Iphone 5 through AT&T, No Data Service- Help!

I just got my iphone 5 yesterday, and it connected great to my wireless network. Problem now is that I am away from my wireless and need to use my data plan. There is no connection in the top left where the 3g or 4g banner should be..
The phone keeps telling me that i am not connected to the internet.
Does anyone have any insight into this? Is this something i need to take to the AT&T store, or the apple store?
I just checked my plan and i am currently enrolled in unlimited data.
Help!

Is that a seperate process?
I went to that site and it said We apologize for any inconvenience. iPhone users must connect to iTunes to activate service
I am able to make phone calls and text messages from the phone... Is this a seperate step I missed?
Thank you so much for your help!

Similar Messages

Is there a way in which you can deliver messages only through iMessages and not text messages . If the other iphone user has switched off the data services then the message gets delivered when the user switches on the data services.

I want messages to be delivered to the other person only through iMessages . Is there a way to disable text messages being sent to the other iphone .

In message settings, disable the send as SMS setting. That does mean any message sent to a non-iMessage enabled device will just not get sent.

Iphone 5 - No network access however data services are available

The iPhone 5 has not network access, i am unable to make or receive calls.
However the data seems to be working as the App store and internet is accessible.
Can you please help me, I have always wanted a iphone and now that I have it I cant use it. This issue has been going on for the past 3 weeks.
Thank you
John

Since you have done all the troubleshooting steps from the article, and contacted your carrier you should next contact Apple or take it to a local Apple Store for additional assistance, which is the last step in the article I provided:
If you can't make or receive calls on your iPhone
If you still can't make or receive calls, restore your iPhone as new. If restoring doesn't fix the issue, contact Apple Support or take your iPhone to an Apple Retail Store or Authorized Service Provider.

Flash Builder 4.5 Data Services Wizard, setting up REST service call returns Internal Error Occurred

Dear all -
I am writing with the confidence that someone will be able to assist me.
I am using the Flash Builder Data Services Wizard to access a Server that utilizes REST type calls and returns JSON objects. The server is a JETTY server and it apparantly already works and is returning JSON objects (see below for example). It is both HTTP and HTTPS enabled, and right now it has a cross-domain policy file that is wide open (insecure but its not a production server, it's internal).
The crossdomain file looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
   <allow-http-request-headers-from domain="*" headers="*" secure="false"   />
   <allow-access-from domain="*" to-ports="*" secure="false"/>
   <site-control permitted-cross-domain-policies="master-only" />
</cross-domain-policy>
The crossdomain file is in the jetty server's root directory and is browseable via HTTP and HTTPS (i.e. browsing to it returns the xml)
Now before all of you say that using wizards sucks (generally) I thought I would utilize the FB Data Services Wizard as at least it would provide a template for which I could build additional code against, or replace and improve the code it produces.
With that in mind, I browse to the URL of the Jetty Server with any web browser (for example, Google Chrome, Firefox or IE) with a URL like this (the URL is a little confidential at the moment, but the structure is the same)
https://localhost:somePort/someKey/someUser/somePassword/someTask
*somePort is the SSL port like 8443
*someKey is a key to access the URL's set of services
returns a JSON object as a string in the web browser and it appears like the following:
{"result":success,"value":"whatEverTheValueShould"}
Looks like the JSON string/object is valid.
I went through the Flash Builder Data Services Wizard to set up HTTP access to this server. The information that I filled in is described below:
Do you want to use a Base URL as a prefix for all operation URLs?
YES
Base URL:
https://localhost:8443/someKey/
Name                    : someTask
Method                    : POST
Content-Type: application/x-www-form-urlencoded
URL                              : {someUser}/{somePassword}/someTask
Service Name: SampleRestapi
Services Package: services.SampleRestapi
datatype objects: valueObjects:
Completing the wizard, I run the Test Operation command. Remember, no authentication is needed to get a JSON string.
It returns:
InvocationTargetException: Unable to connect to the URL specified
I am thinking - okay, but the URL IS browseable (as I originally was able to browse to it, as noted above).
I continue to test the service by creating a Flex application that accepts a username and password in a form. when the form is submitted, the call to the service is invoked and an event handler returns the result. The code is below (with some minor changes to mask the actual source).
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                                 xmlns:s="library://ns.adobe.com/flex/spark"
                                 xmlns:mx="library://ns.adobe.com/flex/mx"
                                 xmlns:SampleRestapi="services.SampleRestapi.*"
                                 minWidth="955" minHeight="600">
          <fx:Script>
                    <![CDATA[
                              import mx.controls.Alert;
                              import mx.rpc.events.ResultEvent;
                              protected function button_clickHandler(event:MouseEvent):void
                                        isUserValidResult.token = SampleRestAPI.isUserValid(userNameTextInput.text,passwordTextInput.text);
                              protected function SampleRestAPI_resultHandler(event:ResultEvent):void
                                        // TODO Auto-generated method stub
                                        // print out the results
                                        txtAreaResults.text = event.result.message as String;
                                        // txtAreaResults.appendText( "headers \n" + event.headers.toString() );
                    ]]>
          </fx:Script>
          <fx:Declarations>
                    <SampleRestapi:SampleRestAPI id="SampleRestAPI"
                                                                                             fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)"
                                                                                             result="SampleRestAPI_resultHandler(event)"
                                                                                             showBusyCursor="true"/>
                    <s:CallResponder id="isUserValidResult"/>
                    
