Is possible to change a crashed display?

i've broken the display of a 1st generation Ipod. on ebay there are lots of display, but i don't know if are compatible or not... Apple don't sell spare parts?
thank you.

Thank you... i've talked with an ebayer that had bought it.
he says that is so simple to change. you can pry the player with a screwdriver, between the cover and the metallic face. after you have only to unscrew two screwes and draw the connexion.
thank you so much.

Similar Messages

  • Is it possible to change what is displayed in the GAL in Exchange 2013

    We have always used [email protected] for our primary email addresses, and to facilitate this someone back in the days of Exchange 2003 decided it would be sensible to use the firstname.lastname
    format for our alias. This means our primary email does not match our UPN. Now, we are moving to Exchange 2013 and want to use autodiscover we find we need to change this so primary email and UPN are the same while still retaining the original email
    addresses. Easy enough change, powershell script to modify the alias, new address policy on the 2013 server and migrate your users, changes made for you.
    However, this has caused some concern amongst the senior management because it changes what is displayed in the GAL, so instead of the friendly first.last name listed under alias and the just as friendly
    [email protected] listed under email address it will now show the UPN as alias and
    [email protected] for email.
    I have now been asked to see if it is possible to modify the details displayed in the GAL, I know you could in previous versions of Exchange using things like EMC, but I don't see any way of doing this in 2013.
    Is this possible, and if so how?

    We have always used [email protected] for our primary email addresses, and to facilitate this someone back in the days of Exchange 2003 decided it would be sensible to use the firstname.lastname
    format for our alias. This means our primary email does not match our UPN. Now, we are moving to Exchange 2013 and want to use autodiscover we find we need to change this so primary email and UPN are the same while still retaining the original email
    addresses. Easy enough change, powershell script to modify the alias, new address policy on the 2013 server and migrate your users, changes made for you.
    However, this has caused some concern amongst the senior management because it changes what is displayed in the GAL, so instead of the friendly first.last name listed under alias and the just as friendly
    [email protected] listed under email address it will now show the UPN as alias and
    [email protected] for email.
    I have now been asked to see if it is possible to modify the details displayed in the GAL, I know you could in previous versions of Exchange using things like EMC, but I don't see any way of doing this in 2013.
    Is this possible, and if so how?
    You can use the Details Template to change what the GAL shows.
    http://technet.microsoft.com/en-us/library/jj673049(v=exchg.150).aspx
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Is it possible to change the number of weeks to be displayed in the month view in calendar (mavericks)?

    I'd like to know if it's possible to change the number of weeks to be displayed in the month view in calendar? Thanks!

    No.
    There are up to six calendar weeks that might be used to display the 31 possible days in a month.
    So the month view displays six weeks.

  • Does anyone know if it is possible to change the display in week view to show 24 hours per day for those of us that work irregular hours

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

  • Is it possible to change the number of rows to be displayed in adf query ?

    Hello,
    is it possible to change the number of rows that are displayed in an adf query similar to an adf form ?
    I need to display approx 5 rows per column instead of displaying all the fields in a single column ? Thanks.

    Thanks , how do you add in the code ,is it something like follows :
    <af:query id="qryId1" headerText="Search" disclosed="true"
                                value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
                                model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
                                queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
                                queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}">
                        <af:inputText value="#{bindings.PrtDesc.inputValue}" label="Desc"
                                      required="#{bindings.PrtDesc.hints.mandatory}"
                                      columns="#{bindings.PrtDesc.hints.displayWidth}"
                                      maximumLength="#{bindings.PrtDesc.hints.precision}"
                                      shortDesc="#{bindings.PrtDesc.hints.tooltip}" id="it3">
                          <f:validator binding="#{bindings.PrtDesc.validator}"/>
                        </af:inputText>
                      <af:column>
                       <af:outputtext/>
                        <af:outputtext/>
                     </af:column>
                      </af:query>

  • Change default boot display, is it possible?

    Hi!
    I have MSI N660 TF 2GD5 OC card with two devices connected: 1) LCD monitor via DVI-D, 2) Projector via DVI-A.
    Every time I turn on the PC I don't see anything on monitor until Windows starts. Video output during boot process goes to projector even though it's turned off.
    Is it possible to change default output during system start up?
    Swapping connectors isn't possible physically, because DVI-A have extra pins that won't fit to another socket.
    If not, whats socket "default priority"? I'm thinking of buying hdmi cable for my projector to fix issue, will it help?

