Is anyone actually running Cisco IDSMC/VMS on Solaris?

I am wondering if there are any other folks out there actually managing/monitoring their Cisco IDS environment (IDSMC/VMS) under Solaris? If so, how many sensors do you have?
Anyone? Anyone?
Thanks,
-WP!

I think up to 25 sensors can be monitored by a Solaris server. It however depends on the amount of traffic and alarms. To be on the safer side you could have 5 sensors report to a device. Haven't tried it myself.

Similar Messages

  • Is anyone ACTUALLY using/running CS3 on Macintosh Tiger OS & creating cont?

    Huge dilemma on my current work flow . . .
    Is anyone actually running CS# on the tiger OS?
    Is it stable, working ok - or several problems?
    Deeply appreciate actual user replies.
    Thank you for any insight you may offer.
    Luke

    Yes, No, Yes... depends...
    My QS/2001 running Tiger 10.4.11 still can use Classic, or even boot into OS9 if need be, runs CS3 Pro too, though I prefer 10.3.9, which doesn't do CS3.
    My MDD/FW800 doesn't boot OS9, but uses Classic, and or CS3.
    I think any G4 can do both Tiger/CS3 and/or Classic at the same time!
    What exact G4 do you have?
    But also JUST as important - can you successfully run CS3 on it.
    That is, has or is anyone actually creating content with it - on Tiger OS.
    Iv'e done some piddly stuff, not with Flash... which I don't get at all, but all the other ones.
    If you tell how to create content in Flash I'll reinstall it and give it a whirl!
    PS. Leopard is a joke we'll all get one day and we'll fall over laughing!:-(

  • Does anyone actually use automatic panning?

    I've tried the automatic panning feature, and I don't understand how it could ever be useful. For example, using Captivate 5.5 for Mac, I'd like to set a recording area smaller than the application window and have the recording area move with the mouse, but I'd like the recording area to stay withing the application window borders. The results are jerky, unpredictable pans and the recording area invariably roams beyond the application window borders, showing undesired screen elements (other apps, Mac menu bar, etc.,) despite my specifying "Application" for my recording settings. I've had to resort to manual panning--which is very difficult to use smoothly; I had to create a "single axis movement" key command on my trackball mouse to help control horizontal/vertical movement, but even that isn't 100% reliable to ensure smoothness.
    Am I missing something, or is it simply not possible to control automatic panning in the manner that I'd like? (I've read that Camtasia does this flawlessly, but I've never used it. And I am not certain whether it could be used for eLearning, not to mention it's video based, thus large files.)
    I'm having a hard time understanding how this feature could be useful, unless you don't mind very jerky pans and your application is full screen and running on Windows (no OS menu bar to distract the user, although I suppose the bottom task bar could get in the way but at least that could be hidden).
    Has anyone actually used automatic panning for a project, and were you pleased with the results?

    Hi there
    Until Captivate 6, I've long advised folks that if "panning is your thing", skip Captivate and go look at Camtasia.
    That being said, it's worth noting that while Camtasia and Captivate both capture what goes on with your screen, they take two different approaches.
    With Camtasia, you pretty much record the full screen at the start, then later determine the size you want to produce at. Since you are already full screen and you later determine where the pan goes, it's much better and silky smooth in operation.
    As you have seen, with Captivate you get, ummm, how do I say this nicely? Ummm, "less than desirable" pans. So if you are on Captivate 5.5 or earlier, fuhgeddaboudit when it comes to panning.
    But I'm aware that Adobe has put lots of effort into Captivate's full motion recording engine. Whether it will now rival Camtasia's remains to be seen. But it's greatly improved in version 6 of Captivate. You did mention Mac. I'm not a Machead and tend to avoid them for value considerations, so I'm ill equipped to say whether Adobe updated the Mac version along with the Windows version for 6. I know TechSmith has different release cycles as well as different feature sets for Mac VS Windows on Camtasia. Perhaps Adobe is better in this respect.
    So you might try version 6. Download it, kick the tires and see if upgrading is worth it for you.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • EBuyNow - has anyone actually received anything fr...

