Iphone5 upgrade restore problems
I was asked to upgrade my iphone5 (May3 upgrade) and how I have to restore to factory set up and lose all data. Is that right?
Hi nledgerwood,
If you are asking if you have to restore your iPhone to update, the answer is "not technically". You can easily update your iPhone by going to Settings > General > Software Update. We definitely recommend doing a backup with either iTunes or iCloud before performing any software updates.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
Thanks,
Matt M.
Similar Messages
-
tried upgrading my iPhone 4 software and it failed. Restore failed with a code -1 Now phone won't work, upgrade or restore.... suggestions?
Hi nledgerwood,
If you are asking if you have to restore your iPhone to update, the answer is "not technically". You can easily update your iPhone by going to Settings > General > Software Update. We definitely recommend doing a backup with either iTunes or iCloud before performing any software updates.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
Thanks,
Matt M. -
I upgraded fro iphone4 to iphone5. i restored from backup in iCloud, and almost everything is there perfectly. there was one app on the phone, which i clicked on to finish the install, but it then disappeared. in my iTunes, under library/apps, this app still shows there. how do i reinstall this app. it was a paid app, and i searched the app store, and apparently it is no longer there.
any help would be greatly appreciated.It appears to be fixed, he had multiple versions of iTunes installed (since he put his iTunes in a different folder) the iTunes icon launched the old iTunes, even though the new was installed. it's working now.
-
A few months ago, while on the 3G network, my iPhone 3GS starting turning off randomly when I was using safari or an online app and the battery was somewhere around 5-20%. When this happened the only way to get the phone back on was by fully charging it which sometimes took a few hours even. It wasn't a big deal at the time because it was infrequent and while the phone was at a low battery %. However, in the past few months, around the time I upgraded to iOS 5.1 it started happened more and more often and at higher and higher battery percentages. It is now at a point where my phone shuts off every time I connect to the 3G network regardless of what my battery life is. I have called Rogers several times to complain about this and I have been told it is because of the battery for the most part but I don’t buy it; the problem has got to be more significant than the battery alone because I can listen to music and send texts at anytime and fully use the internet when I am connected to Wi-Fi. I more recently talked to someone in tech support from Rogers who said my phone cannot support the iOS 5.1 software and that is why it is crashing. They also asked if my phone was heating up more now than in the past and it is. They said this was further evidence that my phone was couldn't handle the new software and was basically on overload. I was told to the best solution was to "Back Up" my iPhone then do a full "Restore". Here is where my next problem comes along. I cannot "Restore" my iPhone without doing an upgrade and every time I attempt to "Upgrade & Restore" an error message pops up that says "There was a problem downloading the software for the iPhone "...". The network connection timed out/was reset. -Make sure your network settings are correct and your network connection is active, or try again later". I have followed all of the protocol that is readily available online to address this problem but still no success. I disabled my firewall and anti-virus programs, I have ensured my connection is active and stable, I have upgraded to the newest iTunes, I have uninstalled iTunes and all apple programs in the correct order then reinstalled iTunes, I have disabled my DNS cache. Nothing works.
If you have any advise whatsoever please share as it would be greatly appreciated.
ThanksI was actually able to upgrade to the newest software, iOS 5.1.1 without connecting to my computer/iTunes but rather directly through my phone when I was home on Wi-Fi. After the upgrade I plugged my phone into a different USB port at the back of my computer and was able to do a full restore. I really don't think the USB port had anything to do with it because I use the same front USB port all the time with my external hard drive and other devices wuth no problems at all; regardless of what the actual solution was, I am now able to connect to iTunes and upgrade/restore without any problems so that half of my problem is resolved.
I have yet to leave my house since doing the upgrade/restore so I am not sure if the problem with my phone crashing when I use the interent on the 3G is still an issue. I will test it today and tomorrow and give you an update.
Thanks -
My iphone5 got a problem of getting switched off and on automatically. I can see my screen getting faded and then i can see the pink vertical lines before it switches off. After about 10 seconds it switches on again.
Hi sumit1310,
Thanks for visiting Apple Support Communities.
