Is it possible to debug the selection screen???

Hi Frdz,
Is it possible to debug the selection screen.
eg: if i want to know what is happening in PBO and PAI modules of the selection screen i am not able to debug that.
Even in code if i click on MODULES present in PBO and PAI modules it is saying MODULE doesnot exist!!!!. So i can't put the break point. even if i press /h it will go to Report events like INITIALIZATION, AT SELECTION-SCREEN but not PBO and PAI modules!.
Also what is the meaning of exclamatory mark here(Before select option name)
MODULE !SO_UDATE.
MODULE !SO_UNAME.
Thanks,
Vinod.

Hi Vinod,
Double click on the module and then put the break point for the first statement of it. It will work.
Reward points if useful.
Thanks,
Khan.

Similar Messages

Restrict filter values that are shown in the selection screen

Hi Experts
1) Is it possible to restrict the filter values that are shown in the selection screen in BEx web? When a user are asked to enter a material number and uses the selection button in BEx web, he should only see material numbers for one specific plant. How is this done?
2) Is it possible to remove the selection button for å characteristic filter in the selection screen in BEx web? The selection button I am talking about is the button to the right of where you enter the filter value (two white papers on top of each other). If there is no solution for question 1 we have to go for question 2 solution.
We are using BI 04s, SP 09.
Kind regards
Erik

Hi Erik,
It seems that you would like the user to see value for 1 single plant. If the Plant Value is fixed then you can use this value in the Query and hardcode it.> in the query go to the Plant Chrac and keep a constant value of the Plant.
How ever if you need this value to be dynamic then use a variable for customer exit and populate this value using ABAP.
Regards,
Jasprit

How to Display my Form in the selection screen.(without print format)

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one Z-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.

Hi Prasad,
Pls refer the below link.
<< Moderator message - Point begging removed >>
http://wiki.sdn.sap.com/wiki/display/Snippets/Displayimagesontheselection-screen
Thanks
Arjun
Edited by: Rob Burbank on Aug 17, 2011 2:24 PM

Is there a way to use 'GET PERNR' without the selection screens?

I would like to use the GET PERNR event in a batch program without using the default selection screens. I would like to be able to use my own selection screen and parameters, but only get them along with the default selection options for payroll period. I've tried removing the screen number from the attributes screen, but still get these options. Is this possible?

hi Kiran,
report Category is a Pushbutton on the Attributes popup, it only appears if you use PNP logical DB.
this is from SAPHelp: "Report Category
Category used for HR reports that use the PNP logical database. It controls the type and number of fields that appear on the selection screen of an evaluation report."
hope this helps
ec

How to find out the selection screen values

Hi All,
in BI we are having the maximum allowed cells as 500000 for a report.
for some of the reports execution fetching the data morethan 500000 by different users.
i could findout the report and user who has executed, But i wanted to findout for which selection user has executed.
is it possible to find out...please help.
Thanks,
Krishna.

Hi,,
Yes it is possible.
Open your query result in the design mode by going to BEx Analyzer->Design ToolBar
Now take one text element and assign it to the variable which you have used for the selection screen.
Take the same number of text element as there are in selection screen.
Exit the design mode. In place of the text element you will find the value of the variables assigned to them.

How to get the file name dialog on the selection screen

Hi All
I have a selection screen in which there is a parameter where I need to enter file name. Instead of typing filename in the parameter I would like to give a path from presentation server ( I am downloading Data to presentation server ).
How to achive this functionality in case of a parameter on the selection screen. I need to have File open Dialog box like Windows here and then it should show the filename and it's path in this parameter after selectiong from the dialog box.
Amol

Hi..,
Use the function module F4_FILENAME or WS_FILENAME_GET in the event
AT SELECTION-SCREEN ON VALUE REQUEST FOR P_FILE.
Parameters p_file type rlgrap-filename.
 AT SELECTION-SCREEN ON VALUE REQUEST EVENT
at selection-screen on value-request for p_file.
perform value_request.
*& Form value_request
 This subroutine proposes the possible input values *
There are no interface parameters to be passed to this subroutine. *
form value_request.
call function 'WS_FILENAME_GET'
 importing
 filename = p_file
 exceptions
 inv_winsys = 1
 no_batch = 2
 selection_cancel = 3
 selection_error = 4
 others = 5.
check sy-subrc eq 0.
endform.
Reward all helpful answers !!
sai ramesh

How to limit the search help in the selection screen?

Hi All,
I got a selection option in a selection screen,
say SELECT-OPTIONS KSCHL FOR VAKE-KSCHL.
I want to limit the output list of the search help of this field, e.g. 33 entries for a specific application and usage.
What should I do ?
Thz.

Hi,
U can check with these two
... NO-EXTENSION
Effect
The user can only make an entry on one line. Calling the additional "Multiple Selection" screen is not supported and no pushbutton for this appears on the selection screen.
Addition 12
... NO INTERVALS
Effect
The selection option is displayed on the selection screen without a 'to' field. The pushbutton for calling the "Multiple Selection" screen appears immediately after the 'from' field.
This addition thus allows you to generate a simplified display on the selection screen. This is particularly useful if you are not making any range selections for this selection option.
Notes
On the "Multiple Selection" screen, you can also enter ranges for selection options with "NO INTERVALS".
By combining this addition with "NO-EXTENSION", you can restrict the user to entry of a single value for the selection option, but with the possibility of also choosing single value options like 'Greater than' or 'Less than or equal'.
By using the addition " NO INTERVALS" with SELECTION-SCREEN BEGIN OF BLOCK, you can activate the simplified display for all selection options in a block.
The function module SELECT_OPTIONS_RESTRICT allows you to restrict the set of selection options available for a SELECT-OPTION (for example, only single values and patterns, i.e. 'EQ' and 'CP' are allowed). You can also forbid the leading sign 'E' (= 'Exclude from selection'). This means that you can considerably restrict the selections which can be entered on the selection screen.
Just now tried it out to limit the search help u have to use NO-EXTENSION.
Try this simple code.
Tables: mara.
SELECT-OPTIONS: s_matnr FOR MARA-matnr NO-EXTENSION.
Hope this helps.
Kindly reward points and close the thraed if ur problem got solved.
U havent rewarded any points?
Message was edited by: Judith Jessie Selvi

A field is missing in the selection screen.

