Location Appliance 2700 - is it supported with v7 WCS and WLC?

The compatibility matrix shows no support for a Location Appliance 2700 for any version 7.0.x.x for WCS and WLC. However, I did see a thread here where a v6.0.x.0 had compatibility. v6.0.202.0 is MD. Is it compatible with v7 WCS and WLC?
Can any of the experts please comment? Thank you.

Hi,
here is the link that will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/controller/4400/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp78062
Please dont forget to rate the usefull posts!!
Regards
Surendra

Similar Messages

Rogue AP - Not in sync with WCS and WLC

WCS - 7.0.164.0 and WLC - 7.0.98.0.
For some reason, I am seeing rogue ap alert on WLC and am not seeing on WCS. How do I clean up database and sync with WCS and WLC.
I am seeing same thing with coverage holes.
- Allen -

Allen,
On the WLC go to Management > SNMP > Trap Controls, make sure that you have the traps checked.
HTH,
Steve
*Please remember to rate helpful posts*

Location Appliance 2700 - Defect Harddisk

Hi everyone,
my customer owns a 2700 Wireless Location Appliance.
The Harddisk of the Appliance is broken and my customer replaced the defect with a new one.
This new Harddisk comes from a local hardware dealer and has no Operating System installed.
Is there something like a Rescue CD for WLSE?? Or any other Desaster Recovery mechanism??
What shall we do to get this appliance back to working condition?
Many thanks in advance.
Frank

Hi,
here is the link that will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/controller/4400/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp78062
Please dont forget to rate the usefull posts!!
Regards
Surendra

Location Appliance 2700 Password Recovery

Hi All-
Inherited 2700 Location Appliance, but not the credentials to login. I have attempted the recovery per Cisco document 82161. The actual appliance boot steps don't seem to match the document. I'm pressing 'Esc' to crash out of the boot sequence to no avail. Any ideas?
Thanks.

Hi,
here is the link that will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/controller/4400/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp78062
Please dont forget to rate the usefull posts!!
Regards
Surendra

Is WebEx Enabled TelePresence supported with Expressway Core and Edge?

Is WebEx Enabled TelePresence supported with the Expressway Core and Edge instead of using a VCS Control and Expressway? This is one thing I'm not sure of, as the scheduled conferences will have to register to the Expressway Core and wasn't sure if this was possible.

Hi,
It is supported, see the following release notes here:
http://www.cisco.com/c/en/us/td/docs/telepresence/infrastructure/tms/release_note/cmr_hybrid_RNs_14_4.html#pgfId-164481
Expressway-E/C use is also covered in the deployment guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/config_guide/cmr_hybrid_config_guide_tms_14_4.pdf
-Jonathan
Edit - links

HT4060 ' charging not supported with this accessory' and Not Charging at all

Help and advice please.
I am having problems getting the new IPad to charge at all and sometime it displays this message.
' charging not supported with this accessory'. This message is appearing occasionally on my 5 week old new iPad (3) within a few minutes of plugging it in. :( It is also not charging after this message appears. I am using the supplied wall socket and cable. I am also having problems getting the iPad to charge at all even if the message does not show. This is frustrating me no end. I expected a reliable device given the amount I paid.
I am so disappointed, frustrated and feeling some what angry.
I rang Apple support today (twice) and it made a liar of me working just fine for few minutes the first time then again failed, then for hour or so after the second call seemed to work just fine. Now it is not charging, and won't charge despite repeatedly unplugging and repluging, Switching off the iPad and turning it back on etc etc.
I am not happy at all!

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

TS2634 i have a ipad gen1 refurbished the wall usb charger keeps saying charging is not supported with this accesory and has taken 24 hrs to charge half the battery and this is a factory charger that uses the usb port whats wrong here help please

i just purchased a refurbished ipad gen 1 when i pluged in the wall charger with the usb cable a window came up and said (charging not supported with this accesory) the battry was almost dead so i pluged in the wall charger and
the battery has been charging for 24 hrs and is only 50%charged it is the factory use charger for this unit why does this error come up and why is it taking so long the software is up to date

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Margin error: Cisco Wireless Location Appliance 2700

Hi !
I'm looking for information about the error margin in the triangulation process for the WLA 2700 Localization service.
Regards
Rafa

