Invocation of update method on test pane of workshop fails

Hi all,
I'm testing a Data Service whose update map I have just finished. Everything seems fine, and it is pretty much along the lines of this guide:
[Understanding Update Maps|http://download.oracle.com/docs/cd/E13162_01/odsi/docs10gr3/datasrvc/Understanding%20Update%20Maps.html]
When I try to test the update operation I receive the following Exception:
com.bea.dsp.das.exception.DASException: com.bea.ld.QueryException: Illegal invocation of "update" operation on a DataObject with no changelist (did you forget to call SDOUtil.enableChanges()?).
Which would make sense if you're using the DAS client, which I am not, right? Seems that Workshop is forgetting to do something before the update operation can be called. Possible?
I have already done a "clean" and restart to weblogic, to no effect. Any clues on how to proceed testing this?
Thanks in advance.
Edited by: user11223373 on Jun 24, 2009 8:41 AM

Seems that Workshop is forgetting to do something before the update operation can be called. Possible?Nope, not possible. Updating through the IDE works fine, I've used it.
Are you perhaps forgetting to edit something before clicking on update/submit?
If you have indeed modified some data, but it is not being reflected in the changesummary - that would indicate an issue with your update map - most likely that whatever you edited is not mapped back to the source.

Similar Messages

JUnit/DBUnit rollback inserts/updates made by method being tested

When performing JUnit/DBUnit testing, when you setup your data by inserting/updating rows during initialization, those insertions and updates would be rolledback automatically during the TearDown step of the Unit Test, right?
My question is that if the inserts and updates are done on the method being tested what are the steps to rollback those inserts and updates?
Can it be done implicitly by JUnit/DbUnit? or do we have to do it manually?
We have an ADF Application Module method that is being J/DB-Unit tested and it calls a stored procedure that does a lot of things to many tables on the database. So it would be nice if the rollback was implicit.

Anton,
That would be nice, wouldn't it.
Unfortunately, that's not the way it works. You have to rollback/undo your changes explicitly. As you asked on another thread, flashback would be a nice way of doing it. If you have a suite of tests that runs, you can flash back the entire database at the end to put the DB back into a known state.
John

Update methode in model-view-controller-pattern doesn't work!

