Is it possible to create a printer driver for unsupported printer?

I need to print to an IBM Infoprint 40. IBM has drivers for Classic, but not OS X. Can I somehow use the driver information in the classic file and make it into an OS X driver that Tiger can read/use?

This printer is a postscript printer. You only need a .ppd file, not a driver. A .ppd file specifies page sizes, resident fonts, and if applicable, print dialog menu plugins. Unfortunately, OS 9 .ppds are not completely compatible with OS X because of different plugin architectures. It doesn't hurt to try the OS 9 .ppd, but it may not give you the options you expected. Windows .ppds are sometimes less dependent on plugins, and can be used in OS X.
To use a .ppd that isn't "installed," choose model "Other," which gives you a file selector dialog, so you can go choose the .ppd file.
Hope this helps.

Similar Messages

Is it possible to have two USB drives for the IPad? I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive. One of my cameras does not use an SD card. How can I do this?

Is it possible to have two USB drives for the IPad? I want to bring RAW files from my camera through the IPad and out to an external hard drive. One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line. Realted to this, I bought the IPad camera accessory. Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive? Can I put Lightroom or the Nikon photo editing software on the IPad? Right now I carry a PC laptop and external hard drives with me on wildernes trips. Internet and WiFi are not available. Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad). I have Nikon NX software and lightroom on my PC. I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips. Is this possible and how would I do it? I'd appreciate any guidance.

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

Is it possible to create many primary key for a table?

hello sir/mam.
i am selva, i am new to abap,
is it possible to create many primary key for a table?
please guide me.

Hi Selva,
Many Primary Keys = Composite Key.
i.e some set of columns will enable you to identify a unique row from a set of rows in the table.
This can be achieved by checking the primary key check box in se11.
Hope it helps.
Regards,
Maheswaran.B
Message was edited by: Maheswaran B

Creating a recovery drive for a K430 computer

Hello-I have a K430 desktop computer with a1TB HDD,12 GB Memory and Win8 64 bits. I used a !TB Seagate USB Drive for C drive backup and a 2GB Flash drive for Personal Document backup. I created a HDD image backup and a backup of my personal documents using the Lenovo procedure.. I understand that I need either a WIN8 disk or Recovery drive to boot and re-install my image file.
I am having problems creating a Recovery Drive. I formatted the drive to NTFS and verified that the Flash Drive was recognized by my computer. I searched for Recovery Drive.exe and it appeared. However, my flash drive did not appear on the Recovery window and the Next button remained greyed out. I will check and see if I have a recovery partition.Have you developed a fix for this problem? If so, please let me know. Thanks.
Carl W Lesesne

Updating Creating a recovery drive for a K430 Computer
Hello-I obtained a copy of Microsoft's Windows Create a USB recovery drive and discovered that I do not have a recovery partition. After entering recimg/showcurrent in a command prompt, I received a message stating that there is no active custom recovery image.
I attempted to create a recovery partition by entering mkdir C:\RefreshImage and recimg-Create C:\RefreshImage after the Command Prompt. This resulted in the following error message: recimg-createIMage is not recognized as an internal or external command. I have reported this problem to Microsoft also. If you are aware of a fix for this problem, please let me know. Thanks.
Carl W Lesesne

Possible to create a custom renderer for rendering standard component ?

This is in context for creating dynamic Data tables. Is it possible to create a custom Renderer for rendering component (standard) without creating a custom component?
namanc

Let's assume you want to create a custom renderer which will be used to render the error-messages (the h:messages tag). The component-family in this case is: javax.faces.Messages, the renderer-type javax.faces.Messages.
Therefor in your application's faces-config.xml add this renderer-statement (inside a render-kit, obviuosly):
<faces-config>

<render-kit>
    <renderer>
      <component-family>javax.faces.Messages</component-family>
      <renderer-type>javax.faces.Messages</renderer-type>
      <renderer-class>my.very.special.MessagesRenderer</renderer-class>
    </renderer>
</render-kit>

</faces-config>The code for MessagesRenderer is very dependent on your needs, therefor I will not post something here. Basically you need to extend javax.faces.render.Renderer. For help in that camp, surf to the online tutorials or get yourself a book (I learned a lot from Kito Mann's "JSF in Action"). Additionally grab the source for Sun's RI AND Myfaces and dig into that java-code. There is a huge learning potential looking at that source-material.
hth
Alexander

Is it possible to create an inbound delivery for STO in a 2 step process ?

