IronPort Email get message size statistic for some period

How can I get SUM of message size for incoming and outgoing messages.
Something like:
Message   Category
Messages
Message Size
Stopped by   Reputation Filtering
21,7%
100
Stopped as   Invalid Recipients
17,4%
80
Spam Detected
10,9%
50
Virus Detected
4,3%
20
Stopped by   Content Filter
2,2%
10
Total Threat   Messages:
56,5%
260
Clean Messages
43,5%
200
Total   Attempted Messages:
460

Hi Juraj,
the message size for the "Monitor - Overview" reporting page is not included. Only on the "Monitor - Incoming Mail" you will find the total message size per domain. Maybe you find something here, e.g. spamtowho which might be of help:
BR
Enrico

Similar Messages

TS3899 How to fix Sent emails getting stuck in Outbox for a period of time before being sent?

How do you fix Sent emails getting s tuck in Outbox for a period of time before they actually send?
The error message says that my "sender address is rejected by the server", but it eventually does send.

Have you tried a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!

HT1277 I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

Do you have one, two or more entries in the left colum of Mail.app for your mail server(s)? That is, do you have your Mail.app set up with either a btinternet entry, with a btyahoo entry, or both? Or more?
I'm guessing that you might have one account (btyahoo?) listed for incoming (IMAP server) mail, and with the outbound (SMTP server) mail is configured and named btinternet.
Based on what little I see posted, it looks like BT uses both btinternet and btyahoo, but I'm not exactly clear on how they have their stuff set up, and their web set gets helpful and tries to help configure my mail — I don't immediately see a single web page with the mail server set-up details. The BT email client set-up starts here.

I have a new email and am trying to change it in icloud. but it has locked me out and won't send my email a reset password link for some reason. even though it says its sent, it doesnt come to the email address

i have a new email so have a new apple ID now and am trying to change it in icloud. but it has locked me out and won't send my email a reset password link for some reason. even though it says its sent, it doesnt come to the email address. help!

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18

Cannot attach files to email. get message "An internal error occurred when attempting to attach... " when do retry and "switch" can attach the file. What is the problem? Files attach ok with IE.

Cannot attach files to email. get message "An internal error occurred when attempting to attach... " Have tried attaching docs and jpg. Same result , files don't attach. When click on try again and then "switch" the file does attach.

Cannot attach files to email. get message "An internal error occurred when attempting to attach... " Have tried attaching docs and jpg. Same result , files don't attach. When click on try again and then "switch" the file does attach.

I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?

I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

Uninstalled Itunes and now I get message 'Thank you for downloading Itunes' when I try to install. But the program doesn't install. Any ideas?

Uninstalled Itunes and now I get message 'Thank you for downloading Itunes' when I try to install. But the program doesn't install. Any ideas?

See the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2

Increasing Email Size Limits for some users

Hi All,
For some users (management) i needed to arrange that they are able to send bigger files then the default 10MB limit to each other.
I used this procedure to do so,
https://www.simple-talk.com/sysadmin/exchange/increasing-email-size-limits-for-your-high-profile-users-in-exchange-2010/
In a nutshell:
Set Global Transport Org. Config to 200MB
Set Transport Send and Receive connector to 200MB
Created a Distribution group adding the MT members and me (for testing)
Created a transport Rule for the 10MB limit for all users and exception for the distribution group
(Believe me, i am not happy with the 200MB size limit)
All seems to work but i have one issue that i cannot tackel or maybe it is by design.
-Managemant can also send big files to all
users who do not have this privelige, this is not someting i want, sending 100MB+ attachments to over 150 users.
Is this by design or do i mis something?
Thanks,
Ron

Hi RonGielgens,
Attachment size in exchange has to be set on
Global settings
Connectors (send and receive connectors)
Mailbox
The global settings will affect all the others. of course connectors will affect specific servers and mailbox one user. You have to set the global to the absolute max size you want to allow in your organization.
after you do this you will need either to set the 10MB on each mailbox
Get-Mailbox | Set-Mailbox -MaxSendSize 10MB -MaxReceiveSize 10MB
Then change the limit on specific mailbox
or another way is to create a transport rule that will reject the email if the attachment size it > 10MB unless the sender/recipient is the required user or group.
so basically create 2 transport rules
1. reject messages sent to anyone with attachment > 10mb unless the recipient is userX
2. reject messages sent from anyone with attachment > 10mb unless the sender is userX
Normal case it should not allow.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Error when upgrading to 10.5 on Windows7. Message is HKEY_LOCAL_MACHINE32\Software\Classes\.m4b\OpenWithList\itunes.exe. Verify that you have sufficent access to that key. I am an administrator but cannot get to that key for some reason.

I tried creating a new user account and installing and it would not work either. I tried the uninstall recommendation from Apple and that did not work. I am running out of ideas. I even had my IT look at it and they said Apple sometimes locks down their registries for some reason.

