Ipod nano 4th Gen. doesn't charge on AUDI A3 2009 standar car interface

Hi,
I'm quite dissappointed with both, my ipod and Audi's interface... i don't know whom to blame, but more likely i think that this might be a firmware issue of my ipod.
The ipod connects just fine to the car but it won't charge while playing... Can some one guide me on the reasons of this, is Audi's fault? (the manual of audi says that ipod will begin to charge inmediatly after connected)... without charging the whole purpose why i bought the ipod is meaneng less?
I'm also interested in a workaround in order to charge ipod in the car, but maybe the charging adapters won't work either..
thanks for the help

Hi,
I have the same issue but with 2009 Mercedes AND my new iPod Nano does not charge either when I put it in the Bose speaker system at my house. Had no issues with my older iPod Nano (worked in the car and with the Bose). This is very frustrating because like the first writer commented; the whole reason for having an IPod in your car is lost if it does not charge. So is my only option really to buy separate additional chargers for my car and the home Bose system? Nice... would have kept my old iPod if I would have known this
Thank you so much if someone can help!!

Similar Messages

  • My iPod touch 4th gen doesn't charge.

    My iPod touch 4th gen doesn't charge. Sometimes it will charge fine but then other times it will say "charging is not supported with this accessory"

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • HT1320 my ipod nano 4rd gen doesn't syn all the music fron Itunes library?? very frustation

    My Ipod Nano 4th Gen. doesn't synch all the music from my Itunes Library??

    Make sure all the songs in i-tunes are checked off (small box to the left of each song in the songs list), and click sync, or apply.

  • FM transmiter that CHARGES iPod nano 4th gen

    Hello.Well after the clickwheel crapped out on my girlfriends ipod nano 4gb 1st gen decided to get her a ipod nano 16gb 4th gen (pink..shes a girl:) for her birthday.So that's all decided.Now I start researching what fm transmitter to get and see a problem that many folks have...the fm transmitter DOES NOT charge the ipod. I come to you guys for suggestions.I did look at some like griffins' itrip line and while it said it is compatible i have seen reviews that said it does kick out an fm signal and does work in that respect BUT does not charge the unit which would suck.Please tell me what models you guys are using and if they are working for you.Any help would be appreciated.

    Thank you for the reply. I sent an email to griffin and in the reply they stated that all the products that say they work with ipod nano 4th gen....will work with that version. I just get a feeling like I am going to be returning it to the store after buying it.I have no worries about it actually transmitting an fm signal but charging..thats another story. Will update when I find out.

  • Does Ipod Nano 4th Gen charge in the  iHome iP9?

    I know it says all ipod nanos first off, but I have seen many reports where older or even some newer accessories will not charge the new ipod nano 4th gen. If someone could please confirm or deny it does charge it.
    Thanks for your time.
    Message was edited by: soccersweeper225

    http://www.ihomeaudio.com/products.asp?productid=10308&deptid=1006
    Mouse over the 4th gen Nano at the end, so it will charge it, along with the iPhone 3G and 2nd Generation Touch.

  • Ipod Nano 4th Gen not recognised in Windows Vista, Windows 7 or Itunes and screen blank

    Hello,
    I have a quite old (3-4 years old) iPod Nano 4th Gen.
    The screen is blank, which means it needs charging. When I plug it into my laptop/computer then it doesn't show up which im assuming is because it needs charging.
    When I plug it into my plug charger (plugged into a wall) nothing happens.
    I think this is because the cables (I have 3- 2 computer USB cables and one plug charger cable) being too lose and not connecting to the iPhone fully.
    I have looked at all the articles, I have done the R's, I have tried to restore it, I have pressed the clickwheel and centre button together and I have toggled the hold switch.
    If anyone can help it would be appreciated! (And please save the "take it to apple support" etc... comments for if you can't think of anything else- not being rude but I know this)
    Thanks
    BitMyApple

    Hey, I hear ya and can sympathize. I have the same
    issue. The difference is that my computer can "see"
    my ipod but it refuses to show up in itunes itself;
    therefore, I can't put anything on the ipod (from the
    computer) and vice-versa. Apple support is clueless.
    This is very frustrating to say the least. Itunes
    keeps telling me that my ipod is synced to a
    "different" computer, which isn't true. It's the
    same computer. The difference is that when I first
    got the 'pod and used it with this computer (and
    everything worked fine), I was running XP. I
    installed Vista and after that, all the problems
    started. If I ever get this resolved, believe me,
    I'll post something here.
    I'm guessing that somehow, itunes "sees" what
    computer it's hooked to by "looking" at something in
    the OS. Change the OS and it "thinks" it's seeing a
    "different" computer.
    Try reformatting it.

