Ipad is black screen and showing only a logo and updating bar.
I just downloaded new ios in itunes and updated my ipad 3G. But during updating itunes encountered a problem and closed. When I reopened the itunes and connect my ipad again, my ipad cant connect to the itunes and still showing only a logo and updating bar. Could you please share me some ideas?
You probably have to put your iPad into recovery mode now in order to restore the iOS software to fix this problem. This will explain how to do it.
If you can't update or restore your iOS device - Support - Apple
Similar Messages
-
i am trying to reset my iphone 4s with all original seting when i have done all procedure it has gone blank and showing only apple logo and i cannt off or on and not getting start.please advise/
try holding the home and power buttons at the same time for about a minute!
-
my ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that
Have you tried a reset first? If it works, you won't have to go through the restore process.
Hold down the sleep (upper right hand top) and the home button at the same time. A slider will appear. Ignore it and keep holding down the buttons. The Apple logo shoud appear. Then your ipad might work again. It takes a good 15 seconds. You will not lose anything on your ipad.
If you try it a couple of times and it doesn't work, you might have to go through the restore process as has been suggested above. But follow the steps so you don't lose your data.
Hope this helps. -
i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help
It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process. -
My videos open and show only quicktime logo
SO thats it. My videos that I open show only Quicktime logo and the audio works normally. I have updated to the latest version and have a ipad 4. How do I get my video back?
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
-
Iphone showing only apple logo on screen, iphone showing only apple logo on screen
iphone showing only apple logo on display
Hello!
Since your iPhone has hanged on you follow these steps
Hold the Home button and the Sleep/Wake button until it switches off, do not let go,
Keep holding until you see the Connect to iTunes symbol
Now you can let go and plug in your iPhone to your computer and restore from backup!
Hopefully I resolved your issue -
I Downloaded ios6on my ipad2 and it totally wiped it. It now shows the iTunes logo and a USB cord. What do I do to get my information back and why did this happen?
The phone is in recovery mode. See this support document for instructions on what to do. http://support.apple.com/kb/HT1808
-
Just turned on new ipad touch 4 screen just has a itunes logo and pic of usb cord cant clear it
just turned on brand new IPOC touch 4, screen only has a pic of Itunes logo and dsl cord going to it. cant clear it.
What happens when you connect to your computer that is running the most recent version of iTunes?
Stedman -
I Own a brand new iMac 5k with retina display. It gets stuck in the black screen right after the apple logo And all of a sudden shuts down.
You can return a new Mac within 14 days of purchase.
A new Mac is in warranty for 1 year from the date of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare or take it to the Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best. -
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
Bought a new iPad 2 and iTunes only includes Movies and Music tabs at the bottom of the screen, ie no TV Shows. If I search on the Store, say for Homeland I get albums, podcasts, etc everything but the actual TV show. Can anyone help.
TV Shows are not available in certain countries.
Check here:
http://support.apple.com/kb/ts3599 -
I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?
Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
Restore iPad
If you can't restore this way, you will need recovery mode.
Unable to Restore -
I clicked the button in my setting thatz is saying "software update iOS 6.1.2. It turned off and now My iPad 2 is stuck on a black screen that has the iTunes symbol and a charger that I'm guessing means "plug into iTunes". I did so and then waited four hours to download something. And now it is saying that its going to update my iPad but it isn't working. I tried to "update" twice. I am VERY ANNOYED beczuse the last time i updated it, it just turned off and i didnt have ot plug it in or anything. WHY IS IT DOING THIS.....?????? My ipad will not turn on or anything. Help me FIX THIS!!!
hi Kinney. last hour, i update my ipad 2, then im having the same problems as u. im also hoping people can solve this issue.
-
My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US -
Please help. Like I said when I go to see the picture it just shows a black screen with the little camwow logo in the bottom right corner. I already tried turning it off and turning it back on, and I already tryed reseting it. PLEASE HELP PLEASEEEEEEEEEEEEEE imma cry.
I've tried that.. twice. It didn't work for me - any other suggestions?
Maybe you are looking for
-
Disk utility will create a custom disk image on my external HD, but won't encrypt it. I've followed the instructions step-by-step for creating a secure, encrypted disk image several times and it always ends up the same: the disk image is created in t
-
I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?
-
create a matrix query to display a job, the salary for that job based on department number, and the total salary for that job, for departments 20,50,80,90 giving each column an appropriate heading. this is the excise query available in oracle in eboo
-
Writing internal table contents to excel
hi, i need to write data in my internal table to an excel spread sheet which should be similar to my internal table structure. can someone help me out. thanks, ravi.
-
I am trying to update my CS6 but I get an error message # U44M1I208, How can I fix this?