3 meters

Notebook returned from "HP Support" with dvr missing and will not power on

I had originally called in to support to ask them to help me stop the automatic update from Windoze 8 to Windoze 8.1 and to also shut off the reminder notices about that. Tech support supposedly walked me through that, but after that, the next time I booted up the notebook, it automatically updated to 8.1 anyway, and there was no way to stop it.
Shortly thereafter, the notebook could only boot to BIOS, or error code 3F0, but Windoze 8.1 had predictably self destructed and could no longer be found.
Which is also btw how I discovered that they had apparently also not installed the UEFI that they said was "installed on every laptop" blah blah blah...
By this time, I was out of warranty, but I was offered a service "deal" that seemed to make sense for the cost v.time to do it myself factor, so I took them up on it.   But I was told that if the hard drive needed to be replaced, they would not return my old hd to me, so I first had a local tech attempt data recovery on that. He didn't have time, and couldn't get it done, and asked me to try to get the hd back anyway. He also checked out some basic connections inside and stuff, to see if there was something obvious and easy he could fix.
But he also told me that a) there was a brown concrete hardened paste like substance on the back of the keyboard that would not clean off, he thought it was either some sort of plastic glue or thermal paste that had baked. and b) 99.9% of all manufacturer "technicians" will declare "liquid damage" (or some other fault of the user) and he thought I was wasting my time to send it in and they would not perform the repair.   We even bet lunch on that. BUT... I was to pay for this repair, so I decided to send it in anyway. And... he took pictures of certain things to help me if they did as he said they would.
Then, just as my local technician predicted, the notebook came back today from HP's generous service offer, not only NOT fixed, but also no longer powers up at all and no longer even has a DVR, and covered in what looks like white plaster dust. Oh and without the recovery media. I haven't opened it up to see what else is missing, but I am furious that they sent it back in worse condition.   I don't know how HP will remedy this, but I can promise you that my personal remedy will not be to purchase a new HP notebook PC. Ever.

lol. I did get a PM from support person asking for my serial number and stuff, and after I responded, I got this reponse:
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your image was rejected because it does not relate to any HP Support Forum Question or it may have contained personal information (serial # visible in image). From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
Sharing serial numbers or product keys, personal email addresses, telephone numbers, and last names is not allowed for your safety.
Please remove or otherwise hide any serial numbers and then repost your image.
Thank you
So. It seems to me that HP employed people should KNOW THIS when they ask for this information this way! For the 4th(?) time... I would like to know how HP plans to actually RESOLVE the issue, since we can't seem to get beyond basic introductions?

Support with Windows 10 and Poker Software

Hi, I am a poker player and have recently upgraded to windows 10 - my poker software has worked perfectly for years. Last night i finally managed to upgrade to windows 10. Once the upgrade was finished,however, i am now unable to log into my poker software. This screenshot displays the issue http://prntscr.com/7zfs5o The log in screen usually has a place to log in but in this instance it is completely grey and has no writing? Also, I have found that my scrolling pad does not work, and that the option is unticked in my settings. This is annoying as whenever i restart my computer, I have to also reselect this option My computer is a HP Pavilion Notebook - 17-f107na and was previously running windows 8 I have trouble shooted the software on the HP website, and havent found any issues Please help!

I've also updated my BIOS and still no luck - anyone?

License problem with WCS and WLC

Hi All,
I have planned to implement three WLCs and one WCS to manage them.
AP count is as below :-
     WLC #1     -     10 AP
     WLC #2     -     10 AP
     WLC #3     -     20 AP
When WLC #1 is down that connected 10 APs should failover to the WLC #3.
So at normal scenarion, WLC #3 should need 30 AP license; to failover WLC#1 APs properly to the WLC #3
My problem is, Can I load total AP license (40 license) to WCS without installing them to individual WLCs ?
If it is possible i can cut off the additional 10 AP license, required to the HA and failover.
or if I use a WCS may i need to buy additional 40 license to WCS seperately from 40 WLC license ?
Thanks,
Charith

Yes, you required to have seperate licences for WLC & WCS.
You cannot add WLC licence to WCS & vice versa.
HTH
Rasika

WLC upgrade to 7.0.98.0, WCS & Location Appliance to upgrade - Building maps location