I'd start with these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Regards,
Jeremy -
So I decided to restore my new 2011 21.5 inch imac back to osx lion, I decided this because apparently my macintosh hd wont let my partition it in anyway and i cant put windows on here unless I do a fresh install of lion, then I can do boot camp.
So I booted into the recovery manager option when you start up your computer and I clicked on restore osx lion.
It took about 6 hours to download, and then the computer rebooted, and now I dont know what to do, I went back to the restore lion option in that menu and it makes me download it all again.
Does anyone know what I can do?
Id be happy if someone could help with my partitioning problem if they cant help with my restore problem.
Thanks for the time,
DanLion Recovery Assistant should only take a few minutes to download unless you're on the slowest Internet connection known to man. Also OS X is NOT like MS Windows that has to be reinstalled at every hickup. It is INCREDIBLY stable. On the computer I'm using right now in the 4+ years I've owned it it has NEVER needed the OS reinstalled and is totally stable. I have upgraded it from Tiger to Leopard to Snow Leopard and now Lion. It has been through countless updates and still continues to work like it is a new machine.
-
R/Sir, I want to onow that can I upgrade/restore mu iPhone4 in another country (India) if this is purchased into another country (Ukraine)?
When iOS 6.1.3 was released, than I successfully upgrade the iOS in India.
Thanks n RegardsBecause currentyl i'm using iOS 6.1.3 in my iPhone4 and want to upgrade it with iOS 7.0. but with iTunes i'm unable to do it due to error code 3194.
I tried everything to solve that problem. Like :
- tried to upgrade it into 5 different computer with 3 different type of internet connections (DSL & broadband),
- uninstall the antivirus and disable firewall,
- change the dns server from default to google public dns server,
- tried "metsh winsock reset" and "ipconfig /flushdns",
- tried to restore with same iOS (6.1.3),
- download latest version of iTunes 11.1,
- fully update my OS,
- also tried to update/restore from recovery mode/DFU mode.
Etc etc
But still problem remains same (error code 3194).
Thanks & Regards -
OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!
Do you get this window when you hold down the Command+Option keys and launch iPhoto?
If not then you're not holding down both keys long enough.
OT -
When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto." Whether I hit Quit or Upgrade the problem is not fixed. Any suggestions? Yes, I have tried Command Option iPhoto..no luck. I think I may have hit Upgrade the first time. I really need this to be fixed ASAP. Thanks for your help.
Assuming iPhoto 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Hello,i just bought iPhone5,i restored from back up..everything is fine BUT my 92 songs does not appear on my ip5.. i saw a couple tatourlis that didnt help.. Wanted to get some answers if anybody would be so kind!!!
You need to return it to the seller and get your money back. You cannot reset or use the device with another AppleID installed unless you know the password for that ID.
If the device has been jailbroken, no one on here can give you any further help...the Terms of Use prohibit us from doing so. -
Apple care i want your help . i got a new that someone stock of iphone5s about battery problem . My ip5s is decrese batterry so fast . Can you help me please? you can check to IME ? plz
Apple representatives don't respond to anyone in this forum. It's just user-to-user. Go here to check support options (going to Apple store, calling Apple support, etc.): https://getsupport.apple.com/ProductSelector.action
-
Logic Pro 8 upgrade MAJOR PROBLEM
I bought a powerpcg5 and have been using Logic Pro 8. I dont have any original packaging since i moved and i lost it. My brother tried pirating Logic Pro 9 and it removed my Logic Pro 8 registration information which caused me to lose my serial. I try opening Logic 8 and it asks me to register and enter the serial number which i dont have. I am in dire need as i run a studio. I need help ASAP!
-ThanksLogic Pro 8 upgrade MAJOR PROBLEM
There was never a problem since you tried to upgrade from a pirated copy of Logic 9
Why did you even think this could go well?
I dont have any original packaging since i moved and i lost it.
Did you check Lost and Found?
I am in dire need as i run a studio.
Yet, you let your brother load a pirated copy of Logic 9.
I need help ASAP!
You really don't need help.
Why is it that when I see POSTS like these that the person registers the same day. -
Restore problem after upgrading, how to read the b...
Hi there,
I've a N95 and had Software version V11 on it. I made a backup and everything went well.