    The dual link DVI-I connector you are most likely using for the DVI-A device is the primary connector. If it is connected to any display it will always be used for primary display when starting.
    Solution would be to use the Projector with a DVI-A or I to HDMI or Displayport adapter or DVI-A or I to DVI-D adapter so you can use the monitor with the DVI-I connector.

  • (FM8p277) Crashes when saving first doc in book after changing conditional text display

    That was a mouthful :-)
    Okay, this happens with any of the books that I work on --- it never happened with Frame 7.
    I have a book containing several documents.
    The documents contain several conditional text segments.
    Start new Framemaker session, open book, open all documents.
    Change conditional text display (from Show All to Show Selected, or vice-versa).
    From the book, choose Save All (or from the *first* document, choose Save). The following text appears in a 'FrameMaker dialog': "File <filename of first document>.fm has changed on the disk since you last opened or saved it. Someone else has probably modified the file. Do you want to save it anyway?
    Click OK. All of the files save properly. (If I had clicked Cancel, the first file would be skipped and all other files would save.)
    Change conditional text display again (note: this could even be for a different book at this point, I believe, but will have to verify).
    (Repeat step 3): The same text appears again in the dialog.
    Click OK. FrameMaker crashes while trying to save the first file. (If I had clicked Cancel, the first file would be skipped and all other files would save. However, if I attempt to save the first file afterward, FrameMaker still crashes.)
    Anybody have any insight into this? Am I the only one this happens to? Argh :-)
    Thanks.

    Sorry, the only answers I got were on the forum and nothing worked
    That being said, at least now I know I'm not crazy! (Sorry it had to
    happen to you, though.)
    As it stands, I've been training myself to make sure that after the
    first time I toggle the settings, I do the save, and then make sure to
    save all, quit, and restart FrameMaker before I attempt another toggle.
    On the odd occasion that I don't do that and get the warning message, I
    select Cancel (which lets the rest of the files save), quit, restart,
    and then make sure I update the first document appropriately.
    All the while cursing and swearing, of course
    As an aside... if you find a solution, please let me know about it if
    you remember.
    Thanks.
    John

  • Is it possible to change the display order of Apple TV applications on my home screen?  i.e. move Watch ESPN toward the top, move the WSJ to the bottom, etc.

    Is it possible to change the display order of Apple TV applications on my home screen?  i.e. move Watch ESPN toward the top, move the WSJ to the bottom, etc.  That way you won't have to scroll all the way down to the bottom to access an applicaton you use most often.

    Yes. Just select and hold until the app starts to jiggle and then you can move it.

  • Is is possible to change the hourly interval in the weekly calendar in 4.1?

    Hi - using APEX 4.1 and having implemented a SQL calendar. All is working fine, but I would like to change the display of the weekly calendar to show 30 minute intervals, instead of 1 hour intervals. I've look in the template, but don't see any way to change it. Is it possible to change this? Thanks.

    Hi Collin,
    Could you le me know the resolution
    Regards
    Alan

  • How to change the Group Display Name in the UME?

    Hello experts,
    from time to time due to reorganisation our departments group names change.
    So far this was a big deal because it is not possible to change the Display Name of a group created in the Portal´s UME?
    So far a new group with the department name has to be created and all group members have to be connected to the new group again. This is not a convenient way..
    Is there a way to configure the UME to allow to modify the Display Names of Groups?
    Thanks in advance.
    Thomas
    Edited by: Thomas Krynicki on Jan 19, 2009 5:15 PM

    Thank you for the quick answer.
    However my problem is still not solved.
    I am using the portal groups also as permission objects for KM. That´s why I do not want to create a new group because the new one will not appear in the ACLs of the KM Objects.
    For me it is important to modify the Display Name of an existing Group. The GroupID shall not change. The new Display Name should be updated then automatically in the ACLs of KM Objects in question.
    By exporting the group data:
    [group]
    gid=TeamA
    gdesc=All members of Team A
    user=member1, member2
    There is no parameter for changing the Display Name of the group. There is only the Description Parameter.
    So far I didn´t find any solution.
    Any other ideas.
    Thanks in advance.
    Thomas

  • Is it possible to change the order of the fields in the int table?

    Hello
    Is it possible to change the order of the fields in the int table?
    Lets say itab has the following fields :
    F1, F2, F3
    I would like to see it as F2 F3 F1
    Thanks

    >
    Comandante Che Guevara wrote:
    > Lets say itab has the following fields : F1, F2, F3
    >
    > I would like to see it as F2 F3 F1
    What do you mean by "like to see" ? You can WRITE the fields in any order you want. If you want to display the internal table in an ALV you can manipulate the fieldcatalog.
    If you want something else other than display the field, you have to explain your req. in detail.
    BR,
    Suhas

  • Is it possible to change the size of the 'Close' button in Full Screen viewing mode?

