Is WebEx Enabled TelePresence supported with Expressway Core and Edge?

Is WebEx Enabled TelePresence supported with the Expressway Core and Edge instead of using a VCS Control and Expressway? This is one thing I'm not sure of, as the scheduled conferences will have to register to the Expressway Core and wasn't sure if this was possible.

Hi,
It is supported, see the following release notes here:
http://www.cisco.com/c/en/us/td/docs/telepresence/infrastructure/tms/release_note/cmr_hybrid_RNs_14_4.html#pgfId-164481
Expressway-E/C use is also covered in the deployment guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/config_guide/cmr_hybrid_config_guide_tms_14_4.pdf
-Jonathan
Edit - links

Similar Messages

HT4060 ' charging not supported with this accessory' and Not Charging at all

Help and advice please.
I am having problems getting the new IPad to charge at all and sometime it displays this message.
' charging not supported with this accessory'. This message is appearing occasionally on my 5 week old new iPad (3) within a few minutes of plugging it in. :( It is also not charging after this message appears. I am using the supplied wall socket and cable. I am also having problems getting the iPad to charge at all even if the message does not show. This is frustrating me no end. I expected a reliable device given the amount I paid.
I am so disappointed, frustrated and feeling some what angry.
I rang Apple support today (twice) and it made a liar of me working just fine for few minutes the first time then again failed, then for hour or so after the second call seemed to work just fine. Now it is not charging, and won't charge despite repeatedly unplugging and repluging, Switching off the iPad and turning it back on etc etc.
I am not happy at all!

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

TS2634 i have a ipad gen1 refurbished the wall usb charger keeps saying charging is not supported with this accesory and has taken 24 hrs to charge half the battery and this is a factory charger that uses the usb port whats wrong here help please

i just purchased a refurbished ipad gen 1 when i pluged in the wall charger with the usb cable a window came up and said (charging not supported with this accesory) the battry was almost dead so i pluged in the wall charger and
the battery has been charging for 24 hrs and is only 50%charged it is the factory use charger for this unit why does this error come up and why is it taking so long the software is up to date

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Location Appliance 2700 - is it supported with v7 WCS and WLC?

The compatibility matrix shows no support for a Location Appliance 2700 for any version 7.0.x.x for WCS and WLC. However, I did see a thread here where a v6.0.x.0 had compatibility. v6.0.202.0 is MD. Is it compatible with v7 WCS and WLC?
Can any of the experts please comment? Thank you.

Hi,
here is the link that will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/controller/4400/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp78062
Please dont forget to rate the usefull posts!!
Regards
Surendra

CUCM, VCS-Core and Edge, B2B Calling

I have CUCM ver 9.1(2) and VCS 8.1.1 in my environment, the VCS-C and VCS-E are currently setup to do MRA which is working fine for the vpn-less Jabber.
We also have a number of SX series Telepresence codecs dotted about which are registered to the CUCM and used for internal video conferencing, now the company is wanting the ability for outside video conferencing so need to setup the B2B capability (licencing has been sorted out already for Rich Media Sessions)
I've been ploughing through a number of docs on this, I have not found one yet specifically for CUCM registered devices and VCS doing nothing but firewall traversal, so the guides I've been working from are for enabling CUCM registered devices to talk to VCS registered devices and just taking relevant bits such as Neighbour zones and SIP trunks from it.
Does anyone know of a guide specifically for the direction Cisco appear to want us to go, which is Telepresence devices registered to CUCM and the VCS just doing firewall traversal.
Or a guide on the firewall traversal part only and I can tack it on to my notes from the other adapted guides.
My current notes have the following tasks I think I need to do to get this working
- setup partition and CSS on the CUCM for Telepresence calls
- setup SIP trunk on CUCM pointing to Expressway-C (have subnotes on requirments for SIP Trunk Security profile and the SIP Profile)
- SIP route pattern(s) on the CUCM pointing to the SIP trunk
- Enterprise parameters on the CUCM such as Cluster FQDN, Organization Top Level Domain and URI Lookup Policy
- On the VCS-C a neighbour zone pointing to the CUCM
- Search rule to route inbound calls to CUCM neighbour zone
Is this looking correct so far? If so then what else will I need to in relation to traversal zones and VCS-E call routing to get calls in and out the business?
thanks in advance
Tigre

