Iplanet 5.2 strange quota problem

Dear all
i have iplanet 5.2 , i am having strange problem , qutoacheck and mboxutil -a is reporting e.g user john has 99% quota usage ,
but i login through webmail i see no mail in webmail , nor pop3 is downloading any mails . i can over quota message in logs
please guide im new to iplanet
Regards

Hi,
Try running the command:
reconstruct -q
If this doesn't fix it then what does the following show?
mboxutil -lp 'user/<uid>/*'
Regards,
Shane.

Similar Messages

Strange wifi problem on a brand-new MacBook Pro

Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*

Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either.

Re: [iPlanet-JATO] sp3 jsp compiler problem

Weiguo,
First, Matt is correct, the regular expression tool is perfect for general text
substitution situations, and as a completely independent tool its use is not
restricted to migration situations (or file types for that matter).
Second, I sympathize with the unfortunate trouble you are experiencing due to
Jasper's (perhaps more strict) compilation, but in what way did the iMT
automated translation contribute to these inconsistencies that you cited?
1. Changed the case of the tag attribute to be the same as what's
defined in tld.
example: changed OnClick to onClick
The iMT does not generate any OnClick or onClick clauses per se. In a
translation situation, the only way "OnClick" would have been introduced was if
it had been part of the pre-existing project's "extraHTML" (which was written
by the original customer and just passed through unchanged by the iMT) or if it
was added manually by the post-migration developer.
2. Removed attributes which are not defined in tld.
example: escape attribute only defined in three tags
but in some pages, it's used although it's not defined as an
attribute
of certain tags. The jasper compiler doesn't like it.Can you give soem examples? Is there a definite pattern? Again, this might be
similar to the OnClick situation described above?
3. In an end tag, there can't be any space.
example: </content > doesn't work. </content> works.
Again, the content tag would never have been generated by the iMT. There was no
equivalent in the NetDynamics world, so any content tags in your code must have
been introduced by your developers manually. Its a shame that jasper is so
particular, but the iMT could not help you out here even if we wanted to. The
constants that are used by the iMT are defined in
com.iplanet.moko.jsp.convert.JspConversionConstants. From what I can see, the
only situation of a closing tag with any space in it is
public static final String CLOSE_EMPTY_ELEMENT = " />";
But that should not cause the type of problem you are referring to.
Mike
----- Original Message -----
From: Matthew Stevens
Sent: Thursday, September 06, 2001 10:16 AM
Subject: RE: [iPlanet-JATO] sp3 jsp compiler problem
Weiguo,
Others will chime in for sure...I would highly recommend the Regex Tool from
the iMT 1.1.1 for tackling this type of problem. Mike, Todd and myself have
posted to the group (even recently) on directions and advantages of creating
your own RULES (rules file) in XML for arbitary batch processing of source.
matt
-----Original Message-----
From: weiguo.wang@b...
[mailto:<a href="/group/SunONE-JATO/post?protectID=125056020108194190033029175101192165174144234026000079108238073194105057099246073154180137239239223019162">weiguo.wang@b...</a>]
Sent: Thursday, September 06, 2001 12:25 PM
Subject: [iPlanet-JATO] sp3 jsp compiler problem
Matt/Mike/Todd,
We are trying to migrate to sp3 right now, but have had a lot of
issues with the new jasper compiler.
The following workaround has been employed to solve the issues:
1. Changed the case of the tag attribute to be the same as what's
defined in tld.
example: changed OnClick to onClick
2. Removed attributes which are not defined in tld.
example: escape attribute only defined in three tags
but in some pages, it's used although it's not defined as an
attribute
of certain tags. The jasper compiler doesn't like it.
3. In an end tag, there can't be any space.
example: </content > doesn't work. </content> works.
As I see it, we have two options to go about solving this problem:
1. Write a script which will iterate through all the jsp files and
call jspc on them. Fix the errors manually when jspc fails. Jspc will
flag the line number where an error occurs.
2. Write a utility which scans the jsp files and fix the errors when
they are encountered. We should define what's an error and how to
correct it. It's best if we combine this with solution 1 since we
might miss an error condition.
Actually, there might be another option, which is seeking help from
you guys since you have better understanding of JATO and iAS. Can you
do anything to help us?
We would be happy to hear your thoughts.
At last, I would like to suggest modifying the moko tool so that
these rules are enforced and the generated JSPs work with the new
compiler. This is for the benefit of any new migration projects.
Thanks a lot.
Weiguo
[email protected]
Choose from 1000s of job listings!
[email protected]
[Non-text portions of this message have been removed]