          </fx:Declarations>
          <s:Form defaultButton="{button}">
                    <s:FormItem label="UserName">
                              <s:TextInput id="userNameTextInput" text="q"/>
                    </s:FormItem>
                    <s:FormItem label="Password">
                              <s:TextInput id="passwordTextInput" text="q"/>
                    </s:FormItem>
                    <s:Button id="button" label="IsUserValid" click="button_clickHandler(event)"/>
                    <s:FormItem label="results:">
                              <s:TextArea id="txtAreaResults"/>
                    </s:FormItem>
          </s:Form>
</s:Application>
It's a simple application to be sure. When I run it , I get the following returned in the text area field txtAreaResults:
An Internal Error Occured.
Which is equivalent to the following JSON string being returned:
{"success":false,"value":"An Internal Error Occured"}
It appears that the call is being made, and that a JSON object is being returned... however it does not return the expected results?
Again the URL constructed is the same:
https://www.somedomain.com:somePort/someKey/someUser/somePassword/someTask
So I am wondering what the issue could be:
1) is it the fact that I am browsing the test application from an insecure (http://) web page containing the Flex application and it is accessing a service through https:// ?
2) is the JSON string structurally correct? (it appears so).
3) There is a certificate enabled for HTTPs. it does not match the test site I am using ( the cert is for www.somedomain.com but I am using localhost for testing). Would that be an issue? Google Chrome and IE just asks me to proceed anyway, which I say "yes".
Any help or assistance on this would be appreciated.
thanks
Edward

Hello everyone -
Since I last posted an interesting update happened. I tested my Flex application again, it is calling a Jetty Server that returns a JSON object, in different BROWSERS. I disabled HTTPS for now, and the crossdomain.xml policy file is wide open for testing (ie. allowing every request to return data). So the app accessing the data using HTTP only. Browsers - IE, Opera, Firefox and Chrome. Each browser contained the SAME application, revision of the Flash Player (10.3.183.10 debugger for firefox, chrome, opera, safari PC; 11.0.1.129 consumer version in IE9,) take a look at the screen shot (safari not shown although the result was the same as IE and chrome)
Note that Opera and Firefox returned successful values (i.e. successful JSON objects) using the same code generated from the Data Services Wizard. Chrome, IE and, Safari failed with an Internal error. So I am left wondering - WHY? Is it something with the Flash Player? the Browsers? the Flex SDK? Any thoughts are appreciated. Again, the code is found in the original thread above.

HT4993 Sprint data services

Hello,
I have been a Sprint customer for more than 12 years.
At the beginning of October this year I made the change to an iphone. Then the problems started. After many repeated calls to Sprint to try “workarounds” to get the data services to work the company line is that they make no guarantee to provide regular data service.
I have made two trips to the Apple store to try their help.
The “genius’s” at Apple tell me that this is a known problem in the Twin City metro area. That Apple has been working with Sprint and maybe half the time they get the iphone 5 to connect to the data services.
During several call to Sprint, they emphatically denied that there is any problem with the data service.
I have asked to be let out of my contract and the reply was that there is no breach as there is no guarantee of data service availability.
Apple also says about half of the iphone 5 customers are experiencing this problem.
Can you help?
Thank you,

Nobody on this forum can help. This is an issue with Sprint, suggest you talk to someone higher up at Sprint to help you.

