Iphone 4 backup terms and condtions accept button not working!!
Help!
Ive got an iphone 4 which ive had trouble with,recently lost all music/apps etc so ive bought an iphone 5s. man in o2 shop said do a full backup on iphone4 b4 setting up 5S which so far is successful but as ive come to accept full t and c's i press accept button and nothing is happening!! What can i do. Getting on my nerves, all i want is new phone working and cant get this one to do its thing!
I had the same issue (stuck in "Connect to iTunes" logo mode) and looked around for a resolution. I didn't find an answer posted anywhere. I ended up holding down the power button and the home button for about 20 seconds before it finally came back and said I had to restore it. Once restored, everything is fine.
My problem was caused when I accidentally closed the iTunes window when I was updating the software (I meant to turn off the volume as a song was playing, but clicked on the window close button instead of the pause button). I tried holding both buttons for the recommended 10 seconds several times and it didn't clear the problem. Holding both buttons for a longer period of time did the trick for me.
I hope this post is useful to others.
Similar Messages
-
Iphone 5 touchscreen unresponsive and sleep/wake button not working
Iphone 5 suddenly stopped working and I cant restart it. What do I do?
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). -
Myi iphone4 microphone not working and the home button not work after IOS6 updat
Myi iphone4 microphone not working and the home button not work after IOS6 updat
Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
Make sure all your data is available on your computer for manual syncing later.
Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
And you are using iTunes 10.7?
I'm just trying to help get you going. -
I bought a new IPHONE from apple reseller and the earpiece is not working.
There is no sound .Speaker and headfone are working but earpiece is not working.
How can i get it replaced.You can get service information on this web page.
Regards. -
Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.
OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
Go figure? Logical, No! -
Hey I plug my iPhone 5 and the charger is not working and I'm freaking out!!! It never hasn't happened and I just have in this moment 4% I all ready tried on pther pluggers on the house and is the charges that doesn't work. What should I do?
@whimsei,
Hello and thank you for posting back. What it sounds like is the cable that connects to the screen from the motherboard has either come loose or has a issue after the fall.
To fix this it would have to be opened up and the connections checked. If there is an issue with the cable then it would have to be replaced. This will require either you opening up the system yourself and checking the connections and tha cable or sending it in for repair.
Here is the link to the maintenance and service guide. If you feel comfortable doing the work it will help you.
HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC
Maintenance and Service Guide
If you want to send it in for repair here is how.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Please let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP -
★URGENT★ BLACKBERRY TORCH KEYBOARD TRACKPAD AND ALL OTHER BUTTONS NOT WORKING 9810
MY BLACKBERRY TORCH 9810 KEYBOARD AND CALL,ETC BUTTONS STOPPED WORKING.
My blackberry got ink at the top of the phone so I got a lightly wet tissue and cleaned the top part of the phone after I finished cleaning it, I recognised the keyboard stopped working. The touch screen still works but the physical keyboard and all other buttons have stopped working. Please help me, I really ened that phone for emergency uses, etc. I do not want to restore my phone so do not suggest that solution.
UPDATE: Right now I have my phone inside a bowl of uncooked rice.
UPDATE 2: 30 minutes later, I took the phone and rebooted it the keyboard still does NOT work but the trackpad can move up and down but when pressing it does nothing.
PLEASE HELP NEED URGENT HELP.Hi and Welcome to the Community!
30 minutes is not enough...follow EXACTLY the instructions in this FAQ:
http://www.blackberryfaq.com/index.php/Got_Your_BlackBerry_Wet%3F
Also, prepare yourself for the worst...the only thing that is predictable about moisture intrusion into a BB is that the results will be unpredictable. Since you have already re-applied power to the BB too soon, it is much more likely that you have totally fried something inside.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Iphone 4 stuck in recovery mode, sleep button not working and Apple not helping
Hey Apple Community,
My iPhone 4 has been caused me a lot of frustration in the past week and after getting rejected from Apple Customer Service I did not know where else to turn. Sometime in January my iPhone 4's sleep/wake button stopped responding (it seemed to have gotten stuck) and in my initial call to Apple I was told there was nothing they could do for me even though I was within the 1 year warranty. I figured I could live without locking my phone, it wasn't that big of a deal to me so I simply ignored it.
However, just a few days ago my home button started being less responsive and this was clearly something I could not manage without. It was acting odd, sometimes it would work on the first try and sometimes it wouldn't do anything even after 4-5 tries. The worst part was it would automatically go to voice control even when it was sitting in my pocket. This of course caused me quite a lot of embarrassment since voice control would activate in the middle of my lectures sounding a chime and would dial a random person's number and I would open my phone to hearing someone calling my name. No fun indeed. I called apple about it last week and the nice agent told me that he had waved some sort of a fee to talk to me, I did not know I was required to pay to recieve basic customer support. He also said since I was over the one-year warranty by 7 days and because I do not have an Apple Care plan there was nothing he could do for me besides offering me a refurbished iPhone 4 for $150 as a replacement. I said thanks for the offer but that isn't exactly solving my problem. Since Apple comes out with a new phone every year and being an Apple geek I stay current with the new technology - the Apple care plan just doesn't suit me. I protect my phone in the best of cases and I have never damaged a product due to negligence, I'm not a kid anymore so I don't need to insure my products for my own stupidity.