Thanks a lot Matt and Mike for your prompt replies.
I agree completely that iMT doesn't introduce the inconsistencies.
About the three cases I mentioned, the third one happens only in
manually created JSPs. So it has nothing to do with iMT. The first
two are mainly due to the existing HTML code, as you rightly pointed
out.
The reason I made the suggestion is since we know that case 1 and 2
won't pass the japser compiler in sp3, we have to do something about
it. The best place to do this, in my mind, is iMT. Of course, there
might be some twists that make it impossible or difficult to do this
kind of case manipulation or attribute discard.
Weiguo
--- In iPlanet-JATO@y..., "Mike Frisino" <Michael.Frisino@S...> wrote:
Weiguo,
First, Matt is correct, the regular expression tool is perfect for general text substitution situations, and as a completely independent
tool its use is not restricted to migration situations (or file types
for that matter).
>
Second, I sympathize with the unfortunate trouble you are experiencing due to Jasper's (perhaps more strict) compilation, but
in what way did the iMT automated translation contribute to these
inconsistencies that you cited?
>
1. Changed the case of the tag attribute to be the same as what's
defined in tld.
example: changed OnClick to onClick
The iMT does not generate any OnClick or onClick clauses per se. In a translation situation, the only way "OnClick" would have been
introduced was if it had been part of the pre-existing
project's "extraHTML" (which was written by the original customer and
just passed through unchanged by the iMT) or if it was added manually
by the post-migration developer.
>
2. Removed attributes which are not defined in tld.
example: escape attribute only defined in three tags
but in some pages, it's used although it's not defined as an
attribute
of certain tags. The jasper compiler doesn't like it.Can you give soem examples? Is there a definite pattern? Again, this might be similar to the OnClick situation described above?
>
>
3. In an end tag, there can't be any space.
example: </content > doesn't work. </content> works.
Again, the content tag would never have been generated by the iMT. There was no equivalent in the NetDynamics world, so any content tags
in your code must have been introduced by your developers manually.
Its a shame that jasper is so particular, but the iMT could not help
you out here even if we wanted to. The constants that are used by the
iMT are defined in
com.iplanet.moko.jsp.convert.JspConversionConstants. From what I can
see, the only situation of a closing tag with any space in it is
public static final String CLOSE_EMPTY_ELEMENT = " />";
But that should not cause the type of problem you are referring to.
Mike
----- Original Message -----
From: Matthew Stevens
Sent: Thursday, September 06, 2001 10:16 AM
Subject: RE: [iPlanet-JATO] sp3 jsp compiler problem
Weiguo,
Others will chime in for sure...I would highly recommend the Regex Tool from
the iMT 1.1.1 for tackling this type of problem. Mike, Todd and myself have
posted to the group (even recently) on directions and advantages of creating
your own RULES (rules file) in XML for arbitary batch processing of source.
>
matt
-----Original Message-----
From: weiguo.wang@b...
[mailto:<a href="/group/SunONE-JATO/post?protectID=125056020108194190033029175101192165174048139046">weiguo.wang@b...</a>]
Sent: Thursday, September 06, 2001 12:25 PM
Subject: [iPlanet-JATO] sp3 jsp compiler problem
Matt/Mike/Todd,
We are trying to migrate to sp3 right now, but have had a lot of
issues with the new jasper compiler.
The following workaround has been employed to solve the issues:
1. Changed the case of the tag attribute to be the same as
what's
defined in tld.
example: changed OnClick to onClick
2. Removed attributes which are not defined in tld.
example: escape attribute only defined in three tags
but in some pages, it's used although it's not defined as an
attribute
of certain tags. The jasper compiler doesn't like it.
3. In an end tag, there can't be any space.
example: </content > doesn't work. </content> works.
As I see it, we have two options to go about solving this problem:
>>
1. Write a script which will iterate through all the jsp files and
call jspc on them. Fix the errors manually when jspc fails. Jspc will
flag the line number where an error occurs.
2. Write a utility which scans the jsp files and fix the errors when
they are encountered. We should define what's an error and how to
correct it. It's best if we combine this with solution 1 since we
might miss an error condition.
Actually, there might be another option, which is seeking help from
you guys since you have better understanding of JATO and iAS. Can you
do anything to help us?
We would be happy to hear your thoughts.
At last, I would like to suggest modifying the moko tool so that
these rules are enforced and the generated JSPs work with the new
compiler. This is for the benefit of any new migration projects.
Thanks a lot.
Weiguo
[email protected]
Choose from 1000s of job listings!
[email protected]
Service.
>
>
>
[Non-text portions of this message have been removed]

