NET program, use a stored procedure with table-valued parameter instead. I have an example of how to do this here:
http://www.sommarskog.se/arrays-in-sql-2008.html
Erland Sommarskog, SQL Server MVP, [email protected]

ISE 1.2 change account duration - invalid account date error

When I tried to extend the duration of some accounts to july 2014 on my ISE 1.2 I got the invalid account date error. When I tried to extend the user to the 5th of february it worked. I couldn't go further thant that date although I can select a date 365 days away from now.
Is there a limitation when you want to change the account duration?
Regards,
Mathieu

Hi Mathieu,
Probably you are hitting this defect
CSCum10047.
This will be addressed in upcoming releases mostly in ISE 1.2.0. 899 Patch 7 which is tentatively scheduled to be released at the end of February .

Flash IDE, Haxe & OpenFL - Invalid Data Swf Error #2136

We've recently run into a show stopping issue and can't seem to find any one else on the net who has the same problem (although there have been similar ones).
We're currently developing a game using Haxe and OpenFL. We use FlashDevelop to code the game and the official FlashIDE (CS6) to create UI/menus which is then hooked up via code in FlashDevelop. A few weeks ago the FlashIDE crashed while the FLA was being worked on. Nothing appeared to be wrong as the file opened normally, however, after building our game in FlashDevelop we received the following message "Invalid Data Swf Error #2136". Since then we've done a handful of things that will seem to fix it temporarily, but as of now, none of those solutions work. At this point we think its some sort of flash limit or an issue with OpenFL, Haxe, and FlashIDE (or some combination of).
I'd like to note that we've noticed some weird behavior - if we removed any clip the error disappears and if we add it back, the error returns.
Here's what we've tried:
recreating movie clips that were created after the crash
converting the FLA into a archive and repairing it with WinRAR
splitting the FLA into two files
copying the library into a new FLA file
Any ideas on how to fix this would be greatly appreciated!

If you found a specific clip that caused it to build or fail I'd say it's a possibility. However you mentioned in the OP that you took 'any' clip out and it works but put it back and it breaks. This really seems like a limit. Limits should be openly documented however.
Perhaps you should take a large bitmap and a complex vector and drop them in 2 different symbols. Then duplicate these symbols until you have more symbols than you currently have. Internally they will all point to the same graphics so it won't be a heavy file. Try exporting that with OpenFL and see if it's a library reference limit.
I'm sure you get what I'm getting at. If limits arent documented, you may need to stress test the libraries, languages and frameworks yourself using simple self made tests.

Error ab_RfcSetHeader invalid compression value 5 received

our program is using the latest 32 bit non-unicode library(from 640 branch), and is trying to talk to a SAP BI7 server on a netweaver2004s with stack 10, and presumly has a 64bit unicode rfc library. Is there a known issue in the RFC communication between a 64bit unicode AIX installation using a 32bit nonunicode rfc library?
We received this error from RFC dispatch call:
>>> RfcDispatch [6] ...
Received RFCHEADER [6]: 01/BIG/IEEE/SPACE-U2/4102
Error ab_RfcSetHeader> invalid compression value 5 received
now, this happened after the incoming RFC connection request is accepted.
*> RfcAcceptExt: -a SAPB05 -g vb05cs01 -x sapgw00
L-GetCodePage (DEFAULT-CP) rc = 0: 1100
resize I/O buffer to 16000 bytes
>>>> [6] < accepted > : REG <ac: 6> L >>> ACCEPT
*> RfcRegisterProgram ...
        Server Program ID     = SAPB05
        Host name of Gateway = vb05cs01
        Service of Gateway    = 3300
        RFC-Trace             = OFF
        SNC Own Name          =
        SNC Library Name      =
        RFC Handle            = 6
<* RfcRegisterProgram ended successfully
<* RfcAcceptExt ended successfully [6] *>
>TS> Tue Nov 14 12:03:22 2006
<* RfcWaitForRequest [6] : returns 0:RFC_OK

This error occured when the MDMP code page is set to unicode, it needs to be set to non-unicode in order for the unicode library to talk to the non-unicode exteranal rfc program

HT4489 "Invalid contact data" error BB to iOS7 import. Suggestions? Thank you.

Hello, thanks for taking a look at this. I am attempting to import my contacts from my Blackberry 9670 running version 6 to my iPhone 5s running iOS 7.0.3, and I get the following error: "Unable to import vCard. This vCard cannot be imported because it contains invalid contact data." I am backing up only contact information from my Blackberry, and there are only 1100 contacts, well under the limits. Your suggestions would be appreciated. Thank you.

See the attached step-by-step, very specific, detailed instruction, just as you've asked.
http://www.blackberry.com/btsc/KB17022
At Step 6, you will chose "One Way Sync FROM Device"
You follow the remainder of the steps as outlined.
After completed, you will return to your Sync setup as in Step 6 again and set that to Two Way Sync.
Set the conflict settings as you prefer:
Open BlackBerry Desktop Manager, and click on Synchronize.
Select Configure PIM.
Select the application whose settings you wish to change (for example, the Address Book application).
Select the Configure tab.
Select Advanced Settings.
Select Confilct Resolution, and select the option Handheld Wins, or which you desire to be.
I choose Let me decide because I too, like you, enter data on both the handheld and in Outlook and want to be able to tell the sync which data is correct according to my desires.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IOS7 Safari error Code: "invalid Input Data. No javascript allow." On payment by Credit cards. Pls help

Its Not possible to make any payment by Credit Card. After filling in the Data Form and continuing to finish the payment an error window appears Witz the Text " invalid Input Data. No javascript allow..." Orher Browsers are working well.
How can i fix this Problem

Its Not possible to make any payment by Credit Card. After filling in the Data Form and continuing to finish the payment an error window appears Witz the Text " invalid Input Data. No javascript allow..." Orher Browsers are working well.
How can i fix this Problem

4404 boot error, Bad data CRC

HI,
i have a 4404 Controler and when it boots i get the error message,
Bad data CRC, i upgraded to OS 4-0-219-0 then 4-1-185-0 but now im getting the message
bzImage Image Integrity Check Failed (Bad Data CRC). Hanging
anything that i can do ?
Thanks
Dan

Try to revert back to the backup image on the controller. If this fails, it's probably bricked and you need to replace it under smartnet.

Invalid compressed data--crc error (RHEL ES 3.0)

Similar Messages

Maybe you are looking for