Well just in the past few hours the demon iPhone went from making random calls to showing me a "Connect to iTunes" logo. I figured it had to be reset due to some software probelm (which meant I might not have to fork out $$$ to get the home button fixed), I gladly connected it to my laptop and now it wont seem to leave recovery mode. I have tried numerous times and it seems to complete recovery and then tell me to connect to itunes again. At this point I feel like I have lost my phone (and everything precious I had stored in it).
Of course as a business professional this is quite a set back. All my contacts, all my pictures and scans of products and documents and even the little notes that I kept on there to help me function - all gone. I haven't called Apple yet but since they were unable to help me before I am assuming there isn't much they can do now. I do not want to pay $29.99 to be able to talk to someone who will tell me I am out of luck. I am about 130 miles from the nearest Apple store so the Genius bar is out of the window. So in a last attempt to salvage this expensive piece of technology I turn to you Apple Community for suggestions. I was not able to find an email address for customer service or any method of communication to someone who could just hear me out and give me a reasonable excuse for why Apple cannot do anything for me. I always heard about the great customer service of Apple but I am surprised to see a product fail before my eyes and the manufacturer simply refusing to accept responsibility; all because I am 7 days too late. If I had dropped it or damage it through some programming experiments then I understand Apple refusing to do anything but this case is very disappointing.
I would sincerely appreciate any advice and apologize for writing a novel here, I wanted to present my case in the fullest of details.
- RazaI had the same issue (stuck in "Connect to iTunes" logo mode) and looked around for a resolution. I didn't find an answer posted anywhere. I ended up holding down the power button and the home button for about 20 seconds before it finally came back and said I had to restore it. Once restored, everything is fine.
My problem was caused when I accidentally closed the iTunes window when I was updating the software (I meant to turn off the volume as a song was playing, but clicked on the window close button instead of the pause button). I tried holding both buttons for the recommended 10 seconds several times and it didn't clear the problem. Holding both buttons for a longer period of time did the trick for me.
I hope this post is useful to others. -
My iphone 4s is frozen and my lock button doesnt work and i cant slide to power off the phone. HELP
my iphone 4s is frozen on the lock screen. my lock button doesnt work and i cant slide to power off the phone. It has 100% battery and nothing happens when i plug it into the computer.
My phone screen also is in negative. It is like twitching and ive tried to invert the colors but thats not it. i cant see any apps, pictures , or anything in regular colors. PLEASE HELPPP!You can't. You'll have to wait until the battery runs out and then recharge the phone. It will restart.
Sounds like now's a good time to get the phone fixed. -
Nokia 6120 Classic Accept button not working
I have a Nokia 6120 Classic and is not working fine. I have decided to change my mobile.
Before change my mobile I want to backup all my data and telephone numbers. The problem is that Accept button is not working correct. When I start my mobile I can enter pin number but after this I can't enter the date because I have to use Accept button (the one in the top left). Is there any possibility to skip entering date? This is the only wey to enter mobile and backup my data
ThanksI was going to take it to Nokia care but duh? Should the button stop working suddenly? Without anything wrong also the same with the camera button also I'm not the first one to have this problem right? Then its not our problem but its Nokia's I thought there's another solution, but yeah I'm making angry posts can you just make good products? I see all the people complaint about that button **bleep**, you better not talk while maybe the problem from th company.
-
Mute button, low volume button and high volume button not working after upgrade to Win7 Pro
Hi all, Im using X301. Previously it was shipped with the Vista Business. I was entitled for free upgrade to Win7 since the thinkpad was bought after 25th of June 09. The problem started after I successfully upgraded my Vista to Win7 Pro. My Mute/Unmute button was consistently in amber colour (signal for disabled). the volume button also is not working anymore. On the system side, everything was fine. the drivers is working properly.. the windows also is showing the volume is in a good shape. Unfortunately the button on the thinkpad is always on the disabled mode. Ive been searching for a related drivers that i could download and solve the issue. but till now all the softwares and drivers downloaded from lenovo could not solve my problem. any suggestion or comment is highly appreciated. thanks a million
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
When iOS 6.1 comes out I would update. -
T30 freezing issues and Touchpad & Trackpoint buttons not working.
Firstly I'll explain the freezing issue (this is now the 3rd time I've typed this, as the first two times my laptop froze before I finished!)