I'm writing a program in Java which contains several classes. It must be possible to produce an array random which contains Human-objects and the Humans all have a date. In the program it must be possible to set the length of the array (the number of humans to be produced) and the age of the humans. In Dutch you can see this where is written: Aantal mensen (amount of humans) and 'Maximum leeftijd' (Maximum age). Here you can find an image of the graphical user interface: http://1.bp.blogspot.com/_-b63cYMGvdM/SUb2Y62xRWI/AAAAAAAAB1A/05RLjfzUMXI/s1600-h/straightselectiondemo.JPG
The problem I get is that use the model-view-controller-pattern. So I have a model which contains several methodes and this is written in a class which inherits form Observable. One methode is observed and this method is called 'produceerRandomArray()' (This means: produce random array). This method contains the following code:
public void produceerMensArray() throws NegativeValueException{
     this.modelmens = Mens.getRandomMensen(this.getAantalMensen(), this.getOuderdom());
for (int i = 0; i < this.modelmens.length; i++) {
          System.out.println(this.modelmens.toString());
this.setChanged();
this.notifyObservers();
Notice the methods setChanged() and notifyObservers. In the MVC-patterns, these methods are used because they keep an eye on what's happening in this class. If this method is called, the Observers will notice it.
So I have a button with the text 'Genereer' as you can see on the image. If you click on the button it should generate at random an array. I wrote a controller with the following code:
package kristofvanhooymissen.sorteren;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
/**Klasse GenereerListener.
* @author Kristof Van Hooymissen
public class GenereerController implements ActionListener {
     protected StraightSelectionModel model;
     /**Constructor.
     *@param model Een instantie van het model wordt aan de constructor meegegeven.
     public GenereerController(StraightSelectionModel model) {
          this.model = model;
     /**Methode uit de interface ActionListener.
     * Bevat code om de toepassing te sluiten.
     public void actionPerformed(ActionEvent arg0) {
     this.model=new StraightSelectionModel();
     try{
     this.model.produceerMensArray();
     } catch (NegativeValueException e){
          System.out.println("U gaf een negatieve waarde in!");
     this.model.setAantalMensen((Integer)NumberSpinnerPanel.mensen.getValue());
     this.model.setOuderdom((Integer)NumberSpinnerPanel.leeftijd.getValue());
StraighSelectionModel is of course my model class. Nevermind the methods setAantalMensen and setOuderdom. They are used to set the length of the array of human-objects and their age.
Okay. If I click the button my observers will notice it because of the setChanged and notifyObservers-methods. An update-methode in a class which implements Observer.
This method contains the follow code:
public void update(Observable arg0,Object arg1){
          System.out.println("Update-methode");
          Mens[] temp=this.model.getMensArray();
          for (int i = 0; i < temp.length; i++) {
               OnbehandeldeLijst.setTextArea(temp[i].toString()+"\n");
This method should get the method out of the model-class, because the produceerRandomArray()-methode which has been called by clicking on the button will save the produce array in the model-class. The method getMensArray will put it back here in the object named temp which is an array of Mens-objects (Human-objects). Then aftwards the array should be put in the textarea of the unsorted list as you could see left on the screen on the image.
Notice that in the beginning of this method there is a System.out.println-command to print to the screen as a test that the update-method has been called.
The problem is that this update method won't work. My Observable class should notice that something happened with the setChanged() and notifyObservers()-methods, and after this the update class in the classes which implement Observer should me executed. But nothing happenens. My controllers works, the method in the model (produceerRandomArray() -- produce random array) has been executed, but my update-method won't work.
Does anyone has an explanation for this? I have to get this done for my exam an the 5th of january, so everything that could help me would be nice.
Thanks a lot,
Kristo

This was driving me nuts, I put in a larger SSD today going from a 120GB to a 240GB and blew away my Windows Partition to make the process easier to expand OS X, etc. After installing windows again the only thing in device manager that wouldn't load was the Bluetooh USB Host Controller. Tried every package in Bootcamp for version 4.0.4033 and 5.0.5033 and no luck.
Finally came across this site:
http://ron.dotsch.org/2011/11/how-to-get-bluetooth-to-work-in-parallels-windows- 7-64-bit-and-os-x-10-7-lion/
1) Basically Right click the Device in Device manager, Go to Properties, Select Details tab, Choose Hardware ids from Property Drop down.   Copy the shortest Value, his was USB\VID_05AC&PID_8218
2) Find your bootcamp drivers and under bootcamp/drivers/apple/x64 copy AppleBluetoothInstaller64 to a folder on your desktop and unzip it. I use winrar to Extract to the same folder.
3) Find the files that got extracted/unzipped and open the file with notepad called AppleBT64.inf
4) Look for the following lines:
; for Windows 7 only
[Apple.NTamd64.6.1]
; No action
; OS will load in-box driver.
Get rid of the last two lines the following:
; No action
; OS will load in-box driver.
And add this line, paste your numbers in you got earlier for USB\VID_05ac&PID_8218:
Apple Built-in Bluetooth=AppleBt, USB\VID_05ac&PID_8218
So in the end it should look like the following:
; for Windows 7 only
[Apple.NTamd64.6.1]
Apple Built-in Bluetooth=AppleBt, USB\VID_05ac&PID_8218
5) Save the changes
6) Select Update the driver for the Bluetooth device in device manager and point it to the folder with the extracted/unzipped files and it should install the Bluetooth drivers then.
Updated:
Just found this link as well that does the same thing:
http://kb.parallels.com/en/113274