Very Strange Internet Problems

I own a MacBook Pro 15.4 Inch that I purchased about a year and a half ago. I recently upgraded to Leopard and have all the latest updates. I am from the US, and when I am home my internet works fine. However, I am on travel to Seoul, South Korea right now and am having a very strange internet problem.
As far as I can tell, the URLs that I type in to my browser are, sparodially, not translated correctly into the webpages that they are supposed to represent. This problem is probably effective 75% of the time, and the rest of the time my internet works roughly correctly. For instance, when I enter http://www.google.com, instead of being taken to the Google homepage, I am taking to the homepage of Jammin Beats DJ Service, an obscure website about a company in northern Pennsylvania. The actual URL of this website is http://www.jamminbeats.com, but when my internet is malfunctioning, 'jamminbeats' is for all intensive purposes replaced by 'google' (that is, it applies not only to the main page, but to sub pages, so "http://www.google.com/weddings" takes you to "http://www.jamminbeats.com/weddings" and etc). For most other webpages, one of two things happens. Either I am taken to the correct page but it is displayed without any images or frames (just the html text and links), or I am taken to a blank page with the header "Under Construction", which I assume is the default for a page that doesn't exist. This is why it seems as though the URLs are simply being interpretted erroneously.
This problem occurs when connecting both to the wireless and the wired internet at my hotel, and it occurs on both Safari and Firefox, so it is not a connection-specific or browser-specific problem. It may be a problem with the hotel's internet, and as of yet I have not had a chance to test the computer at another location. However, a colleague using an IBM computer has had no problems, and I am currently on a Samsung machine in the business center of the hotel and it is working correctly as well. I have searched extensively online for a similar problem but have come up empty handed, and more than anything, I am confused about what might be causing this problem. The strangest thing is that a fraction of the time, the internet functions normally, but it is usually roughly 15 minutes out of every hour, and eventually I am inevitably taken back to Jammin Beats.
I am a computer science graduate but I still have no idea what would cause this problem. At first I thought it might be a hacker, but if it is, he or she has been at it consistently for 3 days now, and only seems to be targeting my computer. Any ideas or solutions would be greatly appreciated, as I have been forced to resort to the hotel's business center for checking email, doing work, etc. Thanks in advance.

I did consider that, as I was in Beijing last week and there are a number of censored sites. However, in Korea I have had problems with very basic sites like facebook, wall street journal, google, yahoo, Korean google, my hotel's webpage, etc. Further, I have successfully gotten all of these sites to load seemingly at random, and can access them without problems on other computers. The only disconnect seems to be between my MBP and the internet, not between Korean internet and the web. I have toyed around with the network settings, and although sometimes after switching from "Automatic" to a fixed connection I get some sites to work, it usually only lasts a short time and eventually the same sites stop working. I reset my cache regularly to make sure I'm not getting sent to cached sites, but this also doesn't help. Further, my Apple Mail, Skype and AIM accounts jump between being connected and disconnected randomly as well. Again, this is isolated to my own computer, which is why I'm so confused.

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored and updated firmware, deleted the account, anything I could think of, but it's just not accurately downloading the most recent emails.