Was checking the logs on the SX10 itself, appears to be reporting the same thing about 503 Service Unavailable, I had the logging on it set to "Extended Logging"
(NB - the address 10.1.99.198 in this case is not the SX10, it is my laptop as I was using the SX10's webgui to remotely control the device and make the call)
Currently discussing this issue with Cisco TAC, will update as and when more info comes
Line 1113: Sep 10 15:24:56.367 a9 appl[1529]: 6097.58 CuilApp   User admin(1001) about to execute command '/Phonebook/Search ContactType: any Limit: 100 Offset: 0 PhonebookType: local SearchString: [email protected]' from 10.1.99.198.
Line 1114: Sep 10 15:24:56.375 a9 appl[1529]: 6097.58 CuilApp   User admin(1001) about to execute command '/CallHistory/Recents DetailLevel: Full Limit: 100 Offset: 0 SearchString: [email protected]' from 10.1.99.198.
Line 1115: Sep 10 15:24:56.384 a9 appl[1529]: 6097.59 CuilApp   User admin(1001) about to execute command '/Phonebook/Search ContactType: any Limit: 100 Offset: 0 PhonebookType: corporate SearchString: [email protected]' from 10.1.99.198.
Line 1117: Sep 10 15:24:58.634 a9 appl[1529]: 6099.84 CuilApp   User admin(1001) about to execute command '/Dial callType: Video number: [email protected]' from 10.1.99.198.
Line 1125: Sep 10 15:24:59.154 a9 appl[1529]: 6100.36 MainEvents I: OutgoingCallInvoked(p=3) remoteURI='sip:[email protected]' localURI='sip:[email protected]' bookingID=''
Line 1164: Sep 10 15:24:59.859 a9 appl[1529]: 6101.07 MC I: CallParticipant: calledUri: sip:[email protected]
Line 1190: Sep 10 15:24:59.890 a9 appl[1529]: 6101.10 SipPacket   INVITE sip:[email protected] SIP/2.0
Line 1196: Sep 10 15:24:59.892 a9 appl[1529]: 6101.10 SipPacket   To: <sip:[email protected]>
Line 1295: Sep 10 15:24:59.960 a9 appl[1529]: 6101.17 SipPacket   To: <sip:[email protected]>
Line 1306: Sep 10 15:24:59.967 a9 appl[1529]: 6101.18 SipPacket   To: <sip:[email protected]>;tag=1393374~8642d04e-70cd-49a5-b73c-5ca5fe21b218-48171693
Line 1313: Sep 10 15:24:59.970 a9 appl[1529]: 6101.18 SipPacket   ACK sip:[email protected] SIP/2.0
Line 1318: Sep 10 15:24:59.972 a9 appl[1529]: 6101.18 SipPacket   To: <sip:[email protected]>;tag=1393374~8642d04e-70cd-49a5-b73c-5ca5fe21b218-48171693
Line 1328: Sep 10 15:24:59.979 a9 appl[1529]: 6101.19 MainEvents I: CallDisconnectRequested(p=3) remoteURI='sip:[email protected]' cause=[normal('') 'LocalDisconnect']
Line 1333: Sep 10 15:24:59.986 a9 appl[1529]: 6101.19 MainEvents I: CallDisconnected(p=3) remoteURI='sip:[email protected]' causeToLocal=[disconnected('Service Unavailable') 'RemoteDisconnect'] causeToRemote=[normal('') 'LocalDisconnect']

Problen with dual core and sound blaster audigy 2

HI.
Installing drivers for windows XP 32 or windows 64 in both cases when I play an MP3 file or playing any games when it starts i heard a terrible noise and after a few seconds sounds normal. The problem is basically at starting mp3 songs or any program even Excel. When I am listening a song and start a program like word the noise comes out.
When I was using this card with a pentium 4 2.6 GHz with an intel mother board 875PBZ never had such a problem and windows XP 32 bits.
I would appreciate any help on this matter. Actually I am using Windows x64 and i've downloaded your last version driver and still got the problem.
In my opinion should be some synchro problem in your driver with processor intel D830 clock.
please help me i dont know what to do.
my pc:
Pentium d 830 with d945gnt mothercard. 52mb ram and nvidia 6200 video card.