Hi,
We recently upgraded about 24 WLCs (4402s and 5508s) from 6.x to 7.0.98.0. In order to support these WLCs through WCS, we also need to upgrade the WCS to 7.0.164 which is currently running at 6.0.132.0 (Linux OS). Same is the case with Wireless Location Appliance 2700 to be upgraded as well. Wireless Management system has number of building maps with AP locations.
Prior to upgrade the WCS / Location appliance we need to take the backup of these building maps, already stored to export after the upgrade. Kindly let us know the directory where all these maps are being stored, as during upgrade we will loose all the stored data / maps.
Thanks for your kind assistance.
Regards.
Shuja

Hi Shuja:
Who says you're going to lose all your maps and stored data during a WCS upgrade? The installer for WCS 7.0.164.0 will see the 6.0.132.0 installation and upgrade it in place, modifying the existing data to work in the new 7.0 format. The installer for WCS 7.0.164.0 will even ask you if you want to make a backup of this data before the upgrade process even starts, although it would be a good idea to pull a backup of everything before you start. (One can never have too many backups, right?) The backup application in your existing install should be at /opt/WCS6.0.132.0/backup . Run that application and it will prompt you for a location to put the .nmsbackup file.
The .nmsbackup file that results from a WCS backup is what gives WCS its portability across platforms (physical/virtual) and operating systems (Windows/Linux). It's essentially the lifeboat of WCS, containing the database, the maps, the licenses and other supporting files.
Performing Maintenance Operations chapter of the WCS Configuration Guide:
http://tools.cisco.com/squish/08725
Sincerely,
Rollin Kibbe
Network Management Systems Team

Location Appliance Help required

Hello,
I have a WCS,WLC and LOC deployed. The integration betwen the WLC and WCS is working perfectly. We didn't put a lot of access points in the deployment because we didn't need acurate location tracking but at least we need some.
The problem is the location appliance is not able to pull any information about the connected clients. No clients shows on the map eventhough the APs report connected clients.
One issue I had is when I try to synchronize the network design with the location appliance I get the below error:
"Element found and will be pulled to WCS".
I appreciate any help with issue as it is quite urgent,
Regards,

Hello Sabhasin,
The message I was receiving above was due to time difference between the location appliance and WLC. Now all systems are using an NTP server and in sych.
As for the location on the map I was able to point the problem to the following:
If you delete the location from the WCS and add it again and then go to the MAP you can see the clients and the rogue stuff within a two minutes time range. When the two minutes pass you no more able to see the last two minutes info from the location.
If you choose the past 5 minutes then you see the information on the map. When 3 more minutes pass you no more see anything for the last 5 minutes data.
If you choose 15 minutes after 10 minutes pass you no more see anything on the map.
If you delete the location appliance and add it again you will be able to see the information again starting with two minutes and again same pattern.
Therefore, the issue is that the info is pulled from the location once you add it and after that nothing is pulled.
I tried synchronizing all the servers and no luck,
I appreciate your response,
Regards,

Wireless Location Appliance

Hi,
We have a central WCS server. One of our remote offices has purchased the 2710 wireless location appliance and 2 WLC's
Where is the best place to situate the appliance? In the remote site with the WLCs or centrally with WCS?
In addition we have purchased WCS licenses with "location" for all our other AP's. So we would like to utilise their 2710 for other WLAN's at other remote sites. (However, they (the remote site) should be the primary beneficiary). Does this affect the location of the appliance?
Appreciate your help,
Andy

I really don't think it matters where the location appliance is. However, since it is WCS that is sending the information to the Location Appliance for processing, it would probably be more logical for the location appliance to be located with the WCS server. I'm sure from a bandwidth perspective, the best option is to keep the two devices in close proximity.
I can't really think of a situation where you would even need to "prioritize" the benefits of the location appliance. Expect from an installation perspective, focusing more on the remote site before adding the others systems.

Wireless Location Appliance to Nexus

Hi dear,
I have a question about our wireless location appliance 2700, I want to connect it in dual attachment to our two nexus 2000 as all of other servers/appliance, I didn’t find any doc about this, could someone help me for that, if it’s possible or not and if yes how can I do that.?
Thanks in advance

There are two kinds of RFID tags: Active tags, which have a battery or other internal power source, and passive tags, which have no power source and work by reflecting the energy from an RFID scanner (basically). At the energy levels and distances used for WiFi location detection, passive tags will not return a detectable signal.
Take a look at http://www.aeroscout.com/ for more info on WiFi RFID tagging.

Location Appliance 2700 - is it supported with v7 WCS and WLC?

Similar Messages

Maybe you are looking for