Is it possible to receive for multiple Warehouses in same Purchase Order?

It is possible to have multiple lines with different shipTo warehouses in SAP B1. However, the print out of PO or Delivery only takes the address of the first PO line (as company set to use warehouse address in company setting).
Is it possible to get Purchase Order print out or GRPO print out with two different shipping addresses one per PO line in this case?
Thank you.

Yes It is possible be then you have to set address of printout on Line Level........
This is possible in Crystal report where you can design based on query....
Regards,
Rahul

Similar Messages

  • Is it possible to search for multiple folders with the same name and...

    Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.

    user11919409 wrote:
    Is it possible to create a Clone database with the same name of source db using RMAN ...
    yes
    >
    DB version is 11.2.0.2
    Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
    Handle:     user11919409
    Status Level:     Newbie (10)
    Registered:     Dec 7, 2009
    Total Posts:     102
    Total Questions:     28 (22 unresolved)
    why do you waste time here when you rarely get any answers to your questions?

  • How to restrict login for multiple users having same Role

    Our Web Application is deployed on Tomcat 5.5
    The requirement is ?
    There are roles in application like "operator", "admin"?
    There are multiple users created for each of the above role.
    When one user of "operator" role is logged in, then
    It should not allow to login for another user of "operator" role.
    Also, if user did not log out & application gets close, then
    It should not allow to login for another user of "operator" role.
    Also, it should not allow to login for multiple requests of same user
    (using another browser instance...)
    Is it possible using session object?
    But, using session object, it will create separate objects for different users,
    So here I will not be able to restrict session object creation rolewise.
    Also, how to retrieve these multiple session objects created for different users on server?
    If anyone is having the solution please reply as soon as possible,
    Thank you.

    To tell you the truth, this is a stupid requirement. It must be an extremely fragile application.
    In any case, you will have to write your stuff for that. Probably a filter that on login, logout, and session expiration checks, makes, or removes entries in a DB (using a synchronized resource to prevent race conditions) or possibly even simply in an application context object.

  • Posting multiple invoices against single purchase order line item

    Hi,
    We receive invoices on completion of certain milestones and Goods receipt is done when the final lot of material is delivered.  For example the purchase order may be to deliver 1 quantity of Machine.  Material is supplied in bits like Gear Box, Engine and body.  Invoice is received when Gear Box, Engine is supplied. Final invoicing is received on completion of delivery (taking into account what has already been delivered)
    Goods Receipt in SAP needs to be posted only once when complete machinery is delivered (the tracking for different parts delivered is done outside SAP).  However, the multiple invoice needs to be posted in SAP referring to same PO item (Please note PO quantity for complete assembled material is only 1).
    This needs to be treated as material and not service in SAP.  Can you please suggest how to book multiple invoices for same purchase order line item?
    Thanks

    Hi Charan
    Thanks for your reply.  However, both the options are not feasible.  Invoices can be received in different periods, sometimes over different months or years, hence needs to be booked immediately.
    Also, i cannot create material master for each component as the quantity for the final material is only 1.
    Any other alternatives?
    regards
    Sameer

  • Is it possible to change the vendor in a saved Purchase order

    Is it possible to change the vendor in a saved Purchase order
    Regards
    Amit

    Hello, Amit,
    no, but you can change the partner functions in the PO, like "Invoicing Party", "Vendor", "Goods Supplier" -- depends on you customizing for partner schemas.
    However, this should be used only in case when during the purchase order lifecycle the partner has been changed (as result of merger, bankrupcy, factoring); otherwise, it is much easier to simply delete the PO and create a new one.
    Kind Regards
    TomT

  • NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

    I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
    F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
    THANKS/

    Hi Malka,
    It's possible set the system to mark automatically the delivery completed indicator.
    First you need to set the under delivery and over delivery tolerances.You do this in customizing:
    Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
    Once you set this, you can insert this value keys on Material Master Record for the materials.
    When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
    In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
    In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
    You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
    You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
    Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
    Regards,
    Rodrigo

  • Inbound idoc for updating delivery date of purchase order

    Hi All,
    Our vendor sends a delivery file consisting of delivery date and quantity(could be partial) for line items of a purchase order.
    I need to update the Purchase order line item with the delivery date and quantity sent from the Vendor. It should add a new confirmation line with custom confirmation category in the confirmation tab of the line item in the Purchase order.
    Each time we get a delivery file we need to add a new confirmation line in the confirmation tab of the purchase order line item.
    How can I get this working using inbound idoc processing? Which Idoc type should I use to solve my issue. Will ORDERSP work for my scenario?
    Thank you,
    Sonali.

    >
    sonali ashi wrote:
    > We have all EDI set up done for ORDERSP idoc in our system. Problem when I use this idoc type by default system is always adding confirmation catgeory 'AB' but we want our custom  category to be added instead of 'AB'.
    > Edited by: sonali ashi on Dec 23, 2010 9:47 PM
    Confirmation category used for order acknowledgement is define in configuation. You can change that from AB to your custom condition and EDI should pickup that.
    SPRO->Material Management->Purchasing->Confirmation->Define Internal Confirmation Category
    >
    sonali ashi wrote:
    > I have also noticed that 'AB' confirmation accepts only full quantity order acknowledgement through Idoc processing.
    > Manually I can add a "AB" confirmation for partial quantity but in the idoc processing it fails.
    > Edited by: sonali ashi on Dec 23, 2010 9:47 PM
    Check tolerance limit defined for confirmation category in 'Conformation Control' Node in SPRO at same level as above.
    Regards,
    Pawan.