I did an update to my wife's iPhone and now it won't connect through the 3G. It says you are not connected to a cellular data service

I Updated my wife's iPhone the other to the new operating system. It asked me first to use iCloud backup so I did. After the update was complete my wife can use wifi but when we try the 3G it says you are not connected to a cellular data service.
IT shows Bell as the provider but we seem to have lost something during this update.
can someone help me please.

Check Settings>General>Cellular and make sure Cellular Data is set to On. If it is, try putting it in Airplane mode for 15 seconds, then turn Airplane mode off again. If it persists, give you carrier a call to confirm that it's properly activated with them and that your data plan is properly provisioned.

I get this message when i try to sync and download my iphone: itunes was unable to load data class information from sync services, reconnect or try again later. what does that mean and who do you fix it

I get this message when i try to sync and download my iphone, ITUNES was unable to load data class information from sync services, reconnect or try again later. this has happened twice. i have not downloaded by phone in several months. the first time i got this message i did not understand i and left my phone plug in for 12 hrs and it never did anything. today. when i got the message i just unplugged it.
help

http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

IPhone 5 cellular data services failing

ISSUE/SYMPTOMS: iPhone 5 ONLY: Cellular Data stops intermittingly, cellular data locks up without warning, Wi-Fi data connection not working on occasion, iCloud contacts, calendar and reminders not updating, Find My Phone not working, mail or Internet not available or server time-outs. No error messages though. All of these are symptoms of no data service. Problems seem to be related to iPhone 5 failing to switch between LTE and 4G or 3G data services on AT&T.
My iPhone 5 32GB AT&T version (iOS 6.0.2) along with my clients and family using iPhone 5 in the state of Oklahoma are having this issue on their AT&T iPhone 5's: no cellular data connection re-established if at anytime the LTE connection is lost or weak. As with iPhone's prior to iPhone 5, the iPhone 5 is supposed to drop down to the next tier of data service and re-connect to cellular data service when the higher speed cellular data service is not available. Apparently this is not working well on the iPhone 5.
What led me to research this LTE issue was that my iPhone was not syncing on iCloud with contacts, calendars and reminders with my other iOS devices. Other times this issue became apparent was when iMessage quit sending and receiving until I would reboot my iPhone (sometimes it would finally send the message as a “text message”). When I had these problems I also found out I was not getting any cellular data service for Internet browsing, mail, Maps, Find My iPhone, etc. This would happen without notice. In other words I would not receive any notice or error message that data service had stopped other than the fact I was not receiving any mail, iMessages, or iCloud sync updates. My only resolution was to reset or reboot my iPhone several times a day, and that would resolve it about 70% of the time.
I have talked to Apple Support on 2-3 occasions in the last week and AT&T Support twice in the last 2 days. If it is really true, only the AT&T Technical Support Advisor informed me of a nationwide issue relating to iPhone 5 and LTE: iPhone 5's are not re-connecting to 4G or 3G cellular data service once the LTE data connection is lost or dropped... the voice calls continue to work, but cellular data service fails and stays locked up without an error message until the customer reboots the iPhone.
Obviously this is very unacceptable. We depend on these data services and at minimum need to know when it stops working instead of finding out from a phone call that someone sent us an important email or something.
The AT&T representative also said that both AT&T and Apple are aware of and are working on the issue as it is a nationwide problem with iPhone 5 and LTE. The Apple Support Advisors I talked to made no mention of this "known" issue. AT&T said that it is partly AT&T responsibility because the capacity of LTE is overloaded and cellular data connections are dropping because of the lack of coverage and/or capacity. They actually refunded my data service for a whole month in apology for the inconvenience (I did not even ask for that--I just want my data service to work). But they also said that Apple has responsibility in this issue because the iPhone 5 should drop down and re-connect to the next lower tier of data service when LTE is not available or lost; instead, it is locking up somehow or it still thinks it is connected to LTE when it is actually not. I don't know how accurate these statements are, but my problem is real.
TEMPORARY WORK-AROUND / FIX FROM AT&T: Disable LTE on the iPhone 5. Or when you figure out that data is not coming to your iPhone, use Airplane Mode ON/OFF for a few seconds to force re-connection to a tower without rebooting the iPhone. You can Disable LTE on the iPhone 5 in SETTINGS/GENERAL/CELLULAR. I have disabled LTE on my iPhone 5 and have not had any of these cellular data issues since.
Disabling LTE is not acceptable either, but it is working. At least I seem not be losing connection or locking up without knowing it. In my office over the course of a day, my iPhone 5 will jump back and forth on LTE and 4G sitting in the same place. Disabling LTE has stopped this and the problem, but the iPhone 5 should switch cellular data services seemlessly just like the phone switches towers on a phone voice call seemlessly (most of the time).
WI-FI ALSO STOPS WORKING SOMETIMES AFTER THIS LTE disconnect / lock-up issue: That has been my experience along with my clients and family as well. If you use Wi-Fi a lot on your iPhone it will hide this LTE issue until you leave your Wi-Fi and get on LTE and then drop LTE (silently) and then go back to your Wi-Fi. My experience has been I have to reboot the iPhone to even get Wi-Fi working again after that happens.
I do not know if some of these comments and analysis are really accurate or valid or not... all I know for sure is since I upgraded my iPhone to the 5 along with my other family members and clients, we have had "no data" on many occasions and are continually rebooting our iPhones and looking for what is wrong.
My questions to the support community are these:
     1. Is anyone else having this issue? Or is it just me and my few? Maybe a lot of people do not realize they are not getting their data because they are on Wi-Fi most of the time or they are just rebooting and not trying to identify the real problem. AT&T said it was nationwide iPhone 5/LTE issue. Anyone else heard that from either Apple or AT&T?
     2. Is this an iPhone 5 / Apple issue or is AT&T solely responsible? Or is it both? Where do we get a solution??? Is AT&T LTE holding false connections with iPhone 5 or is the iPhone 5 failing to recognize a dropped LTE cellular data connection and then failing to attempt to re-connect with 4G or 3G?
     3. Did I miss where this issue is posted? I searched Apple Support and Communities and did not get any hits. Any updates or further insight on the issue? Any other fixes other than Disabling LTE?
      4. If this is in fact a real issue belonging in part to the iPhone 5, we need to escalate Apple’s attention to it.
Thanks in advance for your help and feedback.

