Inventory Extract structure

hi all,
I cant able to find the 2lis_03_bx(Material stock) extract structure under the inventory application in the LO customizing
cockpit screen .
The other extract structures 2lis_03_bf and 2lis_03_um are available.
can anbody help how to get the 2lis_03_bx extractor under Inventory application.
Thanks
satish.

Hi Sathish
BX datasource is only used to transfer initial stock. Is a full update datasource that is used once, after the stock init process. Thats why you can't find it in the cockpit (it doesnt manages delta and flexible structure, it's only to transfer actual stock). You have to activate that datasource in RSA5. You also have to activate UM and BF datasources in RSA5 before using them. The Cockpit activation is only customizing, it doesn't activates the "program" that makes datasource work.
you can check this thread for more information: IM Scenario using 2lis_03_bx
check this link for inventory
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31

Similar Messages

Activating Extract Structures in LBWE

Hi, I will be looking to activate my Inventory Controlling Extract Structures MC03BF0 and MC03UM0 with transaction LBWE. I am doing this in my dev client 200. I believe the system only allows me to activate the structures in client 200. My data is located in client 220. Once I activate the structure in 200 it prompts for a transport.
Do I need to transport the activation to client 220 or should I just have authorization to activate the structures in 220 as I can in 200?
Also, what would I do in production if I needed to deactivate and reactivate the structures?
Thanks for any help with this.

Hi,
I was having one such situation with Test system.there we were having 2 clients..we have to transport to two clients
it depends on how clients are configured. sometimes when you carry out development it should reflect in both the clients without transport. with next client you just have to load data..
check with basis how transport layer are configured ...
Thanks and regards

Changes in extract structure

Hello All,
The extract structure for 2lis_11_vaitm has been changed and since then whenever I try to execute the datasource using RSA3.
I get an error Import_mismatch_error.
The extractor was working fine in dev. So I collected one structure which was missing in quality.
After releasing the same in quality, I deleted the setup tables and did run RSA3 - I got 0 records.
As per the SAP note 328181 - the old Sales orders are not compatible with the new structure and so we get the same error.
If any new documents are posted they will come in RSA3. How do I make sure that in Production I dont miss any data?
Regards,
Nikekab

Hello Venkat,
I found one error description though:
Error when resetting DataSource 2LIS_11_VAITM OKQCLNT332 to the active version
Message no. RSO410
Diagnosis
Errors arose when activating DataSource 2LIS_11_VAITM. An active version already existed before theactivation.
System Response
DataSource 2LIS_11_VAITM could not be resetto the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
Procedure
The old active version of DataSource 2LIS_11_VAITMcan no longer be used. Remove the cause ofthe activation error and activate DataSource 2LIS_11_VAITM anew.
Regards,
NIKEKAB

Inventory Extraction Issue

Hi Gurus,
I have couple of questions here regarding Inventory extraction, and I will ask one by one:
1. I have a requirement to develop a report called " Stock Ledger Report " where the KPI's would be Quantity, Cost & Retail Price. The 2 KPI's Quantity & Costs are straightforward and the data for these come from MSEG-MENGE & MSEG-MENGE respectively. Retail Price is a bit complex since it is dependent on time and my client being a retail one their prices are subjected to change according to time. This is being calculated from different tables in the R/3 side so it's pretty clear that I have to add a custom field to my extractor.
Now my Question is, to which data source should I add the custom field, will it be 2lis_03_bx or 2lis_03_bf?
2. I started the extraction sometime back for 2lis_03_bx since that has to be extracted first, but I am getting a runtime error that says:
Short Text
    Too many parameters specified with PERFORM.
What happened?
    In a subroutine call, there were more parameters than in the
    routine definition.
    Error in ABAP application program.
    The current ABAP program "SAPLMCB1" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class
     'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
    caught nor passed along using a RAISING clause, in the procedure "UPDATE_CALL"
     "(FORM)"
    Since the caller of the procedure could not have expected this exception
     to occur, the running program was terminated.
    The reason for the exception is:
    A PERFORM was used to call the routine "F0001_UPDATE" of the program
     "RMCSA278".
    This routine contains 4 formal parameters, but the current call
    contains 5 actual parameters.
    parameters.
The first thing I did was to check for the OSS notes 315880 and 353042 that have to be installed in the R/3 system to perform the data loading. I got this from the SAP White paper, How to handle Inventory scenarios in BW.
I didn't find these notes in my R/3 system here, so I searched for these nodes in market place. The first note didn't make much sense to me where as the 2nd note was about how to activate the transaction key (PROCESSKEY).
According to what was mentioned in market place, in order to work with the Inventory extractors I have to activate the determination of the PROCESS KEY. So how do I know which PROCESS KEY corresponds to my requirement ? I could see all the process keys in the Transaction key maintainence for BW in SBIW.
My Question is if these 2 OSS notes are installed. will the issues be resolved ??
Thanks,
Guru.

