Is the BELL a safe built-in?

Hi:
We recently migrated to Oracle Forms 10g. Our middle tier runs in Solaris 10 UNIX boxes. A couple of days I had a conversation with a friend of mine that dealt with issues after migrating to Forms and he categorically stated remove all BELL calls from you app - Remmember the application server does not have a bell. This is my friend so the following question does not even feel right: Should I give any value to his statement?
Boy, that felt dirty and just wrong.
Thanks,
Thomas

The BELL built-in can still be used in a web deployed forms, however it isn't really a useful function in a web form. It causes network traffic just to hear one simple ding. If you need audio alerts in a web form, you would be better served adding a Java bean to your form. At least you can be more creative than "ding".
That said, I recall there being some issues with it (BELL) in the base release, so be sure you are using latest releases. Version 10.1.2.2 is the latest Forms version.

Similar Messages

Removing the Bell Wire...

I have read on the internet that removing the bell wire can improve your broadband speed. All the guides on this are on the old sockets. I have a new filtered socket, I have taken the faceplate off and I can see that a wire is connected to terminal 3 which is where the ring wire is connected. If I remove this wire, is it safe and will it make any difference?
If my answer was helpful, please give me a star by clicking the star on the left hand side.
Thank you.

Here is a picture of it: http://www.google.co.uk/imgres?imgurl=http://ecx.images-amazon.com/images/I/51PWOlMK65L._SL500_.jpg&...
If my answer was helpful, please give me a star by clicking the star on the left hand side.
Thank you.

I tried to install latest OS update. Recd error installing. IT tried to load the upgrade in Safe Mode. Now system will not boot up. IT says I have to do a clean install which loses all data.

After receiving an error when I try to install the latest update of OS-X, I took my laptop to oour schools IT dept. They tried to run the update in safe mode and then they got an error saying the system could not find the hard drive. Now they want to run a clean install which loses 1000's of docs and pictures. I have Block I exams in med school next Monday and all of my notes and slides are on that hard drive.
The IT dept took the hard drive out and tried to back it up and they said they other computer could not connect or find my hard drive.
Major panic....
I have Norton antivirus and have never found any viruses on the system. I also have a program called ExamSoft which some other students here have noted they had similar crashes. Not sure if that is the issue...

Several take home messages here:
always back up before you update.
always back up anything you don't want to lose. Kind of like flossing. Only floss the teeth you don't want to lose.
Norton is very, very bad software, and you should get rid of it.
You don't need antivirus software on your mac. Antivirus software on macs causes more trouble than it is worth.
Your hard drive may be failing and thus may not be salvageable.
You could try booting into the recovery partition and seeing if you can repair your hard drive.
If that doesn't work, then there is a small chance that a third party utility (like Disk Warrior or TechTool) might be able to fix your drive (if it is not failing).
If that doesn't work, you may be able to send your drive and a lot of cash to a drive recovery service and see if they can get your files off it.
In the mean time, get notes and slides from a (smart) friend.

Connecting to an external display using the setting optimised for built in screen?

i am having trouble connecting to an external display with the lid closed and the settings is optimised for built in display.
it was working nicely until yesterday when i changed the resolution.
and now i cant take it to optimised for built in display, only if the lid is opened and i want it closed.
can i know how to return it to the setting (optimised for built in display) with the lid closed?

Hello there, hasan.
The following Knowledge Base article offers some great information for troubleshooting usig and external display with your Mac:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Error in Creating the Oracle Fail Safe Group during installation on MSCS

Hi All,
I am installing ECC 6 dual stack on MSCS.
I have done steps till CI installation as per installation guide.
I am gettig the following error in the step "Creating the Oracle fail safe group" while changing physical hostname into the virtual databse hostname using configtool in secure store parameter jdbc/pool/<SAPSID>Url as per the installation guide.
"Error occurred while working with configuration(scanning)
MSG:Error while connecting to the database"
I think it is not accepting the virtual hostname.
In our scenario CI is running CI node and DB instance is running on DB node.
I have followed the steps as per the installation guide.
Please let me know how to resolve this issue.
Database - Oracle 10g,OS is Windows server 2008 enterprse edition.
Regards,
Dinakar
Edited by: mutnuru dinakar on Jun 1, 2011 1:39 PM
Edited by: mutnuru dinakar on Jun 1, 2011 1:40 PM

Hi,
Thanks for your reply.
1) did you stop the CI before making the modifications as stated in the installation guide?
     Yes
2) is your database currently running on the same physical cluster node as your CI?
    No.Database instance is running on DB node and CI is on CI node.
3) is your database online?
     Yes,it is up and running
Please let me know if there is anyway to resolve this issue.
Regards,
Dinakar

I have a blue screen on mac pro 6.2. OSX 10.6.8. I got into the computer using safe mode. I beleive I need to restore using my install disc. How do I restore? Is there an internet address to look up how to restore?

I had a blue screen on my MacBook pro 6.2 with operating system OSX 10.6.8.
I got into the computer using safe mode but could open any applications. I think I need to restore with my install disc. How is this done? Is there a web address for instructions?

http://pondini.org/OSX/Combo.html
http://www.wikihow.com/Reinstall-Mac-OS-X-(Leopard-and-Earlier)
Mac OS X v10.6 Snow Leopard: How to Erase and Install - Apple Support

I have no sound when I go to my setting and try to pick an text alert? Also my volume buttons I mash them and it shows the bell but no bars bellow it.but when I get a text it works on and off?