I then upgraded my N95 to V20 (not V12, i only could see V20) and tried to restore the backup afterwards...
Now the restore starts ok but after 67% it stops totally....
Anyone familiar with this ?
Then i read something about first upgrading to V12 then make a backup again (after a restore) because this would be compatable with v20 ?????
I now have V20 but no "restore", is there a way to "read out" the backup file ans selectivily restore items ?
thanks in advance,Hi.
I am having the same problem now. When it restored, I can't reinstall PC Suite because fail to remove the new version. I tried removing via Control Panel. It was removed but yet it says fail to uninstall PC Suite. How else do you uninstall the PC Suite if not via Control Panel/ Add Remove Programs.
I tried installing the older version of the PC Suite but then it says that it cannot be done because there is a newer version installed.
Well, don't know what to do because I have tried getting advise from friends and that also fails.
Anyway, if there is anybody who can assist, I would be most grateful.
Cheers -
[SOLVED]After yesterday's upgrade screen problem
So, yesterday i have upgraded to the newest kernel and udev. Now, the problem is that (i have XFCE) when laptop goes into "switch off screen" mode (in xfce4-power-manager) i cannot recall the screen back to normal (it remains black). I have to suspend it and wake it up in order the screen is visible/normal again (haven't tried to just kill X).
/var/log/messages:
Nov 10 14:42:27 localhost -- MARK --
Nov 10 15:21:01 localhost -- MARK --
Nov 10 15:41:01 localhost -- MARK --
Nov 10 16:12:08 localhost saso: ACPI group/action undefined: hotkey / ATK0100:00
Nov 10 16:12:08 localhost saso: ACPI group/action undefined: video/switchmode / VMOD
Nov 10 16:12:10 localhost saso: ACPI group/action undefined: hotkey / ATK0100:00
Nov 10 16:12:10 localhost saso: ACPI group/action undefined: video/switchmode / VMOD
Nov 10 16:12:16 localhost acpid: client 1616[0:100] has disconnected
Nov 10 16:12:23 localhost acpid: client connected from 1616[0:100]
Nov 10 16:12:23 localhost acpid: 1 client rule loaded
Nov 10 16:12:27 localhost kernel: [44163.481659] EXT4-fs (sda1): re-mounted. Opts: commit=0
Nov 10 16:12:27 localhost kernel: [44163.489933] EXT4-fs (sda2): re-mounted. Opts: commit=0
Nov 10 16:12:27 localhost kernel: [44163.499653] EXT4-fs (sda3): re-mounted. Opts: commit=0
Nov 10 16:12:28 localhost dhcpcd[5940]: sending signal 1 to pid 5326
Nov 10 16:12:28 localhost dhcpcd[5940]: waiting for pid 5326 to exit
Nov 10 16:12:28 localhost dhcpcd[5326]: received SIGHUP, releasing
Nov 10 16:12:28 localhost dhcpcd[5326]: wlan0: releasing lease of 192.168.1.3
Nov 10 16:12:28 localhost dhcpcd[5326]: wlan0: removing interface
Nov 10 16:12:28 localhost kernel: [44164.828910] cfg80211: Calling CRDA to update world regulatory domain
Nov 10 16:12:28 localhost kernel: [44164.913810] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:28 localhost kernel: [44164.994702] ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 10 16:12:28 localhost kernel: [44165.101603] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:28 localhost kernel: [44165.162838] ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 10 16:12:41 localhost kernel: [44165.504492] PM: Syncing filesystems ... done.
Nov 10 16:12:41 localhost kernel: [44165.510675] Freezing user space processes ... (elapsed 0.01 seconds) done.
Nov 10 16:12:41 localhost kernel: [44165.522325] Freezing remaining freezable tasks ... (elapsed 1.09 seconds) done.