There was a recent thread posted regrding turning off of the cores during certain music ap
ps.
I'll try and find time to search for it later, and edit this thread with details.

We have basic phone with Prepaid Core and over $200 balance. If we upgrade to a smartphone with monthly bill, will the balance be transferred and applied?

We have a basic Verizon cell phone with a Prepaid Core Plan which has over $200 balance in account. We usually purchase $100 for minutes once a year for our phone (on limited income). If we upgrade to a Smart Phone, it looks like we will have to pay $45 a month. Will the balance in our prepaid account be applied to the new Smart Phone and pay the monthly charge for as long as there is a balance in the account? Thanks.

Paul_Diane,
We're excitd that you're considering a post paid account. I'll be happy to provide more information about the credit balance that you have. Once you move the account from prepaid to post paid the balance can't be moved to the post paid account. It will be refunded back to you.
VanetrisC_VZW
Follow us on Twitter @VZWSupport

After Effects CS5 rendering with 48 cores and 96 GB of RAM

My company is trying to put together some new machines for our render farm. Currently we are considering building a system with 4 12-core CPUs and 96 GB of RAM. Theoretically this would mean that After Effects could render 48 frames simultaneously, but I've never heard of anyone running AE on this many cores. Does anyone have any insight on whether or not this would work well?
TYAN S8812WGM3NR Quad Socket Motherboard, G.SKILL Ripjaws Series 4GB 240-Pin DDR3 1333 (x 24), AMD Opteron 6172 Magny-Cours 2.1GHz 12-Core Processor (x 4), Adobe Creative Suite 5

What kind(s) of source footage? What format are you rendering and exporting to? Tell us about your hard disk setup (since demands for reading source data and writing output will be high).
Start by extrapolating from the recommendations here. You need to make sure that you're not overscheduling your processors and starving processes of RAM.

IMac 27" i5: Bluetooth Enabler Driver Problem with Magic Mouse and Keyboard

So I just got my iMac 27" Quad Core i5 computer and was able to succesfully install Windows 7 64-bit (using this guide to get past the blank screen problem http://discussions.apple.com/thread.jspa?messageID=10533092). I then installed the Boot Camp 3 drivers from the Mac OS CD and updated windows via Windows Update. Everything seemed to work well.
I even had right click and scrolling capabilities with the MAGIC MOUSE! Also, all the keys were functional on the wireless keyboard.
However, after a few minutes of use the keyboard and mouse would hang and get stuck and I would have to do a hard reboot of the machine. I uninstalled the Apple Bluetooth drivers from the Add/Remove Programs menu and it fixed the problems with the devices getting stuck. However, function keys on the keyboard (brightness, volume, etc.) and scrolling in the Magic Mouse now not work. Is anyone else having this problem?

I found a solution, and everything now works! I followed step three in this discussion http://discussions.apple.com/thread.jspa?threadID=2221427&tstart=0 which says:
Disable power management for Bluetooth Radio. Open device manager, open Bluetooth Radios and right click on "Apple Bluetooth". Select the "Power Management". Uncheck "Allow the computer to turn off this device to save power".

