Issue adding Query to My Menu

I am trying to add a Query to a user's My Menu and I get an error
The procedure I am using to add the Query is
1) Open Query Manager
2) Select the query I want to add to the menu
3) Go to Tools > My Menu > Add to My Menu > Highlight the Folder I want to add the select to > CLick Add button
Too Many FIelds (QE -3018) [ message 300-19]
Then the Add My Menu the Add button changes to an Update button, but noting can be added to th emenu
I use this same porocedure to on another company on the system and there is no problem
Has anybody had this problem before and if so how did you resolve it?
Thanks in advance!!
Dana

You may check these threads first:
Too many fields (QE - 3018)
Too many fields - QE -3018
Error : Too many fields (QE -3018)
Thanks,
Gordon

Similar Messages

Adding Query to My Menu

Hi,
In the My Menu tab of Main Menu there is a Query category. How to create a shortcut to query in the My Menu ?
Thanks B4

Hi,
If you open up Query Manager.
Tools / Queries / Query Manager
Then Select the Query you want so its highlighted in Yellow (you don't have to run it, just make sure its selected.)
Then select Tools / My Menu / Add To My Menu.
You can then select the Queries folder and add the query to your My Menu.
Regards,
Adrian

View Link Editor Issue - empty query clause if based on association

JDeveloper 10.1.2
Setup:
- entities A and B
- a 1 to * association from entity A to entity B (A_B_association)
- a view of A based on entity A (AView)
- a view of B based on entity B (BView)
- BView has an expert mode query
Create a view link from table A to table B:
- choose the A_B_association under AView for the source attribute
- choose the A_B_association under BView for the destination attribute
- click add
- click next
issue: the query clause is empty
- click next:
info dialog pops up;
title = "Business Components"
message = "Restoring the default where clause."
Note, however, that creating a view link based on the attributes works. That is, if I choose the primary key attribute under AView for the source attribute, and the corresponding foreign key attribute under BView for the destination attribute, then the wizard generates the expected query clause.
If I create a new project and recreate the entities, the views, and the association, then I can successfully create a view link based on the association. The foreignKey value on the association end was different in the new association XML file. I modifed the old XML file so that it used the same foreignKey element, but that did not seem to work.
I am guessing that this is some sort of user error on my part or that we have otherwise managed to squat up our XML files.
Any tips, hints, or ideas appreciated.
Thanks,
Steve

The problem is in AView.
We had modified the AView at one point, then reverted it to a default view of entity A. Here, "a default view" means that we undid our custom changes (apparently not thoroughly enough); that is, we did not delete it and create a default view from scratch using the contextual menu on the A entity.
The bottom line is that the AView attributes were not being mapped to the entity -- they were showing up as calculated attributes.
We created a "New Default View Object..." from the contextual menu of entity A, then manually corrected the AView.xml file to solve the problem.

QueryString issues with Query Builder and Search Box

Hi Guys,
I've got the following scenario (Issues are bolded for quicker reading):
I have a search results pages named results.aspx
I have a page, named messages.aspx, with a webpart that display messages from a specific folder (which can be changed in the webpart properties). On that page, there's a search box which will lead to results.aspx, and will do search only on the specific
folder.
On the other hand, when I'm using Content Search Web Part, I can use the query builder to do the following:
ParentLink:{QueryString.folder}
So all I have left to do is to send the folder as a query string parameter from messages.aspx to results.aspx.
(1) The search box doesn't support sending other QueryString parameters,
which is also known to happen in previous SP versions, so I fixed the onclick events and voila, the folder parameter is transferred to results.aspx.
But something weird happens in results.aspx:
When I'm first redirected from messagses.aspx to results.aspx I get the follwing URL:
/Pages/results.aspx?k=Washington&folder=Home - I've got results
When another query is issued from the search box of results.aspx I'm getting the folliwing URL:
/Pages/results.aspx?k=Washington&folder=Home#k=Indiana - I've got NO results.
Same with paging:
/Pages/results.aspx?k=Washington&folder=Home#s=11
(2) When a QueryString parameter is present in the results.aspx page, and than another query (different keywords, paging or anything) is issued using AJAX and hashtags - no results are returned.
My guess is a client side issue: When the a new query is issued, adding a hashtag (#) to the URL, it ignores the QueryString parameter currently present in the URL, and thus the server doesn't recieve it in the query packet/http post xml, which creates a
valid query with no results, in my case: ParentLink:"", which I manually checked and does yield no results.
I've also tried the following with no help:
/Pages/results.aspx#k=Washington#folder=Home - no results. my guess is that folder is now not a QueryString
/Pages/results.aspx?folder=Home#k=Washington - No results.
/Pages/results.aspx#k=Washington&folder=Home - The query text issued was "Washington&folder=Home" - no results of course.
Any ideas any one?
Amir

