Issue in ENCE (Engineering and Construction) module..

Hi Folks,
Dont know if this is the proper forum, since this seems to be a custom module provided by Oracle Consulting. But many Oracle EBS users use this module, so here goes:-
Oracle ENCE module creates SOVs (Statement of Values) which are essentially contracts. The module doesn't provide any way from front-end to delete SOVs. But miraculously, couple of SOVs are now been deleted from back-end.
Does anyone here use ENCE, or is there any other way (without module knowledge) to find how this happend? There are no history tables also.

I don't know anything about ENCE but typically if the auditing is not turned on and if there are no history tables, it is very hard/impossible in EBS to find who/how a record was deleted.
I have had success in similar situations with the following options but they are not fullproof. Follow those only if you are desperate.
You can attempt to go thru' all_source view for any program that has "delete" and "ence_contract_headers" (I made the name up). You can also generate fmt from all forms and try to grep thru' those. And you can run strings command on all binaries and do a grep.
Here are some possible non-technical reasons
1) User thought he/she saved the record but didn't
2) User created the record in test instance and is looking for it in prod
3) User is looking for the wrong contract number
I suggest you log an SR with Oracle if ENCE is supported by Oracle Support. You can check your CSI if you have support for this module.
Hope this helps,
Sandeep Gandhi

Similar Messages

Unusual issue with tag engine and BELKIN USB to Ethernet adapter??

I have an .scf file with 72 tags and several tag groups in it. If I open the tag engine without the usb adapter, I can read the tag group names with the get group list.vi. The tag group names are listed in black letters when wired to an indicator. When I plug in the usb ethernet adapter, immediately the group tag names are greyed out in the indicator without even running the vi. If I put a tag constant on the block diagram and try to select a tag name with the pointer, no tagnames pop up. It worked yesterday and my IT. department sent down a shockwave and flash5 update download when I booted up this morning. anyone have any ideas??

I am still seeing the tag groups disappear when I start the tag engine on labview7.0. I have several other programs running at the same time, KEPWARE, PROWORX NXT, USB to ethernet adapter. This is on a win2000 machine.
Attachments:
op50_head_press_force_status_rev2.vi ‏320 KB
Process_Sta2_probe_results.vi ‏42 KB
op50_head_version2.scf ‏53 KB

Issue with Color Management and Print Module

The is a repost per request from a comment on Julieanne Kost's blog...
Having sticky output settings can be useful but now that LR has a color managed workflow, it introduces some problems. For example, if a Proof Copy is created and edited to a particular profile, then that copy is taken into the Print Module, if the output profile that has “stuck” from the previous job does not match you have a problem. It would be nice if the behavior for proof copies would be to automatically match the editing profile or at least warn of a mismatch. And while it is nice to be able to create a Saved Print with all the output parameters, it would be helpful to be able to create saved sets of “Print Job” settings assuming that they will be consistent for a particular printer/ink/paper combination (and whatever “Print Adjustment” you have found to your liking) then easily applied to any image being prepared for output. Perhaps a “save setting” selection under the “Print to:” menu.

So what you propose is the templates are proof copy sensitive and if they are setup for profile A but the proof copy describes profile B, then everything but the template defined profile is honored? I could get behind that idea (but what if one selects multiple VC’s with differing profiles and goes into Print?).
That's pretty much it. It does get complicated quickly as you look at multiple VCs or (and I think we need to start making the distinction between proof copies and ordinary virtual copies) if you bring a mixture of PCs and VCs into the print module. I would suggest that the default behavior be to set output profile of the PC as defined in the PC and retain the "sticky" behavior for ordinary VCs.
I also think that having the ability to save a "Print Copy" may change what we need out of the templates and perhaps their overall function should be re-evaluated.
The VC name should show you the profile used for soft proofing if you have the overlay on. That helps too. My concern are those who work with these VC’s and the text overlay is off.
I'm not getting that behavior. The only place the copy name shows up in the print module is in the filmstrip header. Maybe I have a preference set wrong somewhere... Still, I'd rather the software take care of making the match rather than having to double check to make sure I haven't inadvertently changed the profile somehow (i.e. clicking on a template just to see how it would look on another size paper).

