Update/restore not working properly

My wife and I have been trying to get her iPhone 4S to update to the latest version of iOS. The problem is that the software update server appears to be running at the approximate speed of a glacier -- I have been trying to download the update (a 1.66 GB download) for the last three hours, and every time I do it downloads at about 30 KB per second and tells me there is still 24 to 25 hours remaining. I have checked and rechecked, and there is NO possibility of a bottleneck on my end -- no interference from firewalls or antivirus software -- but in spite of this the download always crashes with an Error 9006, WHICH IT SHOULD NOT BE DOING.
Are the servers just completely screwed tonight? Is there a solution I haven't figured out yet? I assure you, I've tried about everything that can be tried.

I would suggest that you hook up the phone to iTunes on the computer you sync with and update that way. It is faster and requires less memory to do the update.
Cheers,
GB

Similar Messages

IPOD Software Updater- "Restore" not working

The IPOD software updater will not allow me to restore my Nano.
Both the update and restore buttons are not "active". The updater prompts me to plug in my Nano and automatically attempts to update my Nano which isn't necessary since there's no new update.
This caused the "Do not disconnect" message to appear for a long time until I turned it off.
Any thoughts, suggestions...would be very much appreciated!
Thanks-

Fixed! I had the same issue and have fixed it... for now!
Let me go into the details...
My wife and I just received our new Nanos. Her's has been exhibiting strange behaviour so I have tried to restore.
On her latop, the latest iPod Updater did not at first 'see' the Nano whereas on my laptop, it sees the Nano and starts to restore then stops when the progress bar gets to the 'd' of "iPod". I have had to force quit and try again and each time it gets fo far and stops.
By putting the Nano into Disk Mode, I can get my wife's laptop to "see" the Nano and, once again, it stalled at exactly the same spot. I force quit the update and tried and again... and it worked this time!
The only difference this time was that I was holding the Nano in my hand. I can see no reason why this would be relevant unless the connector had been ever so slighty lose, though this is a long shot.
So, I am back to having 2 functioning Nanos... for now!
Best Wishes
Mark Townsend

Adobe desktop app updater is not working properly

Trying to update adobe desktop app but its giving me this popup
accept button ( which is in right side) is not working. When I press cancle button (left side button) getting another popup
I have no idea what to do...!!

Well... that says that you must use an ADMINISTRATOR computer account, not a simple user account
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq may help

IOS 6 update = Speaker not working properly

My speaker was fine and I have no reason to believe there are any hardware issues. As soon as I updated my iOS 5.1.1 to the new iOS 6 it stopped working and now I can't listen to music or watch videos on my iPhone unless I insert a headphone!
What's happened and how can this be resolved?

Experiencing similar problems with both me and my wife's iPhone 4S's. My phone's speaker was muffled until I played a song, then it seemed to work ok. My wife's will not work at all except for when you adjust sound settings (e.g. changing the alert sound). Then it works only during the "test" and reverts back to its broken state.
P.S. And yes, I've rebooted both numerous times. This has no obvious affect.

After new update keypad not working properly..slow have to wait for letters to fill in. Any thoughts

After downloading new OS key pad not functioning
Properly. Type in message and it takes several seconds to populate.
Anyone else having same problem or solution?

There are many other posts here on the forum about this same issue...use the SEARCH feature and I'm sure you'll locate your answer.

Yosemite 10.10.2 Update - Trackpad Not Working Properly

MBP OSX Yosemite 10.10.2
The following trackpad gestures no longer working since latest update - four finger mission control, app expose, launchpad, show desktop, two finger scroll in safari (although works in chrome).
The same symptoms on BT trackpad as on the internal trackpad.
All basic troubleshooting tried - reboot, turned all the gestures off and reboot etc etc
Please help

Go step by step and test.
1. Shut down the computer.
    Clean the trackpad with moist not wet microfiber cloth.
    System Preferences > Point & Click
    Try turning off three finger dragging and then turning it on after testing.
2. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
3. Reset PRAM:   http://support.apple.com/kb/PH14222
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Close all windows and quit all applications.
    Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
    Select Disk Utility from the drop down. When the Disk utility window opens up,
    select Macintosh HD, then First Aid.
    Click Repair Disk    Section: "Try Disk Utility" Permissions button.
    Ignore the time remaining estimate.
    Last 1 minute may take longer.

Photoshop after Latest CC updates is not working properly.

I just installed CC Photoshop's latest update and now I'm totally out of commision. Unable to work with any of my previous 3d projects. They appear to load, but as soon as you select any object, it falls apart. Objects go flat and rearrannged. When createing new objects, such as 3D extrusion fonts, they are flat. Cannot distinquich the front from the sides. There are no shadows. When you click an object, the background dissappears. When you try to move an object, it stutters and takes several seconds before the object moves. In regular Photoshop when editing a previous projectl, for example, when setting a paint brush on a given area, an error message pops up says "Could not use the brush tool because the current time is outside the range for the target layer. "Time"??? What is going on. Does anyone know if I can uninstall and revert back to a previous project. I've got work to do. This is devesating!! The list goes on. When trying to create a depth map from a plane object, you'll get an unknown error and cannot get out of it unless you kill it from the Task Manager. Please help!