    I am currently using Firefox for a kiosk type scenario. We require that the browser run full screen. The issue is that the 'Close' button is not large enough for users to consistently see, so they're having issues figuring out how to close an active browser window.
    Can anyone tell me if it's possible to change this icon? I've tried using themes, but they tend to theme everything but the close button.
    Custom configuration details are below.
    Firefox version: firefox-3.0.4-1.el5.centos
    Customisations:
    Access to local drives disabled:
    Modified the contents of /usr/lib/firefox-3.0.4/chrome/browser.jar, so that browser.js has the added stanza:
    <pre><nowiki>if (location.match(/^file:/) ||
    location.match(/^\//) ||
    location.match(/^resource:/) ||
    (!location.match(/^about:blank/) &&
    location.match(/^about:/))) {
    loadURI("about:blank");
    }</nowiki></pre>
    Various menus & bookmarks disabled in chrome/userChrome.css
    <pre><nowiki>/* Kill "normal" bookmark icons in the bookmarks menu */
    menuitem.bookmark-item > .menu-iconic-left {
    display: none;
    /* kill icons for bookmark folders in Bookmarks menu */
    menu.bookmark-item > .menu-iconic-left {
    display: none;
    /* kill icons for bookmark groups in Bookmarks menu */
    menuitem.bookmark-group > .menu-iconic-left {
    display: none;
    /* Remove the Edit and Help menus
    Id's for all toplevel menus:
    file-menu, edit-menu, view-menu, go-menu, bookmarks-menu, tools-menu, helpMenu */
    helpMenu { display: none !important; }
    tools-menu { display: none !important; }
    file-menu { display: none !important; }
    edit-menu { display: none !important; }
    view-menu { display: none !important; }
    go-menu { display: none !important; }
    bookmarks-menu { display: none !important; }
    #autohide-context { display: none !important;}
    #bookmarksToolbarFolderMenu { display: none !important;}
    #organizeBookmarksSeparator { display: none !important;}
    .tabbrowser-tabs .tab-icon {
    display: none;
    #urlbar {
    font-family: Arial !important;
    color: Black !important;
    font-size: 26 !important; }</nowiki></pre>

    Try code like this:
    <pre><nowiki>#window-controls .toolbarbutton-icon {
    width: 25px !important;
    height: 25px !important;
    </nowiki></pre>
    The three buttons have these IDs:
    <pre><nowiki>#minimize-button
    #restore-button
    #close-button</nowiki></pre>

  • Possible to change the charset of a Web Dynpro Application ?

    Hello All,
      Does anyone knows if this is possible ? To be able to change the charset of a Web Dynpro application or even changing it dynamically ? Thank you.
    from
    Kwok Wei

    Hello Anilkumar,
      Sorry for not elaborating further again (This is getting to be a habit ;p).
      I have the document on "international of wed dynpro application" but it appears to be more on customising the label fields to reflect the corresponding text in different languages. This is indeed a very cool idea. However, the reason why I am asking if it is possible to change the charset is because (do correct me if I am wrong)I need to display japanese and english characters and to do that I need to change the charset so that Web Dynpro can have them displayed properly. Is this assumption correct ?
      I have actually log a CSN ticket on this query as well and this is the reply "...... My understanding is that with Web Dynpro Java being based on Unicode, we don't need to charset settings. One should be able to display both Japanese and other characters in parallel, automatically, without problem."
      Your comments please. Thank you.
    from
    kw

  • In Lightroom 4, is it possible to change the resolution when exporting to Facebook?

    Is it possible to change the resolution when exporting a photo to Facebook using either the regular plugin or Jeffrey Friedl's plugin?  I can't seem to do it; I only have control over the image dimensions, not the resolution and the dimensions, as you can see in the screen shots below:
    I have control over both when I export to my hard drive (or a flash drive, etc.), as you can see below:
    I can't find the option to control the resolution when I try to export to Facebook.  Before I got Lightroom 4, I would create whole new low-resolution files of images I wanted to post online using Photoshop.  The image size settings I would use are a longest edge of 10 inches at 72ppi, and I would like to continue doing this.  If I can only set the longest side to 720 pixels (I can't even seem to set the longest edge to an inches value - I can only choose a pixels value) and not change the resolution from 300ppi to 72ppi, then my photos' longest edge will only be less than 3 inches long (right?).  Thus, I really want to be able to upload low-resolution photos to Facebook via Lightroom with the ability to change both the resolution and the image dimensions.  Any idea how to do it without having to export to my hard drive first?  Thanks!