Nov 10 16:12:41 localhost kernel: [44166.615763] Suspending console(s) (use no_console_suspend to debug)
Nov 10 16:12:41 localhost kernel: [44166.616477] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Nov 10 16:12:41 localhost kernel: [44166.629860] sd 0:0:0:0: [sda] Stopping disk
Nov 10 16:12:41 localhost kernel: [44166.642540] ATL1E 0000:03:00.0: PCI INT A disabled
Nov 10 16:12:41 localhost kernel: [44166.732640] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Nov 10 16:12:41 localhost kernel: [44167.018971] PM: suspend of devices complete after 402.827 msecs
Nov 10 16:12:41 localhost kernel: [44167.059129] PM: late suspend of devices complete after 40.150 msecs
Nov 10 16:12:41 localhost kernel: [44167.059309] ACPI: Preparing to enter system sleep state S3
Nov 10 16:12:41 localhost kernel: [44167.257307] PM: Saving platform NVS memory
Nov 10 16:12:41 localhost kernel: [44167.257797] Disabling non-boot CPUs ...
Nov 10 16:12:41 localhost kernel: [44167.259218] CPU 1 is now offline
Nov 10 16:12:41 localhost kernel: [44167.259707] Extended CMOS year: 2000
Nov 10 16:12:41 localhost kernel: [44167.259707] ACPI: Low-level resume complete
Nov 10 16:12:41 localhost kernel: [44167.259707] PM: Restoring platform NVS memory
Nov 10 16:12:41 localhost kernel: [44167.259707] Extended CMOS year: 2000
Nov 10 16:12:41 localhost kernel: [44167.259707] Enabling non-boot CPUs ...
Nov 10 16:12:41 localhost kernel: [44167.266546] Booting Node 0 Processor 1 APIC 0x1
Nov 10 16:12:41 localhost kernel: [44167.259183] Initializing CPU#1
Nov 10 16:12:41 localhost kernel: [44167.259183] Calibrating delay loop (skipped) already calibrated this CPU
Nov 10 16:12:41 localhost kernel: [44167.277996] NMI watchdog enabled, takes one hw-pmu counter.
Nov 10 16:12:41 localhost kernel: [44167.278933] Switched to NOHz mode on CPU #1
Nov 10 16:12:41 localhost kernel: [44167.282318] CPU1 is up
Nov 10 16:12:42 localhost kernel: [44167.283293] ACPI: Waking up from system sleep state S3
Nov 10 16:12:42 localhost kernel: [44168.297514] PM: early resume of devices complete after 1.403 msecs
Nov 10 16:12:42 localhost kernel: [44168.297649] usb usb3: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.297719] usb usb4: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.297793] usb usb5: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.299179] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Nov 10 16:12:42 localhost kernel: [44168.299334] usb usb6: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.299374] usb usb7: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.299413] usb usb8: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.305605] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Nov 10 16:12:42 localhost kernel: [44168.355074] Extended CMOS year: 2000
Nov 10 16:12:42 localhost kernel: [44168.362432] sd 0:0:0:0: [sda] Starting disk
Nov 10 16:12:42 localhost kernel: [44168.632301] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 10 16:12:42 localhost kernel: [44168.655037] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44168.685480] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44168.698272] ata2.00: configured for UDMA/100
Nov 10 16:12:42 localhost kernel: [44168.815660] usb 6-2: reset low speed USB device number 3 using uhci_hcd
Nov 10 16:12:42 localhost kernel: [44170.172346] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 10 16:12:42 localhost kernel: [44170.174103] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Nov 10 16:12:42 localhost kernel: [44170.174434] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44170.178450] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Nov 10 16:12:42 localhost kernel: [44170.178782] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44170.180642] ata1.00: configured for UDMA/133
Nov 10 16:12:42 localhost kernel: [44170.224518] PM: resume of devices complete after 1926.927 msecs
Nov 10 16:12:42 localhost kernel: [44170.224850] Restarting tasks ... done.