Business Process Material issue to External Vendor and recovery of amount

Dear Business Experts,
I want to know SAP Best Business Practice/Solution for Engineering and Construction Industries in above scenario i.e.
In this scenario Store issue raw materials to various Subcontractors / contractors (Who engaged for the project to carry out various services) on Moving Average Price Plus 10% Extra a debit basis and abstract details (Material, qty., Rate- of issued on debit basis) are to handed over to Accounts for recovery posting (Credit Memo).
Process Flow is :
Step1) Calculation of Rate > Step2) Good issue (material with unrestricted stock, Rate as per step 1) from Store to Vendor > Step3) Credit Memo (ref. to Step2)
Please Suggest ...

Hello Raj,
Hav you found any solution for the query you posted,
If yes Pls share the same as i am also facing a similar Scenario.
Thanks
Shashank

PS module and SD Module are integrated?

Dear All,
How is the PS module and SD Module are integrated?
I am thinking the linjk is only through the WBS element .please guide me if am wrong.
But I am not able to get the data flow across these two modules.
Is there any other setting to be done in the IMG ?
My client scenario needs a close interaction(flow) of data from PS to SD
I am trying to establish this llink through DIP profile and RRB .As i am not familiar
either with DIP Profile or with RRB.In these circumstances i seek your help.
Rewards are assured for timely & valuable help.
Thanking you,
Best Regards,
R.Srinivasan

