IPad functions locked for International users - Apps

Applications on my new iPad do not work - it shows there are 'App' updates for me to download but if I click this icon on iPad I get 'Cannot connect to App Store, The App Store is not supported in this country' http://twitpic.com/1dwshs http://twitpic.com/1dwtsv
Using iBook & other apps was a fundamental reason for buying my IPad - why am I locked out because I'm in AUS?
How can this be resolved?

Exactly. The iPad has not been released internationally so there will not be support at this time. However, I do know people who just purchased iPads and are using them overseas. The trick is the have an American credit card and register your iTunes account in the U.S. iTunes store. That way no matter where you are in the world, your account will be an American iTunes account and you will have unlimited access to what the U.S. store offers.
Hope that helped.

Similar Messages

  • Maximum message size for internal users

    Hi,
    Is it possible to configure a maximum message size for internal users and also create exceptions?
    The templates available in Transport Rules only allow for "when size of any attachment is greater or equal". This is not ideal as users can add 50 X 1MB attachaments to an email etc.
    Configuring Transport settings or Receive Connectors do not allow for exceptions.
    Thank you.

    Hi Prakash,
    Thanks for the link to the thread. The AD site link configuration is valid but does not account for the required exceptions. E.g User A can send unlimited size message to User B but not to User C.
    The thread also mentions the Transport Rule configuration stated in my original post but that configuration has one major flaw. Users can circumvent the control by splitting attachments.

  • HT4113 So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.

    So I got the ipad for christmas, turned it on & it worked fine. Later I entered a passcode. Now I can remember the passcode & the ipad is locked for 60 mins. The ipad was never configured to a computer at the beginning. someone help.

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.

  • How Lync desktop sharing works for internal users

    Hi,
    How Lync desktop sharing,  Aplication sharing & A/v conferencing works Internally ?
    is it uses Webconfrencing Edge server & A/V Conf Edge server for internal users also...
    I have confusion on this please help me and guide me how to deploy internally.
    does it works with edge server internally if yes how ?
    Thanks !!!

    No internal to internal conferencing, A\V and desktop share does not use the Edge Server. This is all handled by the Front End Server\s.
    For assistance on deploying please refer to http://gallery.technet.microsoft.com/Lync-Server-2012-9d6fe954
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Lync Sorted blog

  • Shop configuration for internal users

    Hi SDN,
    We are using ecommerce 7.0 for SAP ECC 6.0.
    I've seen at the shopadmin that there is a possibility to configure an eshop for internal users. There its possible to create a scenario "B2B For Internal Users".
    So in my point of view. I have to define a b2b configuration at XCM. And then i should see that new scenario after login.
    But that works abolutely not. The shop with scenario "B2B For Internal Users" is not displayed. I only see all the configurations of type "Internet Sales B2B".
    Why?? both this scenarios are B2B scenarios. So both has to been displayed?
    How to configure a shop for internal users?
    One more point which i understand not... Why is this configuration for internal users a B2B scenario and not a BOB?
    The internal user has to select the customer...so thats the same like a BOB shop??
    Please explain me that things What im understanding wrong here?
    Thanks and best regards,
    Toni

    Hi SDN,
    We are using ecommerce 7.0 for SAP ECC 6.0.
    I've seen at the shopadmin that there is a possibility to configure an eshop for internal users. There its possible to create a scenario "B2B For Internal Users".
    So in my point of view. I have to define a b2b configuration at XCM. And then i should see that new scenario after login.
    But that works abolutely not. The shop with scenario "B2B For Internal Users" is not displayed. I only see all the configurations of type "Internet Sales B2B".
    Why?? both this scenarios are B2B scenarios. So both has to been displayed?
    How to configure a shop for internal users?
    One more point which i understand not... Why is this configuration for internal users a B2B scenario and not a BOB?
    The internal user has to select the customer...so thats the same like a BOB shop??
    Please explain me that things What im understanding wrong here?
    Thanks and best regards,
    Toni