Nov 10 16:12:42 localhost kernel: [44170.238561] video LNXVIDEO:00: Restoring backlight state
Nov 10 16:12:45 localhost kernel: [44173.423488] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:45 localhost laptop-mode: Laptop mode
Nov 10 16:12:45 localhost laptop-mode: enabled, not active
Nov 10 16:12:46 localhost kernel: [44174.630668] CE: hpet increased min_delta_ns to 30169 nsec
Nov 10 16:12:46 localhost kernel: [44174.885331] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:46 localhost kernel: [44174.928328] ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 10 16:12:46 localhost kernel: [44175.030767] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:47 localhost kernel: [44175.496506] EXT4-fs (sda1): re-mounted. Opts: commit=0
Nov 10 16:12:47 localhost kernel: [44175.704900] EXT4-fs (sda2): re-mounted. Opts: commit=0
Nov 10 16:12:47 localhost kernel: [44175.708047] EXT4-fs (sda3): re-mounted. Opts: commit=0
Nov 10 16:12:47 localhost acpid: client 1616[0:100] has disconnected
Nov 10 16:12:47 localhost saso: ACPI group/action undefined: processor / LNXCPU:00
Nov 10 16:12:47 localhost acpid: client connected from 1616[0:100]
Nov 10 16:12:47 localhost acpid: 1 client rule loaded
Nov 10 16:12:47 localhost saso: ACPI group/action undefined: processor / LNXCPU:01
Nov 10 16:12:47 localhost laptop-mode: Laptop mode
Nov 10 16:12:47 localhost laptop-mode: enabled,
Nov 10 16:12:47 localhost laptop-mode: not active [unchanged]
Nov 10 16:12:47 localhost saso: ACPI action undefined: PNP0C0A:00
Nov 10 16:12:47 localhost laptop-mode: Laptop mode
Nov 10 16:12:47 localhost laptop-mode: enabled,
Nov 10 16:12:47 localhost laptop-mode: not active [unchanged]
Nov 10 16:12:49 localhost kernel: [44177.453758] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Nov 10 16:12:49 localhost dhcpcd[6755]: version 5.2.12 starting
Nov 10 16:12:50 localhost dhcpcd[6755]: wlan0: broadcasting for a lease
Nov 10 16:12:50 localhost dhcpcd[6755]: wlan0: offered 192.168.1.3 from 192.168.1.1
Nov 10 16:12:50 localhost dhcpcd[6755]: wlan0: acknowledged 192.168.1.3 from 192.168.1.1
Nov 10 16:12:50 localhost dhcpcd[6755]: wlan0: checking for 192.168.1.3
Nov 10 16:12:55 localhost dhcpcd[6755]: wlan0: leased 192.168.1.3 for 86400 seconds
Nov 10 16:12:55 localhost dhcpcd[6755]: forked to background, child pid 6778
/var/log/kernel.log:
Nov 10 13:29:37 localhost kernel: [34393.536524] oosplash.bin[28937]: segfault at 4d0 ip b779fa1b sp bf9ffbe0 error 4 in libX11.so.6.3.0[b776c000+132000]
Nov 10 16:12:27 localhost kernel: [44163.481659] EXT4-fs (sda1): re-mounted. Opts: commit=0
Nov 10 16:12:27 localhost kernel: [44163.489933] EXT4-fs (sda2): re-mounted. Opts: commit=0
Nov 10 16:12:27 localhost kernel: [44163.499653] EXT4-fs (sda3): re-mounted. Opts: commit=0
Nov 10 16:12:28 localhost kernel: [44164.769066] wlan0: deauthenticating from 00:1d:60:19:9c:51 by local choice (reason=3)
Nov 10 16:12:28 localhost kernel: [44164.828910] cfg80211: Calling CRDA to update world regulatory domain
Nov 10 16:12:28 localhost kernel: [44164.913810] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:28 localhost kernel: [44164.994333] ATL1E 0000:03:00.0: irq 46 for MSI/MSI-X
Nov 10 16:12:28 localhost kernel: [44164.994702] ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 10 16:12:28 localhost kernel: [44165.101603] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:28 localhost kernel: [44165.162190] ATL1E 0000:03:00.0: irq 46 for MSI/MSI-X
Nov 10 16:12:28 localhost kernel: [44165.162838] ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 10 16:12:41 localhost kernel: [44165.504492] PM: Syncing filesystems ... done.
Nov 10 16:12:41 localhost kernel: [44165.510538] PM: Preparing system for mem sleep
Nov 10 16:12:41 localhost kernel: [44165.510675] Freezing user space processes ... (elapsed 0.01 seconds) done.