Hi Ramanujam,
Please find below the complete stuff reg PS integration with SD Module:
SD INTGRATON WITH PS (Project Systems)
PS SD integration happens during Milestone billing...
Below is whole process-
Billing Plan for Milestone Billing
Milestone billing means distributing the total amount to be billed over multiple billing
dates in the billing plan.
As each milestone is successfully reached, the customer is billed either a percentage of
the entire project cost or simply a pre-defined amount.
During sales order processing, the system determines from the item category whether a
billing plan is required and, if so, which type of plan
The type of billing plan that is determined at this point is set up in Customizing and
cannot be changed in the sales document.
Billing plans for periodic billing and milestone billing plans for project-related milestone
billing have different overview screens so that you can enter data relevant to your
processing.
For example, for milestone billing, you must be able to enter data to identify the
individual milestones.
IMG configuration requires:-
1. Maintain billing plan types for milestone billing in OVBO.
2. Define date description in SM30 - V_TVTB.
3. Maintain Date Category for Billing Plan Type IN OVBJ.
4. Allocate date category in SM30 - V_TFPLA_TY.
5. Maintain date proposal for Billing Plan Type in OVBM.
6. Assign Billing Plan Type to Sales Documents Type in OVBP.
7. Assign Billing Plan Type to Item Categories in OVBR.
8. Define rules for determining the date in OVBS.
Milestone billing is typically used for billing projects, such as plant engineering and
construction projects. Such projects often include a series of milestones that mark the
completion of different stages of the work. In the SAP R/3 System, milestones are defined
in a network along with planned and actual dates for the completion of work. The milestones
are also assigned to the billing dates in the billing plan.
Each milestone-related billing date is blocked for processing until the Project System
confirms that the milestone is completed.
Delivery-relevant order items for which a milestone billing plan applies are billed on the
basis of the requested delivery quantity and not on the total of the confirmed quantities.
The connection between the project and the sales document item is made in the individual
schedule lines of the item. Each schedule item can be assigned to a network in a project.
To display the project-related data for a schedule line, proceed as follows:
In one of the overview screens of the sales document, select
1. Item -> Schedule lines.
2. Mark the schedule line and select Procurement details.
The following figure shows an example of milestone billing where only the Contract have
been billed :
Order Item Turbine 100,000
Billing Plan
Billing date Description % Value Billing Block Milestone Billing Status
01-10-94 Contract 10 10,000 - x x
01-03-95 Assembly 30 30,000 x x
01-04-95 Maintenance 30 30,000 x x
01-05-95 Acceptance 30 30,000 x x
01-06-95 Final invoice .. .. x
Network/Activities
Milestone Estimate Actual
Assembly 01-03-95 01-03-95
Maintenance 01-04-95
Acceptance 01-05-95
For each billing date in a milestone billing plan, you can specify whether the billing
date is:
1. fixed
2. Always updated with the actual date of the milestone
3. Updated with the actual date of the milestone, if the date is earlier than the
planned billing date for the date
Following is the SD & PS integration scenarios where milestone billing & Periodic billing plays the important role for these integration:
Milestone billing is typically used for billing projects, such as plant engineering and
construction projects. Such projects often include a series of milestones that mark the
completion of different stages of the work. In the SAP R/3 System, milestones are defined
in a network along with planned and actual dates for the completion of work. The milestones
are also assigned to the billing dates in the billing plan. The connection between the project and the sales document item is made in the individual
schedule lines of the item. Each schedule item can be assigned to a network in a project.
PS-SD Integration as below:
A) Billing plan, at each WBS element, network and Activity level.
B)DIP profile which is assigend to item category. DIP for resource related quotation works only with ECP ( easy cost planning).
C)sales pricing - generally, there r 2 types of sales pricing in PS . lumpsum contract and unit rate contract.
D)BOS - bill of Services. which has to be activated. It is industry specific solution. If BOS is activated you also have integration for vendor RFQ and Analysis.
Further pls provide ME ur mail id , will mail some zip files regarding integration of SD module with all other module including PS.
Project System(PS) works for any project e.g construction, operation or any large projects where project management tools are required. it integrates all modules may be like MM for vendor process or for RFQ etc or say may be SD for Resource related quotation with the help of DIP profile or Milestone process etc. IT is largely used in construction projects. IT helps in controlling the whole of project from one single screen and it works with 3 elements WBS element ( work break down structure), Network and Activity.
Please go throgh this Please check this links perhaps they may help.
http://help.sap.com/bp_imcv1500/IMC_US/HTML/preconfigured_scenarios.htm
ETO:
http://help.sap.com/bp_imcv1500/IMC_DE/HTML/E83_EN_DE.htm
http://help.sap.com/bp_bblibrary/500/HTML/E46_EN_DE.htm
MTO:
http://help.sap.com/bp_bblibrary/500/HTML/V66_BB_EN_US.htm
http://help.sap.com/bp_imcv1500/IMC_DE/HTML/E70_MTOQuotProc_EN_DE.htm
PS - SD integration are on
1.Billing pan, at each WBS element, network and Activity level.
2. DIP profile which is assigend to item category. DIP for resource related quotation works only with ECP ( easy cost planning).
3.sales pricing - generally, there r 2 types of sales pricing in PS . lumpsum contract and unit rate contract.
4. BOS - bill of Services. which has to be activated. It is industry specific solution. If BOS is activated you also have integration for vendor RFQ and Analysis.
5. resource related Billing
The specified item was not found.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Issue with ALSA softvol and reloading sound card module

I'm using a Chaintech AV710 card with the snd_ice1724 module as a driver. The core issue is that sometimes when this module is loaded during startup (or every time after a suspend), it will play nothing but very loud static. To fix this, I simply reload the module. This fix worked fine for me while I used pulseaudio: I would just kill pulse, reload the module, and start pulse after every suspend. Now, however, I'm using a system that involves an ALSA softvol plugin. The softvol device is being used by JACK: jackd -d alsa -d softvol. When I reload the module using this setup, the softvol control I set up becomes locked at 100%. amixer reports "Invalid command!" for sset Master2 10%. The audio will still play, but I can't figure out any way to reset it to make this control work again short of renaming the control, restarting jack, renaming the control back to the original name, then restarting jack again. Any help alleviating this issue on any of these fronts would be appreciated. Relevant asound.conf sections:
pcm.mycard {
type hw
card AV710
device 1
rate 44100
channels 2
format S32_LE
pcm.softvol {
type softvol
slave.pcm "mycard"
control {
name "Master2"
card AV710
ctl.softvol {
type hw
card AV710
Last edited by XionZui (2013-06-11 16:33:25)