Update method

I am writing a simple test application that plots a line depending on some values read from an array. I dont want to redraw the full line everytime a new point is added to the end of the line, instead i just want to leave the points already plotted and just draw a line between the last point and the next point in the array. Here is the code. when i run the code only the last point(line) gets drawn. i read that if you overwrite the update() method the screen should not be cleared.
public class NewPanel extends JPanel {
     int[] array;
     int ii = 0;
     //Graphics g;
     public NewPanel(){
          array = new int[200];
          for(ii = 0; ii <200; ii++ ){
               array[ii] = 100;
               repaint();
          this.setVisible(true);
          this.setBackground(Color.BLACK);
     public void update(Graphics g){
          paint(g);
     public void paint(Graphics g){
          g.setColor(Color.BLACK);
          g.drawLine(ii,array[ii],ii + 1,array[ii + 1]);
}

1/ Calling repaint puts an event onto the window manager's queue. When the window manager's thread gets time, the window is repainted.
The loop increments ii to 200 and puts 200 event onto the queue in a very short space of time.
By the time the window manager gets to take the first event off the queue and call update(), ii already is 200.
To see the update happen, you need to put your animation into a seperate thread, and incorproate a delay in it.
2/ update is called when the background is to be repainted by the component. Overriding it to call paint means that the background is not repainted by the component. It does not mean that anything you draw will stay on the window.
Different platforms apply different amounts of buffering to the window, so what you have drawn may persist until the panel is resized, of it may not persist at all. It may get overwritten if the windon gets covered, it may not.
Swing components override update to delegate drawing the background to paintComponent() anyway, so for swing you only ever need override paintComponent().
To get a persistant image, you would use an Image as a double buffer.
But in this case, as the image data is already in an integer array, the easier thing is to use the drawPolyline method.
The following shows the update happening as data is set by a separate thread, and allows the call to clear the background to be switched on by passing in a command line argument:import java.awt.*;
import javax.swing.*;
import java.util.Random;
public class NewPanel extends JPanel {
int[] xPoint;
int[] yPoint;
int numberPoints;
boolean clear;
static final int MAX_POINTS = 100;
static final int STEP_SIZE = 4;
static final int LEFT = 12;
static final int RING_RADIUS = 6;
public NewPanel (boolean clear){
    xPoint = new int[MAX_POINTS];
    yPoint = new int[MAX_POINTS];
    this.setVisible(true);
    this.setBackground(new Color(255, 255, 220));
    this.clear = clear;
public void animate () {
    new Thread (new Runnable () {
      public synchronized void run () {
        try {
          Random random = new Random();
          numberPoints = 0;
          while (numberPoints<MAX_POINTS) {
            // some random line data
            if (numberPoints==0) {
              yPoint[numberPoints] = getHeight()/2;
            } else {
              yPoint[numberPoints] = yPoint[numberPoints-1] + 10 - random.nextInt(21);
            xPoint[numberPoints] = STEP_SIZE*numberPoints + LEFT;
            numberPoints++;
            repaint();
            Thread.sleep(100);
        } catch (InterruptedException iex) {
    }).start();
static final BasicStroke FAT_STROKE = new BasicStroke (3);
public void paintComponent (Graphics g) {
    // if a command arg is given, clear the background
    if (clear) {
      super.paintComponent(g);
    // draw the line
    if (numberPoints>0) {
      // make it pretty
      Graphics2D g2D = (Graphics2D)g;
      g2D.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                           RenderingHints.VALUE_ANTIALIAS_ON);
      g2D.setStroke(FAT_STROKE);
      g2D.setColor(Color.black);
      // actually draw it
      g2D.drawPolyline(xPoint, yPoint, numberPoints);
      // highlight current point- if many rings show
      // then the background isn't cleared
      g2D.setColor(Color.red);
      g.drawOval(xPoint[numberPoints-1] - RING_RADIUS,
                 yPoint[numberPoints-1] - RING_RADIUS,
                 2*RING_RADIUS,
                 2*RING_RADIUS);
public static void main (String[] args) {
    JFrame frame = new JFrame();
    NewPanel panel = new NewPanel(args.length>0);
    frame.getContentPane().setLayout(new BorderLayout());
    frame.getContentPane().add(panel, BorderLayout.CENTER);
    frame.setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
    frame.setSize(2*LEFT+MAX_POINTS*STEP_SIZE, 300);
    frame.setVisible(true);
    panel.animate();
}Pete

