Invalid FF Log Report
Hi All,
Recently all GRC projects which are using GRC 10 and GRC 10.1 versions have a common issue called "Invalid FF Log Reports"
I browsed through a lot of discussions in SCN and lot of SAP notes as well, but don't have correct information on
why this is happening and how to fix this issue.
Few things as per my understanding:
1. If Firefighter Log synch and FF Workflow synch both are running together though parameter 4007 set as "YES"
Apart from this are there any reasons why the workflows shows Invalid FF log report? Please suggest
SAP Suggestions to fix this issue: I gathered these options to try but wanted advise from users who have used these options and did they work?
1. As per note 1781142, SAP suggest to cancel those log review workflows with "Invalid FF Log report"
2. Need to identify the workflow with Invalid FF log report generated for which FF session using " 2122027 - How to identify the workflow generated for a given FFID session?"
and then Execute program "GRAC_EAM_ERROR_LOG_WORKFLOW" to clean-up all cases where Invalid FF Log Report got generated.
This program comes as part of SAP Note "1930562 - Workflow got generated with empty logs due to inconsistency"
3. SAP Note 1934127 - 1934127 - GRC10 EAM: EAM recovery program to retrieve missing log and to generate the missing workflows
This program GRAC_EAM_LOG_SYNC_TIMEBASED has anyone used it?
Actually if the program GRAC_EAM_ERROR_LOG_WORKFLOW clean-up all the workflows with Invalid FF log report then I want to run this program
to re-send workflows to controllers again. But during execution of this program what are the options to be selected in order to run this
program only for those workflows failed with Invalid FF log report?
~ Madan
Hi Madan,
please check thread http://scn.sap.com/thread/3583971
At the end, there is a short handling document for GRAC_EAM_LOG_SYNC_TIMEBASED.
BR
Melanie
Similar Messages
-
FVAT log report having invalid characters
Hello ,
The FireFighter VFAT log report which received through email contains invalid characters. And the log report received as TXT file. I could not able to paste the invalid characters here as its not able to show up in this page. But it looks like a square box where ever we suppose have blanks in the log report it comes with this square box characters.
Please help me to find any solution to avoid these invalid character.
here is the Virsa release details
VIRSA 400_640 0008
FireFighter 3.0 release
Thanks
SridharHi,
I suspect that the issue is with the language settings.
- Check the default language of the system
- Check the user parameters in SU01 for the GRC VFAT user ID (Parameters shuch as CDG will force the language).
- Check the SCOT settings. (Your basis team can help)
This should resolve the issue.
Regards,
Raghu -
Retail Datawarehouse batch INVALID ITEM/STORE REPORT
Hi,
After running DataWarehouse batch, in the DWI server sometimes appears the following two files in the arch directory (/app/retail/data/arch/done.20110726): itemfile, vatfile
when open itemfile, appers the following:
INVALID ITEM/STORE REPORT
This report indicates items that were sold at stores not stocking the items lis
ted.
All items listed were processed but one of the following actions should be take
n:
1) items should be set up in Retek at the stores listed
2) items should be physically removed from the stores listed
STORE ITEM
0000000012 100385251
INVALID ITEM/STORE REPORT
This report indicates items that were sold at stores not stocking the items lis
ted.
All items listed were processed but one of the following actions should be take
n:
1) items should be set up in Retek at the stores listed
2) items should be physically removed from the stores listed
STORE ITEM
0000000013 100385251when open vatfile, appers the following:
VAT WARNING AND ERROR MESSAGES FOR STORE 0000000012 ON TRANSACTION DATE: 20110714
APPLICATION ERROR: Record#=0000006420: Table vat_item has no entry for item=100385251 *region=0001* related to store=0000000012
VAT WARNING AND ERROR MESSAGES FOR STORE 0000000013 ON TRANSACTION DATE: 20110714
APPLICATION ERROR: Record#=0000001720: Table vat_item has no entry for item=100385251 *region=0001* related to store=0000000013Since explicity seems to be a problem with record of item=10038525 on table VAT_ITEM
I run the following query in RMS
select *
from vat_item
where item = 100385251and it gaves me this results
ITEM;*VAT_REGION*;ACTIVE_DATE;VAT_TYPE;VAT_CODE;VAT_RATE;CREATE_DATE;CREATE_ID;CREATE_DATETIME;LAST_UPDATE_DATETIME;LAST_UPDATE_ID
*100385251;1*;20/07/2011;B;0;0;19/07/2011;LBARBOSA;19/07/2011 05:15:19 p.m.;19/07/2011 05:15:19 p.m.;LBARBOSA
*100385251;1*;19/07/2011;B;1;12;19/07/2011;LBARBOSA;19/07/2011 04:35:37 p.m.;19/07/2011 04:35:37 p.m.;LBARBOSA
100385251;2;19/07/2011;B;0;0;19/07/2011;LBARBOSA;19/07/2011 04:35:37 p.m.;19/07/2011 04:35:37 p.m.;LBARBOSA
also I look for data related in RDW database, and some of it appears. Now I don't have no idea what cause the problem, neither its implications. I write you to know if something similar happened to any of you, and If you any idea of it