Hi Amir,
after some months I found a workaround that solves this issue: just add & after your query string value, it will separate your parameter value from other strings that may be added by sharepoint controls.
ie:
if your page is http://spsite/page.aspx?param=value
just call it like this http://spsite/page.aspx?param=value&
It works!
Ciao
Fabio

Change Query Global Definition Menu

Hi All,
             I seem to be having trouble entering the 'change query - global definition' menu. The error message is as follows:
"This component was edited with a more recent version of the Editor.You also have to use the more recent version to Edit Further.Further processing not possible.Update your front End."I am working in BW3.5.
                      Is this issue related to any configuration problem?Please help me on this.
Thanks in advance,
Drisya

Hi
       If u migrate the query of the 3.5 version to 7.0 version u ca only do the edition for that query in 7.0 only,u cannot edit that one in 3.5,but only u can open

Issue In query output

Hello Gurus,
I am having an issue with query output.Please find below the details of it
Unsold claims: Total---> 200
Dispatch: Total--->118,086
Unsold claims/dispatch--->0.001694
This should be the output but its coming --.0033120 because itu2019s dividing with max value in dispatch which is 60,386.
Reason: The aggregation property of Dispatch is max value. I am not supposed to do any changes in Modeling. So can we do any thing at reporting level to get the desired output?
Desired output---->0.001694
Output coming---->.0033120
Please help me in getting the desired output at query level.
Regards,

solved with the help of nested exception aggregation

Report Not apperaing in User's Query Report Viewer Menu

Hello There!
Continuing with below thread
Report Category not Appearing in Report Definition
When i search for a report i created, i'm(as a normal user) not able to find any report after searching.(assigned to me or to my role.)
The view PSXPRPTSRCH_VW has two tables PSXPRPTDEFN and PSXPDATASRC .Both have oprid column which is blank and the above view's first where clause is asking for oprid.
I don't understand how then all the doc./papers on internet i read, to create Report using XML Publisher says/shows the report appears in user menu(query report viewer). May be they still using PS login to show the output?
Anybody have any idea where am going wrong?
The category,datasource,Definition,query tree all set properly. Do user need any special role/permission assigned?
BTW user can see the query report viewer menu.
Regards!
Edited by: user10569054 on Sep 27, 2012 2:32 PM
Peoplesoft Version 9.00
Database Oracle 10.2

Thanks for the Reply.
from the doc. you gave, this is what i found.
Home > PeopleBooks > PeopleTools 8.52: BI Publisher for PeopleSoft > Running, Locating, and Viewing BI Publisher Reports
The Query Report Viewer allows selection and online viewing of those reports that have a data source type of PeopleSoft Query. Existing Query security applies so that each user has access to run only the reports to which he or she has qualified Query access to the data source.
The PS query and the data source is created by user PS then how can a normal user will have access to that?
I'm bit confused here.
Regards!

Add query to Main menu in SAP 2007

Hi all!
Can i add query to main menu in SAP 2007. Now, i only add done query to My menu.
Thank you!

Hi Tien,
You cannot add the Query to the main menu.you can try the other way round. Paste the query in the crystal report and then check the report is comming OK. Then add it to the main menu via crystal Reports.
Regards,
Raj

Need Query to get Menu's - SubMenu's and Functions attached to a Responsibi

Hi,
Need SQL Query to get Menu's - SubMenu's and Functions attached to a Responsibility...
There are two tables fnd_menus_vl and fnd_menu_entries_vl....
I need to call in these two tables again as the sub_menu_id acts as menu_id in order to get the submenu and their entries....
Please suggest how to achieve this...
Thanks
Aman

Hi Aman,
>
Need SQL Query to get Menu's - SubMenu's and Functions attached to a Responsibility...
There are two tables fnd_menus_vl and fnd_menu_entries_vl....
I need to call in these two tables again as the sub_menu_id acts as menu_id in order to get the submenu and their entries....
Please suggest how to achieve this...please see this
SQL Query to find menus and submenus attached to responsibility
Re: How to check a function is accessible under responsibility?
;) AppsMasti :)
sharing is Caring

Execute Query from SAP Menu with Analyzer

Hi.
I have created a menu for users. This menu contains links to queries that are opened with Internet Explorer.
Now, i want to have another link but instead of opening it with Internet Explorer, i want to open them with Analyzer.
Is possible to launch a query trough SAP Menu link in Analyzer? User will not need to open it trough 'Folder + Open Query ..'
Kind regards,
Inigo.