Notebook returned from "HP Support" with dvr missing and will not power on

I had originally called in to support to ask them to help me stop the automatic update from Windoze 8 to Windoze 8.1 and to also shut off the reminder notices about that. Tech support supposedly walked me through that, but after that, the next time I booted up the notebook, it automatically updated to 8.1 anyway, and there was no way to stop it.
Shortly thereafter, the notebook could only boot to BIOS, or error code 3F0, but Windoze 8.1 had predictably self destructed and could no longer be found.
Which is also btw how I discovered that they had apparently also not installed the UEFI that they said was "installed on every laptop" blah blah blah...
By this time, I was out of warranty, but I was offered a service "deal" that seemed to make sense for the cost v.time to do it myself factor, so I took them up on it.   But I was told that if the hard drive needed to be replaced, they would not return my old hd to me, so I first had a local tech attempt data recovery on that. He didn't have time, and couldn't get it done, and asked me to try to get the hd back anyway. He also checked out some basic connections inside and stuff, to see if there was something obvious and easy he could fix.
But he also told me that a) there was a brown concrete hardened paste like substance on the back of the keyboard that would not clean off, he thought it was either some sort of plastic glue or thermal paste that had baked. and b) 99.9% of all manufacturer "technicians" will declare "liquid damage" (or some other fault of the user) and he thought I was wasting my time to send it in and they would not perform the repair.   We even bet lunch on that. BUT... I was to pay for this repair, so I decided to send it in anyway. And... he took pictures of certain things to help me if they did as he said they would.
Then, just as my local technician predicted, the notebook came back today from HP's generous service offer, not only NOT fixed, but also no longer powers up at all and no longer even has a DVR, and covered in what looks like white plaster dust. Oh and without the recovery media. I haven't opened it up to see what else is missing, but I am furious that they sent it back in worse condition.   I don't know how HP will remedy this, but I can promise you that my personal remedy will not be to purchase a new HP notebook PC. Ever.

lol. I did get a PM from support person asking for my serial number and stuff, and after I responded, I got this reponse:
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your image was rejected because it does not relate to any HP Support Forum Question or it may have contained personal information (serial # visible in image). From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
Sharing serial numbers or product keys, personal email addresses, telephone numbers, and last names is not allowed for your safety.
Please remove or otherwise hide any serial numbers and then repost your image.
Thank you
So. It seems to me that HP employed people should KNOW THIS when they ask for this information this way! For the 4th(?) time... I would like to know how HP plans to actually RESOLVE the issue, since we can't seem to get beyond basic introductions?

Support with Windows 10 and Poker Software

Hi, I am a poker player and have recently upgraded to windows 10 - my poker software has worked perfectly for years. Last night i finally managed to upgrade to windows 10. Once the upgrade was finished,however, i am now unable to log into my poker software. This screenshot displays the issue http://prntscr.com/7zfs5o The log in screen usually has a place to log in but in this instance it is completely grey and has no writing? Also, I have found that my scrolling pad does not work, and that the option is unticked in my settings. This is annoying as whenever i restart my computer, I have to also reselect this option My computer is a HP Pavilion Notebook - 17-f107na and was previously running windows 8 I have trouble shooted the software on the HP website, and havent found any issues Please help!

I've also updated my BIOS and still no luck - anyone?

Configuring Lync 2010 Mobility with Front end and Edge Server

I have been racking my brain the past week trying to figure out how to get the lync edge server working properly and how to get the mobility service working properly.
Currently I have 1 front end server that is configured and working. I have one edge server that has been configured according to nearly every online help I could find along with public CERT.
If I use microsoft's online connectivity test and I run the test for
Lync Server Remote Connectivity Test everything passes. I am also able to connect to lync using a windows lync client from outside of the internal network however I have to specify the server name as being sip.ourdomain.com I cannot get connected using
autodiscover.
When I run the Lync Autodiscover Web Service Remote Connectivity Test it fails due to SSL error to lyncdiscover.ourdomain.com which then lead me down the path that I needed to install
the Mobility service but it also tells me that I may need to update our SSL cert as well.
This is where I am getting confused and would like to be pointed in the correct direction.
When I installed mobility service on the front end server it created the autodiscover section in IIS. If I am inside our network I can browse to it without any issue. Where I am confused at this point is how to either setup DNS or how to configure
the edge server to use autodiscover.
Do I need to setup an additional public IP and point lyncdiscover.ourdomain.com to the IP of our front end server or to our edge server? If I have to point this to our front end server then that would mean that I use one public IP that goes to 443,
444 and 5061 for our edge server and then I would need one public IP that goes to ports 443 and 80 that get redirected to ports 4443 and 8080 on our front end server? If that is the case then do I have to get an external cert for the front end server
that contains lyncdiscover or can clients connect if it is just using the self signed cert from the domain?
This is where I am getting confused at and hopefully some nice folks out there can clarify this for me so I can get this resolved.
Thank you
KK

