IP Report not input enabled

Hi Experts,
I have done the below activities to make an IP report for manual planning.
1)Creation of real time cube and made is available for planning by setting.
2)Created aggregation level on around 7Characteristics & 4Key figures.
3)Created a Bex query with all the 11 infoobjects as present in the aggregation level.
4)Made the query to open in change mode.
5)All 4 key figures are ready for input.
6)Created a WAD template with analysis grid and its source is BEx query.
7)Infocube in planning mode.
The planning sequence & planning functions are running as desired when executed.
However, even after all the above required setting when I run the WAD the key figures aren't coming as editable.
I every now and then get these 2 below errors in WAD.
'014 Transformer exception while transforming BEx Web templates'
'171 Unable to generate history entry'
However, when I ignore the messages I can still work properly on WAD and have completed the IP report
Also I checked for disaggregation option of key figures setting in Bex query under planning tab.
There I am getting below error.
'Not supported by server'
I learnt that this disaggregation property needs to be enabled only if manual planning is based on totals(e.g. result role) and not on individual rows of characteristics.
I have just 4 records in the cube which are unique so every line in the report is unique.
Even though all the criteria's are met I am still not able to get IP report with manual editing option.
Please provide your valuable inputs.

Hi Neeraj,
you don't need characteristic relationships.
Key figures usually have a currency or unit characteristic. Using such a key figure in an aggregation level requires the corresponding currency or unit characteristic to be included in the aggregation level since the key figure alone makes no sense.
Create the following query as a simple test:
- put all key figures of the aggregation level in the data columns of the query
- drill down all characteristics in the rows of the query
Are now some cells input-ready?
If yes, then some of the requirements I mentioned above were not met by your old query.
Regards,
Gregor
Edited by: Gregor Dieckmann on Jan 27, 2012 6:09 PM

Similar Messages

Object variable not set (Error 91) in Input Enabled query

Hello,
I'm having the following issue. I have created an input enabled query and included it in a planning workbook. Every time I open the workbook or query, and I got to an input enabled cell, I get the error below:
Object variable not set (Error 91)
This client has not used planning workbooks before. The system is on 7.10 SP10 for Bex Analyzer and SAP Gui 7.10 Patch Level 13.
I'm not finding any relevant so far in SDN. Any help anyone can provide is greatly appreciated.
Thanks,
Senthil

Hello,
Just wanted to let you all know that this issue has been resolved after updating my SAP Gui to 7.2 Patch Level 4 (Patch Level 5 was causing some other issues so I decided to stay at Level 4).
Thanks,
Senthil

Custom field in Bid Quote not editable/input enabled/changable

Hai All,
    In the SRM Surrogate Bidding process , PO is generated from the Quotation which corresponds to the bid which has been accepted. Now before generating the PO we need to pass the Ordering vendor address information from the Quotation back to the PO. We added a custom field to the Quotation following Note 672960 - User-defined fields 2 and it is being added to the BASIC DATA TAB in the Header data of the Quotation, but we are not able to enter any values since it is in display mode.
   We then referred Note 809630 - Customer field in bid invitation and bid - How does it work? ( after referring Notes 458591 and 672960), and found that we need to implement the methods MODIFY_SCREEN and MODIFY_MODE_QUOT of the BADI BBP_CUF_BADI_2.
         The MODIFY_SCREEN method works fine, but the MODIFY_MODE_QUOT is not getting called during the Bidding process. MODIFY_MODE_QUOT is already existing in the system as per the Note 822424 - CUF. Customer fields cannot be changed in the bid . Also Function-Pool SAPLBBP_PDH_CUF does not have any calls to the method MODIFY_MODE_QUOT but it has calls for the other 3 methods present in that BADI.
       We would like to know (1) How we can make this MODIFY_MODE_QUOT work? (2) And if it is working, Will MODIFY_MODE_QUOT along with MODIFY_SCREEN make the field in the Quotation Input enabled, and/or (3) Is there any other way by which we could make the field Input enabled, for the Users to enter some values, before they Click the Generate PO button.
Please help.
Thanks,
Ghanesh