Hi
check this SAp note for your dump
Note 546844 - PERFORM command: Error message: 'Too many parameters'
cheers,
Swapna.G

Custom Datasource using View COVJ - R8359 Invalid extract structure

I'm trying to build a custom datasource so I can get at plan line item data with partner object (I've tried using 0CO_OM_CCA_1 but I dont get the partner object for plan data - no idea why). So I thought if I create a datasource using COVJ I can get it out. However when I try and save the custom datasource (created using RSO2) I get the error R8359 Invalid extract structure: You tried to generate an extract structure with the template structure COVJ. This operation failed, because the template structure quantity fields or currency fields, for example, field WOG001 refer to a different table.
I saw posts saying when people get this error thye should reference the table these fields come from in the view. So I've talked to our ABAP'er and I asked him to reference the table these fields come from but he said this cant be done because these come from a structure not a table.
Any ideas?
Thanks
Joel

The WOG* columns in table COEJ, one of the tables contributing to the COVJ view, use CCCUR-CURKY as the reference table-column for those quantities. The ABAPer you spoke to is correct that CCCUR is a structure. View value fields inherit their reference table-column from the source, in this case COEJ, and since this source table is an SAP delivered table it cannot be modified change this reference.
This means that you're only option for extracting the data out of the COVJ view would be to create a Function Module and use that Function Module as the basis for your DataSource.

Invalid Extract Structure error while creating "Generic DataSource" on a view...

Dear All,
I have created a view on following tables MARA, AFKO and MSEG. The Table/Join condition is as follow:
AFKO--AUFNR = MSEG--AUFNR
AFKO--PLNBEZ = MARA--MATNR
I have included all the fields from MSEG and other all fields from MARA and AFKO. The view is created successfully and contents/records are also being fetched/displayed from this view.
See screen shot as well:
But when I go to RSO2 to create a "Generic DataSource" on this view. I get a series of warning messages and then error message "Invalid Extract Structure" and therefore I'm unable to create my DataSource on this view. See below screen shots of warning and error messages.
Other warning messages are as follow:
Field GAMNG with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
Field PLSVB with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
Field PLSVN with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
Field LODIV with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
Following is the screen shot of error message:
1. How can I get rid of this error message and be able to create my "Generic DataSource" on top of this "View"?
2. What should I do to resolve the above warning and error messages?
I will appreciate your reply.
Many thanks!
Tariq Ashraf

Hi Vipul,
as you can find in CKIS table, the reference feild for value feild "WERTN" is missing.
As per the table the reference feild is HWAER. This should have been used in place of FWAER.
Try mentioning this in your view and this should work.
Also I am a little enthusiastic to know, what are you trying to get from the datasource.
If you are trying to get the cost estimate of multi level BOM, not (just one child level), then this approach may not work.
There is a BAPI that gives such itemization split. Just FYI, in case you are looking for multi level explosion.
"BAPI_COSTESTIMATE_ITEMIZATION".
Hope this helps.
Naveen.A

Invalid Extraction Structure Template

Hi All,
   Am getting "Invalid Extraction Structure Template"
   error while creating generic datasource, am creating
   datasource based on a view.
   please suggest a solution.
Thanks

Hi,
If we have any quantity or amount fileds in views, we have to provide refernce objects for Units.
Goto Viwe -->> check for tab Units and provide units from source tables(like : <tablename>-<fieldname>)
Srini

No extraction structure active or no BW connected

Hi All,
While filling the setup Table in SBIW, we are getting Error
<b>No extraction structure active or no BW connected .</b>
I have Activated extract structure in LBWE and also checked in ROOSOURCE table and found the datasource is ACTIVE.
Also, tried replicating and extracting Master Data, it works fine, it means that my connection is good. I can see this structure MC11VA0ITM is Active in SE11.
Getting same error message for all the datasources. We are working on R/3- ECC 5
And BW 3.5.
Anticipating response at the earliest.
Thanks
Jashaik
Points = Thanks

Shaik
Have you checked this thread
"No extraction structure active or no BW connected"
Hope this helps
Thanks
sat

Extract structure does not exist at the time of transport

HI ,
i am facing an shortdump error while transporting customized copa data source from r/3 dev to r/3 qua. The error analysis is
Extract structure does not exist at the time of transport
Long text of error message:
Technical information about the message:
Message class....... "RD"
Number.............. 041
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
please provide the solution asap

Hi Bharath,
Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
After activation try to retransport.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

Error while enhancing the Extract structure in LBWE

Hi All,
When I am trying to change the extract structure os logistic extractors in LBWE, it is giving me an error saying "Entries for application 11 still exist in the extraction queue".
Below is my scenario:
I have 3 clients in the same R/3 system, Client 010, 020 and 030.
Clients 020 and 030 are connected to my BW system. Client 010 will be used for all development while test loads can be done from clients either 020 or 030. Till now, I have tested my data flows only from client 030. Now, I have to add some extra field to the structure in LBWE but facing the above mentioned error.
I went into LBWQ in both the client 020 and 030 and deleted the queue and then tried to change the extract structure in client 010 but still the same error.
What else do I need to do to resolve this?
Thanks,
RPK.

