Is my connection any good after 21CN upgrade?

Hi,
My exchange recently was upgraded to 21CN, the line has been trained the service was migrated over 10 days ago. My line is close to the exchange. According to BT Speedtester I could achieve 21mb.
The stats from my router (Cisco SRP547W-E-K9) are as follows:
DSL Status:
Showtime
DSL Modulation Mode:
ADSL2+
Downstream Rate:
15332 Kbps
Upstream Rate:
1171 Kbps
Downstream Noise Margin:
5.9db
Upstream Noise Margin:
6.0db
Downstream Line Attenuation:
19.0
Upstream Line Attenuation:
7.5
Downstream Transmit Power:
0.0
Upstream Transmit Power:
12.2
During the 10 fday training I did have to reset the router several times a day as I work from home and some times the internet became completely unusable.
Any advice on the health of the line from the stats above would be really appreciated.
Regards,
Craig

Hi,
The test results are as follows:
1. Best Effort Test: -provides background information.
Download Speed
12.79 Mbps
0 Mbps
21 Mbps
Max Achievable Speed
Download speedachieved during the test was - 12.79 Mbps
For your connection, the acceptable range of speeds is 4 Mbps-21 Mbps.
IP Profile for your line is - 13.53 Mbps
2. Upstream Test: -provides background information.
Upload Speed
0.8 Mbps
0 Mbps
0.83 Mbps
Max Achievable Speed
Upload speed achieved during the test was - 0.8Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.

Similar Messages

Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07

Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07, also when I click on any prompt button the prompt values are displaying in a separate screen rather than displaying in a model window.

I have resolved it by applying stylesheets and clearing the cache.
Thanks,
Jayaprakash Tedla

I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable DVD/USB stick to install using this free program.
Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
Mavericks is supposed to be released this fall, so you may want to wait.

HTF do i get my iPhone to connect to network after iOS7 upgrade? (Upgrade--really?)

HTF do i get my iPhone to connect to network after iOS7 upgrade? Upgrade? Really? I'm just really upset that I have to continually make concessions to someone else and my product does NOT work the way it should, and has done in the past!!!!

Depends on your browser and it may appear in your downloads folder to run. If you are using IE, it will appear on the bottom of the screen, Google Chrome, bottom of the screen, Firefox, top of the screen with an big arrow

Slow Broadband after 21CN Upgrade?

Before my scheduled 21 upgrade my download connection has been rock solid at 8000K for several years. My whole recent experience with BT has been very disappointing and I hope you can throw some light on a solution.
So Far:
My Equipment: BT2000 Faceplate, RJ11 to BT Homehub 1010, 1 Extension fitted (No Bell wire Connected).
Problem 1. Now resolved. On the day of my appointment the engineer connected my dial tone and broadband to someone else’s line in the next village. The fault call centre insisted the fault could only be in my property as the line tested OK and I would have to accept the possible charges. Despite my requests for them to despatch an engineer to the exchange as it is more than a coincidence that my dial tone disappeared at the same time as my scheduled changeover they insisted I have an appointment. The fault was cleared in the exchange by the visiting engineer.
Problem 2. Now resolved. The engineer did not remove the call divert on my line and I missed my incoming calls for several days as my calls were diverted to a random number. I tried #21# and this did not work, so I contacted BT again. They informed me they could not remove the divert because they had not put it on. After investigation #61# managed to remove my divert. When I asked why it was not removed when my line was fixed I was told that I must have put the divert on myself as it was done by someone with access to my line. The whole point that my line had been connected elsewhere was totally alien to the call centre worker.
Problem 3. On going
After 14 days of Mediocare performance I was connected much slower speed than my old connection and as my profile was 4000k this is only half of my previous performance. (See Below)
1. Best Effort Test: -provides background information.
Download Speed
5959 Kbps
0 Kbps
4000 Kbps
Max Achievable Speed
Download speed achieved during the test was - 5959 Kbps
For your connection, the acceptable range of speeds is 1200-4000 Kbps.
Additional Information:
Your DSL Connection Rate :4603 Kbps(DOWN-STREAM), 1251 Kbps(UP-STREAM)
IP Profile for your line is - 4000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 16.4:29.53:54.07 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
873 Kbps
0 Kbps
1251 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 873 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1251 Kbps
So I call BT again and after I have established that the only changing parameter is the new 21CN upgrade I am promised that a request will be passed to the engineers to increase the profile........ The result is that they just reset my profile, so once again my speed fluctuates for several days from a virtual stop to slow.
It is now six days since reporting my slow speed problems after receiving several calls from BT to ask me if my speed has improved, I am finally a broken man today.
They insist that I have a broadband boost engineer, before I accept this, I ask several questions and failed to get any acceptable answers..
What is wrong with my broadband? You have a fault in the property (change the record!!)
Why cannot you tell me the speed I am connected at. You cannot WOOSH test me? We cannot tell, we have to call you
Can I speak to the engineers? You cannot Sir
Can I speak to your Boss? No, why would you want to do that!
What have you done in the exchange to fix my fault? We have changed some things
Do you thing it is acceptable to still have slow speeds after twenty days? That's why you need a boost engineer
What are you going to do differently from all the other people I have spoken to to resolve my issue. Nothing
So with no other option I accept that an appointment will have to be made again. I am offered an appointment in the week, when I explain that I have business appointments and that I need a weekend appointment I am told none is available or would be available. So I agree to a Monday appointment. After the call I get a text to say I have an appointment has been made for Thursday! So I have to call them back and ask for the appointment I have been promised and I am told it's a simple and easy mistake to press the wrong button, it happens quite often!!
I since read here that it may help to upgrade my homehub, so why have they not sent me a replacement days ago?
Current Performance:
1. Best Effort Test: -provides background information.
Download Speed
2024 Kbps
0 Kbps
2000 Kbps
Max Achievable Speed
Download speed achieved during the test was - 2024 Kbps
For your connection, the acceptable range of speeds is 800-2000 Kbps.
Additional Information:
Your DSL Connection Rate :2271 Kbps(DOWN-STREAM), 771 Kbps(UP-STREAM)
IP Profile for your line is - 2000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 13.35:23.63:63.06 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
592 Kbps
0 Kbps
771 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 592 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 771 Kbps
I know there are more important things going on in this world. But my work, my ebay, my shopping, my banking, my social sites etc. all require bandwidth and to have it taken away disguised as an upgrade obviously upsets me. I am shocked at the complete lack of communications, and the inability to listen and understand your customers. What is the point of a call centre that can do NOTHING outside their script to help!
Solved!
Go to Solution.