  • Endeca : multi invoice pay throwing correct error for internal user but it is failing to throw the same error for external user

    Hi,
    1) Internal User expected exception:
    Exception: Payments,apply credits,disputes and print are not supported when multiple customer/currency transactions are selected
    2) External User is throwing below error instead of throwing above exception.
    Error
      You are trying to access a page that is no longer active.
      The referring page may have come from a previous session. Please select Home
       to proceed.
    found this MACCHECK from fnd logs of external user payment.
    MACCHECK: . Parameter failing validation is :mode. The parameter mode with value MultiPay could not be recognized as part of Server's response on the previous request.  Incoming URL is : /OA_HTML/OA.jsp?page=/oracle/apps/ar/irec/endeca/webui/EndecaDummyPG . Current URL is : /OA_HTML/OA.jsp?page=/oracle/apps/ar/irec/endeca/webui/OIREndecaCustHomePG&akRegionApplicationId=222&_ti=1125493452&oapc=10&retainAM=Y&addBreadCrumb=N&oas=6-LL4ndIUFLX-2zjQAQD6A.. . Referer URL is : https://<hostname>:4443/endeca/web/ar/customer?doAsUserLanguageId=en_US&languageId=en_US . HTTP Request Method is : POST
    can someone please help.
    Thanks,
    RRS

    Well, I compared my classpath between my windows batch file and the
    makefile (that comes with the samples installation) on Solaris and realized
    that I am using different sets of jars.
    So, I removed the extra jars from the makefile to narrow down the
    problem. If I remove the /opt/SUNWam/lib/servlet.jar from the makefile,
    I can reproduce this problem on the Solaris box as well.
    When I include this servlet.jar on my windows machine the program works!
    Only jars I have in my classpath are amclientsdk.jar and servlet.jar which
    I have copied from my installation (/opt/SUNWam/lib) on the Solaris box.
    Just the same way, by copying the am_services.jar, saaj-api.jar, and jaxm-api.jar,
    from the Solarix box to the windows machine,
    I am also able to pull the assertions from the Access Manager.
    I installed Sun Java Enterprise System 2005Q1 on a Solaris 10 machine.
    During the installation, I configured to install the Access Manager
    in Sun Application Server.
    Why do I need to have different set of jars on the windows machine
    for the Access Manager client SDK ?
    Could you please point me to a download link where I could download
    the correct Windows Access Manager Client SDK for
    Sun Java System Access Manager 6.0 (Sun JES 2005Q1)?
    Thanks.

  • Worst ios 6 update for Ipad or iphone for Indian Users.

    I am highly disappointed by the Apple IOS 6 update. We cannot use maps as the directions are not available for us. I am sure the sale of Iphone or Ipad will hit very badly in India if the maps are not updated to be used for Indian user. The maps are only user friendly for US, Europe or some Asian countries. I can gaurantee that the amount of Iphones bought in India is very huge and I am sure Apple would not like to loose it to Samsung.

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • BSP - UserId and Password for Internal Users - Anonymous for other users

    Hello,
    We developed an application via BSP's. This application can be accessed by two kind of users.
    1. External Users, with should access the page without using a userId and password.
    2. Internal Users, they will have more authorisation and need to specify their userId and Password.
    How can we accomplish this? I tried internal aliases, but can't get it to work properly.
    In the first service 'zbsp' I didn't specify a userId and password in sicf.
    Then I created an internal alias 'zbsp' referring to this 'zbsp'. In this alias I specified a userId and Password, but the system still asks for a userId and Password. (and after logging in the system gives the following error: The application name in URL .../bc/bsp/sap/zbsp2/uat_report.htm is invalid.)
    What did I do wrong? Or are there other ways to accomplish this?
    Greetings,
    Bart