Login settings will not update the local testing server files

When uploading to web server from local testing server, changing login settings in the control panel does not update the local testing server Restrict Access to page files. Causing login on website not to function.
It does however update the Connections file and the login wizard form.
What is the best way to change login settings before uploading site to web server?
Thanks
Dan

Dan - I am having the same exact problem. I'm using the restrict access and user registration and login - when attempting to use the Update Record wizard to allow users to change their password or email address, it doesn't change the record.

Insert or Update method - removed from Web Services v2.0?

Was the "insert or update" method on standard objects taken out of Web Services v2.0 for a reason? Is there an equivalent of this functionality in Web Services v2.0?
Thanks,
-Kevin

Hello,
You can make use of the Execute method in WS 2.0 as an alternate, but if you are looking out for InsertOrUpdate Functionality u have to use WS 1.0.

Conversion from awt to Swing, colored list widget, and awt update() method

Now that my Interactive Color Wheel program/applet is in Swing, I guess I should continue my previous thread in here from the AWT forum ("list widget with different colors for each list item?"):
* list widget with different colors for each list item?
My current issue involves two canvas (well, JPanel) refresh issues likely linked to double buffering. You can see them by running the following file with "java -jar SIHwheel.jar":
* http://r0k.us/rock/Junk/SIHwheel.jar
[edit add]
(Heh, I just noticed Firefox and Chrome under Windows 7 will allow you to run thie .jar directly from the link. Cool.)
[edit]
If you don't trust me and would rather run it as an applet, use:
* http://r0k.us/rock/Junk/SIHwheel.html
(For some reason the first issue doesn't manifest when running as applet.)
1) The canvas goes "wonky-white" when the user first clicks on the wheel. What is supposed to happen is simply the user sees another dot on the wheel for his new selected color. Forcing a complete redraw via any of the GUI buttons at the bottom sets things right. The canvas behaves itself from then on, at least until minimized or resized, at which point one needs to click a GUI button again. I'll be disabling resizing, but minimizing will still be allowed.
2) A button image, and sometimes toolTip text, from an entirely different JPanel will appear in the ULC (0,0) of my canvas.
Upon first running the new Swing version, I had thought everything was perfect. I soon realized though that my old AWT update() method was never getting called. The desired case when the user clicks somewhere on the wheel is that a new dot appears on his selected color. This usually allows them to see what colors have been viewed before. The old paint(), and now paintComponent(), clear the canvas, erasing all the previous dots.
I soon learned that Swing does not call update(). I had been using it to intercept refresh events where only one of the components on my canvas needing updating. Most usefully, don't redraw the wheel (and forget the dots) when you don't need to. The way I chose to handle this is to slightly modify the update() to a boolean method. I renamed it partialOnly() and call it
at the beginning of paintComponent(). If it returns true, paintComponent() itself returns, and no clearing of the canvas occurs.
Since I first posted about these two issues, I've kludged-in a fix to #1. (The linked .jar file does not contain this kludge, so you can see the issue.) The kludge is included in the following code snippet:
    public void paintComponent(Graphics g)
        Rectangle ulc;
     if (font == null) defineFont(g);
     // handle partial repaints of specific items
     if (partialOnly(g)) return;
        ... // follow with the normal, full-canvas refresh
    private boolean partialOnly(Graphics g)
     boolean     imDone = true;
     if (resized > 0) // this "if { }" clause is my kludge
     {   // should enter on 1 or 2
         imDone = false;
         resized += 1;     // clock thru two forced-full paints
         if (resized > 2) resized = 0;
        if (wedgeOnly)
         putDotOnWheel(g);
            paintWedge(g);
         drawSnake(g);
         drawSatSnake(g);
         updateLumaBars(g);
            wedgeOnly = false;
          else if (wheelOnly)
            wheelOnly = false;
          else
            imDone = false; // was paint() when method was update() in the AWT version
        return(imDone);
    }Forcing two initial full paintComponent()s does whatever magic the double-buffering infrastructure needs to avoid the "wonky-white" problem. This also happens on a minimize; I've disabled resizing other than minimization. Even though it works, I consider it a kludge.
The second issue is not solved. All I can figure is that the double buffers are shared between the two JPanels, and the artifact buttons and toolTips at (0,0) are the result. I tried simply clearing the top twenty lines of the canvas when partialOnly() returns true, but for some reason that causes other canvas artifacting further down. And that was just a second kludge anyway.
Sorry for being so long-winded. What is the right way to avoid these problems?
-- Rich
Edited by: RichF on Oct 15, 2010 8:43 PM