Not sure why my profile is still changing and why I was disconnected today, probably the call centre doing another line test.
Uptime:
0 days, 10:24:37
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
803 / 2,523
Data Transferred (Sent/Received) [MB/MB]:
322.86 / 348.70
Output Power (Up/Down) [dBm]:
12.0 / 0.0
Line Attenuation (Up/Down) [dB]:
19.0 / 31.0
SN Margin (Up/Down) [dB]:
13.5 / 30.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
1 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
1 / 0
FEC Errors (Up/Down):
0 / 0
CRC Errors (Up/Down):
0 / 0
HEC Errors (Up/Down):
0 / 0
Line Profile:
Fast

Extremly slow BB After 21CN upgrade

On last wednsday exchange in Dungannon got a 21CN upgrade. I thougt yea great news finally i'll get more than 9-10 Mbits. I must admit that before upgrade my bb was rock stable no problems at all ofc some minor dissconections occured during a 4 year period but it happens right? But after the Exchange upgrade my broadband is awfully slow it's almost like dial-up connection, i can't even do my work from home or use internet services which i've paid for upfront.
I've posted on forums recently i was told to leave my hub on 24/7 for few days, and it should solve my problem,since the line need to settle down after the updrade. But it's already 6th day after the upgrade and nothing changed .... well almost nothing ...
Here are the stats from my hub taken todays morning.
ADSL line status
Connection information
Line state Connected
Connection time 5 days, 0:47:10
Downstream 283 Kbps
Upstream 440 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.5
Latency type Interleaved
Noise margin (Down/Up) 22.9 dB / 30.3 dB
Line attenuation (Down/Up) 29.0 dB / 16.1 dB
Output power (Down/Up) 0.0 dBm / 12.9 dBm
Loss of Framing (Local) 0
Loss of Signal (Local) 0
Loss of Power (Local) 0
FEC Errors (Down/Up) 208 / 0
CRC Errors (Down/Up) 0 / 2147480000
HEC Errors (Down/Up) nil / 0
Error Seconds (Local) 0
When i got back from work about 5pm connection went down for a short period of time (i belive i've been resynced or smth like that) and afterwards my stats look like that
Line state
Connected
Connection time
0 days, 2:11:13
Downstream
283 Kbps
Upstream
1,108 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
22.1 dB / 9.0 dB
Line attenuation (Down/Up)
29.0 dB / 16.2 dB
Output power (Down/Up)
0.0 dBm / 12.9 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
2315 / 4294967264
CRC Errors (Down/Up)
0 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
0
im very happy cuz finally i can send files to my employer faster also uploading stuff for my private use/backup is easier now but what the **bleep** is with downstream speed? i can understand that setting up new exchange equipment can take some time, same goes for stabilization of the line but how long do i need to have to wait till i'll get what i'm paying for?
P.S excuse my english it's not my native language
Forgot to add speedtest results
Solved!
Go to Solution.