Thank you fellow users and experts for your feedback and updates. Sorry about the large font on the original post... accidental via cut and paste.
I have escalated the issue with both Apple and AT&T. I actually got senior level troubleshooters from both Apple and AT&T on the phone at the same time... rare moment. Here are the key points of the update:
     1. AT&T did NOT confirm the earlier statement by another AT&T Technical Support Agent that this was an emerging nationwide issue about iPhone 5 and LTE losing data connection and not reconnecting at a lower level or re-connecting to LTE once the signal came back. So that earlier statement was not accurate as suspected by all of us. The senior tech at AT&T said he has seen this issue sporadically over the last month or so, but only with about 3-4 customers. He said it seems to be location or phone dependent (some phones not all phones).
     2. The Apple Tech was satisfied that all that could be done to eliminate my issues possibly relating to my instance of software / iOS had been accomplished except erasing my iPhone and restoring as a new phone (I have avoided this inconvenience with the argument that other family/clients with the iPhone 5 have had the same problem).
     3. AT&T went so far as to examine which towers I had been connecting to over the last week and looked at other technical data that could possibly explain the issue. I now know I have 3 towers that provide LTE within 4 miles of my home/office, one within a half mile. But so far there is nothing to explain or even properly identify the issue. AT&T offered me to take my phone to an AT&T store, try to force replicate the problem there, if so, the store would put my SIM card in a brand new iPhone 5 (just to test) and try tor replicate the problem again. If replicated on a new phone, there is a deeper issue; if resolved on a new phone, the answer is obvious. I have not taken the time to do this yet.
     4. On Friday, Jan 4, 2013 while talking and between the tech support calls (on a different phone), I was able to re-create the problem 2 separate times in my home/office by forcing my iPhone to weaken its connection to service (burying it under electronic gear) and then waiting a few minutes, then trying to browse the Internet--no data service unless I manually reset the connection. I am only able to cause the issue to occur if there is at least 15 min of idle time after a weak signal condition AND only if I don’t completely lose a connection to cellular voice service. It seems that if you go down to NO SERVICE the phone will do new a search and keep searching until reconnects to LTE or other signals correctly, but a weak connection seems to be strong enough for voice service but can sometimes cause the LTE data service to stop without reconnecting to LTE, 4G or 3G unless I manually intervene. It also seems that idle time with a weak connection is also necessary to re-create the problem manually. Since Friday, I have not been able to re-create the problem. This has been an intermittent problem, so who knows.
FYI, I have never had this problem with my new iPad (also on AT&T LTE) that has been with me when the iPhone fails to have data service, but my iPad is never in my pocket or other places with perhaps less signal.
Again, if you are connected to Wi-Fi on your iPhone 5 most of the time, you may never notice this issue if you are even having it.
So far no progress on the real issue or resolution, but both Apple and AT&T have put forth very admirable effort.
If you or others you know are having this issue, please take the time to post a reply to this issue. Thank you.