Darryl, I'm not doing any custom double buffering. My goal was to simply replicate the functionality of awt's update() method. And yes, I have started with the Swing tutorial. I believe it was there that I learned update() is not part of the Swing infrastructure.
Problem 1: I don't see the effect you describe (or I just don't understand the description)Piet, were you viewing the program (via the .jar) or the applet (via the .html)? For whatever reason, problem 1 does not manifest itself as an applet, only a program. FTR I'm running JDK/JRE 1.6 under Windows 7. As a program, just click anywhere in the wheel. The whole canvas goes wonky-white, and the wheel doesn't even show. If it happens, you'll understand. ;)
Are you aware that repaint() can have a rectangle argument? And are you aware that the Graphics object has a clip depicting the area that will be affected by painting? You might use these for your partial painting.Yes and yes. Here is an enumeration of most of the update regions:
enum AoI    // areas of interest
    LUMA_SNAKE, GREY_SNAKE, HUEBORHOOD, BULB_LABEL, LUMA_WEDGE,
    LAST_COLOR, BRIGHTNESS_BOX, INFO_BOX, VERSION,
    COLOR_NAME, EXACT_COLOR, LUMA_BUTTON, LUMA_BARS, GUI_INTENSITY,
    QUANTIZATION_ERROR
}That list doesn't even include the large color intensity wedge to the right, nor the color wheel itself. I have a method that will return a Rectangle for any of the AoI's. One problem is that the wheel is a circle, and a containing rectangle will overlap with some of the other AoI's. I could build an infrastructure to handle this mess one clip region at a time, but I think it would add a lot of unnecessary complexity.
I think the bigger picture is that, though it is now updated to Swing, some of the original 1998 design decisions are no longer relevant. Back then I was running Windows 98 on a single-core processor clocked at significantly less than 1 GHz. You could actually watch the canvas update itself. The color wheel alone fills over 1000 arcs, and the color intensity wedge has over 75 update regions of its own. While kind of interesting to watch, it's not 1998 any more. My multi-core processor runs at over 2 GHz, and my graphic card is way, way beyond anything that existed last century. Full canvas updates probably take less than 0.1 sec, and that is with double-buffering!
So, I think you're right. Let the silly paintComponent() do it's thing unhindered. If I want to track old dots on the wheel, keep an array of Points, remembering maybe the last 10. As a final step in the repainting process, decide how many of those old dots to display, and do it.
Thanks, guys, for being a sounding board.
Oh, I'm moving forward on implementing the color list widget. I've already added a 3rd JPanel, which is a column to the left of the main paint canvas. It will contain 3 GUI items:
1) the color list widget itself, initially sorted by name
2) 3 radio buttons allowing user to resort the list by name, hue, or hex
3) a hex-entry JTextField (which is all that is there at this very moment), allowing exact color request
The color list widget will fill most of the column from the top, followed by the radio buttons, with hex-entry at bottom.
For weeks I had in mind that I wanted a pop-up color list widget. Then you shared your ColorList class, and it was so obvious the list should just be there all the time. :)
-- Rich