Edited by: luisurea on 27-jul-2011 14:46luisurea: I'm not sure that the itemfile and vatfile records you indicate are being produced by RETL DWI batch code such as slsildmex.ksh. I assume you're running version 13 of DWI/RDW? What matters to RDW is that every row from the incoming RDWT file which slsildmex.ksh consumes, is output to slsildmdm.txt file, and that every row from slsildmdm.txt file is consumed and properly loaded to RDW target table sls_item_lm_dm table. DWI modules like slsildmex.ksh do have reject processing, for instance if an RMS.ITEM_LOC_SOH/ITEM_LOC record is not found for data in the RDWT file. In that case, the batch log and error (rfx/log and rfx/error) output of the run of slsildmex.ksh should have noted such a reject. I'm wondering if your itemfile and vatfile are artifacts of an RMS batch process such as posupld. If you're doing proper data validation from the RDWT file, to slsildmdm.txt file, to SLS_ITEM_LM_DM table in RDW, and the F_SLS_AMT (i.e. retail value) facts match how you have RMS/ReSA configured, then your sales integration to RDW is fine... and thsoe files might be more related to RMS sales uploading. Hope that helps,
Dan -
Firefighter log report does not show programs executed under SA38/SE38
We are on version 400_700 of Compliance Calibrator. When executing the log report, the report name only shows "RFC". We are testing SA38 & SE38. I expected the report to display the program name. Is there something set up wrong or are my expectations too high? Thanks!
Hi Vikki,
I dont think you can see the programs executed under SA38/SE38.
The functionality of Virsa Firefighter allows you to see the following log reports:
Firefight log summary
Reason/Activity report
Firefight Transaction usage report
Invalid Firefight ids/Owners/Control
Log Report
SOD conflicts in Firefighter
Hope this helps.
Thanks,
Kiran Kandepalli. -
RAR 5.3 SP8 - Invalid Mitigating Controls Report Issue
Hello,
When I view the Invalid Mit Controls Report, and I click the "Click to Change" button, it brings me to blank mitigating controls screen with an error at the bottom of the screen that reads "Category should be U, R, P, H or O"
Has anyone seen this before? The log shows nothing when I look to it to view more info about the error...
Any troubleshooting tips or is this something I need to bring up with SAP?
Thanks!
Jesyep
-
I need the Log Report for the Data which i am uploading from SAP R/3.
Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nileshHi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob -
Audit Log Report not display and error is "Report Contents No data"
Dear All,
i have reuired the audit log report but when i am click the Site Action->Site Setting->Audit log reports->Run a custom report-> select the day and option and click ok the i have received the error
Please help me please check below screen shotCan you please confirm that you have configured events to audit?
Configure
audit settings for a site collection
Here is step by step how to configure audit setting.
http://anthony-verschraegen.blogspot.ca/2013/04/sharepoint-2013-configuring-audit.html
Amit -
hi everyone, we are the owners of the late 2013 retina macbook pro, with this keyboard and trackpad issue.
please help us by looking at your console for this log report:
08/11/13 00:49:01,000 kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
we are really curious whether it is only happening on our 13" rMBP or is it happening on everyone's mac with mavericks.
especially we would like to know whether this report is also on 2013's mac. MacBook Pro Retina 15" late 2013 Haswell, iMac Haswell, MacBook Air Haswell.
Thanks for your help, really appreciate all your reports!
please help us so that we could try track it down whether the issue is hardware or software related.Yes, after the EFI update I'm seeing over 4,000 of these error messages.
12/16/13 1:08:32.000 PM kernel[0]: The USB device Apple Internal Keyboard /Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
This happens everytime I touch the keyboard or trackpad. I believe this should not be a normal ocurrence performing such a NORMAL and Essential task as using the imbedded peripherals to operate a machine.
I contacted Apple Support and spoke with a Senior Advisor for troubleshooting. I was instructed to send capture data to apple showing the console errors in their entirety.
From my impressions speaking with Apple today, this is not a normal error and a exchange might be offered, but I'm afraid that will not remedy the issue. This being a chronic and widespread issue with OSX Mavericks and late rMBP Haswell models. -
Hi,
We checked 2007/10 Asset balance via report(S_ALR_87011963). We get the following error. Could you pls let me know why we can't run 2007/10 Asset balance?Thanks.
=======================
Report date 2007.10.31 is invalid for this report
Message no. AU 116
Diagnosis
You can only run reports for closed or future fiscal years using a report date on the last day of a fiscal year.
Procedure
Correct the report date as necessary.
The last day of the fiscal year in company code 0360, in which the report date lies, is 2007.12.31.
========================
best regards
Park HanHi Park
Assets reports can be run as at month-end date (not any date). Therefore check whether 31.10.07 is the month-end date for Oct.