    Take a look at the following mesaages that discussed the whole SSO and SSO2 ticket logins.
    As for a way to handle the two different login types. Well first and formost - active the SSO Tickets on your system.  Set your BSP up for that.
    Then create a new starting page with an alias to the pöublic section for BSP's in your system. On this page make two links.
    For your external users - one that redirects to your BSP passing the user and password in the url for the "read only external user" - that's the sap-user=name here&sap-password=passwordhere.
    For your internal people give them simply the link to the BSP which when they click it will see no user name and password and redirect them to the BSP login.
    Make sure you setup the BSP login according to SAP note 517860 and follow the instructions from http://help.sap.com/saphelp_nw04/helpdata/en/1d/13c73cee4fb55be10000000a114084/frameset.htm using the supplied SYSTEM_PUBLIC)
    It's a bit basic but it works, we do it
    Oh and setting up the system for the SSO (transaction sso2) is very very simple!!

  • Delayed mail for internal user send a mail to gmail account

    hi to every one,
    Today we are facing an issue in exchange server 2010
    Whenever internal user send a mail to some of gmail accounts user receives a mail from postmaster states that
    This is an automatically generated Delivery Status Notification.
    THIS IS A WARNING MESSAGE ONLY.
    YOU DO NOT NEED TO RESEND YOUR MESSAGE.
    Delivery to the following recipients has been delayed.
    Action: delayed
    Status: 4.4.7
    Will-Retry-Until:
    Regards
    Kart26

    Hi,
    Did the issue occur when the specific user you mentioned above sent email to two gmail users at a time?
    Is there any recipient limit for this specific user?
    To narrow down the issue, I recommend you check the smtp log about this specific user for related messages.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • ATP in SD. Advantage of ATP server & locks for multiple users.

    hi,
    I am working on ATP in SD. We have to design our own ATP calculation logic.
    1. What is advantage of ATP server (logical partition) in SD. does it helps in regulating the calls for ATP calculation.
    2. In standard there is lock for plant & material combination i.e. Material block with quantity transfer.  but here i want blocking to be done on the level material-storage location including one more entity called paper machine which is specific in this ATP calculation.

    Hello Rishi,
    It is quite possible to connect more than one SCM system to ECC technically. Business case will be little specific to customer requirements i.e having existing SCM systems for different business units.
    GATP check can be carried out in different SCM system as you rightly mentioned based on CIF integration model. It doesn't create any issue. We have similar system set-up for internal use.
    Only issue what I see here is, in case of RBATP, if you are using cross location ATP check, if will not give you desired results. Second issue will be for planned supply components, if material is planned in separate SCM system.
    Such system set-up works fine when you are having isolated materials and location to plan and GATP.
    Regards,
    Dinesh Goyal

  • Plan version locked for certain users

    Hi,
    Could someone help me regarding this issue.
    We would like to lock a plan version for some users and some users have to be able to work with that plan version.
    Thanks in advance.
    Best regards.

    Hi Judit,
    Customizing: Controlling / general controlling / organizaion / maintain versions:
    Choose the version you want to work with, tick "controlling area settings" and in the rigth screen, scroll to the right until you view the field "AUGR".
    Read F1-help for this field and contact the authorization responsible to go on with that.
    best regards, Christian

  • Table data getting locked for multiple user for a Z-table updation after EH4 to EHP6 Upgrade

    Hi,
    We have one new upgraded system at EHP6, earlier system was at EH4 where multiple user can Run one Z  T-code and can edit the entries for the Z-table.
    This Z-Tcode is calling SM30 internally for updating the Z-Table.
    Now in the upgraded system, when one user is into the transation code, and other user runs that T-code, systems throws a POP-UP mesg saying that the data is locked and can be displayed only(can not be edited).
    I have debugged the code in both the environment and found that there is one statement Call C_ENQUEUE ID < > field. for which the Sy_Subrc is coming as 2 in the upgraded system which is causing the issue, where as the sy-subrc is 0 in the system at EH4 level.
    Can any body tell me why this Z-tcode is not allowing to be accessed by multiple user at same time for Editing(updating the table) .
    Regards,
    Archana Jha

    Hi,
    When you create the lock object you can define the keys.
    and then you can use those in the ENQUEUE function.
    Regards.
    regards.

  • Ipad needs support for multiple user accounts!