Hi Experts,
Is it possible to create an inbound delivery for STO in general (how do I get a vendor for a Plant. I have already assigned a plant to my vendor in vendor master - additional purchasing data, but it does not seem to work).
In particular if I want to create an inbound delivery in intra-company plant STO scenario, how do i do it?
Let me know in case if that is not possible.
Thanks,
Nitin

Hi Tao,
I did that also, but it did not work.
Finally I had to debug, and found that the for the document type UB (intra-company transfer) i should make the customizing setting which makes the vendor data to be considered. (Table T161).
Anyways, thanks for your help.
Regards,
Nitin

Is it possible to create a customs declaration for the document which is cleraed from customs

Hi Experts,
I want to generate a custom declaration for the declaration which is cleared from customs.
Is there any function module for this requirement.
Please post your suggestions ASAP.
Thanks
Srinivas

hi Srinivas,
It’s not possible to create a new declaration for a declaration that is
already accepted by customs. There could be below 2 possible options
1. U need inbound cancellation messages in the respective activity sequence,
and then u can request customs by mail or phone to send the cancellation
message. Once the cancellation message is received document gets cancelled and
u can create new declaration
2. U need a new optional activity sequence that will have outbound
cancellation message. once u trigger the cancellation message, customs will
reply back with the cancellation confirmation message and u can create a new
declaration
Hope this helps...
Regards,
Santosh

Is it possible to create a tool tip for an individual cell?

Hi,
Is it possible to create a tool tip for an individual cell?
Sun's JTable tutorial shows how to create a tooltip for an individual column:
TableColumnModel tcm = table.getColumnModel();
TableColumn tc = tcm.getColumn(0);
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("This is a tool tip text");
tc.setCellRenderer(renderer);
Thank you.

See reply #2 below:
http://forum.java.sun.com/thread.jsp?forum=57&thread=424429
;o)
V.V.

Is it possible to create a Print Button?

Is it possible to place a print button on an iWeb page so folks when viewing it online can print the entire contents of the page. The page(s)are quite long so one must scroll down to view it in its entirety, but when attenpting to print from the browser, only the first part of the long page will print. Maybe I answered my own question ... does this mean that iWeb pages should not be set longer that normal letter size?
Thanks
John

You can also copy and paste the text into TextEdit and print that to a PDF. Then, create a button that says "print" and hyperlink that to the PDF. That way, anyone wanting a printout would have a nicely formatted document and you can include contact information in the document as well.
Most sites I go to just have "print" go to a plain "black text on white background" version of the same text that the user then uses command-p (control-p on PC's) to actually initiate the print, so that'd work as well.

Create bootable flash drive for Windows 8 in Boot Camp

I am running a Windows 8-based marine navigation program ("Coastal Explorer") in Boot Camp, on MacBook Air. I would like to create a bootable flash drive for emergencies. Should it have Maverick or Windows 8 OS? - or do I partition the key drive for both, with the Windows partition also containing a copy of the navigation software and maps for extra insurance? I guess the first question is, "Is this possible?" Then I would need to find information on how to create such a drive. All advice appreciated.

Windows drivers and Mac drivers have nothing to do with each other. So that's a no on your question.

Photoshop Elements - Is it possible to create product photo collages for fashion blog?

Is it possible to create product photo collages with links to each individual item's website? I am starting a fashion blog and the product photo collages with links will be my primary use for adobe and am trying to figure out which program will be best for me.

For example, do you know what program it would take to embed links like this: WHAT I LOVE RIGHT NOW | Luella & June

Has anyone created a device driver for the DG101 Programmable Delay Generator?

I am wondering if anyone has written a LabVIEW driver for the DG101 Programmable Delay Generator third party device?