Problem with update method

import java.awt.*;
import java.applet.Applet;
public class graphplotter extends Applet
public void init()
repaint();
public void update(Graphics g)
g.drawRect(0,100,100,100);
g.drawLine(50,100,50,200);
g.drawLine(0,150,200,150);
this code above does not draw the rectangle and line
automatically when the applet loads.
how to rectify this.

i used the update method because i wanted to add new images to the existsing background image.if i use the paint method the even the existing backgroung image again has to be painted again.

Which update method to use???

Hi all,
Our client has an average of 1000 sales orders per day.
Which update method will be the best for such a scenario and why?
Please suggest.
Cheers
Jayashree

Obviously Delta Update.
Whenever you have a regular postings in the source system, it is always advised to go for Delta update instead of Full update.
If you go for Full update, day-by-day the number of records will increase and yr data load performance will be badly affected.
In case of Delta, only the changes will be captured and load perofrmance will be consistent.
Regards,
Balaji V

How to make update method permanent once and forever?

Hi,
Every time I get an update to Flash and install it, at the end of the install I get the three update choices of ‘Allow Adobe to install updates (recommended)’, ‘Notify me to install updates’ and ‘Never check for updates (not recommended)’. Every time I choose the second option and every single subsequent time there is an update I have to go through the same procedure again because the first option becomes selected. I do NOT want Adobe to perform automatic updates. Is there a way to set it to notify me of updates but never bug me to change my update method? I have tried changing the setting through the Control Panel but this doesn’t make any difference either. I just want to be notified of updates but not be pestered with those same three options EVERY time.

This answer is NOT working. The line "SilentAutoUpdateEnable=0" is already present. And it still queries for the annoying question, even when asked and answered ad nauseum.
Adobe should in the very next update, as a minimum, make it such, that the chosen value in "Choose your update method:" remains PERMANENT and FOR EVER until the user changes it. It is WILDLY annoying to have to answer this question over and over and over and over and over and over again. Make a new value or something that will be written to the mms.cfg file, that will permanently understand this setting, I Want to update, but I want to know when and how and why, and I especially want to do it myself - Automatic updates can for novice users be nice, until it screws up the entire system - but for super user level or above it is an annoyance, that programs do not respect the answers of the user. It SHOULD ask this question ONCE, and never ever there after - unless the user changes the behaviour, in e.g. the mms.cfg file.
I hope this is crystal clear --- it should be, and I cannot fathom that millions of other users are not annoyed by this popup box ... When i press "DONE" ... it should be EXACTLY THAT - notify me to install updates, BUT NOT to ask it every time what "update method" i want to use -- i've only told you a million times before --- just freaking get the answer and understand it.
Annoyed regards : CyberstormXIII

[svn] 1590: Updating WebService RPC tests that previously used external endpoints at whitemesa . net to now use internal endpoints accessed through Tomcat server on localhost :8400/qa-regress/axis/services/{SERVICE_NAME}?wsdl

Revision: 1590
Author: [email protected]
Date: 2008-05-07 08:49:22 -0700 (Wed, 07 May 2008)
Log Message:
Updating WebService RPC tests that previously used external endpoints at whitemesa.net to now use internal endpoints accessed through Tomcat server on localhost:8400/qa-regress/axis/services/{SERVICE_NAME}?wsdl
Endpoints built from Axis SOAPBuilder tests in Perforce's /depot/axis/xml-axis/java/tests/
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/server-config.wsdd
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/web.xml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/flexunit/src/tests/flexunit/wscl/int erop/SOAPBuilderRound3Import1_WhiteMesaTest.as
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/flexunit/src/tests/flexunit/wscl/int erop/SOAPBuilderRound3Import3_WhiteMesaTest.as
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/flexunit/src/tests/flexunit/wscl/int erop/SOAPBuilderRound3RPCEncoded.as
Added Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/lib/
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/lib/javax_mail.jar
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/lib/qa-services-wm.jar
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/flexunit/src/tests/flexunit/wscl/int erop/SOAPBuilderRound3Compound1.as

