Is it possible to declare an interface without any methods?

Hi Guys!
is it possible to declare an interface without any methods?
Thanx
-Sasi

Of course, Serializable interface of Java is an example.

Similar Messages

Is it possible to clone an instance without any data?

Hi,
Is it possible to clone an instance without any data?
Say I want to clone an instance to make a new instance on some other server so that the new clone will be same like a fresh installation without any customization and data in it.
Thanks

EBS with empty database
One option you have is to do another fresh install, apply all of the patches that have been applied on the current instance, then use iSetup to migrate your setups from source to target.
http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
HTH
Srini

Is it possible to use locked iPhone (without any SIM) as a testing device?

Hey guys,
is it possible to use american iPhone (locked on AT&T) as a testing device with xcode for debugging apps?
I won't even insert any SIM in it, just need to know if it's possible, or the device must have signal? (I will activate the iPhone with official ATT sim, but then remove it)
Thanks for your answers,
Dominik

Using an iPhone without a wireless service plan - Apple Support
Pretend it is a touch. No signal so you can't test phone related code, otherwise yes you can use it for testing.

Is it possible to obtain OCA/OCP without any experience i Oracle?

Hi all,
I have little or none experience using Oracle or any other database systems, but my boss at work has generously offered me a chance to take a OAC/OCP certification (Oracle Database). I work as a sysadmin you might say, on a system that relies on Oracle for datastorage. My duties at work do not include any "tampering" with the database, but I sometimes use SQL (Select queries) or Business Objects to obtain data from the database that i cannot reach in other ways.
I have been looking at the courses Oracle Database 10g: Administration Workshop I Release 2 (and Workshop II), and wonder if this is really enough to be qualified for a job as a DBA or equivalent job.
I do not have the need for any of this knowlege of Oracle databases in the current position i have in the company I work for, but perhaps I could, when the time is right, get another job in this company (or somewhere else).
Is it recommended to have worked with databases before taking any of these certifications, and will I be able to fulfill my duties as a DBA with just the two courses I have mentioned above? Are there any other jobs I could do if i take the courses above?
Thanks in advance for any answers
Ola Jordal
Message was edited by:
user575624
Message was edited by:
user575624

Good Morning,
In regards to your question regarding the two courses the answer is absolutely not! In this profession staying up on technology is paramount so that means read, read read! You are presently one step ahead of most others because you got access to a real database where others do not. Take advantage of that but just be careful of the statements you issue. Get really familiar with the data dictionary tables then concentrate on the front end tools. If you know the mechanics you won't be so afraid to push a button when called apon. As for me I never took a course, I just studied the appropriate manuals to pass the test for ocp currently I am 8, 9 and 10g certified. What you can do to accomplish this is get a syllabus of the required areas and check it out on the database. Keep taking the test until you pass, then move onto the next one. Once this momentum builds you will not want to stop. Obviously there will be some things you can't do here. In that case use your home computer, crash it etc. Get to know the procedures cold. Now oracle requires you to take courses to get the cert issued. Back in my days that wasn't required. Consider it an investment in your future. Someday someone out there will want to talk with you because you are currently associated with a business that has an oracle db and that is all that matters. At the interview if you answer their questions professionally and competently, you in all likely hood get the position, regardless of the cert you have or not.
Take the man up on it!
regards,
al

APP without payment Method specified.

Hi Guys,
I want to run the APP and I want the result to be just the payments made to the vendors. Later we are going to take the print out of the payments from the payment run and send it to the bank via a print out of the same.
Is it possible to run F110 without giving any payment method?
I dont want my check lots affected. So i dont want to use method C or any other payment method.
Does SAP just pay the vendors without taking the payment method?Can i run the F110 for just paying the vendors without any method?
Thanks so much in advance..
regards,
Srikanth.

If i am able to understand your question well, you want to make payments to vendors but not issue any check. Instead the bank will make the payment based on the print out from F110.
This can be achieved using payment orders. With payment orders, vendors amount get tagged for payment, and the subledger is updated only when the bank statement reflecting the payment is processed in SAP. Thus payment document will get posted only after the bank has made the payment, and not when you process F110
However you will need to create a seperate payment method for this.
Regds
Pooja

Inbound Service Interface without Input Request Message

Is it possible to create an Inbound Service Interface without Input Request Message? We are trying to create a web service to get all records from a database table hence no input parameter is needed. We have tried in both XI 7.0 and PI 7.1 but couldn't do it. Is this scenario not supported by ESR or am I missing something? Any hint will be appreciated.
Regards,
Jiannan