stlarch wrote:Hi, did you install alsa-utils and add alsa to your daemons array in /etc/rc.conf? Also, you need to add yourself to the audio group, #gpasswd -a yourusername audio. The wiki has an article on alsa that should help, or check the beginners guide.
Yes, of course, alsa-utils is installed (so is alsa-firmware, and alsa-oss). I'm in audio group.
ewaller wrote:can you post the output of
cat /proc/asound/cards
Also, you should have a directory /proc/asound/card0/ Which should have one or more files with names of the form codec#n, where n is a sequential integer starting with 0. If those files are not hellaciously long, post them here (With code tags). Otherwise, could you pastebin them and provide a link?
Edit: fixed typo
~ $ cat /proc/asound/cards
--- no soundcards ---
The directory /proc/asound/card0 doesn't exist :
~ $ lsi /proc/asound/
total 0
-r--r--r-- 1 root root 0 Mar 5 12:38 cards
-r--r--r-- 1 root root 0 Mar 5 12:38 devices
-r--r--r-- 1 root root 0 Mar 5 12:38 hwdep
-r--r--r-- 1 root root 0 Mar 5 12:38 modules
dr-xr-xr-x 2 root root 0 Mar 5 12:38 oss/
-r--r--r-- 1 root root 0 Mar 5 12:38 pcm
dr-xr-xr-x 2 root root 0 Mar 5 12:38 seq/
-r--r--r-- 1 root root 0 Mar 5 12:38 timers
-r--r--r-- 1 root root 0 Mar 5 12:38 version
Thanks for helping !

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a product through telnet or serial interface

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a range of products through telnet or serial interface and output pass/fail results.

If I understand correctly, you want to do the following:
1. Create one or more tab-delimited files that specify a series of query strings (that LabVIEW will send to your products) and expected reply strings (that LabVIEW will look for in response to each query)
2. Run your LabVIEW program (the test engine) and have it execute one or more test scripts from file using either TCP/IP or serial communication to your units under test
3. Track how many of the queries are met with the expected response, and output an indication of whether each step passed or failed
If this is close to correct, then I've attached a sample test file and LabVIEW VI as an example; I chose the TCP/telnet method because it allowed me to use the ni.com Web site to simulate my tes
t hardware. If you happen to own the LabVIEW Internet Toolkit, there's a VI called "Telnet Play Script" in the Telnet palette that does something fairly similar using TCP. The same general model would also work for Serial communications.
Hope it helps,
John Lum
Attachments:
test_engine.zip ‏24 KB

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a product through telnet or serial interface

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a range of products through telnet or serial interface and output pass/fail results.

Hello j. smith,
TestStand gives you the ability to create "sequence files" which are lists of tests to be run sequentially or in parallel. These tests can be written in any language: LabVIEW VIs, C/C++ DLLs, EXEs, ActiveX objects, .NET Assemblies, etc.
You can run your TestStand sequence files from a command-line prompt using the following syntax:
\bin\SeqEdit.exe" /quit -run
This will launch the TestStand Sequence Editor (and optionally prompt you for TestStand login information if you have this configured), run your sequence file, then exit.
If you're using the TestStand process model, it can output your results to a report file or database if you configure this. To use a TestStand process mo
del to execute your sequence file, use the following syntax:
\bin\SeqEdit.exe" /quit -runEntryPoint
Here's an example:
C:\>"C:\Program Files\National Instruments\TestStand 3.0\bin\SeqEdit.exe" /quit -runEntryPoint "Single Pass" "C:\Program Files\National Instruments\TestStand 3.0\Examples\Demo\C\computer.seq"
Note that multiple sequences and sequence files can be specified on the command line.
TestStand supports remote sequence execution using DCOM (Distributed COM), which is an east way to remotely execute tests. But as for running tests or commands through a telnet or serial interface, you would have need to check Windows documentation on how to execute command-line remotely like this.
David Mc.
NI Applications Engineer