Early delta initialization and update methods

Hi gurus
Can we use EDI with "queued delta" as update method?
If yes where we need to do that setting and if no then would you pl tell me which functionality we need to use in infopkg to load delta from R/3 with Queued delta as a update method?
Pl help to understand this.
Thanks

In the 'update' mode in your infopackage, if you see an 'early delta init' option, you can use it for that datasource (for queued or any other delta). This is where you choose to run an 'early delta init'.

"Direct Delta" Update Method - Why need for Collective update

Hi folks,
I have been going through LO Cockpit in detail and read quite extensively about new update methods and still have one doubt.
1)Why there is "Job control" for "Direct Delta" Update method in LO Cockpit?.
If I understand Direct Delta correctly, Application data is directly posted to Delta Queue by SAP Update management using V1 and when the Delta request comes from BW it is read from the Delta queue. So...
2)why bother about collective run and
3)where exactly are we going to collect from - there is no intermediate storage like extraction Q or update tables?
One more question. I noticed that Delta queue is a stopped qRFC. what does this mean?

Hi Jay,
These questions have been answered by Roberto Negro in full detail of his 3 episode Blog...
Please read his blog.
Click Weblogs above and search for Roberto Negro.
--Jkyle

[svn:osmf:] 13003: Update some unit tests to reflect that LayoutContextSprite now returns 0 ( not NaN) for uninitialized values to be consistent with ViewTrait.

Revision: 13003
Revision: 13003
Author:   [email protected]
Date:     2009-12-16 13:12:08 -0800 (Wed, 16 Dec 2009)
Log Message:
Update some unit tests to reflect that LayoutContextSprite now returns 0 (not NaN) for uninitialized values to be consistent with ViewTrait.
Modified Paths:
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/layout/TestLayoutContextSprite.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/proxies/TestListenerProxyElementAsSu bclass.as

Revision: 13003
Revision: 13003
Author:   [email protected]
Date:     2009-12-16 13:12:08 -0800 (Wed, 16 Dec 2009)
Log Message:
Update some unit tests to reflect that LayoutContextSprite now returns 0 (not NaN) for uninitialized values to be consistent with ViewTrait.
Modified Paths:
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/layout/TestLayoutContextSprite.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/proxies/TestListenerProxyElementAsSu bclass.as

[svn:osmf:] 14261: Updated DRM unit tests to work with code review feedback .

Revision: 14261
Revision: 14261
Author:   [email protected]
Date:     2010-02-18 14:15:23 -0800 (Thu, 18 Feb 2010)
Log Message:
Updated DRM unit tests to work with code review feedback.
Modified Paths:
    osmf/trunk/framework/OSMFTest/org/osmf/elements/TestParallelElementWithDRMTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/TestSerialElementWithDRMTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/traits/TestDRMTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/utils/DynamicDRMTrait.as

Hello Alex,
I don't have an answer for you.
But, can you try to use http://drmtest2.adobe.com:8080/Content/anonymous.f4v with locally hosted OSMF player? This content doens't require user/pass info.
I'm wondering that Google TV's flash player doesn't support prompt dialog.
http://drmtest2.adobe.com/AccessPlayer/player.html requires flash player 11. That's why it won't be loaded with flash player 10.x.
Thanks,
-- Hiroshi

Invocation of update method on test pane of workshop fails

Similar Messages

Maybe you are looking for