I run my laptop with the battery at 100% and plugged in and that's fine; as is running it on battery. The problem arises when my battery is low and I plug it into recharge. Soon after it's running on a/c the screen will go black and only way to shut down is by holding the power button. If I try to restart it too soon, the indicator lights next to the power button will illuminate, but the screen will stay black. Usually after 5-10 minutes it'll boot to the IBM screen & boot the rest of the way, but not too long into normal operation it'll go black again (sometimes hitting ctrl/alt/del will bring the screen back but it would be very distorted (pixilized) and would go black again and reboot. What could be causing these problems while recharging the battery? I've tried this with a couple different batteries (both OEM IBM) and it does it with both.
Secondly, both left and right "mouse" buttons are now nonfunctional (though the middle button of the track points works.) I have the latest version of Ultranav Wizard and all the buttons are enabled. The touch pad and trackpoint ball work fine, just the 2 left and 2 right buttons do not. What could be the culprit for this issue? Luckily I have a usb mouse so that's what I'm using for the time being.
Message Edited by GoalieFergy53 on 02-14-2009 02:30 PMMy T42p Touchpad and Trackpoint work fine however,
the buttons are not responding properly.
I'm forced to use an optical mouse to properly maneuver when working on
the screen.
When the well is dry, we'll all know the value of water. -
Website payment and shopping cart buttons not working on Windows Phone browser
A customer shopping on our site notified me that the "add to cart" and "view cart" buttons were taking him to the PayPal main site and not the shopping cart. I tried a Windows Phone at the Verizon store and found the same issue. I have tested the site on multiple Windows desktop browsers, on Android, Linux and iPad and have never seen this issue. What is going on with IE on Windows Phone?
I had this problem too, but I found a post burried on the web that said to add " p06- " (without quotes) before the imap and smpt server names and that worked:
p06-imap.mail.me.com
p06-smtp.mail.me.com
Everything stays checked, SSL for both, authentication and use same username and password checked. -
Fn shortcuts and blue thinkvantage button not working
The Fn+F2, Fn+F5, and Fn+F8 shortcuts are not working on my computer, yet the Fn+F3 and Fn+F4 shortcuts are working. The other ones used work as well but now aren't and I'm not sure why. They blue Thinkvantage button up by the volume also used to work and is no longer working as well. Any ideas as to how I get them to work again?
I thought this was the one place I could rely on for answers, but I guess not. I have given up hope.
T400
Intel® Core™2 Duo T9400 2.53 GHz__Windows 7 Professional__3GB Memory__160GB, 7200RPM Hard Drive__14.1” WXGA+TFT-CFL__ATI Mobility Radeon™ HD 3470-- -
Program and Source Monitor buttons not working?
I need to take a screen capture of my project, but NONE of the Program monitor buttons are working. I click them and it doesn't do anything.
I'm posting this because none of the suggestions in the other discussions helped me at all.
Screen Capture worked perfectly when I used it YESTERDAY. Aside from closing the program, I can't find any other changes that have been made to either my computer or PP_CC.
I have already tried:
-Reloading PP_CC
-Restarting my computer
-Resetting my preferences (Held SHIFT while opening the program)
-Changing projects and timelines
-Adding and removing buttons to see if that did anything
I'm at a complete loss....
Is there a way to take a screenshot in the meantime while I figure out what's going on with this issue?
Working on Windows 7 64bit systemHi,
This might help :
Go to Documents > Adobe > Premiere Pro and rename the 8.0 folder to 'old8.0' and then launch Premiere.
8.0 is Premiere CC 2014
7.0 is Premiere CC
Rename the respective folder.
Note: By doing this you will lose your customised keyboard shortcuts and custom workspaces.
Report back if it helps.
Thanks,
Rameez
Maybe you are looking for
-
Firefox opened today at 5 pm. I closed it when finished, then tried to reopen it about 6 pm - it will not open. I have tried several times in the last hour and it will not open. When I attempt to open Firefox, the 'busy' circle spins for several seco
-
Output control and outbound parameters
Can you please help me locate the output control and outbound parameters... thank you in advance...
-
Can't seem to get this device to appear as a simulated device option under MAX. Anyone got any ideas. I have installed LV2014, LV2014 drivers DVD and LV2014 Instrument Design Libraries for Oscilloscopes 14.0.
-
Feature request: selective per-file Smart Previews in LR5
I would like to be able to selectively enable Smart Previews on a per-file basis, rather on entire directories. It would be great if I could do this after importing files, too. I am using: Lightroom 5.0 64-bit Windows 7 Ultimate 64-bit
-
I still have $0.1USD in my account which is pretty useless. I want to change my country to Canada since that's where my billing info is now... but it seems that I can't change country info until I use up the $0.1USD. What should I do? Any suggesions?