IPhoto suddenly not printing four 6x4 borderless prints on A4

Hi! iPhoto 11 has suddenly stopped printing four 6x4 borderless prints on one sheet of A4. If I set the print size to 3x5 I can see all four prints on the A4 preview but when I change print size to 4x6 only two prints appear on the preview, in the middle with alot of white around them.  I have tried changing the paper size and print size, borders and the settings from the little cog wheel symbol etc.. I am either missing something or there has been a change that now prevents me doing this. Does anyone have any advice or suggestions. Thanks

Yes - do the math
A4
297 x 210 mm
11.7 x 8.3 in
Four 4x6" images are going to be 8x12" (plus some border) or 6x16" (plus some borders) - it is not possible to fit 12" of image on 11.7 inches of paper - and never has been - nothing has changed - the laws of physics still apply exactly as they always have
LN

Similar Messages

  • How do you print a 4x6 borderless print in LR 5?

    How do you print a 4x5 borderless print in LR 5 ?

    Without a lot of information that you have failed to give us, here are some very sketchy instructions:
    1. In the print module, click on Page Setup. In your printer driver screen choose Borderless, choose your paper type and size.
    2. In Lightroom, adjust your cell size it appropriately.
    3. Set your color management options appropriately.
    4. Make sure paper is in your printer.
    5. Print the image.
    If you want more specific help, tell us what OS you are using, what printer, what problems you are experiencing, and anything else that you might feel would give us a clue as to what you have tried to do.

  • Not able to do borderless printing properly

    I have an HP 7960 photo printer.  Just recently it starled leaving about 1/8" blank at the top of a page when bordeless printing is selected.  The rest of the page is fine.  I am running XP service pack 2.  How do I correct the problem.

    What is the size of the photo paper you're using, and what is the dimensions of the photo you're trying to print?
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • Why, after using Firefox for years, can I all of a sudden not get videos on many print articles that have them, when, if I go to Internet Explorer, I can?

    On many web pages, videos that are included in an article, are just large spaces of white with nothing (no video to click on whatsoever) in them. If I open an IE browser, and go to the same article, it displays and plays the video perfectly. I know many people who are experiencing this.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

  • IPhoto suddenly not finding photos since 2010. Should I upgrade?

    iPhoto cannot find all my photos for the last five years. Same on backup drive. Both are external hard drives. I'm sure they are in the drives and in the library. Just the pathway to them not being found. Possible cause - I have not upgraded since iPhoto 7 (I liked it as it was). Should I now upgrade or might I really lose the abitity to get to my photos?
    Graham

    With respect that's not the same problem.
    Create a new thread and supply full details for your issue:
    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Borderless printing with iPhoto/Canon iP8600?

    Does anyone know if it is possible to print borderless photos with iPhoto? I have a new Canon iP8600 that features borderless printing, but I've not been able to get it to work with iPhoto. The paper options for borderless printing are there, but the borderless popup dialog brings up a single greyed out option.
    Any ideas from someone who has this printer (or the 8500)?

    The post must have expired. Here's a step by step process that works fine with my Canon i850 and Epson R200. It's pretty generic.
    <blockquote?<i>Steps for printing 4 x 6 prints from iPhoto:
    1 - crop the photo to 4 x 6 beforehand in iPhoto.
    2 - in Page Setup select your printer, proper page orientation and paper size as 4x6 or 4x6 borderless
    3 - click once on the picture you want to print to make sure it's selected.
    4 - now click on the Print button in iPhoto.
    5 - in the iPhoto print window, select your printer again, select Style = "Standard Prints", Size= 4x6 and click on One photo per page.
    6 - click on the Print button.</block

  • Borderless printing - trailing white edge

    I've far more experience printing from PCs than Macs (used to use QImage on those), and am well aware of issues like overspray/borderless extension settings to rpoduce borderless prints.
    Anyhow I cannot get a 6x4" borderless print to print without as trailing white edge from iPhoto - not sure if this is because there's no page setup menu option.
    When you click print, the first screen shows the photo filling the 'canvas', but if I print there's a 7mm trailing white edge.
    This white edge is also evident if I hit preview rather than printing straight off.
    I can print the photo from Preview/Lightroom with no problems with whta seem to me to be identical settings.
    Printer is a Canon iP5000.
    I don't think iPhoto is centering the image properly on the page as an equal amount of photo is chopped off the top.
    There's at least 1 other thread but no solution on that.
    I'll try the other printers to see if I have problems with those too.
    AC

    Did you ever get a solution to your problem? I was looking into another issue and saw your post. I use a Canon i850 printer and in the print preview window I get a white sliver at the top and right of the image. However, it does not print that way.
    Have you tried going to the Advance print menus and under the Paper Handling-Destination Paper Size menu section checked the radio button "Scale to fit paper size:"?
    Do you Twango?