  • Itunes won't recognize my ipod nano 4th gen (or any other ipod) as a device

    i've had my ipod nano 4th gen for as long as 4th gen's have been around.  never had a problem with it or itunes.  until now.  all of a sudden, when i plug my ipod in to sync the new music purchased, itunes doesn't even recognize my ipod.  "devices" never even comes up.  "sync ipod" under file isn't highlighted.  my ipod only shows as charging.  since this problem occurred, i've tried my husband's ipod and it isn't recognized.  i've used numerous cords in both USB ports.  i've uninstalled and reinstalled itunes.  nothing is working!  any suggestions would be greatly appreciated!!!!

    Here'sa link that might help
    p://support.apple.com/kb/TS1363

  • HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

      I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • IPod touch 4th gen that wont charge or show up in itunes.

    I have an iPod touch 4th gen. that wont charge. When I plug it in, it shows the battery with a little red at the one end and a lighting bolt ( the usual screen when charing the itouch after it is completely dead). I have left it in pluged in for a few hours but it never actually charges. Also when I plug it into my computer Itune won't recongnize it. The cords work fine I tested them with my other Ipods and everything worked liked normal. I have tried to restart it by holding the power and home button together but that doesn't seem to help either (again probably because it is dead). Thanks for the help.

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      
    Also
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPod nano 4th gen stuck in dfu mode.

    I have a problem with my son's iPod Nano 4th Gen.
    When I try to restore the iPod in iTunes it gives the error 1601 and says it doesn't recognise the iPod.
    When connected to my laptop without iTunes it says 'usb DFU device'.
    I have tried every combination of buttons, before anyone tells me to 'just hold in menu and select'.
    I can't get the iPod out of DFU mode to restore. Any help is much appreciated.

    Bump

  • Lifespan of Ipod Nano 4th gen ?

    Hi.
    I have two ipod nano, 4th gen, about 18 months now. both have experienced a series of minor problems, requiring resets etc along the now.
    Now one is completely dead, will not start. I brought it to the Apple Store Expert who says it is dead, not repairable.
    So my question is...
    How long are they expected to last, under normal usage conditions ?
    Obviously excessive use, water exposure etc doesn't count.
    Cheers,
    Colin.

    Hello colinregan,
    And welcome to Apple Discussions!
    It really depends on what you define as normal usage condition. There really isn't an exact number, but instead a range of values that could answer this question. Personally, my iPods have lasted anywhere from 2 - 5 years, sometimes more.
    Maybe check out this article for more information on the subject.
    http://www.neowin.net/news/ipod-life-estimated-at-four-years
    B-rock

  • IPod Nano 4th Gen - Stuck on Apple logo

    After not using my iPod Nano (4th Gen. 4GB) for about 4 months, I try to turn it on to find it isn't responding. I figured it was completely dead, so I plug it into my computer to see an Apple logo appear on the screen, and I leave it to charge for about an hour. After charging, my computer still didn't register any usb device. When I disconnected it was stuck on the apple logo. After waiting for a while it was still on Apple logo.
    So, I did some reading and put it into disk mode. Once in disk mode it was recognized by my computer, and I promptly restored it. After it was restored I reset the iPod. But, again it was still stuck at the Apple logo screen.
    I have repeated this process three times, and each time I reset it after restoring in disk mode, the iPod is stuck at the Apple logo screen.
    Any ideas as to why it is doing this?

    his is not operating system-specific, but I want to get it on the record somewhere since I could not find the solution anywhere else.
    Last week, my third-generation 30GB iPod refused to go beyond the Apple logo on startup. It would power up, flash as if trying to go to the menu, but instead it would just show the Apple again. I tried all the usual recovery methods: resetting (hundreds of times and a couple of different ways), disk scans from the diagnostic menu, restoring with the latest iPod software and with an older version, fsck, using Disk Utility to repair and erase, Disk Warrior, letting the battery drain, everything.
    Nothing worked ... until I used Disk Utility to reformat the disk with the "Zero Out Data" option (in the Security pop-up) enabled. This, apparently, reformatted the drive in such a way as to account for bad sectors. It took about an hour.
    After that, I restored it with the latest iPod software, and to my delight, it booted normally. It now works fine.
    Found that on web mite help you.... but i dont have a mac

  • IPod nano (4th gen) not recognized by iTunes 11.1.3

    I have an iPod nano (4th gen). After upgarding iTunes to v 11.1.3 (MacBook Pro) I get the follwoing message:
    iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.
    Unfortunately, I restored to factory settings, which erased everything, but each time I connect the iPod I get the same message.
    It must be an issue with compatibility because I get the same message with my wife's iPod (same gen), but hers syncs just fine on her iTunes (v 10), and I get the same message using two different USB cables.
    So now my iPod is essentially empty (factory settings) and as good as a paperweight unless there is a way to get iTunes to recognize and sync. If I could get past the error message, I suspect it would be easy to sync automatically or manually.
    Any help would be appreciated.
    Thanks