HT4623 Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

Contact your carrier to ensure data access via their network is provisioned properly for your account and iPhone with the new iOS 6 update installed.

Connection issue between Data service(DQ) to PI through SOAP adapter.

Hi Guys,
We are trying to connect the data services(DQ) with SAP PI through SOAP adapter. I provided the wsdl file to data services team and they are trying to send messages to PI. Looks like the messages are showing successful in there system, but not showing up in PI system.
I tried the same file using xmlspy and PI receiving the messages from XMLSPY. We are wondering whats going wrong?
Any idea about this data services system? Is there any other better way to receive messages to PI apart from webservices?
PS: Connection is working fine from PI to DQ thorugh SOAP adapter.
Thanks
Deepthi.

>>>> We are trying to connect the data services(DQ) with SAP PI through SOAP adapter. I provided the wsdl file to data services team and they are trying to send messages to PI. Looks like the messages are showing successful in there system, but not showing up in PI system.
You are using soap sender adapter ... Hosting webservices and DQ team is able to access your webservice. Also using XMLSPY you are able to see pi messages.
If you are using advance adapter engine, Please check only in the RWB -> adapter engine.
If you are not using AAE, check in both SXMB_MONI and RWB for the wide range... Something problem with filter query in your checking...
Note since XMLSPY testing goes through Pi and able to monitor means you dont need another webservice client tool.
Solution:
use tcp monitor to monitor the soap message ... It is better option
/people/stefan.grube/blog/2007/03/29/troubleshooting-soap-http-and-mail-adapter-scenarios-with-tcpgateway

TS2774 How to subscribe a cellular data service in Iphone 4s

How to subscribe a cellular data service in Iphone 4s

If you did not edit the Cellular Data Network settings on your iPhone and you are unable to use Cellular Data Network services, try turning off and then turning on iPhone. If the issue persists, contact your carrier about the availability and provisioning of these services on your wireless account.

Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g. I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service". How do I fix it?

Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g. I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service". How do I fix it?
I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
Any help appreciated.
Thanks,
Louisa

Hi, l have the same problem, were you able to resolve?

Connect to Azure Sql DB through WCF Data Service

I am following the tutorial:
http://msdn.microsoft.com/en-us/library/windowsazure/ee621789.aspx;
Connect to Windows Azure SQL Database Through WCF Data service on a
Windows 8 machine running VS2013. Until starting this tutorial, I have only been using VS for WPF applications. So it might not be properly configured for a web app.
Everything works just fine until I get to the section on Creating the Client Application. Clicking the Discover button populates the services pane with my service. When I click on the service in the pane I get the following Add Service Reference
Error:
There was an error downloading 'http://localhost:62778/testDataService.svc/_vti_bin/ListData.svc/$metadata'.
The request failed with the error message: --- , . . .
If I ignore it and click OK it essentially tells me the same thing:
"There was an error downloading metadata from the address. Please verify that you have entered a valid address."
I am thinking that there is a configuration issue on my machine. Perhaps something needs to be installed or running, . . .
I have tried doing the same steps with a local SqlExpress database, and get the same problem. If I try to go directly to the website via the browser:
http://localhost:62778/testDataService.svc
I get a Request Error.
Any suggestions, thoughts on this will be greatly appreciated!
Robotuner

Hi,
From the error message "There was an error downloading 'http://localhost:62778/testDataService.svc/_vti_bin/ListData.svc/$metadata'.", I suspect that you created a folder named _vti_bin, and created wcf data service named ListData, in my test
application, from my experience, you issue may be caused by "$metadata", can you give further information to me, there was a
wcf data service quick start, hope this will help you.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Why is my iphone saying not subscribed to a mobile data service

why is my iphone saying not subscribed to a mobile data service

Most likely because it is not subscribed to a mobile data service.
Check with your cell carrier to ensure that your cell data plan is properly provisioned or get a new SIM for it.

Iphone 5 through AT&T, No Data Service- Help!

Similar Messages

Maybe you are looking for