  • Difficulty  Printing Borderless Prints with Epson C84

    When I had an iMac G3 with OS 9.2 and used the Epson menu for printing, I had no difficulty printing 4x6 inch borderless prints (since that is one of the options on the Epson Menu). But now that I am forced to use the OS 10 printing menu, even when I identify the printer as an Epson C84, crop the photos to fit a 4x6 page and show "0" margins on all sides when selecting 4x6 as paper size, using either iPhoto or Photoshop Elements 3.0, the prints come out with a small white border on all four sides. The Apple Menu with Epson as the chosen printer does not give me an option that says "4 x 6 borderless" when choosing the paper size. Is there something I need to set differently in order to get borderless prints?
    hk Jones

    I also had a problem finding the "Borderless" option in the print dialogue. Here's what Epson Support told me to do -- It worked perfectly. I can now print borderless from either of the two macs sharing my Epson 1280.
    To correct the issue you are experiencing, we will perform a complete
    removal of the files and reinstall the driver.
    REMOVE FILES
    1. Double click on the MAC HARD DRIVE
    2. Double click on the LIBRARY folder
    3. Double click on the PRINTERS folder
    4. Drag the EPSON folder to the trash can
    NOTE If you receive an access denied error message, this indicates that
    you do not have root access. You will need to contact Apple for assistance
    on obtaining Root Access.
    1. Insert your 10.4 CD/DVD, double click on the CD/DVD icon on your
    desktop.
    2. Double click SYSTEM > INSTALLATION > PACKAGES > EPSON PRINTER
    DRIVERS.PKG
    Follow the prompts for the installation, restart your Mac when complete
    Please follow the steps below to install the resident driver for your
    printer in OS 10.4:
    1. Make sure that your printer is turned on and connected to your computer.
    2. Open your PRINTER SETUP UTILITY. This is found in HARD DRIVE,
    APPLICATIONS, UTILITIES directory
    3. If there are any entries for your printer click on them and hit the
    DELETE. Once they are all gone Click ADD, then MORE PRINTERS at the bottom
    of the printer browser.
    4. In the window that appears, select EPSON USB from the drop-down menu at
    the top, then highlight your printer when it appears under NAME , under
    PAGE SETUP select ALL, and then hit ADD.
    5. Quit out of the printer setup utility and try printing from any OS X
    application.
    To set up your printer for borderless printing in OS X please follow the
    steps below.
    After you have installed your printer driver for OS 10, you will need to do
    the following to add extra paper features such as borderless printing
    options:
    1. Go to Printer Setup Utility (found in HD > Applications > Utilities).
    Delete any existing references to the Epson printer from the list.
    2. Go to Add. Select Epson USB for a USB printer or Epson Firewire for a
    Firewire-connected printer.
    3. Highlight the printer name when it appears under Product. Under "Page
    setup" use the up-down arrows and select ALL.
    4. Click Add. The new printer options will now be added to the Printer
    list; you will see the printer name numerous times with different paper
    selections attached. (If you are unable to see the full description you
    will need to extend the name category.)
    5. Highlight the printer name/feature which you wish to use (For example,
    "Stylus Photo 2200 (Sheet feeder-Borderless)") and make it the default.
    Close Printer Setup Utility.
    6. Ensure Classic is not running. Open an OS X application and the file you
    wish to print.
    Setting up borderless prints in an OS X application (NOTE: not all
    applications will show these options)
    1. Click on FILE and PAGE SETUP. Ensure the settings below are adjusted:
    SETTINGS: PAGE ATTRIBUTES
    FORMAT FOR: EPSON STYLUS XXX XXX(BORDERLESS)
    PAPER SIZE: Whichever compatible paper size you wish to use
    (NOTE: borderless printing is not supported on custom paper sizes.)
    Click OK when done.
    2. Click on FILE and PRINT. Ensure the settings below are adjusted:
    PRINTER: Stylus XXX XXX(BORDERLESS)
    PRESETS: STANDARD
    Make any other adjustments needed (on COPIES and PAGES, PRINT SETTINGS,
    etc) and then click PRINT.