Hi Ghanesh and SRM experts,
I went through your link mentioned below and I have the EXACT same issue. I am using SRM 5.5 and I have added a custom field to the quotation item level. I am unable to make this field editable no matter what I do .
1) I have gone through all notes mentioned in your scrap and I have implemented them all .
2) I have added the custom field to INCL_EEW_PD_ITEM_CSF_QUOT and INCL_EEW_PD_ITEM_CSF.
3) I have also implemented BADI BBP_CUF_BADI_2 and I confirm that the method MODIFY_MODE_QUOT is never getting called. MODIFY_SCREEN is getting called , and the value of the flag ET_FIELDS-XINPUT is always 'X'. Still the quotation field is display only.
Your post is dated a few months back. If you have solved this problem could you please let me know how.
Help from anyone who anything about the above will be appreciated.
Thank You .
Regards,
Ajali Sen

Enabled Homepage Reports Not Appearing in "Available Sections" picklist

Good afternoon,
I have created numerous custom homepage reports and have enabled them to be added to homepage layouts. However, when building a new homepage layout, not all of the reports that have been enabled are visible in the "Available Sections" picklist. I cannot figure out why because all of the reports are listed in the "My Homepage Custom Reports" section. Is there a limit to the number of reports that will appear in the "Available Sections" picklist?
I'm stumped on this one. Has anyone encountered this problem? If so, is there a solution or a possible reason this is happening?
Thanks in advance!
Ryan

when you set up the reports did you select home page in the drop down or did some of them get set a detail page reports? that would be my only suggestion.
cheers
alex

Enabling report not working

Recently I had a report that quit refreshing, it didn't quite indicate why, so I deleted the document, re-added it and now am trying to enable it in Power BI. I've tried deleting and re-adding it several times. I've enabled other reports,
and they enable successfully.
I get this message:
Couldn't enable report
Read about making reports smaller.
Sorry, something went wrong.
This report may contain other unsupported features.
Transaction ID:
ACF1329B-6AA7-045A-5955-394F0D0514B2
Transaction Date:
11/06/2014 04:07:11 PM (UTC)
Something interesting, The "Read about making reports smaller" and the "This report may contain other unsupported features" was not in the error, but showed up when copying/pasting...
The report is 9.7MB, and PowerBI supports up to 250MB, so I don't understand the issue with the "making smaller". Also what "unsupported" features? The report has been working fine before, it just recently quit working and had
no updates other than data refreshing.

Hi Chris,
Did you ever get this working? If you think it is an issue with the workbook and the book is something you can share, send it to me and we will take a look.
[email protected]
Brad Syputa, Microsoft Power BI This posting is provided "AS IS" with no warranties.

Input Enabled Query - Web Template - Not able to change the key figure.

Hello IP Gurus,
This is a simple question .
I have input enabled query and for all the KF's , I selected the radio button - data can be changed using user entries or planning functions , Equal Distribution and No disagrregation.
I attached the query to a web template.
When I execute the template I am not able to enter or change the key figures.
Do I have to use any planning function to do that in the web template or I am missing any configuration . Please let me know how to change or enter the key figures
Thanks
Senthil

HI Senthil,
Please ensure that u have enabled the property " start Query in changed Mode". This u can find it in the query properties under the advanced tab.
For the Input readiness this alone is not enough.You have to use all the charecteristics that u have in the multiprovider or the aggregation level over which the query is built.
regards.
Shafi.

Warning: No new rows or columns because the axis is not input-ready

Hello all,
I have a planning application that plan against multiple years. This is done using a query that uses an analysis web item with its properties set to enable multiple new rows e.g. 2 new rows. Right now I have an issue whereby those 2 new rows will only appear if I restrict the report to a single year and if I were to select 2 or more years I get this warning message u201CNo new rows or columns because the axis is not input-readyu201D and those 2 rows will disappear.
Anybody have any idea whatu2019s going on? Thanks.