    There is a big difference between a smartphone and a tablet computer. Tablet is a device that may sit on a coffee or a kitchen table, with everyone in the family being able to check on their own email, browse internet, etc. and still have privacy for their own data. Very few of us can afford to buy an ipad for each family member.
    I would say this should be number one priority for apple, more urgent than new screen, better camera, etc.
    We need this feature, even if it comes with some restrictions compared to OSX – for example, if all applications of a logged out user should terminate. The trouble is how to do it so thousands of existing applications won’t be affected by it. The good news is that all apple devices run unix underneath, which may make it easier to implement this much needed functionality.
    If you agree with me on this issue, let's make some noise on this thread and let apple know what we really need!

    Johnathan Burger wrote:
    You have never heard of webmail?
    Tell that to Apple if you have a MobileMe account! Anyway, it's not just mail, there is Facebook, Twitter, and all the other user accounts that have to be logged in and out of.
    We do not need this feature, you might but I do not.
    You may not, and I may not, but lots of people do, so please respect their needs.
    It clearly is highly unlikely that iOS would ever get this feature, but there is no harm in sending feedback to Apple.

  • View + stored function + synonym for other user

    Dear All!
    I've got a quite strange problem which I cannot decide whether it's caused by my lack of knowledge on the appropriate topic or by an Oracle bug. I'm already after some heavy googling on the topic and I was unable to track any valuable answers neither in forums nor in the Oracle documentation. I'll try to be as short and specific as possible.
    Database: Oracle 10g
    Result of "SELECT BANNER FROM V$VERSION":
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    PL/SQL Release 10.2.0.4.0 - Production
    "CORE     10.2.0.4.0     Production"
    TNS for Solaris: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - Production
    I have two users in the database for a single Web application: UAPP01, which is the owner of application DB objects and UAPP02 which is the application user connecting to the DB. The application runs for quite many years by now and DB structure layout has always been following a simple logic: for each DB object used by the app. (tables, views, packages and stored procedures/functions) and found in the UAPP01 there exists a synonym in the UAPP02 schema. For the privileges to be set correctly a role is created: RL_MY_APPL which is granted the necessary privileges on objects of UAPP01 (CRUD on tables, SELECT on views, EXECUTE on procedures, etc..). This role is granted to UAPP02.
    In the previous days I was about to extend the DB with a view that invokes a stored function. This pattern has already occured in the DB previously so I kept following existing conventions: I've created the stored function and the view in the UAPP01 schema, granted SELECT on the view to RL_MY_APPL and created the synonym for it in the UAPP02 schema. This is where the entire functionality began to act strange. I'll try to explain with a simplified example that was sufficient to reproduce the problem:
    REM ========================================
    REM Execute below code as UAPP01 user.
    REM ========================================
    REM Test function.
    CREATE OR REPLACE FUNCTION testfunction(p_param NUMBER) RETURN NUMBER IS
    BEGIN
    RETURN p_param *2;
    END;
    REM Testview version 1. causing trouble.
    CREATE OR REPLACE VIEW testview AS
    WITH testdata AS
    SELECT /*+ materialize*/ LEVEL AS d
    FROM dual CONNECT BY LEVEL <= 100
    SELECT a, b, c, SUM(d) AS sum_d
    FROM
    SELECT FLOOR(dbms_random.VALUE(1, 100)) a, FLOOR(dbms_random.VALUE(1, 100)) b, FLOOR(dbms_random.VALUE(1, 100)) c, testfunction(d) AS d
    FROM testdata
    GROUP BY CUBE(a, b, c)
    REM Testview version 2. not causing trouble.
    CREATE OR REPLACE VIEW testview AS
    SELECT a, b, c, SUM(d) AS sum_d
    FROM
    SELECT FLOOR(dbms_random.VALUE(1, 100)) a, FLOOR(dbms_random.VALUE(1, 100)) b, FLOOR(dbms_random.VALUE(1, 100)) c, testfunction(d) AS d
    FROM
    SELECT LEVEL AS d FROM dual CONNECT BY LEVEL <= 100
    GROUP BY (a, b, c)
    REM Synonym.
    CREATE OR REPLACE SYNONYM UAPP02.testview FOR UAPP01.testview;
    REM Grants.
    GRANT SELECT ON testview TO RL_MY_APPL;
    When creating TESTVIEW with the 1 ^st^ version I cannot query it using the UAPP02 user, I'm constantly getting the error: ORA-00904: : invalid identifier. However, when I use the 2 ^nd^ version everything runs perfectly. What is common in the two cases is that both versions use the TESTFUNCTION function. I have not granted the EXECUTE rights on TESTFUNCTION to the RL_MY_APPL since it was never needed previously (for other views using stored functions) and as far as I know it's not necessary (as both the view and the function are owned by UAPP01). The strange thing in the above behaviour is that the function is used by both versions, however only one of them fails. This is where I thought it's not a granting issue, otherwise neither of the versions would have worked and I think I would have received a different error stating that UAPP02 lacks the necessary privileges on underlying objects of the view.
    As I further digged into the problem by examining the EXPLAIN PLAN output for the two versions I found that version 1. leads to a TEMP TABLE TRANSFORMATION and to MULTI TABLE INSERTs, whereas version 2. simply executes the query without doing such things. In my setup I presume the MULTI TABLE INSERTs were caused by the GROUP BY CUBE. When I simply removed the CUBE and used only GROUP BY the TEMP TABLE TRANSFORMATION remained in place but the MULTI TABLE INSERTs disappeared. As a result of this small modification the view again began to work when I executed it through the synonym and using the UAPP02 user.
    With the original DB objects of our application the behaviour is even more strange: the error comes up if I select from the view and filter for a column that is grouped in the query whereas it works correctly if I filter for the aggregated columns. However, I couldn't reproduce this with the above simplified example.
    No problem occurs with any of the versions if I query the view using the UAPP01 user.
    This hectic behaviour made me suspect that the TEMP TABLE TRANSFORMATION + MULTI TABLE INSERT + synonym + stored function combo appears to bring a strange Oracle bug to the surface...
    As a final note: when executing GRANT EXECUTE ON TESTFUNCTION TO RL_MY_APPL everything works fine in all cases. I know I could simply live with this but I'd really like to get to the bottom of this. Although this extra GRANT appears to solve the problem I don't really trust it. I'd really like to avoid the bug emerging again in Production in case this extra GRANT were not sufficient due to some unknown misteries.
    Excuse me, the post has become a bit lengthy. Thanks in advance for anyone who's willing to read through and answer it!
    Regards,
    Krisztian Balazs Szaniszlo