I have looked at the instrument driver network and there is nothing listed there. The board comes with the source code for the device as well as a gui to run under windows but I am working on the PXI-8196 embedded controller running a RTOS so the .dll that comes with the board is not compatible. I have been on the phone and email with NI over the last 3-4 weeks trying to figure out how to import the .dll, how to wrap the .dll, and how to create a new .dll. I spoke with someone yesterday and they told me that I would have to write a register level interface driver to work with the board and that it is very difficult for even the most experienced person. They suggested I outsource it but I was just curious, seeing that this board belongs to a very small community of programmable delay generators, that someone may have written a driver that is available.
Thanks,
Tracy L.
Message Edited by Tracy L. on 09-19-2006 11:48 AM

Is it possible to create a Production order for consignment fill-up?

Dear all,
As you know, the consignment fill-up is for delivery the own stock to customer special stock.
But our customer request, they want to create a Prodcuction order for the consignment fill-up.
The design flow is like below:
Consignment fill-up -> MRP -> Production order -> GR the FG to local storage location -> Outbound Delivery to customer special stock
So could any one tell me is it possible?
Because I have tried to change the configuration for it, but always failed.
Tks
David

Hello,
Kindly go through following links:
To consider customer consignment stock while MRp with help of user exit/bad
Re: Excluding Kanban storage location from MRP
To consider customer consignment stock while MRp with help of user exit/bad
Can MRP consider customer consignment quantity ?
PP-MRP Exclude Consignment stock in MRP
customer consignment in MRP?
Consignment Fill Up Error
Thanks & Regards
JP

Is it possible to create a hot folder for batch processing?

I know that it's possible to make a droplet for preflight, but is it possible to create a droplet or a hot folder for another batch processes (mine crops the pages)? Or at least make a keyboard shortcut? It's so unproductive to go Advanced>Document Processing>Batch Processing>Run>Close (Adobe spoiled us with custom shortcuts in other programs)...

HenrikAppleJespersen wrote:
is it possible to create a hot spot with apple Airport express 2 generation and use it i a hotel with ethernet wall socket and use it with my Ipad 2?
Yes, it is one of the things AirPort Express was specifically designed for.

How to create a bootable drive for 10.5.8 Leopard?

I wonder if I can use the DVDs following the machine with the Old system of Leopard in order to create a boot drive when my system now is updated to 10.5.8?
Not sure where those recovery disks / system disks are.
Can I createa a boot disc or drive for 10.5.8 without the installation disks?
Or can I create a boot disc from the existing system files on my mac?

Simen Myrberget wrote:
Ok. Just to be sure, my Macintosh Hd now contains 180GB of data and the total size is 240GB. So Superduper will "understand" based on my settings? that Superduper is only suppose to make a boot of the system and utilites not the entire 180 GB of information?
No, I'm afraid not. It will clone everything.
I forgot that you don't have the DVDs. This is how you'd get a system only boot drive.
Simen Myrberget wrote:
I can make this with a partation size on another drive of about 40GB?
If you had a way of getting a fresh install I know from experience that a 20GB partition would work, (maybe smaller).
Best way is get an ext HD of at least 240GB ideally. Clone it, (and boot from it to check it works). Boot back into your regular drive and do the update on that. Is this clone your only backup strategy?

** Is it possible to create new BPM instance for each record (Multiline)

Hi friends,
In my scenario, JDBC adapter (sender) polls the open purchase order items from the table at the specified interval and send to BPM. In BPM, we used transformation step to split the messages to process each PO . The scenario is working fine. The problem is assume that if we process 10 PO, the error is in 4th PO while process, the BPM will be stopped in 4th PO. Once we correct the error, we are able to restart.
In this case, we are not able to skip the 4th PO and process from 5th PO onwards. ie. the processing is sequential. Instead, we want to start new BPM instance for every PO. Advantage is that if 4th PO is error, only that BPM instance (work item) will be stopped. Remaining 9 POs will be completed.
So, how do we start new BPM instance for every PO ?
Kindly tell me, friends.
Thank you.
Kind Regards,
Jeg P.

Hi,
There are two ways to achieve this. In BPM and before BPM.
Before BPM:
Use 1 to unbounded mapping and 1 to unbounded interface mapping.
In your mapping, make sure you create a seperate message for each PO.
In BPM:
Create a multiline container with you POs using a 1 to n mapping.
Now add a ForEach block to loop through the multiline container and send each PO.
Important: Add an exception branch to catch any exception for each send so that the exception does not make the BPM fail.
Regards,
Yaghya

Is it possible to create a printer driver for unsupported printer?

Similar Messages

Maybe you are looking for