After I up dated my phone my volume wouldn't work when I went into my settings to choose an alert. When I got a text message it would work some times and sometimes it would cut off half way and sometimes it would just vibrate. Also my up and down buttons on the. Side of the phone wouldn't work right either the bell would come up but no bars bellow it worked?

the sound works with music player and everything but just not when it rings or a message comes in
Yes! I have the same issue on iPhone 5 !!! Also need help. I tried to reset and restore from backup, nothing helps.

I have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume

i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

Can use the same thread safe variable in the different processes?

Hello,
Can use the same thread safe variable in the different processes? my application has a log file used to record some event, the log file will be accessed by the different process, is there any synchronous method to access the log file with CVI ?
David

Limiting concurrent access to shared resources can be better obtained by using locks: once created, the lock can be get by one requester at a time by calling CmtGetLock, the other being blocked in the same call until the lock is free. If you do not want to lock a process you can use CmtTryToGtLock instead.
Don't forget to discard locks when you have finished using them or at program end.
Alternatively you can PostDeferredCall a unique function (executed in the main thread) to write the log passing the apprpriate data to it.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Is it possible to change the compiler that is built into Sun Creator?

Is it possible to change the compiler that is built into Sun Creator?
I would like to compile my project to run under the JNI. I have tried to use the command line to run the javah -jni filenames but I always get errors and my assumption is that I need to change or adapt the IDE WITHOUT violating any licensing agreements to get the JNI working in this IDE.
I would appreciate any help that I could get in regards to this issue whther someone from SUN wants to comment or if any developer's have had this issue and have solved it...

Okay, I just tried this. I changed the default location of J2SE JDK in the creator conf file. Saved the file.
For example:
#netbeans_jdkhome="C:\Program Files\Sun\Creator2_1\java"
netbeans_jdkhome="C:\Program Files\Java\JDK1.5.0_04"
On restarting the IDE the new path is taken. To see the change: go to main menu -> Help -> About Java Studio Creator . Go to Detail tab. You will see the values for Java and Java Home changed as per your change in the creator.conf file.
Hope this helps.

How to fetch the SAP Standard Prog. built internal table into my_z_prog.?

Hi Experts,
Pls. let me know that,
How to fetch the SAP Standard Prog. built internal table into my_z_prog.?
For more explannation, pls. see my other thread with name of yestrday,
SUBMIT RFGLBALANCE WITH selection criteria, then How to get resulted itab?
thanq

Hi
Suppose RFGLBALANCE is your standard program and you have an internal table named I_RFGLBALANCE.
And lets say your Z program name is Z_SRINIVAS.
First find out the type of the internal table you want in your Z-program in the standard program. And declare an internal table of similar type in your Z-program.
I hope you can do this much.
Later wherever you are putting the below mentioned code.
SUBMIT RFGLBALANCE WITH selection criteria
Write the code which i have written.Obviously modify it to suit your requirement.
Please show what is not working fine so that even anyone else can help you with the problem you are facing.
Regards,
Mayank

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.When i start it the browser is not open and appears a message
Mozilla Crash Reporter
== Crash ID(s) ==
20100611143157
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)

the 20100611143157 is an update which won't instal automatically on my notebook

Suppressing the Bell in Oracle

Hi All,
I need to suppress the bell which sounds when Forms does a database interaction like insert/delete/update.
I am using Forms 4.5 (patch 10) and Oracle 8.0.5
Any ideas ?
Thanks in advance,
A

The alternates are
A.>
In the Oracle Forms 4.5 Designer, select Tools->Options then click on the
Runtime Options tab. Mark the Quiet Mode checkbox.
B.>
In the command line, set the Quiet keyword parameter to YES:
f45run form quiet=YES

RINGTONES : can't see the bells next to the songs

Okay i activated the Ringtones tab in the right column where you have the music,video,etc. tab... then the column with the bell in the view options... but i can't see any bells next to any of my songs or either the songs in the itunes stores. i reinstalled a bunch of times... anyone know the deal ?

am i the only one getting this?
i can't work with imovie like that its not useable like that at all

The project was not built since its build path is incomplete

Hi, Recently I port my project fro bea 8.1 to 10.2 & I am ubale to find following packages... workspace studio alos not able to find teh librraies contabing those files.
The project was not built since its build path is incomplete. Cannot find the class file for weblogic.management.ManagementException. Fix the build path then try building this project
The project was not built since its build path is incomplete. Cannot find the class file for weblogic.security.service.ResourceBase. Fix the build path then try building this project
com.bea.p13n.mbeans.MailServiceMBean
-KASH

It seems this occurs since the required jar files for building the files is not available in the IDE build path.
The build classpath is the path which is used to find classes that are referenced by your source code. During compilation, this path is used to search for classes outside of your project. As you know th build classpath can be specified for each project. In the project properties, it is referred to as the "Java Build Path Adding a JAR file to the build path : You can add a JAR file stored either in the workbench or anywhere in your file system to the build class path. To add a JAR to your build class path follow these steps: 1>>Select the project, and from its pop-up menu, select Properties. In the Properties dialog,select the Java Build Path page. 2>>Click the Libraries tab. You can now either add a JAR file which is contained in your workspace or which is somewhere else: to add a JAR file which is inside your workspace click the Add JARs button to add an external JAR file click the Add External JARs button.

Is the BELL a safe built-in?

Similar Messages

Maybe you are looking for