    The error is thrown at run-time and only for the UAPP02 (second) user.
    The problem is that the appearance of errors is independent of whether the query contains the call to the stored function or not.
    So far I thought that if I use a stored function indirectly, like in this setup: UAPP02.synonym -> UAPP01.view -> UAPP01.stored function, then I don't need the grant. Of course, I understand that if I had used it directly, like :UAPP02.synonym -> UAPP01.stored function then I'd need the GRANT EXECUTE.
    Shall I just ignore the strange behaviour and go on by adding GRANT EXECUTE privilege on all the functions used indirectly through views? It seems to solve the problem, but this behaviour is disturbing me quite and I fear the real root cause of the problem can emerge later in a different fashion.

  • IPad and iPhone for two users but one Apple ID

    My husband has an iPad and I have an iPhone. We share the same Apple ID. I got a text message and it went to his iPad. How are we able to use both but not share contacts or messages.

    On each device in setting look at the receive at address you have declared.  You can each use seperate addresses, and these have nothing to do with your Apple ID.  Take a look and simply give each your own unique e mail address.    If you do not want to share calendars and contacts, then either turn the cloud off, or use seperate cloud accounts as suggested. 
    Longer term, it might make sense for you to establish a second Apple ID.  You can still share music, apps books etc as long as you are syncing from the same I tunes on your computer.

Maybe you are looking for