Nov 10 16:12:41 localhost kernel: [44165.522325] Freezing remaining freezable tasks ... (elapsed 1.09 seconds) done.
Nov 10 16:12:41 localhost kernel: [44166.615714] PM: Entering mem sleep
Nov 10 16:12:41 localhost kernel: [44166.615763] Suspending console(s) (use no_console_suspend to debug)
Nov 10 16:12:41 localhost kernel: [44166.616477] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Nov 10 16:12:41 localhost kernel: [44166.629860] sd 0:0:0:0: [sda] Stopping disk
Nov 10 16:12:41 localhost kernel: [44166.642540] ATL1E 0000:03:00.0: PCI INT A disabled
Nov 10 16:12:41 localhost kernel: [44166.732640] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Nov 10 16:12:41 localhost kernel: [44167.018971] PM: suspend of devices complete after 402.827 msecs
Nov 10 16:12:41 localhost kernel: [44167.059129] PM: late suspend of devices complete after 40.150 msecs
Nov 10 16:12:41 localhost kernel: [44167.059309] ACPI: Preparing to enter system sleep state S3
Nov 10 16:12:41 localhost kernel: [44167.257307] PM: Saving platform NVS memory
Nov 10 16:12:41 localhost kernel: [44167.257797] Disabling non-boot CPUs ...
Nov 10 16:12:41 localhost kernel: [44167.259218] CPU 1 is now offline
Nov 10 16:12:41 localhost kernel: [44167.259707] Extended CMOS year: 2000
Nov 10 16:12:41 localhost kernel: [44167.259707] ACPI: Low-level resume complete
Nov 10 16:12:41 localhost kernel: [44167.259707] PM: Restoring platform NVS memory
Nov 10 16:12:41 localhost kernel: [44167.259707] CPU0: Thermal monitoring handled by SMI
Nov 10 16:12:41 localhost kernel: [44167.259707] Extended CMOS year: 2000
Nov 10 16:12:41 localhost kernel: [44167.259707] Enabling non-boot CPUs ...
Nov 10 16:12:41 localhost kernel: [44167.266546] Booting Node 0 Processor 1 APIC 0x1
Nov 10 16:12:41 localhost kernel: [44167.266548] smpboot cpu 1: start_ip = 93000
Nov 10 16:12:41 localhost kernel: [44167.259183] Initializing CPU#1
Nov 10 16:12:41 localhost kernel: [44167.259183] Calibrating delay loop (skipped) already calibrated this CPU
Nov 10 16:12:41 localhost kernel: [44167.259183] CPU1: Thermal monitoring handled by SMI
Nov 10 16:12:41 localhost kernel: [44167.277996] NMI watchdog enabled, takes one hw-pmu counter.
Nov 10 16:12:41 localhost kernel: [44167.278933] Switched to NOHz mode on CPU #1
Nov 10 16:12:41 localhost kernel: [44167.282318] CPU1 is up
Nov 10 16:12:42 localhost kernel: [44167.283293] ACPI: Waking up from system sleep state S3
Nov 10 16:12:42 localhost kernel: [44168.296199] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0xdc01)
Nov 10 16:12:42 localhost kernel: [44168.296208] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
Nov 10 16:12:42 localhost kernel: [44168.296456] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Nov 10 16:12:42 localhost kernel: [44168.296464] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
Nov 10 16:12:42 localhost kernel: [44168.296500] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a)
Nov 10 16:12:42 localhost kernel: [44168.296517] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
Nov 10 16:12:42 localhost kernel: [44168.296528] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
Nov 10 16:12:42 localhost kernel: [44168.296536] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100504)
Nov 10 16:12:42 localhost kernel: [44168.296592] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x20200, writing 0x20205)
Nov 10 16:12:42 localhost kernel: [44168.296609] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
Nov 10 16:12:42 localhost kernel: [44168.296620] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
Nov 10 16:12:42 localhost kernel: [44168.296628] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
Nov 10 16:12:42 localhost kernel: [44168.296684] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x20200, writing 0x20205)
Nov 10 16:12:42 localhost kernel: [44168.296698] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x1fff1, writing 0x7df17de1)
Nov 10 16:12:42 localhost kernel: [44168.296712] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
Nov 10 16:12:42 localhost kernel: [44168.296720] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
Nov 10 16:12:42 localhost kernel: [44168.297063] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