I would think you would first check to see if your video card has driver updates. Check the card maker's website to be very sure. Upgrade to the most current.
If doing that does not fix it, then try this:
Dial back your GPU settings (Preferences > Performance) from Advanced to Basic.
If no luck, downgrade PS, if only to get your work done.
You can download the Photoshop CC installer direct from ProDesign Tools.
http://prodesigntools.com/adobe-cc-direct-download-links.html
Follow the instructions carefully or the download link won't work.
Uninstall your 14.2 version and using the downloaded CC installer, you should have 14.0.0
I never did this before, but under Help > Updates make sure you don't update past 14.1.2

Edit/update function not working properly on visual basic 2012

help, i'm working on a update function on my aplication program using visual studio ultimate 2012 VB.
after i fixed the error on my coding, i debug the program with f5. but, when i tried to update the data on the datagridview it doesn't change even thought the messagebox "data has been updated" show up.
how do i fix this problem?
here is the coding for update function:
form1:
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
ClassSiswa.ubahdata(New SqlConnection, (txt_nis.Text), (txt_nisn.Text), (txt_namasiswa.Text), (cmb_kelaminsiswa.Text), (txt_kotalahir.Text), (DTP_siswa.Text), (cmb_agamasiswa.Text), (txt_beratsiswa.Text), (txt_tinggi_badan.Text))
datagridview()
End Sub
Private Sub UpdateDataSiswa()
ClassSiswa.Nis = txt_nis.Text
ClassSiswa.Nisn = txt_nisn.Text
ClassSiswa.Nama_Siswa = txt_namasiswa.Text
ClassSiswa.Tanggal_Lahir = DTP_siswa.Text
ClassSiswa.Jenis_Kelamin = cmb_kelaminsiswa.Text
ClassSiswa.Kota_Lahir = txt_kotalahir.Text
ClassSiswa.Agama = cmb_agamasiswa.Text
ClassSiswa.Tinggi_Badan = txt_tinggi_badan.Text
ClassSiswa.Berat_Badan = txt_beratsiswa.Text
ClassSiswa.Updatesiswa(ClassSiswa.opencon, (txt_nis.Text))
datagridview()
End Sub
classSiswa:
Public Shared Sub ubahdata(ByVal _cn As SqlClient.SqlConnection, ByVal _Nis As String, ByVal _Nisn As String, ByVal _nama_siswa As String, ByVal _jenis_kelamin As String, ByVal _kota_lahir As String, ByVal _tanggal_lahir As String, ByVal _agama As String, ByVal _berat_badan As String, ByVal tinggi_badan As String)
Dim sql As New SqlClient.SqlCommand
sql.Connection = _cn
sql.CommandType = CommandType.Text
sql.CommandText = "update siswa set nis='" & Nis & "',nisn='" & Nisn & "',nama_siswa='" & Nama_Siswa & "',jenis_kelamin='" & Jenis_Kelamin & "' ,kota_lahir='" & Kota_Lahir & "',tanggal_lahir='" & Tanggal_Lahir & "'agama='" & Agama & "'berat_badan='" & Berat_Badan & "',tinggi_badan='" & tinggi_badan & "'"
MessageBox.Show(" Data Telah Diupdate")
ClassSiswa.closecon()
End Sub
Public Shared Sub Updatesiswa(ByVal _Cn As SqlClient.SqlConnection, ByVal _nis As String)
Dim sql As SqlClient.SqlCommand
sql = New SqlClient.SqlCommand
sql.Connection = _Cn
sql.CommandType = CommandType.Text
sql.CommandText = "Update siswa Set nis = '" & Nis & "', nisn = '" & Nisn & "' where nis = '" & _nis & "'"
sql.ExecuteNonQuery()
End Sub

Hello,
A DataGridView knows nothing about the updates done as shown above, you need to update any rows that have changed yourself. For example. lets say I loaded data from a database table into a DataTable, create a BindingSource and assign that DataTable as the
DataSource for the BindingSource. The BindingSource becomes the DataSource of the DataGridView so now when you moved up/down rows in the DataGridView you are changing position in the BindingSource and can read this data via BindingSource.Current by casting
Current to a DataRowView then access the Row property with Field(Of T or SetField(Of T. Couple this will logic to locate rows that may not be the current row and we still can use SetField(Of T)(Col,Value) to update data in the BindingSource which is then immediately
reflected in the DataGridView.
The following is for MS-Access but the same logic applies for SQL-Server database via SqlClient data provider rather than
OleDb data provider.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions.

RH_INSERT_INFTY in update mode not working properly

I am calling the FM RH_INSERT_INFTY using IN UPDATE TASK in my Inbound part of my IDOC.
The IDOC is getting generated successfully in the Outbound part but getting errorred out in the Inbound side.
I have checked for the attributes of the FM where the type of FM is NORMAL FUNCTION MODULE.
any pointers on this will be of immense help to me.