Hi,
note 1149346 explains when new lines are possible:
https://service.sap.com/sap/support/notes/1149346
Regards,
Gregor

Report without input screen working diffrently in debugging and background

hai,frds
I have one report without input-screen,But it is working diffrently in background and debugger.
please help me for this and i am bapi inside the program to create entries.but
if its in debugging it is crates corectly but if is in back ground it not working cooetly bapi working one time only.
plese help me for this.
Moderator Message: Too much of text-speak/sms-speak. Thread Locked. Write complete words and check their spellings using the Spell-Check tool in the editor here.
Edited by: kishan P on Jan 19, 2012 4:40 PM

HI,
In SM37,Put the cursor on the Job, Type 'JDBG' in Command line and press Enter.
You can able to debug your Background job now.
Find out where it is going wrong.....
how to debug background job

Linux: Kernel Preemption, To Enable Or Not To Enable

The default 2.6.4 Arch Linux kernel .config has 'CONFIG_PREEMPT=y'.
Not everyone has been happy with kernel preemption, however. There is an interesting discussion of this under the title "Linux: Kernel Preemption, To Enable Or Not To Enable at http://kerneltrap.org/node/view/2702
The text of the article is repeated here:
"A recent bug report on the lkml complained of significant performance degradation from enabling CONFIG_PREEMPT, kernel preemption. 2.6 kernel maintainer Andrew Morton [interview] pointed out that such degradation from enabling kernel preemption is not normal, instead likely from it triggering a bug. However, an interesting conversation on the merits of kernel preemption followed.
Andrea Arcangeli, author of the 2.4 virtual memory subsystem, bluntly suggested, "keep preempt turned off always, it's useless. Preempt just wastes cpu with tons of branches in fast paths that should take one cycle instead." Andrew Morton noted, "preempt is overrated." However, he went on to point out that kernel preemption has been very useful in detecting locking bugs. He added, "it has been demonstrated that preempt improves the average latency. But not worst-case, because those paths tend to be under spinlock."
Robert Love [interview] replied directly to Andrea's comments saying, "I think you are really blowing the overhead of kernel preemption out of proportion," going on to agree with Andrew's statements. He further explained:
"I also feel you underestimate the improvements kernel preemption gives. Yes, the absolute worst case latency probably remains because it tends to occur under lock (although, it is now easier to pinpoint that latency and work some magic on the locks). But the variance of the latency goes way down, too. We smooth out the curve. And these are differences that matter."
There is more discussion and feedback with the article (including the original bug report).

I like preemption. it the "democracy" heaven of processes and threads. This post was interesting, but the point is this bug..?
if the bug is found, who can say that preemption in the kernel is not a good idea?
thanks for posting though ;P