    Rob Cole wrote:
    I'd be inclined to set it to zero so it obviously doesn't mean anything
    You can set it to whatever you like, and it makes no difference. Most of the time (depending on how you saved it), it will still open as "72".
    When you save an image for web, the resolution is usually stripped from the file. It's simply not there anymore. That's probably what happens in the Lr facebook module, and that's why there's no entry for it.
    But when you open that image somewhere else, that default of 72 ppi is assigned. Most apps need to know what to do with a file if asked to print it out. So there is a default, and that's usually 72, mostly by convention. With that default ppi, it prints out at a comparable size to what you see on screen at 1:1 display.
    And when people see that, they think "hey, web images are 72 ppi". But they're not - that figure is just inserted there by the opening application.

  • Difference between Change Authorization Data / Display Authorization Data

    Hello,
    My question is wrt to implementation of "principle of treble control" i.e three SAP administrators i.e.
    1. Authorization data administrator
    2. Authorization profile administrator
    3. User Administrator
    I have created a role & added a transaction to it e.g. "FAGLL03" or "FF67".
    No authorization data is displayed in the authorization tab unless I enter authorization tab with change button and provide inputs for org level field & generate profile. Even when I save the profile with the proposed name, it status still says "No authorization data exists". Since no authorization data is available, administrator 2 is unable to generate profile. If administrator 1 has to generate profile then why is administrator 2 required.
    Definition of Administrator 1 is:
    The authorization data administrator creates the roles, selects transactions and
    maintains the authorization data. He or she simply saves the data in the Profile
    Generator since he does not have the necessary authorization for generating the
    profile. He or she accepts the proposed profile name “T-...”. The authorization data
    administrator may not change users, nor generate profiles.
    Definition of Administrator 2 is:
    The authorization profile administrator starts transaction “SUPC” and chooses All
    Roles. He or she then restricts his selection, for example by entering the ID of the
    role to be edited. On the next screen, he or she chooses Display Profile to check
    the data. If all the data is correct, he or she generates the authorization profile. The
    authorization profile administrator may not change users, change the data for roles,
    nor generate profiles containing authorization objects beginning with S_USER*.
    Thanks.

    Hasan Saeed Khan wrote:
    Actually I started off my question with the "implementation of treble control" that SAP course AD940 suggests.
    I had never heard of this treble control and the added value of splitting rolebuilding and profile generation doesn't make much sense to me but that's my personal opinion.
    On the technical side of things: in your first post you state "No authorization data is displayed in the authorization tab unless I enter authorization tab with change button and provide inputs for org level field & generate profile."
    It is also possible to change the data and save this but not generate the profile yet. I just tried this by doing the following:
    Create role
    Add transactions to menu
    Edit profile, org levels & authroization data.
    Hit 'save'.
    Accept proposed profile name.
    Go back to PFCG main screen and ignore message of profile not being generated. (Click 'continue')
    And this leaves me with a role with yellow traffic light on the authorization tab an the profile status is: "Current version not generated"
    So it should be possible to maintain roles and profiles separately.

Maybe you are looking for

  • Vendor line item due date error

    I found the net due date in vendor line item report is not correct. vendor payment term is 30 days, accounting document posting date is Jan1. 2010,but net due date is Jan.1.2010, it should be 1.Feb,2010. why system calculate wrongly? Thanks

  • Changing measurements in page setup

    I don't know where else to inquire but, somehow my measurement of choice which had been inches has changed in my Photoshop print setup. It is now centimeters. I don't know how to change it. I'm using an Epson 14500 printer. Please help

  • How to customize attribute in root element?

    I'm using TSQL to generate an XML file from a SELECT query.  I'm 99% of the way to creating the precise format the client requires.  Here's the top portion of what I currently have: <Feed> <Interaction> <TransactionDate>2012-01-17T19:18:26.703</Trans

  • HELP! Lost Bulgarian Language on Nokia 3500 classi...

    When I update my phone's software my phone was with automatic language and it was English but when I go to the phone settings I saw that I haven't got Bulgarian Language. It wasn't a problem but now I want Bulgarian Language urgently. Please if enybo

  • Reader 8.1.2 update

    Using Windows XP SP2. Have Acrobat 6 standard installed. Had Reader 8.1.1 installed Auto update tried to update to Reader 8.1.2- install failed. Tried deleting Reader 8.1.1 and then reinstalling 8.1.2 - installation failed with error message:- Error1