The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

Strange shutdown problem

Hi,
Last night, I had a strange shutdown problem on my iMac G5 (revB, 20", 2.0 Gig), with 1 Gig RAM, running 10.4.4 with all updates. I had had the computer on most of the day, using it off and on. I shut it down, and left the room. When I came back about an hour later, the fans were running (not rapidly, just at the normal speed they run when the computer is running), but the screen was blank, and the "sleep" light was not on. The computer wouldn't respond to any moving the mouse or to keyboard input. I finally shut it down by holding the power button until the fans shut down. Upon restart, everything was normal, and after using it for a few minutes, I was able to shut it down normally. Has anyone else seen this sort of behavior, and is it normal ? Or am I about to have more problems.
Thanks in advance,
Dave Fritzinger
Honolulu, HI

Hi Dave,
By the sound of it your computer has "hung" during the shutdown process, but at a point in the process where the system's temperature control mechanisms were still operating (otherwise the fans would be running flat out). My guess in this case is that it was probably actually a finder crash.
Various things can prevent proper shutdown. Often USB or FW devices are to blame. USB adsl modems , some scanners and hubs and the occasional printer driver seem to be common causes. Software can be responsible too, though - background virus or drive checkers are probably the most common, but far from the only possible causes ( I seem to remember "SpringCleaning" causing this problem when people moved to Tiger 10.4.2 for example) .
New software or hardware are therefore the first things to look for.
If you haven't installed anything completely new then one possibility may be that something you are using is not compatible with the latest OS update, and needs an upgrade to a driver. Its also possible that this is a "one off" glitch caused by a temporary problem , but if it happens again I'd be taking careful note of anything that you were using in the previous session.
You might also want to use the Console (in Utilities folder) to look at your system and crash logs.
Cheers
Rod

Strange major problem with 975X PowerUp Intel MOBO

I’m suddenly having a strange major problem with a MSI 975X Platinum PowerUP Edition V2.1 MS-7246 Intel socket 775 motherboard. Previously, it had given me no problems at all.
It went like this:
Powered on system in the morning, booting from a cold start.
Hit DEL key to get into the BIOS.
Missed the window and the system booted into Windows normally.
Re-started the system from within Windows.
Hit DEL key to get into the BIOS and was successful the second time.
Hit the ENTER key on the first item “Standard CMOS Features”.
The DATE, TIME and other information was displayed on the next screen, but at this point, the BIOS screen became completely unresponsive to any keyboard input.
The only thing I could do at that point was to power off.
Subsequent power on boot-ups resulted in the system always freezing at the BIOS splash screen after the video card sign-on.
I have switched power supplies, hard drives, keyboards and video cards. I have disconnected everything except the video card, keyboard and one RAM module. I have switched the four RAM modules around and then reduced the RAM to one 256MB module in the proper slot. I even changed the battery on the MOBO, in case it had shorted out and removed and re-seated the BIOS chip. It still halts at the BIOS splash screen.
The BIOS chip can’t be completely dead, because I powered off and pushed the BIOS reset button on the MOBO to reset the BIOS to the factory defaults. When I re-booted, I could tell that it had actually reset to the factory defaults because I had previously set the BIOS to reboot the system on resumption of power and the factory default was to remain off until the power button was pushed, which was now the default.
I’m stumped! All I can think of is to get a new pre-programmed BIOS chip and see if that makes any difference, but I’m not sure this system is even worth the expense with no guarantee of success. Any suggestions on how I might get past the BIOS splash screen or do I for sure have a corrupt BIOS chip?

System specs as per the posting guidelines -
Board: MSI 975X Platinum PowerUP Edition V2.1 MS-7246 Intel socket 775
Bios: Version (can’t recall & can’t check since it won’t go past the BIOS splash screen)
VGA: ASUS EN7600GS nVidia GeForce 7600GS PCI-e 256MB DDR2 (also tried new XFX nVidia
Geforce 210 PCI-e 2.0 512MB DDR3)
PSU: Chiefmax 680W ATX (also tried new OCZ 700W ATX)
CPU: Intel 2.8GHz LGA-775 Core2 Duo Dual-Core Processor
MEM: 4 x Samsung 512MB 1Rx8 PC2-5300U (2GB total)
HDD: Seagate Barracuda 250GB SATA2 (also tried Seagate Barracuda 500GB SATA2)
COOLER: Intel OEM LGA 775 fan/heatsink C25897-001
OC: No
OS: Vista Home Premium 32-bit
I have been through the BIOS reset procedure several times and pretty much as outlined. As I said before, I could tell that it had taken a reset to the factory defaults, because the power on option had changed.