Here are couple of directions:
1. Create a local workbook which has embedded query. Store this workbook on a remote server or BI/FTP and create a link from it. But once this link is clicked, that workbook will be downloaded and user will have to login again in BEx analyzer.
2. If we can call transaction "RRMX" from web, it will eliminate problem of relogin.
3. Launching BExAnalyzer.exe file from web should launch analyzer automatically. Check whether this file accepts any parameters like open dialogue or query name??
Hope something helps..
Abhijeet

Spry Tabbed Pannels issue: adding new divs disrupting widget

I am having issues adding divs to the existing html framework of the .TabbedPannel div. Once I add additional divs, the content for each individual tab is displayed in one long pannel. I think once I added the new divs, the javascript was messed up. I'm a newb when it comes to javascript. does someone have advice for this issue?
Note, once I added the ".b" ".l" ".r" class divs, the pannels got all messed up.

Hi,
As you are already aware, this is where it goes wrong:
       <div class="TabbedPanelsContentGroup" >
        <div class="b"><div class="l"><div class="r">
         <div class="TabbedPanelsContent" id="derek">
If you want to assign different CSS rules to your content-panel, then why not apply those rules as follows:
       <div class="TabbedPanelsContentGroup" >
        <div class="TabbedPanelsContent b l r" id="derek">
Also you can apply CSS rules within the TabbedPanelsContent-div to suit your needs.
I hope this helps.
Ben

I want to place a query in main menu

Hi Experts
I want to place a query in main menu but it is not in a crystal report format? How should I be able to do that in SAP 8.8?
Please guide me further in this matter.

Hi Bhavesh.....
If it is the case of only SQL Query then it is not possible to take it under standard module but you can definitely take it in User Menu.
But if it is the case of Crystal Report then you can anyway include it under standard module list.....
Regards,
Rahul

CC application file sync issue and CC App broken menu..

1. File sync from Photoshop CC has stopped working.
Photoshop reports the last sync time and date in edit>sync settings.
However in my Application settings I get the following..
Application settings are synced between many of your favorite desktop applications and Creative Cloud, allowing you to work consistently from any machine. To begin syncing, you will need to open your desktop application and click "Sync Settings Now".
You currently do not have any synced settings.
2. I have missing menu items in the CC app cog menu (I assume as reported on other threads) including "stop syncing", preferences/settings and other blank or greyed out items.
Prior to that I had the also reported dead CC app issue and uninstalled and reinstalled the app, which fixed dead app but left the munu broken.

Hallo over there
After using creative cloud cleaner ....
every things is ok...8-)
Sendt fra mobilen....
Med venlig hilsen/Kind regards
Fotograf Hans Søndergaard
Allégade 23 1.baghus
DK 2000 Frederiksberg
M: +45 4044 8190
[email protected]
www.soendergaard.com
Den 07/11/2013 kl. 17.32 skrev Simon_P1 <[email protected]>:
Re: CC application file sync issue and CC App broken menu..
created by Simon_P1 in Adobe Creative Cloud - View the full discussion
Since the CC app messed up again and yet another reinstall, it is working (sort of, after several sync failures of lrcat) properly, including the menu, all be it very slowly considering the fast upload I have.
As is the setting sync finally.
Thanks for keeping me informed, oh wait, you didn't!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5823499#5823499
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5823499#5823499
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5823499#5823499. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Issues adding friends to iChat, please help!!

I am having issues adding friends on ichat. I can enter their emails but it doesn't notify them on their computer that I added them. How do I fix this?

Hi,
iChat uses Screen Names (with AIM and can be email in style)
Jabber Names/IDs look like emails as well but with Googletalk, FaceBook and Jabber Australia being the few exceptions I know of.
AIM Names when registered look like an email ([email protected]) but you do not need the @AIM.com suffix when adding them as a Buddy.
(Apple IDs of @mac.com and @me.com do need the relevant suffix)
It would help if we knew what type of Buddy List you were adding these to and what sort of "Email address" they are.
11:27 PM Friday; March 2, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Issue adding user Calendar

I am having an issue adding a user calendar.
In the Workgroup manager if I enable calendaring it seems to allow me to select the host and save it, but if I come back later it is still deselected.
Note: all users and groups have access to all services at the moment, and the web calendar is enabled for their group. The DNS seems to be working fine - the Wiki works without a problem, so does AFP, and Open Directory logins.
Any help would be appreciated.

Wish I had some luck on this.
I changed over the OSX server to handle DNS - which works fine -just in case that had any bearing, but no luck as yet - it still refuses to enable calendaring for any user.

Issue adding Query to My Menu

Similar Messages

Maybe you are looking for