In the scenario I described in my initial post the table structure is only needed in the response message to receive the data.
For a web service generated from a RFC function module using the service creation wizard (SE80) a table parameter is automatically included in the request message. I can understand this as the wizard can not figure out if the table parameter is needed in the request message or not.
I have tried to use the service creation wizard to generate a web service from the function module RFCPING that has no input or output parameters. As shown in below WSDL segment the WSDL does allow not having any input or output parameters.
- <wsdl:types>
- <xsd:schema attributeFormDefault="qualified" targetNamespace="urn:sap-com:document:sap:soap:functions:mc-style">
- <xsd:element name="Rfcping">
- <xsd:complexType>
<xsd:sequence />
</xsd:complexType>
</xsd:element>
- <xsd:element name="RfcpingResponse">
- <xsd:complexType>
<xsd:sequence />
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="Rfcping">
<wsdl:part name="parameters" element="tns:Rfcping" />
</wsdl:message>
- <wsdl:message name="RfcpingResponse">
<wsdl:part name="parameter" element="tns:RfcpingResponse" />
</wsdl:message>
Thanks,
Jiannan

JDBC - JavaProxy - JDBC (Synchronous) Interface without BPM ?

Hi,
I was reading the following Blog
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/file-rfc-file%28without+bpm%29&
I want to know that, is it possible to develop an interface like below without using BPM :
JDBC - JavaProxy - JDBC
Can we use the same approach as mentioned in above Wiki post for this scenario also.
Regards
Kulwinder

Hello Everyone,
JDBC - JavaProxy - JDBC Sync scenario works using modules similar to File or Jms adapter.
Thanks.

Invoke PI interface without Payload using URL only?

Hi,
Scenario is : HTTP<->XI<-->RFC.
I do not need any payload from source system(HTTP). Is it possible to invoke this interface without payload. Requirement is to invoke this interface using the URL only.
I have tested this interface with HTTP Client. It works only if i supply some dummy xml string in payload.
Please help.

Hi all,
I will be mapping constants only to RFC/BAPI.rqst message(target) in mapping. So, I do not need to map any source fields. In turn, I do not need any payload.
I did not even map root nodes. But I have defined a junk source message which is used in mapping.
Our requirement is to invoke this interface with just URL without sending any payload/xml. Is it possible? No I guess. Please help.
My scenario works only(using http test tool) if I send some dummy payload(string). I want to avoid the payload.
Message was edited by:
mallik kancharla

Synchronous interface without Service Interface and Mapping

Hi all,
Short and simple question: Is it possible to set up a synchronous interface without using Service Interfaces and (Operation and Message) Mapping?
In my case I would like to create an interface with a SOAP and File adapter.
Cheers,
Mac

Hi Mac,
>>Short and simple question: Is it possible to set up a synchronous interface without using Service Interfaces and (Operation and Message) Mapping?
Yes possible provided you have both Sync adapter as sender and receiver. For eg: Soap sender --> PI --> HTTP adapter
>>In my case I would like to create an interface with a SOAP and File adapter.
Sync scenario using File adapter as receiver is not possible. Because File adapter works asynchronously.
Regards
Suraj

Is it possible to create .ncd file without using MAX?

Is it possible to create .ncd file without using MAX? I am trying to read the data given by hundreds of possible Arb. IDs on one of the CAN port without having to create it from the MAX.
Thank you

Hi,
the NI-CAN driver software does not provide functions/VIs to generate
*.ncd files. However the *.ncd file format is just plain XML (ASCII text). Take a
look at the example.ncd file that gets installed with NI-CAN
(<ProgramFiles>\National Instruments\NI-CAN\):
<?xml version="1.0" encoding="UTF-8"?>
<nican_config version="0.1">
<saved>8/8/2005,17:58</saved>
<message name="TransmissionFluids">
<id extended="0">82</id>
<dbc>C:\Program Files\National Instruments\NI-CAN\example.ncd</dbc>
<conflicts>0</conflicts>
<bytes>6</bytes>
<interface>1</interface>
<comment></comment>
<channel name="ClutchPressure">
 <conflicts>0</conflicts>
 <bitfield start="0" bits="8" order="0" type="1"/>
 <linear_scaling factor="1.600000e+001"
offset="0.000000e+000" max="4.000000e+003" min="0.000000e+000"
default="0.000000e+000" unit="kPa"/>
 <comment></comment>
</channel>
</message>
</nican_config>
Thus, you could generate *.ncd files with simple file I/O. Having XML-specific file I/O functions simplifies this task.
-B2k

LabView Instrumentation Experiments without any Physical Interface

Hi friends I need some kind of experiments that can be made using LabView without any external Interface especially in Instrumentation (VCO,PLL,Opamp like) so please tell is it possible or I will need the Interface or can I do something in Instrumentation without Interface in LabView

LabVIEW can be used as a pure programming language (I do it all the time!). Data acquisittion or instrument control hardware is completely optional.
You can even simulate a real instrument by using simulated devices. For more complex functionality, you can simulate any other behavior yourself in software.
Of course you still have the "user interface", i.e. the LabVIEW front panel.
Can you explain in a few more sentences what you have in mind?
LabVIEW Champion . Do more with less code and in less time .