Nov 10 16:12:42 localhost kernel: [44168.297137] ath9k 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
Nov 10 16:12:42 localhost kernel: [44168.297165] ath9k 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfeaf0004)
Nov 10 16:12:42 localhost kernel: [44168.297172] ath9k 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Nov 10 16:12:42 localhost kernel: [44168.297182] ath9k 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
Nov 10 16:12:42 localhost kernel: [44168.297234] ATL1E 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
Nov 10 16:12:42 localhost kernel: [44168.297265] ATL1E 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Nov 10 16:12:42 localhost kernel: [44168.297274] ATL1E 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Nov 10 16:12:42 localhost kernel: [44168.297514] PM: early resume of devices complete after 1.403 msecs
Nov 10 16:12:42 localhost kernel: [44168.297614] i915 0000:00:02.0: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.297619] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.297649] usb usb3: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.297692] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.297719] usb usb4: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.297766] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.297793] usb usb5: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.297807] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299179] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Nov 10 16:12:42 localhost kernel: [44168.299187] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299238] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
Nov 10 16:12:42 localhost kernel: [44168.299307] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299334] usb usb6: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.299347] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299374] usb usb7: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.299387] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299413] usb usb8: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.299428] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299473] pci 0000:00:1e.0: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299489] ahci 0000:00:1f.2: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.305605] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Nov 10 16:12:42 localhost kernel: [44168.305613] ATL1E 0000:03:00.0: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.305680] ATL1E 0000:03:00.0: irq 46 for MSI/MSI-X
Nov 10 16:12:42 localhost kernel: [44168.355074] Extended CMOS year: 2000
Nov 10 16:12:42 localhost kernel: [44168.362432] sd 0:0:0:0: [sda] Starting disk
Nov 10 16:12:42 localhost kernel: [44168.632301] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 10 16:12:42 localhost kernel: [44168.655032] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Nov 10 16:12:42 localhost kernel: [44168.655037] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44168.685475] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Nov 10 16:12:42 localhost kernel: [44168.685480] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44168.698272] ata2.00: configured for UDMA/100
Nov 10 16:12:42 localhost kernel: [44168.815660] usb 6-2: reset low speed USB device number 3 using uhci_hcd
Nov 10 16:12:42 localhost kernel: [44170.172346] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 10 16:12:42 localhost kernel: [44170.174103] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Nov 10 16:12:42 localhost kernel: [44170.174430] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Nov 10 16:12:42 localhost kernel: [44170.174434] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44170.178450] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Nov 10 16:12:42 localhost kernel: [44170.178777] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Nov 10 16:12:42 localhost kernel: [44170.178782] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44170.180642] ata1.00: configured for UDMA/133
Nov 10 16:12:42 localhost kernel: [44170.224518] PM: resume of devices complete after 1926.927 msecs
Nov 10 16:12:42 localhost kernel: [44170.224848] PM: Finishing wakeup.
Nov 10 16:12:42 localhost kernel: [44170.224850] Restarting tasks ... done.