    Hi everyone,
    In early October I purchased the Freetalk camera for a Sharp Aquos TV from ebuynow. At this point they were showing out of stock with an expected delivery date of October 13th. October 13th my EBuynow account said "At warehouse - Will ship shortly".
    On October 17th asking what was happening - at which point I was told the cameras will only be in stock on November 5th (so why did it say at warehouse?) and received $2 skype credit as a gift. I was a bit annoyed, but could cope with another 2 weeks wait.
    November 1st, I receive an email saying these devices will only be in stock on November 20th. On the 20th, I tried to logging into my account to see what was happening, only for their system to say it didn't recognise my account. Even trying to reset my password returned an "account not found" message.
    As a result, I emailed them asking what xxx xxxx was going on (I've been waiting a month for this camera and keep getting dicked around) only for them to reply stock is now arriving on December 5th. Went on their website to confirm and their website says stock arriving on December 6th - so I have a feeling I'm going to get screwed over on this again.
    Has anyone actually received anything from ebuynow? Or should I just ring my credit card company and get them to reverse the charges? For me it seems the only thing this "global logistics company" does well is take your money.

    Hello,
    We have asked eBuyNow to investigate your order status.
    Normally this supplier performs well and resolves customer queries promptly.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Trying to import drivers, anyone ever run across FOLDERS that are named with a .INF?

    I am using the excellent driver import script from http://blog.coretech.dk/kea/automate-importing-and-creating-drivers-packages-in-sccm-2012-r2/ to try and import drivers from Dell and HP.
    We got these drivers from the Dell driver CAB website, same with HP.
    We've extracted these drivers and are now attempting to import them.  For the most part this works well, but there are some drivers that have a FOLDER in their path that has .INF in the FOLDER name. The script (I think) is seeing that folder name and
    treating it as a driver .INF file, and failing to import it. An example is below.
    These folders do have drivers in them, but the script is stopping before going any deeper, since it thinks these folders are actually driver files. Has anyone else run across this? I imagine you have if you're using the Dell and HP CAB files, which I suspect
    many people are. Is there any reason these folders are named like this? Can I remove the .INF from the folder names and re-run the script? Will this cause any problems down the road?

    It is kinda silly of the vendors to extract to folders in this way. You would never manually create a folder structure like that.
    However, you are lucky to have the CAB file in the first place. More and more I am finding that there are no CAB files to download for certain models - I have to end up making my own driver package by importing individual drivers. It's a real pain.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Unable to run Cisco IP Communicator

    I am trying to run Cisco IP communicator while connected to my Wifi network at home (Verizon Fios) but something in the router is blocking it. I am successfully able to run it using Wifi on other Internet services(UVerse, TimeWarner).  Could you please let me know :
    - how do we configure firewall/access rules in Wifi or disable all the firewall/access rules for testing ?
    - how to configure router to run this application ?

    Perhaps you need to forward the ports that it uses?
    I point to http://www.portforward.com/english/routers/port_forwarding/Westell/A90-750015-07/A90-750015-07index....
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Does anyone actually answer the support Chat?

    I'm unable to run Photoshop CC. I've been holding for chat support for almost 30 minutes. It keeps saying, "We are still assisting other customers, thank you for your patience. You can also try ourcommunity forums, available 24 hours a day, 7 days a week."
    Does anyone actually answer it? How long is the wait? It's pretty frustrating.

    I was on hold for over 3 hours before I finally got a hold of someone.
    Then it took an hour to figure out my issue. I had to log completely out and then log into the Creative Cloud app in my system try before logging into the application. Apparently if you do them in the reserve order, it tell you your internet connection is bad.
    So, 4 hours to resolve my issue.

  • Has anyone else run across Error 213.23 or cpsid_83578?