  • Borderless printing, Epson stylus photo 820

    Ok, I'm trying to print this: http://www.thecoverproject.net/view.php?cover_id=1716
    On an Epson Stylus Photo 820. I know this printer can do borderless prints, I just can't figure out how. Is this a driver issue or something? Is borderless printing on this printer a PC only feature? Am I missing something entirely?
    Thanks for any help!

    I don't have experience with the Stylus Photo 820, but I do have a Stylus Photo 890 and unfortunately borderless printing is not possible in OS X, even with the latest drivers. I went round and round with this with Epson Tech Support, who kept sending me suggestions that didn't work and finally they admitted that it was just not possible. I doubt that Epson will further update the drivers for these rather elderly printers.
    Bob N.
    Mac Mini 1.5 GHz; iBook 900 mHz; iPod 20 GB   Mac OS X (10.4.8)  

  • No borderless printing; cannot print via imagebrowser...Please...help!

    I can no longer print 4x5 borderless photos (or any photos) from imagebrowser to my i850 canon printer. I have version 6.0.2.38(7L) of Imagebrowser with Leopard installed on my Mac. I select the print option, and then it says to click on Page Setup for borderless printing. The only option I get there is 4x6 (with a border)??? There is no 4x6 borderless like I used to have with the old imagebrowser and system. I set up the print dialogue box to select the "best" picture (used to have a setting for high quality pictures???) and then I click on "Print" and nothing happens. It never goes to printer and I can't cancel or anything. I have to do a force quit. How do I just print a 4x6 borderless print using Imagebrowser on my Mac??????? Any help is greatly appreciated and thanks in advance!!!

    Gary Schnetter wrote:
    I am not sure where to look for these drivers.
    Both the Canon v4.8.3 and Gutenprint v5.1.3 are included with Leopard
    I went to the Canon web site and downloaded the latest driver v4.8.3 and it put it where it needs to go but doesn't tell you where that is.
    It would try to copy them to /Library/Printers/Canon/BJPrinter, but since the same files for this version would already there be, it might not do this unless the file being added are newer. It should also copy the package installer for the 4.8.3 to /Library/Receipts.
    Anyway, when I went back into Imagebrowser I now have a much shorter list of options, plus do have the 4x6 borderless now. I click on Page Setup in Imagebrowser and select this, but when I go out of there and click on "Print" absolutely nothing happens. I still can't print from Imagebrowser. I use Quarkexpress and can print on plain paper fine so I know the printer works, but cannot print from within Imagebrowser for glossy prints. Any ideas what I may need to do?
    Not really. I used v6.1 in my testing. Maybe your v6.0.x has a problem with 10.5. Also, if you upgraded from Tiger to Leopard and didn't do a clean install of ImageBrowser, then maybe this is causing the failed printing.
    You mentioned you can print on plain paper from Quark. Can you print on plain paper from ImageBrowser?
    My last suggestion would be to view the cups error log. With the i850 printer queue open, select Printer then Logs & History. This may give some clues as to why ImageBrowser is not working for you...
    PaHu

  • Upgraded and lost Epson R200 Borderless printer option

    I just upgraded to Tiger on my eMac, and was sailing through everything until I went to print an 8x10 borderless print on my Epson R200. The "sheet-fed_ borderless printer option I used to have was no longer available in any of my apps. I went to print utility to try to add it again and couldn't find it in any list of options, even trying to add it to the list!
    Anyone else had this happen or does anyone know what's going on here?
    Thanks,
    Barry

    My wife can print to my shared printers from her Win XP box borderless all day long, but my new "worlds most advanced operating system equipped dual 2.7 ghz Mac workstation and my G5 iMac can't print a simple borderless photo to save their lives. Epson r200 and a 2200, gimp and epson drivers. So far the only way I have gotten a borderless print is with a demo of $199 PowerRip software (with a big watermark). This function should be included in Tiger, what is going on. Lets all get on Apples case. Ask them why "it just works" on Windows and not on Mac. (little frustrated...)
    Steve