Class declaration within interface

Can a class be declared within an interface. Plz give me an example of it. And it is said that such a member class is static and public by default. Plz explain?

Yes a class can be declared with in an interface.
And any class which is decalred in an interface is implicitly public and static. Other modifiers which you can use for these classes are abstract and final.
I will give you the answer what i assume. an interface comes in to effect only when it is implemented by a class. whatever you declare in interface should be visible to whichever class implements, so it is implicitly public.
i think you might have come across static nested classes where you can acces the static class inside a class without instantiating the outer class. its similar in interfaces. since you can not instantiate an interface you can use(instantiate) the class defined in interface only by defining it as static and using the interface name while instantiating it..

Not possible to scroll the menu without lagging - Set Up a Repair service is not working

Hi,
It is not possible to scroll the menu without lagging.
The latest version has been restored but nothing.
I think the touch screen is having some problems.
I wanted to use the Set Up a Repair / Send In for service but it seems that the application form doesn't working.
As soon as push the Continue button, nothing happens.
Is there anybody from Apple who can check this issue please?
Thank You.
Anmary

Restoring a phone from a backup will put the device back to the state it was when the backup took place, i.e. all info that you had on that phone before using the backup will be gone.
You could try to restore the phone, which will back up the actual data on the phone, including the passcode, and use this backup to set up a new phone with. The passcode will still be the same, because it is part of the backup.
More info here, iPhone and iPod touch: Wrong passcode results in red disabled screen
Not being able to fill in the passcode is not much different from forgetting it.
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Also have a look at this one: iTunes: About iOS backups

Payables Open Interface Pgm fails without any error(Very urgent)

All,
I'm into an integration project where in I'm pushing Invoice doc from a third party appln to Oracle apps (11.5.10.2) thru payables open interface. The integration is smooth till today. We pushed a record today, but the concurrent neither picks up the data but failed with 'completed error' status. When I delete the same record from the interface, the concurrent runs fine. So we are sure there is some issue with the data in my record. Since concurrent is failed without any reason, from where I can get the log to know what is the actual problem with that record? Pls help me with your inputs.
Thanks,
Sen

Sen,
To enable trace, please refer to this document (skip the part about generating TKPROF, just check the concurrent request output file if more details about the error are logged after enabling trace and setting the profile option).
Note: 453527.1 - How To Trace a Concurrent Request And Generate TKPROF File
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=453527.1
The database log file can be usually found under $ORACLE_HOME/admin/<SID>_<hostname>/bdump directory (or from SQL*Plus, issue "show parameter background_dump_dest").
Regards,
Hussein

Is it possible to backup my iPhone without getting into the phone?

I have a white iPhone 5c 16GB. It's my second time owning one, and the current one I have is from Asurion insurance company. I have heard those have been refurbished, so when I received my current phone I felt like it had already been old. iPhones don't have long life spans, for one. I would drop it a couple times and the edge of the screen would pop out but i would just push it back in using some force. Another problem it had is that it would die even when it had about 30% of battery left. Earlier today, it did the same. Trying to get my charger, the phone accidentally fell off of the bed while it was dead. As usual i check for cracks or the screen popping out and that didn't happen. I charged it and when i tried going on my phone I was only able to use half of the screen. The other half was covered in those lines that appear when the screen is damaged. My immediate reaction was to plug it into my laptop to backup the phone before more damage happened to the phone but I had procrastinated on updating itunes. It took about two hours for iTunes to completely download. Meanwhile the screen had just completely failed on me showing only the colorful lines, but i was still receiving calls and the phone could still vibrate, i just couldn't see or check anything at all. Once i was going to back it up, itunes said my phone was in recovery mode and that i had to restore my phone. I have precious photos that i want to keep when i get a new phone. Is it possible to backup the phone without using itunes and just using icloud? its saying my phone is connected yet im unable to see any proof of that other than the sound my laptop makes when i plug it back in. Also, if that doesn't work or is not possible, will i be able to just stick my sim card into a new phone and will i be able to keep my data?

That's what I figured. When i go on icloud it shows the bar of the storage, and since i havent purchased extra, i only have the free 5gb. in icloud the bar shows the amount ive used and it says "backup" on the bar. It's not a link it's just a label. Does that mean it's backed up automatically on icloud?

Is it possible to declare an interface without any methods?

Similar Messages

Maybe you are looking for