Wrt54g strange signal problem

I have a new wrt54g and I have a strange signal problem. When I am in the house close to the router I only have a good signal (3 bars) but when I take the notebook outside or all the way in the back bedroom I have a excellent signal (5 bars). I am thinking that something in the house might be interfereing with the signal but I have tried changing the channel and still have only 3 bars when in the house, and 6 bars when I take the notebook outside or to the back bedroom. I am using wap but I tried disabling it and still only 3 bars when around the router.
Any thoughts, and thanks in advance.

I tried it all but still the same but I did find this, when I take then computer in the back of the house or outside the signal goes up to excellent and stays there even if i take it back in the front of the house where I previously only had a good signal. But the only way to get a excellent signal is to take it far off from the router but once it does get a excellent signal it will stay there even when I take back around the router, crazy I know.
Any more advise or thoughts?

Strange connection problems -- software or hardware?

I've been experiencing some strange connectivity problems of late, and am wondering if it's a software or hardware issue. I'm running OS-X 10.4.11, and have noticed web-associated "drop-outs" occurring. When I'm browsing, any of the following will happen:
1. the pages will periodically stop loading, or will take forever to load a few final images.
2. the page will load with a different format (completely unformatted, like a throwback to Mosaic!).
3. the page won't load at all, and will instead give me either a "DNS error" message, or will default to my ISP's "We couldn't resolve your page" message.
4. Nothing out of the ordinary happens.
Throughout this process, the connection strength is 100%.
It seems this happens with both Firefox and Safari. Is this an issue with driver software, or is my Airport Card giving out? My computer is about 3 years old.

I have been having intermittent connection problems on several computers over many years now. We have 12 eMacs, all purchased within a few months of each other, all with 10.4.11. Some computers have almost perfect internet connection, but some are constantly losing connection. If the user just waits a few minutes, the network just comes back or if they open system preferences and renew the DHCP lease it comes back as well. We have tried replacing cables, reloading the operating system, repairing permissions, reseting safari... We are all connecting through ethernet cables through wall jacks then to a switch that is connected to our router. Our DSL provider claims it can't be wiring or a problem on their end or they would see it and we would all have problems. I am not super computer literate... Any suggestions for what I should check on the 4 or so computers that are having lots of connection problems?
Thanks for any words of wisdom!!!

Post Moved Strange-wifi-problem-laptops-work-fine...

MOVED http://community.bt.com/t5/Other-BB-Queries/Strange-wifi-problem-laptops-work-fine-phones-dont/td-p/...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Have never heard of that problem before so can only give you an idea of some things to check.
Check in the Homehub management that it is not set to block access to the mobile devices. If you did a factory reset of the hub then it should have cleared any settings but it might be worth checking.
Have you checked that they are connecting to your Homehub and not to BTWifi which would require further log on to get internet access.
What exactly is happening with the devices when you try to connect to the internet. Is it all things to do with the internet or can you connect by 3g?
Have you tried to connect using another router such as at a friends house?

Strange math-problem with LabVIEW 7.1

Hello!
I am using LabVIEW 7.1 and I came to this strange math-problem. Could it be that it is a problem of LabVIEW 7.1?
Ok try this with LabVIEW 7.1:
open a new VI
place a subtract-VI (pallet numerical) on the block diagram and try to subtract 0.2 from 1.6
place a less-VI (pallet compare) on the block diagram and wire a numerical constant 1.4 to input x
wire the result of the subtraction to input y of the comparison
place an LED to the output of the comparison
and start this.
What does it say?
The LED should turn on and this means here that 1.4 would be less than 1.4 .
But I would have expected that 1.4 is not less than 1.4 .
This works also if you add or subtract upto 0.2 to/from the values 1.4 and 1.6 (or equivalent with 0.2) .
If you change the inputs of the comparison then the result is as expected and 1.4 is reported not to be less than 1.4 .
If you compare two constants with the same value 1.4 you will not get the same strange result.
Does anybody have an explanation for this?
Espelkamper

Hello,
For floating point math: Rounding to multiples of 0.1 is problematic as
those numbers are infinite fractions in base2 representation...
So maybe you should change your numbers to integers using fixed point math. If all your input values are in the range of 1.4 to 1.8 you can multiply by 10000 and round to next integer. Then do your comparison on that integer (there's also an 'InRange' function in the comparison palette).
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