I know exactly what you mean = probably find most people on the forum know the feeling. the speed down is very low but as I said BT will not do anything while still in the training period.
if no change after 10 days training the contact mods for assistance http://bt.custhelp.com/app/contact_email/c/4951
just fill out the form
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Ipod wont connect to imac after i upgraded to OS 10.6.8

my one Ipod touch ( 4th Gen) will not connect to my imac, noticed this happened after i upgraded to snow leopard OS 10.6.8, my other ipod nano works fine and is seen in my finder and in Itunes, the Ipod touch does work on my PC laptop with no problems but my library is on my Imac so it doesnt help me.
I went through the entire diagnostic that apple support gave me, but no luck.

So you tried everything here?
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Including the Additional Information paragraph?

Connectivity speed plummet after Mavericks upgrade

I ran a speed test from my iMac (2.66 GHz Intel core 2 Duo) after Mavericks upgrade and I'm only getting 0.06 Mbps download over 5g WiFi with a 20 Mbit Time Warner Turbo Cable account.
The App Store app seems not to respond either when attempting to download updates.
Any thoughts?
Thank you.

I have experienced the same issues since the official release of Mavricks. I have even had my cable provider out to swap my modem. In all of my testing... the issue is clearly Mavricks. I have incredable speeds on all devices exept my mac no that Mavricks was installed.
We are talking a 500-700% difference in speeds. This was not always the case and has only been an issue on the 1 machine since the upgrdade.
When I find that my speeds are crippled, a restart of the wifi adapter will usually fix the issue for the time being. It WILL return with in a few hrs to 24 hrs.... unacceptable in my book.
I have since upgraded another mac on my network and we will see if it suffers the same fate.

Cannot Connect to VPN After License Upgrade

Hello,
I am having an issue where I can't connect to VPN after upgrading the license.
The license upgraded is related to AnyConnect VPN.
I noticed from the newly upgraded license, the Encryption-3DES-AES is disabled whereas previously it was enabled.
Could it be the cause of the issue?
ASA 5512-K9
Version 8.6(1)2
Thank you in advance.
Regards,
Zul

Hello,
It is,
here you have the link to request it for free
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=139
Regards

No Network Connectivity on G4 after Tiger upgrade.

Yes, I know the machine is ancient. It's a Power Mac G4 with dual 1.25Ghz processors. Has a built in Airport card.
I did a clean install of the Mac OS the machine came with... 10.2. Airport worked fine, was able to get online.
Then, I did an upgrade to Tiger (10.4). After the upgrade ALL network connectivity is gone, cannot connect via Airport or Ethernet.
Airport card still shows up in system profiler, and the status icon is next to the time display. However, it is greyed out, and zero networks show up as being available. There are at least 5 networks available on my other Macs.
Also, Ethernet connection doesnt work either. Again, works fine when plugging the same Ethernet cable into my MacBook...works wonderfully via Ethernet. When connected directly to the Power Mac G4 however, no connectivity. No IP address at all. I've even tried doing a manual IP address, to no avail.
PLEASE HELP!!

Hi again, apply this...
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
Does that do anything?

Unable to connect to Internet after Secruity Upgrade - Any Suggestions?

Like several of the previous posts I am unable to connect to the internet. The affected computer is a G3 iMac. It is connected to a Linksys wireless access point. The Linksys wireless router is connected to my cable modem. I get a message that the Built-in Ethernet is active but: Built-in Ethernet has a self assigned IP address and you may not be able to connect to the internet. No combination of changes to the settings has had any effect. I also have tried all of the fixes in the previous posts. None of them have worked. I am not experiencing any connectivity problems with my other computers (2 PCs and 1 Macbook). Everything worked fine until that danged "security upgrade"!
Mac and PC Mac OS X (10.3.9) Win XP Pro

Visit http://www.macfixit.com/ where the have been
running articles on how to solve problems arising
from the security update.
Thank you for the link to MacFixIt. I found what I needed to correct the problem, although all of the fixes referenced computers with the AirPort card and software. I found that removing the extensions AppleAirPort2.kext and AppleAirPortFW.kext solved the problem. Everything seems to be working properly after a restart last night and an overnight shutdown.

