IPhone: Turning off UINavigationController back animation...

I am pushing some views into the nav controller stack with animation turned off. But the back button still performs the animation. Is there a way to turn that off using the default back button, or do I need to roll-my-own in this case and perform the pops in code.

Hi, I need to do the same thing. Did you ever find a good way to do this?

Similar Messages

  • I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn that app back on. Would there be any way I would be able to get the data from that app?

    I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?

    LukaPetranovic wrote:
    Hello anita4323.
    I hope this will help you with your problem:
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
    Let us know if you succeeded or need any further help.
    I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible.

  • My iPhone turns off whenever it goes into standby mode and has to be turned back on to work

    My iPhone turns off whenever it goes into standby mode and has to be turned back on to work

    That's normal behavior. It turns off automatically in order to preserve the battery. Pushing the On/Off button turns it on immediately. This also requires entering the passcode and prevents the phone from being accessed by anyone but you.

  • Hello my iphone turn off with full battery and it dont want to turn back on any help

    Hello my iphone turn off with full battery and it dont want to turn back on any

    Try here.
    iOS: Not responding or does not turn on
    Your orange font is very hard on the eyes.

  • My iphone turned off and won't turn back on

    i need help...my iphone turned off and will not turn back on

    Hi. First of all, what iPhone is it? The following might help:
    1) Push and hold power button for 10 seconds, unless you see an Apple Logo
    2) Push and hold power and home button for 5 seconds
    3) Plug it into your computer and see if anything happens, or
    4) Try to charge it
    Also, what happened when you tried to turn it on?

  • My iphone 5 will freeze up and turn off and back on. It will go to the apple screen and then go black MULTIPLE times before it comes back on. No buttons work while this happens. My phone is a week old.

    My iphone 5 will freeze up and turn off and back on. It will go to the apple screen and then go black MULTIPLE times before it comes back on. No buttons work while this happens. My phone is a week old.

    User troubleshooting is restart, reset, restore from backup, restore as new. If you perform these steps and it still doesn't work, then make an appointment at the Apple Genius bar and have the hardware checked.

  • IPhone turns off at 25-30% battery left.

    My iPhone turns off with 25% battery left and it wont turn back on until I plug it in! I have no idea what's causing this!

    ^^IGNORE THAT^^
    same problem but mine turns off when using camera with 10-45% of battery remaining
    shows flat battery animation
    will NOT turn back on until i plug charger in, then it turns on immediately showing 10-45% of battery
    seen far too many people/posts here about this with NO solution
    i had a new battery fitted 10 days ago and its still happening
    so its NOT the battery and NOT the firmware
    care to explain apple?
    or refund me the £300 upfront payment for the device + £38 per month for 2 years!!!!
    + battery replacement fee?
    i know its OUTRAGEOUS that im paying this much for a faulty device but my pointless 1 year warranty is no longer valid

  • In updating my iPod to 6.1.2, I received an error during the update.  Now, ipod is not rebooting.  Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture.  I don't know how to reset so that I can restore my backup

    In updating my iPod to 6.1.2, I received an error during the update.  Now, my ipod is not rebooting.  It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture.  I don't know how to reset so that I can restore from my backup.
    A similar thing happened when I updated the ios on my ipad.  But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have find my iphone turned off, and i need to turn it on to find my iPhone

    On my iPhone 4s I have the tab, find my iphone, turned off.
    I need to turn it back on, because I cannot find it and I am wondering if you can do it remotely

    Unfortunately, you can't turn it on remotely.

  • IPhone turns off then on for no reason

    iPhone turns off then on for no reason

    martazoila:
    Welcome to Apple Discussions.
    Take a look at these FAQs by Dr. Smoke and see if any of his recommendations help:
    Resolving Disk, Permission, and Cache Corruption
    Multiple applications quit unexpectedly or fail to launch
    The Spinning Beachball of Death
    Please post back and let me know if anything worked for you, or with further questions or comments.
    Good luck.
    cornelius

  • TS3694 My iphone turned off earlier for no apparent reason. I have connected it to a USB and the screen lights up showing a USB with an arrow pointing to the iTunes logo. As it apear in iTunes, my only option is to reset my iphone. It wont reset b/c it tu

    My iPhone turned off for no reason and wont turn back on but it will show me the apple logo then turn off again. I have connected it to the computer and attempted to reset it but it turns off before it can reset.

    Ok. I have doen some research and I have some things for you to try.
    First, what version iPhone do you have?
    Second, Try holding the home+sleep button for ten seconds and you should see the apple logo come up.
    Are you using your iPhone with a Mac or PC?
    Have you upgraded to iTunes 11?

  • IPhone turns off after calls

    Why does the iPhone turn off after phone calls. I've had two phones now, both have had this problem. It doesn't happen on all calls. On one phone it happened more than the other. But the Iphone turns off after some phone calls and it takes anywhere from about 15-40 seconds before the turn on button will actually turn on the phone. Is this a hardware problem, or a software problem?

    It's neither, it's normal. If the phone was asleep when the call came in, it will go back to sleep when the call ends since this was the last thing it was doing when you accepted the call.

  • My iphone turned off

    my iphone turned off suddenly!! and it wont turn back on..

    Have you tried charging it to see if it will come back on while plugged in?  If so, the either a soft reset or a hard reset may be in order.  Instructions are found here.

  • If my iphone turns off it might be the battery

    my iphone turns off and when turn it back on, it tells me that needs to be connect it to power oulet it shows that it doesnt have battery and my iphone only works when its connect to power oulet

    Mine is the same way.  7.1 didn't fix it. Sometimes turns off above 60% and requires power to turn on and stay on. Once power is connected and it turns on, it operates as normal and the power is back to whatever it was before it shutdown.

  • My iphone turned off and it wont turn on again ive charged it over night and nothing and my home button doesnt work so how can i reset it or get it to work?

    my iphone turned off and it wont turn back on ive tried everything but my home button is broekn so i cant recover it how can i fix this?

    Well, if your Home button is broken, you won't be able to reset your phone, and if the Sleep/Wake button won't turn your phone on, it's a trip to the Apple store.

Maybe you are looking for

  • Error while running tcode wwy1 in r/3

    Hello, I am beginner for Internet Transaction Server (ITS). while running tcode wwy1 in SAP R/3, ther is an ABAP runtime error as below. An exception occurred. This exception is dealt with in more detail below         . The exception, which is assign

  • How to resend data if WS down? (file - PI - WS)

    Hi all, I have following scenario: File -> PI -> Oracle Webservice My doubt is how to control the error when the call to WS fails? (bc WS is down or whatever..) Sender CC is setted up to delete file when process finishes. but what happens when data c

  • Scheduling agreements with time-independent cond are not supported - Error

    Hi All Processing IDOC IDOC_INPUT_PURSAG_CREATE  for schedule agreements. the BAPI BAPI_SAG_CREATE  is being called internally  to create schdule agreements. I am using this BADI  ME_PROCESS_OUT_CUS to update the field EKKO-STAKO for time dependent c

  • Multipoint 2012 upgrade to r2?

    Has anyone heard if there is an upgrade path for Multipoint 2012 to get the Server 2012 r2 enhancements?

  • Edit advanced table record

    Hi, Can any body tell me how i edit particular row in advaned table using single selection. when i click on particular record in table it converts into editable field. plz send me code and brief description for this. Thank u very much.... Thanks, joy