You need an additional public IP to point to a reverse proxy, which will listen on port 443 and proxy requests to your front end server on port 4443 (notice the extra 4). You can use IIS ARR, Web Application Proxy, or whatever else you may have for
this purpose, but you need to ensure you redirect port 443 to port 4443. This reverse proxy cannot be collocated on your front end server or edge, you'll need a separate box or appliance.
Beyond Lyncdiscover, you'll want to do this for your external web services FQDN as defined in the topology builder and your meet and dialin URLs too. You'll want a third part cert for all of this (though it doesn't need to be installed on the front
end, just the reverse proxy) so that you don't need to install any internally signed root certs on anyone's smartphone.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Level of ACPI support with Solaris 10?

What is the current level of ACPI support with Solaris 10 x86? I have been searching forums and Sun documentation and I have not found an official answer to this question from Sun. I have seen posts in which people state what they "think" they know or they know how something worked with "their" system but nothing official from Sun. I assume there is some support for ACPI because the eeprom command can be used with the acpi-user-options. Can I just enable ACPI support on my motherboard and let Solaris 10 Update 3 do the rest? Thanks for the help?

I found this site that seams to answer this question.
http://blogs.oracle.com/jsavit/entry/ours_goes_to_11_features

Opportunities are not supported with SAP Business One 2005A SP0 and SP1??

In SBO Note 973962 says that opportunities are not supported with 2005A sp0 and SP1.
When running 5.9.7 I can sync opportunities.
So does anyone know what is and what is not supported in this version for Opportunities?
Thanks,
Eric Rasenberg

Full functionality is not shared nor synchronized between systems for opportunities in 5.9.x

Best way to set up motion 5 with multiple cores

I am a novice in this area so bear with me.
I recently purchased a Mac Pro with 8 Core and 24 GB of RAM as I'm doing a lot of video rendering for my video lectures. I use motion 5 to chromakey the greenscreen background on my talking head video. Most of my videos are 1 - 2 hours in length. Prior to the mac pro it took my mac book pro 26 hours to do the chromakey rendering. Now with the Mac Pro it is about 10 hours to render 1 hour of video but I'm wondering if there are any settings I could tweak to get it to render even faster.
I have a two hard drives - one is the solid state and the other is a "regular" harddrive (forgot the name). The OS and motion 5 are installed on the solid state drive.
Here are my system particulars:
Processor 2 x 2.4 GHz Quad-Core Intel Xeon
Memory 24 GB 1066 MHz DDR3 ECC
Graphics ATI Radeon HD 5770 1024 MB
Software Mac OS X Lion 10.7.3 (11D50d)
I capture my video using screenflow and then export just the talking head video with the greenscreen and pull that into motion 5 and chromakey the greenscreen. I then export/share the file as 444.
Here is a screenshot of my activity monitor while it is rendering a greenscreen video.
http://www.screencast.com/t/gkC3u6CbyeCZ
It seems it can use more memory etc. but doesn't. That is where I'm thinking there is something I can do to make it use the resources available.
I am open to any suggestions and appreciate the help.
--Laureen

Hi Mark,
Thanks for the reply.
FCP cost's $300 - do I really need that if Motion 5 does the same thing? If it gets my render speed down significantly I'm willing but I won't be using it for anything else - I just want to make sure I get a good return on my investment.
And "compressor" is that a part of FCP or another program to purchase?

Is WebEx Enabled TelePresence supported with Expressway Core and Edge?

Similar Messages

Maybe you are looking for