Is there an IDOC that be generated from a Goods Receipt?

My scenario is that I need to update a 3rd party system whenever we receive a part in the WH against a PO using MIGO. I'm wondering if there is an IDOC that can be triggered to send some sort of update when this occurs. I know about WMMBXY but it seems that this can only be used for inbound processing.
Just to be clear, I am not looking for an IDOC I can use to post a goods receipt.
Any suggestions? Thanks in advance.

using the IDOC type and Message type you can configure in the WE20. The Output type depends on your requirement. I am not sure which one you are using...?
WE01, WE02 etc..

Similar Messages

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

Is there a cable that will go from my hp psc 500 printer to a usb port on my computer.

Is there a cable that will go from my hp psc 500 printer to a usb port on my computer.
This question was solved.
View Solution.

Hi there dcjoe,
A lot of places carry the cables you are looking for. Though your area may vary I have found them in places like radioshack and wal-mart. Here is a google shopping link to get you started. Let us know if this helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Is there a way to stop email from sending read receipts?

Is there a way to stop email from sending read receipts?
Even though my setting in outlook 2010 is "never send read receipts".
Thank you.

as far as i understand iCal it is on the "receivers/subscribers" side to deal with email-updates (and not on the "senders/changers" side):
snippet from my Re: How do you stop receiving notifications about updated calendar events?:
to NOT get email notification about updated events from a shared calendar you subscribed to you have to uncheck "events affect availability" in that calendars "info" (mac os X.7 and X.8: iCal —> calendars dropdown —> right click on the subscribed calendar —> choose "get info" from the context-menu —> uncheck "events affect availability")

Is that possible to allow the Good Receipt on customized return Mvt Type

Hi All
Is that possible to allow the Good Receipt on Customized movement Type, Reference string for these movement type is 601
and these customize movement type has bee flagged for reveres movement type indicator under Internal Control and Under Update control consumption Posting is set as G "Planned consumption"
Thanks in advance

Hi There
As per the STD SAP,,
601 Goods issue for delivery (SD)
This movement cannot be entered manually. It is created automatically in SD using the function "Goods issue for delivery".
The quantity is taken from unrestricted-use stock.Possible special stock indicators: E, K, Q
You could have copied the 602 istead of 601,,
However if you are planning for the receipt (Returns from customer) you can use the Mov type-651,, if you want to have diff Acc assignments, you can copy this to Z movements,,
Hope it helps
Thanks
Senthil

The difference of jar files that were generated from wsdl

hello there:
I used maven's jaxws plugin to generate jar files from two wsdl links. The links are pretty much the same except for one line:
<wsdlsoap:address location="http://<env>.XXXXXX"the <env> indicate the environment is a prod or uat. Other than that, the wsdl is the same.
The question is, can the jars generated from respective wsdl be used interchangably? I did notice there a few bytes different from the resultant two jars, and the test shows they CAN'T be used interchangably.
Can anyone explain why?
Thanks,
Johnny

You may use them interchangeably if the code that uses the classes in the jar(s) does not depend on the default address of the web service but instead always passes the URL during initialization of such stub classes.

Is there an app that sends photos from iPad to specific folders on your computer?

Hello,
Sometimes I have screenshots of websites or other saved images on my iPad 2. What I do now is sync my iPad to my iMac once in a while and rename the photos on my computer, after which I place the photos in their respective folders. I was wondering if there's a way for me to transfer my photos from my iPad to specific folders on my iMac wirelessly. For example, if I have a picture of a flower on my iPad, could I transfer the photo wirelessly to my computer and have the photo put in a folder named "Flower" on my iMac?
Any help greatly appreciated. Thanks.

There are apps that allow you to select and transfer photos from your iPad to your computer via wifi, but I'm not aware of any that have that type of control over where they go to on your computer e.g. Simple Transfer (which also has a free lite version called Simple Photo & Video Transfer)

Account Assignment in an automatic PO created from a goods receipt idoc

Hi guys,
I'm doing a goods receipt via the IDOC MBGMCR that is automatically creating a PO. Is there a way to make the item on that PO using the account assignement "K" (Cost Center) ?
In the BAPI for the goods movement, they are calling the function module "ME_CREATE_PO_ITEM" to create/prepare the item. In that called, they defaulted the account assignement to space!!! I don't know how I can overwrite it. Is it possible via configuration ??
Many thanks,
Stéphane

Hi Stephen,
Did you find an answer to your query, i have the same question i want to default the account assignment 'K' for each item for a particular stock transport order.
I'm wondering if it can be configured or do i need to have ABAP do it.
your reply is greatly appreciated,
Thanks,
Michelle

Change unit cost AP Invoice line based from a Goods Receipt PO base entry

Hi,
Im using SAP B1 2007A PL 46 with B1DE 2.0
SCENARIO:
(1) I have a goods receipt PO that has a line for an item with a quantity but 0 unit cost.
(2) At a later stage, via DI, I create a AP Invoice and set the line BaseType, BaseEntry and BaseLine to point to the goods receipt from step 1.
REQUIREMENT:
When creating the AP INV, I would like to change the unit cost for the line to something other than 0. I find however, that because I have based the AP INV Line a base document, I cannot override the line price for the line before calling the APINV.Add() method. After calling the APINV.Add() method, the APINV Line still has the price of 0 even though I set it, for example, to 100. (see example below)
                    docAPInv.Lines.BaseType = (int)BoAPARDocumentTypes.bodt_PurchaseDeliveryNote;
                    docAPInv.Lines.BaseEntry = GoodsReceiptPODocEntry;
                    docAPInv.Lines.BaseLine = 0;
                    docAPInv.Lines.Price = 100; //NEW PRICE            SEEMS TO HAVE NO EFFECT
                int res = docAPInv.Add();
                if (res < 0)
                    Success = false;
                    ErrorReason = B1Connections.diCompany.GetLastErrorDescription();
                    break;

Hello,
If your system is installed as 2007 (no upgrade from 2004/2005)
-> use the UnitPrice instead of Price field.
If you have upgraded from 2005/2005 versions,
->You can choose between the UnitPrice and Price fields up to the Customizing settings.
See SAP Note 1334050
Regards,
J.