  • Borderless Printing US Letter: Doc Margin Question

    Hi everyone,
    I have a quick question about printing using HP Photosmart 5510 which offers borderless printing. I have inDesign CS 5 and using Mac OS X Lion.
    I'm trying to print a fllyer. After I select my document type to US Letter in inDesign, i placed my jpg flyer (8.5x11) in the document and it fit snug. However, when I selected borderless US letter print, the flyer came out different than what was in inDesign. It seems like inDesign automatically "cropped" the flyer...
    Here is what i mean (1st pic is inDesign, 2nd pic is the actual printed flyer). You can see how it's "cropped." The word Naruko should be a few milimeters away from the border, yet when it's printed, it actually got cut off. What's causing this?

    I don't have any experience with printers that offer borderless printing, but the thing they have to get around is the gripper margin. In offset printing, the gripper pulls the paper through the press, so you can't have image that goes all the way to the edge of the page on the lead edge. That's why people who need borderless printing on press will use a larger page with crops, and bleed the image into the crop area, so that the cutter can cut through bleed, and if the trim is off by a bit, it will still look like it was printed to the edge.
    I know that office printers also have the gripper margin limitation, so I'm not exactly sure how borderless printing is accomplished. Maybe the lead edge is pushed through and grabbed after it's imaged, but that's just a guess. From what I can see in your second image, it looks like the image was placed further down the page than you had intended, which is another limitation to office printers—the fact that there is some amount of drift between where the image is supposed to print and where it actually does. If you pick something on the page and measure from the top edge to it, does it measure the same as it does in InDesign? If it's also a bit lower, then I think you are dealing with the image drifting a bit. If the top is where it should be, I'd double-check that the paper size and the document size aren't off by a bit.

  • Borderless print with Canon MP610 impossible ?

    Hi all,
    I've just bought the new Canon MP610, but can't find how to print without borders.
    For instance, in Safari or any other application, when I choose print, then the "borderless printing" menu, the cursor is greyed. So impossible to print borderless.
    Any idea please ? Thanks !

    You need to download the software called "Easy Photo Print" from the Canon web site.
    I just bought the Canon MP610 also and I found out about this software while I was doing my research for the printer. At the Canon web site just go to where you would go to download the drivers for the MP610 and thats where you will find the software for download!

  • Photosmart 6510 6x4 borderless has half inch strip

    Printer is Photosmart 6520 AIO with nework, wifi,usb connections and everything else under the sun
    Workstation  #1 imac intel core 2 duo 4 gb 2.4 ghz OS x 10.9.1
    Problem:   when printing 6x4 borderless prints, there is a white stripe down the right side in portrait mode or across the top in landscape mode.
    Can this be fixed?  If so, How can I fix it or get it fixed
    TTFN  Sulcata7

    Hi Sulcata7, 
    I can certainly help you with this. There are a couple of possibilities. Can you try changing the print page size from 6x4 to 4x6, I know that seems to be the same thing but reversing the order can effect the orientation. Next, be sure to use 4x6 and not 4x6 tabbed as a print settings. If you do not have tabbed paper but select tabbed in the print setting you will see a line that you wouldn't see if the paper were actually tabbed paper. The document below might be helpful.
    Macintosh: Printing on 102 x 152 mm (4 x 6 inch) Photo Paper in Mac OS v10.5 or Later
    Please let me know if the issue persists, I will be glad to do some additional research. Please include the program you are printing from, and whether or not you are attempting to print borderless, thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Iphoto 08 Will not print 4x6 borderless prints to HP 3210xi All In One

    Hi Folks,
    I've just installed Iphoto 08 and upgraded to the latest version 7.1.2. I've also just installed the latest HP 9.7 Mac drivers released to support 10.5.2 on 2/4/08. However I can not get Iphoto 08 to print 4x6 borderless prints to my HP 3210xi All In One Photo Smart printer.
    I'd appreciate any feedback/suggestions from anyone who is able to get Iphoto 08 to print properly.
    Jim

    Jim:
    I don't have an solution but this printing problem with HD all in ones has been discussed many times. Do a search in this forum for HP All In One or HP 3210xi or other similar search terms and you'll find the various threads where it is discussed. I don't remember if a solution was found in any of them as I don't have an HP and didn't pay much attention.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Maybe you are looking for