Regards
NW -
Issue with Audit Log report in SharePoint 2010
I have enabled REPORTING feature at site collection level and configured the site collection audit settings. I tried to generated Audit log reports, most of the time it keeps on processing as shown in fig.It
keeps on processing, never comes to report generated successful message. how to overcome this issue?i'm facing same issue, even when i tried to generate report for limited limited period(5 days) for a particular event(ex: delete or restore items (or) edit items).
I think, the below reference may guide you solve your issue
http://sharepoint.stackexchange.com/questions/17151/how-often-should-the-auditing-log-be-cleared-to-not-affect-performance
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer -
SLG1 logging report : print error says 'This object is not documented'
Hi,
I run the logging report (SLG1) and selected one of the line items from the
list, then I pressed F6 (button with the spectacles) to view the
technical information. This was presented, but when I try to print this
information I get the message 'This object is not documented'.
Do anyone know wht this error is displayed? How do I correct it so that I can print the info required.
Regards,
VijayaHi,
This is might be because of some user settings in the SAP with print parameters.
As of now if you want to do the below operation, you can by pass the error message available in the function module and take the print out.
In the function module DOCU_PRINT, error is avialable at line no. 318,
message i775(sd) with text-310.
Regards,
Santhosh -
SPM Reporting - Log reports display on front end
Hi,
We have implemented GRC 5.3 and have an issue on the SPM reporting through the front end.
We have done config in dev and have the following jobs running in the background every 1 hour:
1. /VIRSA/ZVFATBAK
2. /VIRSA/ZVFAT_LOG_REPORT
3. /VIRSA/ZVFAT_V01
4. /VIRSA/ZVFAT_V03
The log on the back-end displays all activity of FF user, but when going to the front end I seem not to get any reports to display.
We have created the connectors via the config page, but when trying to drill through the selection criteria we found that the FF user does not come up as a selection variable. We see the system defined though.
Any suggestions how to get the reporting to display on the front-end?
Kind Regards, MelvinSantosh,
You should only need the /virsa/zvfatbak job running in the background. However, if the emails are not triggered for the log reports, you may wish to schedule the /virsa/zvfat_log_report program to run after completion of /virsa/zvfatbak as that is the program which actually sends the notifications.
Regarding the RFC user, check the authorisations held in the Firefighter Administrator role as those will not be too far away!
Simon -
Oracle Apps 11i
Database : 9i
can i get users logging report to a specific responsibility / apps on daily basis
i have this query can anyone correct if i am wrong or is there any other way -
select b.user_id,user_name, a.description,first_connect, last_connect,r.RESPONSIBILITY_name
from fnd_user a, icx_sessions b, fnd_responsibility_vl r
where a.user_id = b.user_id
and r.RESPONSIBILITY_ID = b.RESPONSIBILITY_ID
------and a.user_name like '%abc%'
and r.RESPONSIBILITY_name like '%In%Lo%Pur%'
and b.last_connect >= sysdate
order by first_connect
Regards,Hi,
You can run "Signon Audit Users", "Signon Audit Responsibilities" concurrent programs to get these details.
If you want to get the same from the backend, please refer to:
Note: 295206.1 - How to Count Total Number of Users Connected to ORACLE Application
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=295206.1
USERS CONNECTED
Re: USERS CONNECTED
Number of users logged in last two months
Number of users logged in last two months
Regards,
Hussein -
Usage Report and Audit Log report showing different totals
I am trying to understand the differences displayed in two similar reports. The first report is an 'Audit Log' Report and it is displaying the number of Resource Account creations over a time period. The second report is a Usage Report using the exact same criteria (objectType = Resource Account and Action = Create). The totals I get back are VASTLY different. Can anyone explain? Is this a known bug?
Hi,
In any report we don't show the storage policies information. In Cost report if the storage policies have different rate factors then we will show the split for the storage information. But in usage report , rate factors will not be applicable as we don''t show the cost details. Hope this clarifies your question. Please let us know if you need more information.
Thanks,
Lakshmi -
Change log report S_AHR_61016380 not picking IT0025
Hi Experts,
I need the change log report to capture the details of changes made in IT0025 (Appraisals).
I have made necessary configurations to the below tables by watching in other SDN threads, but still my problem is not solved.
Also made changes to master data (IT0025) and tested, but still no use.
Log report is not picking changes made to IT0025.
Please suggest
Thanks
VenkateshDear Expert,
for logged changes in infotype report we need to install crystal report.
please suggest.
Maybe you are looking for
-
Hi, Is there a way to check if there is an active alarm on a cisco switch/router (M4900/4948 series and 2960 series) using SNMP ? I'm looking for a simple quick way to verify if an alarm is active (any alarm) is there some sort of general OID that gi
-
Hi Gurus I'm getting this error while creating a new application - "Permission Denied" (in Workbench) and some "HRESULT error" (in Webclient). Can someone tell me the possible reason relating to this issue? Thanks in advance.
-
I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Than
-
i need help with what i posted in the title
-
When my husband set up my iPad, he imported my daughter's phone contacts. Is there a way to delete her contacts and import my own?