    Hi All,
    I have a Master Suite CS5 installation problem on Windows 7 64 bit - Have exhausted first layer of tech service.  The 3 tech service persons do not have a solution for the errors shown below.  Next layer of tech service will call back.  It has been 2 days…
    I can install all programs except for AE, AF, and FL. Although I can install the other programs I cannot open any of the classical programs such as PS, AI, DW, etc.   When I try, I get the following messages:
    “A problem has occurred with the licensing of this product. Restart your computer and re-launch the product. If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen - Error 213.23”
    Ran AdobeSupportAdvisor – the following errors came up “licensing program cpsid_83578 launch and serial # language do not match CS5”.
    Has anyone else run across Error 213.23 or cpsid_83578?
    Thanks,
    Randy

    Hi, Wonder if you found a solution yet??
    I've just purchase PS CS5, and run into the same problem and error message when I install it (Windows 7 /64bit). Tried to install it from the Administrator account and then it works, but when I log on to any other account CS5 is not available/working.
    Any new suggestions are highly appreciated!
    Einar

  • When I plug my iPhone 4s into my PC, I get an error message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. Has anyone else run into this problem recently?

    When I plug my iPhone 4s into my PC, I get a message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. iTunes won't recognize my phone and so I can't synch it. Has anyone else run into this problem recently and how did you resolve it? Thanks!

    Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

  • I would like to put Dreamweaver 8 on a new computer.  There is no "deactivate" function and the technical support person I chatted with recommended I come here.  Can I just use the serial number again?  How can I deactive?  Has anyone else run into this?

      There is no "deactivate" function and the technical support person I chatted with recommended I come here.  Can I just use the serial number again?  How can I deactive?  Has anyone else run into this?  How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer?  Is it even worth doing or do I need to get a new version.  What are the killer features I'm missing?

    If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
    Adobe - Dreamweaver Support Center : Updaters
    Nancy O.

  • Has anyone actually got the Green Screen feature to work?

    Has anyone actually got the Green Screen feature to work? I've been trying for about 8 hours, absolutely no success. I have followed the iMovie Help instructions and the examples on the internet, over and over again. I've tried every imaginable variation on the instructions. Nothing from my green movie shows up. The green in my video is pure green - 100% green, 0% red and 0% blue. Yet the non-green images in the video aren't getting displayed at all. Several other people have mentioned a similar problem on these forums and they are all "unanswered". Is that because this is an unsolvable problem? Is it an iMovie bug? Sigh. I'm a big fan of Apple but stuff like this gives them a bad name.

    After several more hours of diagnosis I have identified some conditions which can make Green Screen slightly work (but not much). The condition is as follows. The green screen clip must be carefully dropped at the beginning of a video clip, such that at least the first two seconds of the green screen clip (no less, but no more or the clip will become attached to the previous clip and then it's broken again) are displayed over the PREVIOUS video clip. But the green screen will not work on the previous clip, only on the second clip. So you will always lose the first two seconds of the green screen video. It took me a lot of experimenting to discover this anomaly.
    Clearly this is a bug, but since not all users on the internet experience this bug, (some online videos shows that Green Screen actually works as advertised) it's most likely related to the video card driver. My video card is an ATI 4870. If you have such a card, there's probably no hope that you can get this feature to work unless Apple fixes the driver or possibly the iMovie application, or you use my tricky workaround.

  • N80 & HOME MEDIA SERVER, HAS ANYONE ACTUALLY GOT I...

    Has anyone actually got their N80 to connect to thier pc's using the Simple server home media server software, if so what firmware have you got on your phone and what access point / wireless router are you using ?.
    My N8- connects to my network just fine and can browse the internet just fine too, and I can also query my N80 using a upnp test program and it shows up just fine using that so it shows the upnp is not getting blocked by anything, but some some reason it just will not show up in the Pc software and when you try to connect to the pc with the N80 all you get is searching for devices..........
    When I quey the phone with the test program I get :
    Description: Multimedia Device
    DeviceType: urn:schemas-upnp-org:device:MediaServer:1
    FriendlyName: N80
    Manufacturer: Nokia
    ManufacturerUrl: http://www.nokia.com/
    ModelName: Nokia N80
    ModelNumber:
    ModelURL: http://www.nseries.com/
    PresentationUrl:
    SerialNumber:
    UDN: uuid:f0086e4c-f219-10e0-ae0f-0016BC7B14C
    UPC:
    So it seems to be working......

    its late and i have not read your post in full (too bad).
    if you've got the server installed (plus UPnP enabled on your router) you should see your phone. if the server can see it you will see a large picture of the N80 there, check the tabs. if you can't do anything with it (like i experienced initially), make sure you got into your actual phones home network sharing settings. i have to share the phones contents each time i use the sever. this finally makes the server see the phones contents as it displays additional tabs once properly connected (i.e. copy to device, copy from device).
    give that a go.