Hi Raki,
We are still in development phase. I did all my developments(R/3) in client 010. Till now I did only full loads to BW from client 030 and haven't done any loads from client 020. My BW system is also connected to another sandbox client 100 but I haven't done any loads from that client aswell.
As I have to add some extra fields to the extractor from LBWE, I did the follwing steps in R/3:
1) I have deleted the setup tables from client 010, 020 and 030.
2) Deleted the data from LBWQ from clients 010, 020 and 030.
3) Trying to change the extract structure by clicking on "Maintenance" for the extractor in Client 010.
At this point it is throwing an error.
I thought that the client 100 might be a problem as I have transfer rules created in my BW system from this source system as well. As I do not need this source system anymore, I have deleted it from BW and tried changing the structure in LBWE but still the same problem.
Any ideas would be highly appreciated.
Thanks,
RPK.

Error while saving Extract Structure

Hi Friends,
We have enhanced the DataSource 0FI_AR_4 by adding new feilds. After that i went to Extract Structure to Un check (Deselect) the HIDE check box for newly added feilds and when i save the structure it is throwing the Error The OLTP source still has errors. When i go to detail it is giving message .........
*The OLTP source still has errors
Message no. R8417*
I Have checked the Extract Structure it is in Active and For the newly added Key Figures there are referenced table and Feilds.
WHat Might be the reason.
How can Deselect the check boxes for newly added At Hide Feild in the Extract Structure and Save it.
Thanks & Regards
Anand

Hi,
Check similar kind of threads in SDN
Re: The OLTP source still has errors Message no. R8417
Re: Urgent ! Error while append structure for EISBE field
Generic extractor help needed badly.
Thanks
Reddy

How to find out the tables from extract structures

Hi All,
As I know my data sources are 2lis_04_p_matnr,2lis_04_p_comp,2lis_04_p_arbpl.
How to find out the tables concerned with the fields in the extract structure.
Thanks

Pl check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
OR navigate to: help.sap.com - netweaver - bi content - supply chain - look for your application area and the extractor and you will see the source tables and fields.
Ravi Thothadri

BW FICA extract structures corrupted after upgrade from 4.6C to ECC6

Hi All. After the upgrade an include (FKKBWP) in the extract structure FKKOPBW_BASIC contained a field belonging to the APPEND structure ZAFKKOPBW_BASIC (originating from enhancing the configured structure). Also ZAFKKOPBW_BASIC is not visible in FKKOPBW_BASIC anymore, although when checking/activating the structure it complains about duplicate fields, which can only happen if ZAFKKOPBW_BASIC is still referenced. Furthermore, some new includes have also appeared in the extract, amongst others FKKOPBW_EVOLVED.
I have not been able to find any documentation regarding this. Two different systems were upgraded and the structures were corrupted in both systems in the same way, so this is not a fluke.
The application dumps when one tries to access it via SBIW->Settings for Application-Specific DataSources->Contract accounts receivable->Define Fields for the Extraction of Open Items, because the config and structures do not match.
All of this also applies to the Cleared Items as well.
Has anybody encountered this or can somebody point me to some documentation referering to this problem?
Regards,
Johan Loock

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

Problem in populating the new field from the extract structure. Kindly help

my requirement a new text field is added on R/3 side and I have to populate
the same field into BW.
In the R/3 a new customization table 'AAA' is created which will have
code - char 3 and
text - char 30.
The code field is added to a table BBB.
The SAP standard generic data source exracts data from the table BBB where in the new code field have been added.
Now I can the see the code field in the extract structure and not in the data source as the filed has selection value 'A' when checked in the ROOSFIELD table.
To populate the value in BW, I will be creating a Generic Master Data text wherein I fetch the values from the table 'AAA' which the fields code and text and replicate the same in BW.
In the reporting level, the code InfoObject will be selected as display both KEY and TeXT, by doing I can populate the values of TEXT in the reporting.
But to achieve the same I need to add the field code in the ODS but cannot do the same because I am not able to see the field code in the data source.
Kindly let me know how to achieve the same.
Also let me know if there is any alternate solution to populate the text field in BW.
Any Inputs will be appreciated.
Thanks

> You should get the userdatasources bound to the
> columns and assign the values of the recordset to
> each one and after that use "setLineData" to write in
> the matrix.
>
> hope it helps
Hi all,
i have created tables (non BO Tables) directly on the SQL-server and want to use recordset to populate a user form matrix.
Is there any workaround to achieve this using non BO tables?
Please provide some sample code since it is a very urgent matter.
regards
Daniel

What are the available extract structure

hi all
i have to generate a report for sales . i want to know what are the extract structure for sales.
and also let me know what are the standard cube for sales.
and how can i find them.
thanks in advance

You question is too generic it would better if you can precise
Check in R/3 - LBWE - > LO Cokpit you can expand nodes for SD to see their Extract structures
Sales -Application 11
Shipping - 12
Billing - 13
Refer help
http://help.sap.com/saphelp_nw04/helpdata/en/71/1769372b2b7d20e10000009b38f842/frameset.htm

Inventory Extract structure

Similar Messages

Maybe you are looking for