A very strange synchronization problem

Hi Everybody,
I would like to get some help regarding a strange synchronization problem that I have found. I have created a java server application and after a lot of testing I have found the following problem:
A certain thread (Thread-A) is stuck forever on a synchornized (objX) line, whereas another thread (Thread-B) every 30 seconds performs a section which is protected by the same synchornized (objX) line.
It seems that the objX is not held by any thread, but Thread-A is stuck forever.
The BUG is reproducible after the server runs about 1 day.
The server is running on Linux machine (Red Hat 7.3) with JVM 1.4 (Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_01-b01)).
I would appreciate any help.
Thanks In Advance,
Idan Zach

This is not a starvation problem since Thread-B performs its job every 30 seconds. The job is very short (I have added log messages before Thread-B starts its job and after it completes the job).
However, the priority of both threads are the same.
Thanks In Advance,
Idan Zach

Very strange power problem...

Hey guys (and girls ofcourse),
I'm having a very strange power problem with my late 2007 2.2Ghz santa rosa macbook.
Can you guys help me determine what the problem could be?
Here's what happened prior, when the macbook was still working. I got home from work, plugged my adapter into the wall, and it started charging. I left it on the table, and when I came back from the diner table I continued working, but suddenly noticed my macbook wasn't charging anymore. (the orange/green led wasn't lighting up but i was able to work on battery power)
I thought it was the poweradapter, so I went to the apple store the next day to lend one to test it. That didn't work, so it's not the adapter.
So then I started thinking it must be the magnetic DC connector. So I ordered that from the guys at ifixit, (since it's out of warranty) but I replaced it and it's not working.
I don't think it's the logic board, because I was able to continue working until I ran out of battery power. And I also don't think it's the battery connector, because if i'm not mistaking, the macbook can run without battery as well, but mine can't anymore.
Now I can't get any life out of my mac anymore...
Might there be something I overlooked?
Any suggestions are definately welcome!
Thanks a lot.
Timo from Belgium.

Hi Timo,
I think i have the same problem, my mac is not working without battery in it. and it wont charge it.
i wrote a post here http://discussions.apple.com/thread.jspa?threadID=2105648&tstart=0
let me know if you have fixed the problem
thanks

Very Strange Focus problem

I've encountered a very strange focus problem that I hope someone can help me
with. In my frame, I have a toolbar and some JTextFields. When I press one of
the toolbar buttons, I do whatever and at the very end I use requestFocusInWindow()
to set the focus to one of the JTextFields. Now here's the strange part. If I don't
touch the keyboard or the mouse, I can see the caret in the JTextField as expected.
As soon as I move the mouse or touch any key, the focus changes to the next
toolbar button. Makes no sense to me. By the way, I'm running 1.4 on Windows NT.

Create a new class ToolbarButton extends JButton where you have the following method:
     * Identifies whether or not this component can receive the focus.
     * A disabled button, for example, would return false.
     * @return true if this component can receive the focus
    public boolean isFocusTraversable() {
       return false;
    }This prevents the buttons from getting keyboard focus, this makes only sense for toolbar buttons.
Cheers,
Taoufik

Very strange MRP Problem

HI ALL
I am having a very strange mrp problem and that is
I created a material with all mrp1and mrp2 requirement,created the info record and source list for that material.I created a reservation for that material which in turn created the deficiency when I did the MD04.I run the MD03,as per re-order point and fix lot size two Preqs created( vendor was not shown in the Preqs even though I established the source list for the material?).I change these Preqs into PurOrds and did the Gr.Every thing fine till here all changes happened in material requirement list(MD04).Now I did one more reservation and created the deficiency again and run MD03 again with a message that mrp done but this time when I went back and checked MD04, there is no Preqs shown and deficiency remained same as was before. I did the same exercise on several material and every time I am having the same problem as the 2nd time the Preqs don't show in MD04. Please help me as I check upto my knowledge but unable to resolve this one.

what is the control parameter of the MRP run that you select.

Iplanet 5.2 strange quota problem

Similar Messages

Maybe you are looking for