  • Has anyone actually gotten the 2.2 Software Upgrade to work?

    I know there are numerous threads about the 2.2 Software Upgrade and how it's not working.
    Has anyone actually gotten it to work??
    If you have, please reply with what you did to make it work, how long it took you, etc..
    Thanks in advance!

    Thank you, Thank you Henry1---I hit update, unplugged my iPod-touch,and whala!! the update downloaded to my itunes account. I did have to pay when I had first bought it thru itunes- I tried updating, and syncing several times in the past week or two without success. While my ipod was unplugged I also reset my network settings on the ipod under the settings, general, reset menus before I plugged it back in. When I plugged it back in I had to hit update again to download it to the ipod and then sync to get any applications/games to go on to the ipod. Thanks again Henry1--we were racking our brains trying to figure out if we had the "right network settings" on the computer and/or the computer.

  • Has anyone actually received an answer to a question?

    I posted a question two weeks ago, about flash player just going to a black screen when maximized to full screen and NEVER received an reply.  Has anyone actually gotten an answer to any question by this method? 
    To ADOBE:  I'm sure this is a waste of time, since I doubt anyone from Adobe actually reads these things, but I need to vent.  This is the crappiest customer service I have ever experienced.  Instead of actually having someone at your company respond to e-mail questions you put the burden of solving YOUR PROBLEM to your other customers.  This is a disgusting habit and if there is another option out there other than flashplayer, I'm going to find it, use it and start recommending it to everyone I know.  Your company is crap.

    Problem I have is the swatch doesn't come along for the ride.
    Illustrator makes a gradient from color to clear that can go on top of a raster image and print fine on any output device we've ever owned. InDesign has the gradient feather option which is similar but requires for the two major output devices we have us to either create a TIFF or RIP the item through a prepress system (RAMPage Harlequin RIP, GMG Color Proof's Adobe PDF Print Engine) and send a flattened file. Either way it is Flattened Filesville if you are using InDesign, not if you are using Illustrator.
    If you paste just the swatch and not a group you get this:
    It's been a gripe of mine with InDesign for years (I know there is a feature request form) and the only solution I know of is to flatten files. I've had several workflow vendors promise a good solution and all of them boil down to sending the file through Product X and spitting out a normalized (flat as a pancake) file to the output device's RIP and turning all their color management tricks off on the output device. I know I can do this, but I don't want to have to RIP every single job that is a one off single – twenties quantity poster through a RIP the same way I do an offset job. It just makes me feel like the textbook Bob Levine adage of "your printer is stuck in 1995" kind of scenario. We aren't talking hokey cheapo output devices too. I'm talking first birthday over two hundred kilobuck output devices.

  • Illustrator Shape Builder Tool:  After the latest CC update, the tool alters shapes once edited instead of just removing/adding the desired shape.  Anyone else run into this and/or have any fixes?

    I am using a PC and installed the latest update of all the CC programs I use (AI, PS, AE, etc.) and within Illustrator I've noticed the Shape Builder Tool doesn't behave exactly as it did in the past. (And not in a good way.)
    Previous versions allowed me to edit/add/remove shapes from one another without issue (leaving all shape paths as they were before the editing while making the desired alterations), but the newest behavior seems to alter existing paths once shapes are merged/deleted making the tool almost non-usable. 
    Not sure if there's a check box I'm missing or what, but have done some brief research on the problem and haven't found anything helpful.  If anyone has run into this issue and/or knows a way to correct it, I would greatly appreciate it
    Thanks!

    Please show a screenshot before and after.

Maybe you are looking for