Slower speeds after 21cn "upgrade"

last saturday my internet went out (flashing orange light) and after 3 days they traced the fault to the fact that they were actually upgrading our exchange MRLOW lower peover to 21cn and i was told that when it all came back on i would be on 21cn broadband and my speeds would be alot faster than i was getting now so i was happy to wait. after 5days it came back on but my speeds are actually worse than before the upgrade. before i was synced at 2mb. could i get switched to the new and improved 21cn speeds please?
i was also told that after 3days of no broadband you can get that months broadband cost refunded as compensation, can i get that actioned too please?
Download speedachieved during the test was - 0.11 Mbps
For your connection, the acceptable range of speeds is 0.1 Mbps-1 Mbps.
Additional Information:
Your DSL Connection Rate :1.15 Mbps(DOWN-STREAM), 0.29 Mbps(UP-STREAM)
IP Profile for your line is - 1 Mbps
Line state:
Connectedppp0_0
Connection time:
3 days, 23:43:01
Downstream:
1.125 Mbps
Upstream:
288 Kbps
Solved!
Go to Solution.

you can see from the checker results the adsl2 increase is minimal if at all. what's worse is if you had stability problems with adslmax then 21Cn will not help and may even make matters worse as it is far more aggressive on any line noise
looks like the fixed 2mb connection may still be best for you
as you appear to have dropped to a fixed 1mb connection I have asked mods to help and they will post a contact us link on reading this
After completing the email NOT PM then you join a queue of other customers waiting for mod help. The mods will get back to you in 3/5 working days either by phone or email
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

WRT350N problem connecting to wireless after firware upgrade to 1.04.4

I have a WRT350N which has been in service for some time without any real trouble. I connect to it with a variety of laptops off and on and a ps3. Recently, my wife's laptop began disconnecting randomly and frequently. I repaired her windows after the usual tricks didn't help. After the repair, her problem was gone for a few weeks, then returned. It is a Dell Lattitude 110L and I suspect the wireless device in it is giving up. But I thought I would see if there were any firmware upgrades for my router, in case there was help for the situation that way. I was running 1.03.8 and 1.04.4 was available. So I downloaded and installed the upgrade.
My wired network continued to function just fine. But now none of my laptops or the ps3 could connect to the wireless. They saw the SSID being broadcast. They did key exchange. They requested a dhcp address, and then the connectionstopped being answered by the WRT350N. I tried many things. No joy. Decided to contact Cisco support via live chat. They had me change a number of settings for thresholds and channels and such with no effect. While doing this, I happened to notice that wireless QoS was disabled and the help says that by default it should be enabled. I have never changed this setting myself. In desperation, I put all the setting which Cisco had me mess with back to their defaults (where they were before Shaharyiar tried to help me) and I tried setting wireless QoS to enabled. Bingo. All my laptops and the ps3 now connect again. I suggested to the agent that they log this as a bug in the upgrade or the firmware. I got the impression that might not be followed up on, so I am posting my story here in the hopes it may prove helpful to others.
dennis

If you have other devices on your network that support Wireless QoS, select Enabled. Otherwise, keep the default, Disabled.
Thanks for the information. Your post will definitely help other users.

How do I connect to server after an upgrade?

I connected to my computer/windows & downloaded iOS 7.1.1 software for my 4S yesterday, but didn't upgrade.
Now, when I go to upgrade phone, it reads 'not available' because phone cannot connect to server. I know it has to do with setting up email on phone correctly, but I'm not sure how to set it up in Phone & can't get to Apple bar right now...can anyone help me? I have 3 gmail accounts & iCloud acct, but main one is AOL, and having trouble Thanks for any suggestions!

Hey cetteferge!
It sounds like you may be having an email problem, so try using the troubleshooting steps in this article to help you resolve this issue:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Error while connecting to Database after Database upgradation

Hi All,
I installed and worked with BAM and used Oracle Database 9i previously. After the Database
was upgraded to 10g (10.2.0.4.0 which is compatible for BAM), I am trying to ReInstall BAM
which is throwing me an error.
It accepts the Database Login Information but at the step of building Repository for
Enterprise Link it gives up the following error:
' A connection with the database cannot be made '
Can anyone please help me to figure out this one.
Thanks,
Vishal

Hi,
I also have the same problem.Could you plz tell us what configuration I need to add in tnsnames.ora file.
content of my tnsnames.ora file is below
# tnsnames.ora Network Configuration File: C:\DevSuiteHome_2\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Rahul-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
)

Is my connection any good after 21CN upgrade?

Similar Messages

Maybe you are looking for