11.1.2 - Workforce and CAPEX issue - Add New Hires and Add New Asset Rules

Hi All,
We are working on Oracle Fusion 11.1.2 and are using the out of box functionality for Workforce and CAPEX.
We are facing a weird issue in case of the above Modules when we try to Add a new Hire or a new Asset in the respective modules using the Add TBH Hourly , Add TBH Salary and Add Asset rules.
The Issue is sometimes the correct number of New Hires or Assets is added as specified in the prompt. For instance, if specify Number of New Hires as 5, then 5 rows of TBH are added on the web form dynamically with other employee properties populated on the form as mentioned in the prompt. However, at times this does not happen, so if I specify 5, 4 rows are added, if I specify 15, 7 rows are added and so on.
The out of box rule looks okay, we are not sure why this should happen?
Has anyone of you faced a similar issue, It would be really helpful if you can share your thoughts.
Thanks a ton in advance.
Madhavi

Have you try to check the related Business Rule? In older version Add TBH menu related to a Business Rule. Never configure this module on 11.1.2 but maybe the add tbh menu related to a Business Rule or Script on Calculation Manger

Issues with J2EE engine memory settings.

Hi SDN!
I've got Web AS server 7.0 (Java only) on laptop for development use. Laptop has 2 GB RAM and 1,83GHz Core 2 Duo CPU
I have several issues with Java Engine.
1)J2ee instance Settings.
For Instance:
- "Message server & bootstrap" node
     - max heap size: 256
- "Servers general" node
     - max heap: 1024
     -Xmx1024m
     -Xms1024m
     -XX:PermSize=256m
     -XX:MaxPermSize=256m
For Dispatcher:
- "General" node:
     - max heap size: 170
     -Xms170m
     -XX:NewSize=57m
     -XX:MaxNewSize=57m
- "Bootstrap" node:
     - max heap: 256
For Server:
- "General" node:
     - max heap size: 1024
     -XX:MaxPermSize=256M
     -XX:PermSize=256M
     -Xmx1024m
     -Xms1024m
     -XX:NewSize=171M
     -XX:MaxNewSize=171M
- "Bootstrap" node:
     - max heap size: 256
When I turn debug mode on for server via config tool, I've got 503 error and message "SAP WebAS Engine is starting... Message: Dispatcher running but no
server connected!" but in SAP mmc server instance looked like started (green color).
Windows Taskmanager shows me that 2GB total memory and near 600 MB of memory free.
Also I'm confusing about these nodes ("general", "bootstrap") with similar parameters and don't know which parameters I should set up according to note
723909.
2) I need to modify Java applications, build, deploy to local server and debug it there. Also may be ABAP debug will be used. Please give me information
about optimised engine (and, if needed, NWDS) settings for these tasks.
Help will be appreciated.
Regards, Lev

In general terms, the bootstrap process is what is used as java is starting up and pulling objects into memory. The heap used for the bootstrap process (I believe) is returned to the system after startup.
The server process is where the Java application server applications are so it will require the most heap.
Does that help?