Nov 10 16:12:42 localhost kernel: [44170.238561] video LNXVIDEO:00: Restoring backlight state
Nov 10 16:12:45 localhost kernel: [44173.423488] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:46 localhost kernel: [44174.630668] CE: hpet increased min_delta_ns to 30169 nsec
Nov 10 16:12:46 localhost kernel: [44174.885331] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:46 localhost kernel: [44174.927923] ATL1E 0000:03:00.0: irq 46 for MSI/MSI-X
Nov 10 16:12:46 localhost kernel: [44174.928328] ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 10 16:12:46 localhost kernel: [44175.030767] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:47 localhost kernel: [44175.496506] EXT4-fs (sda1): re-mounted. Opts: commit=0
Nov 10 16:12:47 localhost kernel: [44175.704900] EXT4-fs (sda2): re-mounted. Opts: commit=0
Nov 10 16:12:47 localhost kernel: [44175.708047] EXT4-fs (sda3): re-mounted. Opts: commit=0
Nov 10 16:12:49 localhost kernel: [44177.448823] wlan0: authenticate with 00:1d:60:19:9c:51 (try 1)
Nov 10 16:12:49 localhost kernel: [44177.450829] wlan0: authenticated
Nov 10 16:12:49 localhost kernel: [44177.450861] wlan0: associate with 00:1d:60:19:9c:51 (try 1)
Nov 10 16:12:49 localhost kernel: [44177.453381] wlan0: RX AssocResp from 00:1d:60:19:9c:51 (capab=0x411 status=0 aid=2)
Nov 10 16:12:49 localhost kernel: [44177.453385] wlan0: associated
Nov 10 16:12:49 localhost kernel: [44177.453758] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Nov 10 16:12:59 localhost kernel: [44188.252291] wlan0: no IPv6 routers present
Upgraded packages:
[2011-11-09 12:04] upgraded linux (3.0.7-1 -> 3.1-4)
[2011-11-09 12:04] upgraded linux-headers (3.0.7-1 -> 3.1-4)
[2011-11-09 12:04] upgraded lirc-utils (1:0.9.0-6 -> 1:0.9.0-8)
[2011-11-09 12:04] upgraded mpfr (3.1.0.p1-1 -> 3.1.0.p3-1)
[2011-11-09 12:04] upgraded net-tools (1.60.20110819cvs-1 -> 1.60.20110819cvs-3)
[2011-11-09 12:04] upgraded pixman (0.22.2-1 -> 0.24.0-1)
[2011-11-09 12:04] upgraded udev (174-1 -> 175-1)
[2011-11-09 12:04] upgraded wine (1.3.32-1 -> 1.3.32-2)
/var/log/Xorg.0.log:
http://dl.dropbox.com/u/38176672/Xorg.0.log
/var/log/dmesg.log:
http://dl.dropbox.com/u/38176672/dmesg.log
Last edited by Shark (2011-12-01 12:49:45)hi,
I have the same problem(intel Corporation Mobile 915GM). And I found the following can solve the half of the problem
Section "Device"
Identifier "Device0"
Driver "vesa" # <---replacing intel by vesa
EndSection
But after "kill X", the screen of the framebuffer becomes quite horrible as showed in the pic. -
After iOS 8 upgrade restore from backup not working
Hi,
yesterday I've upgraded to iOS8. After three tries it worked.
But now I'm not able to restore my iPhone5 from Backup. It starts restoring. But the when it's done I've receive the error message without an error nr.
"itunes could not restore the iphone because an error occurred"
Thats it
I've rewetted the iphone, tried on another computer to restore the backup, tried a different internet connection. Nothing. Everywhere the same issue. I've also tried to use a half year old backup just for fun. But the same issue.
I've disconnected other USB devices. No chance
Does anybody has a useful idea?
Thanks.Hello becksen,
Thanks for using Apple Support Communities.
To troubleshoot this issue with restoring an iTunes backup to your iPhone please follow the steps in the article linked to below.
iOS: If you can't back up or restore from a backup in iTunes
Take care,
Alex H.
Maybe you are looking for
-
Is it possible to create 3D views in Reader XI?
Reader XI has the 3D camera icon, but it is greyed out. I have looked through all the preference settings but can't find anything to enable it. I have also selected "Enable for commenting and Analysis in Adobe Reader" in Acrobat 9 Pro. Thanks in adva
-
Report painter: CCSS: will pick up statistical posting?
Hello Gents, will a painter sitting on CCSS table will pick statistical postings? (statistical as when journal entries are made with cost element type 11, posted on cost centers) Thanks for your help KR - Loï
-
How to delete destinations in Google Map app
New to Ellipsis7. My Google Map app has destinations in it that I'd like to delete as they were only one time usage. Can't find instructions on how to delete. Help!
-
VZW not honering advertised pricing
I recently upgraded my "feature" phone and my wife's feature phone to two new free iPhone 4 smart phones using Verizon's website. During the checkout process I confirmed with customer service that I would be charged $80.00 per month (plus taxes) for
-
RECDV Max min total 100 700 100 600 200 300 400 500 600 700