Hi,
I could find a field in the default screen of the report(in SE80) however there is no such field on the selection screen when I execute the program. What would be the reason?
Any guesses?
Note:The field is not in hide mode.

>
divyasree kintali wrote:
> Hi,
>
> I could find a field in the default screen of the report(in SE80) however there is no such field on the selection screen when I execute the program. What would be the reason?
> Any guesses?
>
> Note:The field is not in hide mode.
This is simply not possible. The only possiblity must be NO-Display as santosh pointed out.
Or , the screen that you are thinking as default, may not be the default screen.
Or, It may be commented..[:)]...Just kidding..:)
Regards,
Ravi Kanth Talagana

Field in the Selection Screen.

Hello Experts,
I need some info to list all the reports which uses a field in the selection screen.
For example the field SAKNR (G/L Account). If this field used in the 10 reports selection screen, then I need to display all the 10 reports.
Is it possible to get the fields used in the Sel. screen of a report.
Please give some suggestion.
Regards,
Vasanth

Hello Narendra,
Thanks for the reply.
See In a program I declared the field like this:
PARAMETERS: P_SAKNR LIKE EKKN-SAKTO.
So in this case I have to list this report name.
Hope you understand my requirement.
Thanks !!!
Vasanth

How to customize the selection screen of Get Objec

hi all,
I'm developing a program for sap hr.
I use the 'Get objec' to creat the selection screen.
and I wanna limit the date selection.
The defaut display is the 'Period' of radio-button group.
and I want only the single field 'Date' for input insead of a period with starting and ending dates (manuelly we need click on a button to switch to 'Date' input).
How can I switch automatically to the 'date' when I initilize my program?
Thanks a lot for your help
Yimin

Hi,
This is possible through program attributes.
goto attributes, click on 'HR Report category'
now make sure that, 'Master Data (Infotype)' is changed accordingly your requirement.
I think it is helpfull to you.
Regards
Sai

Need to Increase the width of the selection screen

Existing scenario is that the selection screen contains 4 parameters in a row and
it has to be increased to 6.When i try to include the 2 parameters on the same row it
says that the max width is 79.I can try and reduce the width of each parameter but it
still cannot accomodate the 2 new parameters.
Can someone please give me some tips on how to go about it.

Hi Naveen,
SAP has 80 columns max for display on the screen.
if u want to accomadate more than six parameter the reduce the visible length.
example.
SELECTION-SCREEN : BEGIN OF LINE.
PARAMETERS : p_reg1 TYPE char20 VISIBLE LENGTH 12.
PARAMETERS : p_reg2 TYPE char20 VISIBLE LENGTH 12.
PARAMETERS : p_reg3 TYPE char20 VISIBLE LENGTH 12.
PARAMETERS : p_reg4 TYPE char20 VISIBLE LENGTH 12.
PARAMETERS : p_reg5 TYPE char20 VISIBLE LENGTH 12.
PARAMETERS : p_reg6 TYPE char20 VISIBLE LENGTH 12.
SELECTION-SCREEN : END OF LINE.
also see to it that u dont cross the limit of 80 columns
while writting the comments
example
SELECTION-SCREEN : COMMENT 4(10) text-006,
: POSITION 35.
PARAMETERS : p_sumrep RADIOBUTTON GROUP rad1 .
SELECTION-SCREEN : COMMENT 38(10) text-048,
Please Reward Points & Mark Helpful Answers
To mark Helpful Answers ;click radio Button next to the post.
RadioButtons
o Helpful Answer
o Very helpful Answer
o Problem Solved.
Click any of the above button next to the post; as per the anwers
To close the thread; Click Probelm solved Radio Button next to the post , which u feel is best possible answers

How to disable the Selection screens of LDB's ?

Hi,
How to disable the Selection screens of LDB's when we r using the predefined LDB for our executable pgm ? and how to include the predefined LDB can u write the Code for including LDb or if possible give an example of a Pgm using a Predefined LDB?
Thanks & Regards,
Gopi.

Hi Gopi,
Go through the link,
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Regards,
Azaz Ali.

How to make the selection screen field names to apper as in logon language

hai
the selection screen field names should appear
as that of logon language
and before that once i logon with a language
it should pop up the (some)message in the logon language.
For the selection screen filednames to appear as that
of the logon language whether i have to maintain the textelements for all screen fields in all possible languages or i have to write only in english and tell mentioning it to change

In SE38 --> Goto --> Translate.
Choose target language, and start making the translation -;)
Greetings,
Blag.

Adding Container in the selection screen

Hi ,
I have a special requirement, I need to place a
long text editor in the selection screen. can any one explain it. this requirement is in HR report including PNP Logical database.
is it possible to add the Long text container ?
Thanks In Advance.
With Best Regards
Nag

I resloved the issue ..
Thanks
Nags

Possibele entries are not populating for the fields on the selection screen

Hi,
Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
Can any body help me out
Regards,
Amit.

Hi,
In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
After this setting,check whether you are getting the data or not.
Rgds,
Murali

Is it possible to debug the selection screen???

Similar Messages

Maybe you are looking for