This is the output of journalctl --all
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Activating service name='org.gnome.Terminal'
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Successfully activated service 'org.gnome.Terminal'
May 12 20:55:26 egidiolaptop gnome-session[19563]: 1431456926458 addons.update-checker WARN Update manifest for {972ce4c6-7e08-4474-a285-3208198ce6fd} did not contain an updates property
May 12 20:56:03 egidiolaptop systemd[19544]: [/home/egidio/.config/systemd/user/googledrive.service:2] Unknown lvalue 'Type' in section 'Unit'
May 12 20:56:03 egidiolaptop systemd[19544]: Cannot add dependency job for unit network-online.target, ignoring: Unit network-online.target failed to load: No such file or directory.
May 12 20:56:03 egidiolaptop systemd[19544]: Created slice -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Started Google Drive mount.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting Google Drive mount...
May 12 20:56:03 egidiolaptop fusermount[20547]: /usr/bin/fusermount: failed to unmount /home/egidio/Google Drive: Device or resource busy
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service: control process exited, code=exited status=1
May 12 20:56:03 egidiolaptop systemd[19544]: Unit googledrive.service entered failed state.
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service failed.

Recent Blackberry update - clock not working properly, nor is Blackberry app worldH

Dear all
Can anyone advise please - my Curve 8520 has just received an update......however, since doing so, I am unable to set the alarm on my clock....and blackberry app world keeps crashing on me.
Has anyone else had this.....can anyone help please....it's very frustrating.
Many thanks in anticipation
Wendy

This is the first I have seen of that issue.
So, open your Clock > Menu key > Set Alarm. When you click on Set Alarm, nothing happens... the device does not respond and no alarm options appear?
I'd say do another reboot: With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
Let us know.
What is your Operating System loaded to your device?
Look at Options > About, third line down beginning with a "v.5.xxx"
What is yours?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Master License File update - apps not working properly

All:
Believe it or not, I am replacing an expired license with the master license file on a 9.2 installation. Go figure...
Anyway, I have searched for docs on what needs to be reconfigured and how after replacing the old file and have come up empty. Have run config tool to update Deployment id for both Essbase and Planning but still getting error message in Planning indicating an issue with the license and when opening HBR rules, that it cannot connect to Essbase due to licensing issue. Tried re-registering with Shared Services for both Planning and Essbase, still getting the same errors and log files are not providing much by way of clues.
Other info: License server logs shows no errors. All apps starting successfully.
Does anyone have a doc or experience with this that they can share with me? Do I need to deregister apps? Redeploy the app servers?
K

There are no virus for an iphone unless it is jailbroken.
For the message - close out of the app, then double tap the home button and completely close out of the app.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
this reset, might help with your other issues too.

Update Installation not working properly.

I had to send my lenovo back to get fixed 1 month ago.
I get it back and adobe reader wants to install an update automatically
It doesn't even give me a choice, which pisses me off.
The reader program then decides to restart, automatically. It went through step 1, then on step 2 of 7 it STOPPED installing.
It just STALLED and has been "stuck" on 2 of 7 for 2 hours now.
I WILL be forced to turn off my machine.
WHY the hell did this happen? If it screws up my OS Adobe needs to fix it.
Oh and I've been waiting on hold for your tech support for over an hour and a half now. The wait time was supposedly 30 minutes.
I'm pissed.

It would seem like the Windows Updates are being installed on your machine. Step 1/2/...7 of 7 wqoudl indicate that Windows Update are bineg installed cause non of the Adobe Reader Updates display information in that fashion.
Also, can you please recheck the setting indicated in the Updater Preferences to see what is the Update Mode set on your system for the Reader application. You can check the same by clicking on Edit > Preferences > Updater.

Samsung software update, email not working properly

My Samsung software updated yesterday. Now, when I am outside my 4G network, I can no longer send or receive emails. What setting change am I overlooking?

Let's troubleshoot a little further fscarbrogh. The reason I asked if you are able to access the internet, is to ensure you have a data connection. A data connection is required in order for your email to sync to your device successfully. Are you using a third party app to retrieve your emails? Have you tried to remove and re-add your email account?
Thank You,
MichelleS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

TS3595 I updated my itunes and restored my 2nd gen itouch, now my itouch does not work properly (keeps freezing). how do i fix this?

I updated my itunes (latest verion out as of nov/20/2012) and restored my 2nd gen itouch, now my itouch does not work properly (keeps freezing). how do i fix this?

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

After updating iso 6.1.3 in my 4s my phone is not working properly

After updating iso 6.1.3 my 4s is not working properly the main problem is touch is not working properly and battery problem also there pls anyone have some solution

IOS 6 has had a lot of issues to date. I have a possible solution to offer but I cannot be sure it will work. Two ideas.
1. Reset the phone: hold the lock button and home button in at the same time for 10 seconds. This does nit erase anything, it's basically like rebooting a computer.
2. Factory reset: Hook up to a computer and go to iTunes. Sync the phone (if possible). Once synced, in the summary screen select factory reset (or may be another name, I'm working from memory) it's right beside update software. This will completely reset the phone, you will need to restore it after the reset it complete. I don't know if this will help you, but it may. I hope you can fix it, good luck!!!

Update/restore not working properly

Similar Messages

Maybe you are looking for