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

Report not generating with blob

SO I was trying to create a report to insert an image. I saw and followed the following resource: http://blogs.oracle.com/xmlpublisher/2006/05/inserting_blobs_into_your_repo.html
In the template builder for MSWord, where I grab the XML data containing the Base64 code for the image, the output is all there. - so yes the actual query grabs the base 64 version of the image, as per http://sergekoganovitsch.wordpress.com/2009/05/02/blob-base64-encoding/
Now the situation is there is a temporary table that stores all the fields, and the image, along with the apex session_id. So the report query looks like this:
SELECT
p.full_name
, blob_to_clob_base64(p_photo => p.photo) photo
FROM profiles_tmp p
WHERE p.session_id = :APP_SESSIONSo.. first to make sure it was all working properly, I created another report query specifying a specific session id in the where clause that I know contains a photo - all works fine. However, when I apply the layout to the query above, and test it - it comes out containing no pages. Even if I test it when going through the application where there would be a valid session id, still no pages.
I have tried changing :APP_SESSION to v('APP_SESSION') and to_number(:APP_SESSION) to no avail.
If i remove the image bit, and just have the field as <?PHOTO?> , it outputs the base64 contents fine - but obviously, I want the actual image in the report, not the base64 code.
IF i open the pdf file in a text editor, I get the following:
%PDF-1.4
1 0 obj
<<
/Type /Catalog
/Pages 3 0 R
>>
endobj
2 0 obj
<<
/Type /Info
/Producer (Oracle BI Publisher 10.1.3.4.1)
>>
endobj
3 0 obj
<<
/Type /Pages
/Kids [
/Count 0
>>
endobj
4 0 obj
<<
/ProcSet [ /PDF /Text ]
>>
endobj
xref
0 5
0000000000 65535 f
0000000010 00000 n
0000000065 00000 n
0000000147 00000 n
0000000208 00000 n
trailer
<<
/Size 5
/Root 1 0 R
/Info 2 0 R
/ID [<e45d94e9f08bf009170c54aabd4c051c><e45d94e9f08bf009170c54aabd4c051c>]
>>
startxref
258
%%EOF
<PRE>Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.</PRE></BODY></HTML>The DBA enabled trace and I have that log file.. but don't really know what I am looking for :-/
It doesnt really make much sense to me, since when running it in the application there is a valid session id and it doesnt work. but if i explicitly specify the session id in the report query it does work.
Has anyone experienced said problem or can provide any useful guidance?
Thanks,
Trent

Found out this was a limitation to do with apex <= 3.x .. see http://marcsewtz.blogspot.com/2008/06/one-question-about-pdf-printing-feature.html

How to get the value entered in input enabled field of a list output?

Hi all,
I am developing a program to display list with two input enabled fields . After users enetered the values into these fields I need to do some calculations based on these values and modify the value of another field in the list.
But i couldn't have an idea how to read the values after users enter into these fields.
Please help me on solving this problem? If possible please provide the sample code.
Thanks,
Aravind.

You can enable disable screen fields in at selection screen output event.
And by using loop at screen.
And for changing the values you can do in initialization event.
I Hope you are doing these in Reports.

How to create an input enabled query with Integrated Planning

Hello experts. I have created an aggregation level in IP and I am trying to create an input enabled query based on this aggregation level. My problem is in the properties. On the query properties planning tab the Start query in change mode is grayed out and I am unable to select it. Also on all the chararteristic properties on the planning tab, the planning settings are all grayed out as well and the No budgeting is selected. There is a red exclamation here that says 'function not supported by server' Any ideas? Points will be awarded.
Peter

hi,
go through this help for the procedure...
[http://help.sap.com/saphelp_nw04s/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm]
hope it helps...

Input enabled cell to enter text

Hi All,
I need to create a query which has an input enabled column where user can enter text up to 250 characters. Is this possible only using aggregation level? Is it possible to declare a characteristic to show up as a column and input enabled? I am thinking only key figures can be input enabled and they can accept only numbers but not characters.
I am new to BI Planning concept. Please let me know the best solution for my requirement.
Thanks in Advance!
Sonali.

Hi,
Please take a look in the following thread.
Re: Input Ready query text field
Hope this helps.

Bursting with Report's input parameters

Hi experts,
I am running BIP bursting feature, and this is working fine. Now, my customer is needing to enabling bursting feature by passing report´s input parameters. It is possible to set the bursting sql query to accept report´s input parameters?. If yes, how can I get that?.
I am working with BI Publisher 10.1.3.4.1
Regards,
Edited by: Farid Leonardo on 20/09/2012 14:48

Hi
You can add parameters to the bursting query
Please see if this helps
http://docs.oracle.com/cd/E24001_01/bi.1111/e18862/T527073T555155.htm#T568844

IP Report not input enabled

Similar Messages

Maybe you are looking for