IDOC_INPUT_DESADV for IDOC input deliveries can post also good receipt?

Hello all:
Does any body can help me to know if idoc with Process code DESA that call function module IDOC_INPUT_DESADV besides creates an input delivery (like vl31n) can ALSO POST THE GOOD RECEIPT if the confirmation control key at item level is configure to auto post the GOOD RECEIPT?
Currently my idoc entry creates the delivery nevertheless the Good receipt is not posted. If manually on VL31N a delivery is created the Good receipt is posted automatically.
Thanks in advance!

Hi,
As long as you set the indicator of automatic GR process (select 2--Register and receive automatically), this applies both to the manual creation of inbound deliveries and to their creation via IDoc. If you still get the problem, you can check the assigned status in the inbound delivery on the tab page status overview, I think you can find some hint
Good luck
Z.T

Generating Alert after Goods Receipt is added.(SDK)

Hello,
I want to generate a alert for my accounts user after a Goods Receipt PO is added in SAP for a particular series. how can it be done? Please help.
Edited by: Rohanp on Dec 4, 2009 4:43 PM

Rohanp,
The SDK Help documentation for the Documents object (in your example a Goods Receipt PO) states ...
DI API Remark
The ApprovalTemplatesService doesn't trigger the approval process for objects that were added through the DI API.
For example:
A new Invoice that was added through DI API will not trigger the Approval Procedure Process.
Eddy

Filtering the XMLs that get generated from IDOC

Hi All,
I have requirement to filter the XML files those get generated when a BP relationship is created. The required configuration has been done. The XMLs are getting generated, but I want to generate the XML is only if it is Contact Person Relationship.
Can somebody tell me how I can achieve it?
Regards,
- Prasenjit

I am using an extended version of CRMXIF_PARTNER_REL_SAVE IDOC and in TCODE we21, I created an XML File port. Can we filter the IDOCs from which the XML will be generated, so that we can select the IDOCs we want to generate the XML from?
Regards,

Is there a cable that will go from lightning to usb to allow me to input video from a video camera?

Is there a lightning cable to usb that would allow me to input video from my HD video camera?

Note, that the video must be in a format understood by the iPad. Not all cameras produce videos in formats that the iPad can read.
Apple wrote:
Video formats supported: H.264 video up to 1080p, 60 frames per second, High Profile level 4.2 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
http://www.apple.com/ipad-air/specs/

Is there a case that could protect from spark or static electricity?

Technicians who work in the field and use the iPads are prone to spark and what not. Is there a case like the Otter Box which is durable and rugged but also protects from static shock? Thanks

You can figure out how to get to the apple support discussion communities but can't figure out how to use google to locate a case?
There are a bunch out there already. Zagg, ghost armor, switcheasy, ifrogz, etc...
Currently have a two peice ifrogz on my ip4 now but probably switching to a switcheasy when the nude ultra clear is available since I want something low profile. 99% my phone is the only thing in the pocket it is in so I don't want something bulky.
As for the bumper case. IMO it *****. have to take it off I think to use your sync cable or if you are going to use a dock of some type. Plus doesn't cover the back or anything. Definitely not a fan of the bumper at all. I would have thought apple would have come out with something better than that.

Is there a setting that prevents you from moving into the next "set?"

A couple times I have mistakenly hit my "next patch" button one too many and ended up in the next set. This is a problem because the backing track that was playing suddenly stops because I am in the next set, understandably.
Is there a setting or mapping that I can use so I can't enter the next set using the "next patch" button and only use the "next set" button.
Any ideas out there???
Thanks!!!!

Forget the physical controller button for a moment, that's a red herring.
I have a single button on the screen that for SOME PATCHES ONLY, has the action "Current Program Number" associated with it. In the "Map Parameter" area, there are two sliders for which you set values for "Button On" and Button Off". Those get set to the same value, which is the value of the patch to which you want to go next.
So suppose you have patch 1 and in that batch, the aforementioned button has its values set to 5, then if you press that button WHEN YOU ARE IN PATCH 1, then you will switch to patch 5. Now, further suppose that in patch 5, that same button has its values set for patch 12. Then pressing that button WHEN YOU ARE IN PATCH 5, will take you to patch 12.
Now, if you go into learn mode and associate that screen button with a physical controller button, then you can do exactly the same thing by pressing that physical button. The patch to which you will go will depend on which patch is currently active. If the last patch in that chain doesn't have any values associated with the button, then pressing that button (via your controller) will do nothing at all.
I suppose that if you're concerned with hitting that controller button by mistake, then you might actually want to have two buttons, one that takes you to the next patch in your chain, the other to the previous.

Is there an IDOC that be generated from a Goods Receipt?

Similar Messages

Maybe you are looking for