  • How to enter a specific vendor for  the delivery costs in purchasing order?

    Now I want to create a purchasing order including planned deliver costs such as Freight, Coustoms ect, as the vendor of such planned deliver costs is different from the goods supplier, then How to enter a specific vendor for  the delivery costs in purchasing order? That means the partner for invoice partner will be two vendors at least in one purchasing order. thanks very much.
    <i>
    <b>No one would like to answer this question?</b></i>
    Message was edited by:
            King Qi

    hi, 
    You can have vendor at each condition record level.
    try it out.
    cheers
    Rav

  • Cant able to do UD for Goods Receipt Inspection against Purchase Order

    Hi Experts,
    I am facing problem while doing UD for Goods Receipt Inspection against Purchase Order.
    The Problem is,
    "Selected set code does not exist, or data entered is incomplete
    Message no. QV121
    Diagnosis
    Code  in code group * (selected set 1000 in plant ) does not exist.
    Procedure
    Enter a valid combination or complete combination, or make sure that the combination is available in the selected set."
    And the Result Recording for Inspection lot is completed.
    kindly suggest..
    Thanks in Advance,
    Naveen

    Hi Naveen,
    1.     Go to QCC0 > Quality inspection  >  Inspection lot creation  > Maintain Inspection Types > Select 01 (or the type which you are using) and double click on it.
    2.     Check what code is maintained in UD Selected Set
    3.     Create the same code in QS51 for your plant.
    Regards,
    Anand Rao

  • Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note)

    Hi Experts
    I was looking for Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note),
    Please share.
    Regards
    Sandeep

    Hi Ritesh
    Thanks for your reply,
    I checked  both of these transaction  we need to select 3 option Characetrstics frm configuration(prio) and classification. I will check that, I had one more question
    In PO VC configuration is called for class type-300  and  in GRN VC configuration  is called for class type -023. How it will fetch the variant class configuration to Batch class configuration?
    Once we had faced some issues the copy from PO to GRN was happening for some batches & some batches it was not happening.
    yes we have activated Mill Functions in our ERP box.
    Regards
    Sandeep

  • How can I purchase FormsCentral premium for my organzation with a purchase order?

    How can I purchase FormsCentral premium for my organzation with a purchase order?

    Hi;
    A FormsCentral subscription purchase requires a credit card in one of the supported countries for purchase.  It cannot be purchased using a purchase order, only a credit card.
    Thanks,
    Josh

  • AS2 receive for multiple vendors on the same http address?

    Hi all,
    Got a question about AS2 and MDN generation with BizTalk 2009.
    We currently have  a Request Response Receive port set up to point to a local http address, pointing to /EDI/BTSHTTPReceive.dll. We currently have Vendor1 sending us files through this port correctly, and through BizTalk’s
    tracking features I can verify they are getting the MDNs back.
    Now, we set up a second vendor (let’s call it Vendor2) to use the same location and http address. When they send us files, we get them fine, but they don’t get the MDN back any longer. BizTalk’s tracking is showing a 0 bytes response
    being sent back to them.
    I suspect this is happening because the http receive location, on its Certificate tab, has the certificate for Vendor1 specified, and not Vendor2. Is that what the issue is? In other words, do separate vendors, with different
    certificates, have to have a different unique receive location and http address? Or is there a way to just use one address for all vendors to keep it simple?
    Thanks!

    Hi,
    In my opinion, it maybe impossible that multiple
    sender partners can have same certificate. And please refer the similar discussion which might helpfull:
    http://social.msdn.microsoft.com/Forums/en-US/f598a663-ec8e-4ce9-bb3f-5d4ba50faedf/as2edi-multiple-parties-with-same-certificate-errorparty-signature-certificate-should-be?forum=biztalkediandas2
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

  • Triggering a sub work flow for multiple users at same time.

    I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
    This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
    How can this be achieved?

    Tyr to do like this,
    1. First include the subworkflow in the main workflow template.
    2. Now include standard Block Step in the main workflow template.
    3. In the block select the block type as ParForEach.
    4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
    5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing  assign the multiline container element name in the   for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
    &COSTCENTER[&_WF_PARFOREACH_INDEX&]&   -------->     &_COSTCENTER_LINE&
    Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

  • Design a single template for multiple reports with different column order

    Hi,
    I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
    For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
    Thanks in advance.

    -As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
    As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
    -I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
    For the customer that want the same ordering of columns you can put those customers under one condition.
        for Example...
              if(?Client in ['clientA','clientA']) then
                        <TableName>.<Field>......
    -What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
    Regards,
    Amrita
    Edited by: Amrita Singh on May 21, 2009 7:54 AM

  • ASSET CODE FOR ACCOUNT ASSIGNMENT CATEGORY IN PURCHASE ORDER.

    Sir,
    greetings!!!
    here is a procedure we follow...
    We create asset code(AS01) for capital items. when createing Capital purchase order for the item, we give A as asset for assignment category which then asks for asset code in acc assignment cat tab. this is a general process.
    Now problem is that I want the field of account assignment category in PO item tab to be automatically populated with the asset code at the time when I put the material and plant i.e capital item.
    Is it possible.
    What is happening is that the user while creating PO is not at all selecting correct asset code with reference to capital item, that has a huge effect on asset accounting..
    please provide

    Hello,
    As such there is no standard thing available, but there is one thing that you can do, that is
    Create a PO document type for Assets and for that document type allow only account assignment A and delete rest including standard account assignment that is blank.
    This way, once a person choose the document type for Assets, he will have to give the account assignment A.
    Regards
    Prabhjot Singh

Maybe you are looking for