    Hi JMfromMN,
    Thanks for using Apple Support Communities.  If your iPod isn't recognized by your computer, this article may help:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Since your wife's iPod displays the same behavior omn your computer, it sounds like the troubleshooting for the iPod itself (which you've largely already done anyway) can be skipped.
    Cheers,
    - Ari

  • Using a Windows formatted iPod Nano (4th Gen) with Bootcamp on a Mac(Win XP

    Hey I was wondering if anyone knows if you can use a previously formatted iPod Nano (4th Gen) with a Mac that has XP Bootcamped on to it. If the Nano is placed in manually manage music with the original computer it was formatted with, will it be able to accept music, movies, podcasts, etc from the windows on the Mac or will they still be incompatible?

    Well, I have 4 internal drive bays filled already, is there room somewhere for 5th one in the box? I wasn't aware of it if there is?? My mac is MacPro3,1, early 2008.
    That macsales.com link is interesting but I'm not in the US (I'm in Croatia), and all those brands are supidly expensive here, that $80 esata docking station is almost $200 here... bahh. For that price I may as well buy a whole new 3TB external disk, I want to dock the old one to save money.
    I've browsed around and I've found Icy Box docks, which have much more reasonable prices:
    BOX IB-110StUS2-B
    ICY BOX IB-111StUS2-Wh
    ICY BOX IB-115StUS2HC
    They all claim to have OSX support... anyone have any experience with them?

  • IPod nano 4th gen - Apple Mobile Device Driver issue

    I have an iPod Touch that connects and syncs perfectly with iTunes but I can't find any way of doing the same with my wife's iPod Nano(4th gen).
    Whenever I connect the nano it appears under Universal Serial Bus Controllers as Apple Mobile Device USB Driver but with the dreaded Yellow Exclamation mark.
    I've tried:
    The 5Rs
    Different cables
    Different ports
    Disabling drivers
    Uninstalling drivers
    Removing all Apple software (in the correct order) and reinstalling
    The only error message I get, other than the Exclamation Mark, is when I check the Driver Properties, it shows "This device cannot start. (Code 10)".
    If I click on Properties, Driver and Update Driver, Install from specific location I see:
    Apple iPod USB Driver Version 6.0.9999.40 (12/11/2008) and
    Apple iPod USB Driver Version 6.0.9999.61 (11/05/2012) and
    USB Mass Storage Device
    Does anyone have any other suggestions as to what I can try?

    The code 10 might be caused by old driver componentry "stuck" in the bowels of your OS. If that's what is going on, we might be able to get past this ... but I'm afraid it's a bit of a performance.
    First, go into "My Computer". Go "Tools > Folder Options". Go to the view tab.
    Make sure "Show hidden files and folders" is selected.
    Make sure "Hide extensions for known filetypes" is unchecked.
    Make sure "Hide protected operating system files (Recommended)" is unchecked.
    Click OK.
    Now in "My Computer", open "Local Disk C:" or whichever drive your Operating System is installed on.
    Open the "Windows" folder.
    Open the "system32" folder.
    Open the "DRVSTORE" folder.
    In there look to see if you have either of the following two folders:
    netaapl_(LongStringOfNumbers)
    usbaapl_(LongStringOfNumbers)
    If you find either of them, drag them out onto the desktop. (Don't touch any other files or folders you see in there.)
    Now go back into the "system32" directory.
    Open the "Drivers" directory.
    Look for either of the following two files:
    netaapl.sys
    usbaapl.sys
    If you see either of them in there, drag them out onto the desktop. (Again, don't touch any other files or folders you see in there.)
    Now restart the PC. Try a complete uninstall/reinstall of itunes and related components as per the following document:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    ... and then try connecting the nano again. Any better luck this time?

Maybe you are looking for

  • How to call a custom transaction in retailstore which runs in same session?

    Hey guys, hope you can give me some hints. OK, i have a resultlist and it should be possible to call a SAPGui transaction via webgui service. This works fine but the link which i created has no info about the current session ID. I build an URL with t

  • Pages tear when scrolling

    I have been having odd things happen when scolling, only starting in the last week or so. When I scroll down the page, I get partway down and then the upper part stops scrolling and the lower part scrolls under it. The opposite thing happens if I scr

  • Using zoom in flash player

    Win 7 64, IE 10 , Flash 11.6.602.180 In IE if a web site opens in a new window and uses flash player there is no zoom available. Right click has no zoom options. Also windows zoom using ctrl+mouse wheel only zooms the rest of the page and the image s

  • Create new album with new versions of selected images

    Is there an easy way to create a new album containing new versions of the currently selected images? Some explanation where I need that feature: First I go through the images and adjust them for the some purpose. Then I need the same images in anothe

  • My mac is becoming very slow

    why is my mac running very slow lately, it takes a couple of seconds for a window to open