This isn't really my thing but no one else has replied.
A few thoughts, if this is an upgrade, are you using the same account to do the upgrade as you used for the original install? If now it might be worth trying the other account.
Although you account has admin status, it might be worth logging in as THE adminstrator, if you haven't done that.
Although you don't have HKEYLOCALMACHINE\Software\.aif\OpenWithProgIds, you didn't say if you have HKEYLOCALMACHINE\Software\.aif - if you do it might be worth checking permission there.
If this is an iTunes 7.5 upgrade problem - you didn't say - it might be worth gettting the details to royb - see this post:
http://discussions.apple.com/thread.jspa?messageID=5766448&#5766448

SOAP message size limitation for sender soap adapter

Hi All,
We are facing critical production issue in case of sender SOAP Adapter,
If the sender soap message is having 114359 Bytes than the Third party is getting exception and SOAP request is not reaching XI.
If the message size is less then 100kbytes then no exception will come.
Is this a limitation that SOAP message size should not exceed 100kbyte?
Thnaks in advance
Best Regards,
Harleen Kaur Chadha

Hi ,
Thanks for your inputs,Could you please tell me which hardware configurations are you talking about?
Are you people talking about harware configurations for XI?
Best Regards,
Harleen Kaur Chadha

Folder size showing for some, not all folders

I am Mountain Lion 10.8.5.
This is a common problem, but couldn't find any answers specific to Mountain Lion or my exact problem.
I wanted to see folder sizes in Finder, which is turned off by default. I went into "Show View Options" and then checked "Calculate All Sizes". I then click on "Use as Defaults" button, which goes from black to gray when I click it.
I would assume "Use As Defaults" would apply for the entire hard drive. But it seems to be applied randomly. Some folders have sizes, some don't. Sometimes folders will not have the size shown but subfolders will.
Any ideas?

Thanks to everyone for their replies - I thought that it was just me with this issue but clearly not. Also thank you to Mil_Prep and S2Linda's suggestions, unfortunately all three of my email accounts do not have a "Mail Days To Sync" option - I believe that this option only appears in Mail settings if the account is an exchange email account. Even if I was able to adjust the time period of emails to sync, I don't think that it would help because the email(s) that are going missing can be as recent as one day old, leaving all my earlier emails in the same folder intact - some of which can go back to the year 2002 for instance. I am still convinced that it is a bug with headers in iOS5. Last week I even had a related problem where I had a new email merge with an old email. The senders email address, subject title and date remained the same but the body of the text was replaced with an old email from 2006! Very odd....

755p treo...phone's email "gets" messages from two years ago...super old mail...how can I get my newer messages?

I've got a Treo 755p...and I'm happy with it, except email has never worked right. When I connect to my gmail account to "get" messages, all it downloads are 350 messages from the year 2008. I've got to keep downloading, and deleteing 350 messages at a time which are two years old. What can I do with the phone or at gmail to "get" the more recent mail. It seems there must be a way to eliminate these old messages and concentrate on newer messages.
Thanks for the help, I appreciate it and do enjoy the phone. I've got a wireless keyboard coming and that seems like an awesome accessory. Thanks again!!
Post relates to: Treo 755p (Sprint)

I feel your pain. I awoke this morning to check my text messages on my iPhone (I'm away working in Norway) only to notice a text my girlfriend sent over the night. The title bar over the message listed her Italian mobile number instead of her name. I thought that odd, only to realize that virtually all of my contacts have disappeared from the iCloud. Even more strange, there appears to be no order, rhyme nor reason, or any form of sense as to what has been deleted. If this (and a few other issues I have with post-Jobs Apple) is indicative of Apple's trajectory, they're not going to be around long. I'm beyond ******-off over this and I'll be thinking very hard about buying Apple products in the future.

Setting up work exchange email, getting message cannot get mail, cannot connect to server. Why

Setting up email on exchange, and getting message cannot get email, cannot connect to server. Why, my other email on the exchange is working with no issues

Hello Retski,
The article linked below provides some useful information and troubleshooting steps that can help get the affected Exchange account working.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Cheers,
Allen

My messaging went offline for some reason on my imac

my messaging went off line on my iMac for some reason and though I shut down the computer and restarted it still doesn't work. How do I get it back? messaging works on my iPhone and ipad

Hello bignate455,
It sounds like restrictions may be enabled preventing in app purchases.
You can enable and adjust Restrictions, or Parental Controls, on your device to prevent access to specific features or content on the device. Locate these settings by tapping Settings > General > Restrictions.
You can choose to prevent access to specific content types:
Ratings (select the country in the ratings section to automatically apply the appropriate content ratings for that region)
Music and podcasts
Movies
TV shows
Books3
Apps
In-app purchases
You can also adjust the time necessary before a password is required to purchase content.
From: iOS: Understanding Restrictions (Parental Controls)
http://support.apple.com/kb/ht4213
Regards,
Sterling

Mail Hangs Up at "Getting Messages" and "Searching for Sender's Image"

When I open mail and view a message, the Activity Viewer window continues to show the "Getting message '<name of message>'" activity next to a frozen striped bar. If I click on another message to view it, I get another activity line in the window "Getting message <etc.>," but this time with a moving striped bar. Below that there's a "Searching for sender's image" activity line and moving striped bar. This is accompanied by a spinning cog next to "loading message" in the Mail viewer window. At this point Mail is stuck. This is a brand new problem as of this morning. I've used mail successfully for quite a while now. Does this sound like an issue with the program, with my mail provider, with a particular email, or something else? Also, I can access email as normal through my ISP's webmail portal.

The console.log displays a list of errors such as the following:
Aug 22 09:07:09 mdimportserver[240]: -[FileProcessor importMetadataFromFileAtPath:] Got exception * -[NSCFString objectAtIndex:]: selector not recognized [self = 0x38c8d0] for path '/Users/Will/Library/Mail/POP-{my email address}/INBOX.mbox/Messages/90942.emlx'
It seems to be processing each message in my inbox in order starting from about 3pm yesterday. I assume that it was doing the same when I first posted yesterday morning.
I have run disk utility and find nothing wrong with my system or hard drive.
Thanks.

IronPort Email get message size statistic for some period

Similar Messages

Maybe you are looking for