Security & Servlet engine and ejb container on different servers

          When you have the servlet container and the ejb container on different physical servers,
          how is the rmi connection meant to to be done while still maintaining the seucrity
          propagation from servlet to ejb tier?
          Assume that my user is already authenticated (forms) on the servlet tier. Do we then
          create a dedicated connection (InitialContext + url/username/password properties)
          to the ejb tier and store this connection in the HttpSession? (basically authenticating
          a 2nd time)
          OR,
          can the servlet container make a generic connection to the ejb container, and pass
          the users security context to the ejb tier transparantly?
          -Sam


Nick Minutello <[email protected]> wrote:
          > Assuming that web container security is being employed, I guess the fundamental question
          > is: Is it necessary to create a "connection" (ie. an InitialConext) per user, or
          > can a "global" initial context be shared (in the end, the TCP connection is shared
          > anyway)?
          It doesn't create a 'connection' per user - when you use JNDI authentication (specifying
          principal and credentials when constructing InitialContext) it associates security info
          with the current thread for the duration of the request. If you cache InitialContext and
          use it later on some other thread it will not do anything.
          > Does it really matter?
          No ;-)
          > Thanks,
          > Nick
          > "Dimitri I. Rakitine" <[email protected]> wrote:
          >>Nick Minutello <[email protected]> wrote:
          >>
          >>
          >>> OK, so when I create the InitialContext, I just specify the URL (to call
          >>the remote
          >>> EJB container). The user ID and credentials are mapped automatically.
          >>
          >>> I obviously also need to cache the initialContext variable in my HTTPSession
          >>object?
          >>
          >>> What would happen if I had one InitialContext for the whole servlet engine
          >>- and
          >>> each thread used that. Would the thread (security) context still get passed
          >>- or
          >>> would the credentials for the original connection get used?
          >>
          >>If you use web-app security, container will associate security info with
          >>the current
          >>thread before invoking your servlet. If you do not use it and cache InitialContext,
          >>
          >>then the current user will always be 'guest' (except for the very first
          >>time when
          >>application calls 'new InitialContext()' with username/password.
          >>
          >>
          >>> Thankyou.
          >>> -Sam
          >>
          >>
          >>> "Vinod Mehra" <[email protected]> wrote:
          >>>>
          >>>>"Sam the bad cat" <[email protected]> wrote in message
          >>>>news:[email protected]...
          >>>>>
          >>>>>
          >>>>> When you have the servlet container and the ejb container on different
          >>>>physical servers,
          >>>>> how is the rmi connection meant to to be done while still maintaining
          >>>>the
          >>>>seucrity
          >>>>> propagation from servlet to ejb tier?
          >>>>>
          >>>>> Assume that my user is already authenticated (forms) on the servlet
          >>tier.
          >>>>Do we then
          >>>>> create a dedicated connection (InitialContext + url/username/password
          >>>>properties)
          >>>>> to the ejb tier and store this connection in the HttpSession? (basically
          >>>>authenticating
          >>>>> a 2nd time)
          >>>>>
          >>>>> OR,
          >>>>> can the servlet container make a generic connection to the ejb container,
          >>>>and pass
          >>>>> the users security context to the ejb tier transparantly?
          >>>>
          >>>>If the user has logged in already, ie the authenticated user is already
          >>>>in
          >>>>the execute
          >>>>thread, the identity should be propgated to the ejb tier transparantly,
          >>>>when
          >>>>you create the
          >>>>new initial context.
          >>>>
          >>>>--Vinod.
          >>>>
          >>>>
          >>>>>
          >>>>> -Sam
          >>>>>
          >>>>>
          >>>>
          >>>>
          >>
          >>--
          >>Dimitri
          >>
          Dimitri

Library and Develop Module Photos Appear Different

I am using Lightroom 4.4 Dell Ultrasharp monitor is calibrated. I own and have been referring to Scott Kelby's Lightroom4 book for digital photographers. I recently took some photos of my daughters prom. She had on a beautiful reddish orange dress. I notice that the dress appears very red in the develop module, however, appears a bit more orange in the library module. The change is very noticeable between the modules. The dress also appears similar to the library module view (a bit more orange) when viewed on the web via Flickr utilizing Chrome, Firefox, or IPad. It also appears the same when exported to a JPEG file.
I have done some experimenting and have determined that this color change effect appears to be very noticeable utilizing the Adobe Standard Camera Calibration Profile. It does not happen (at least to a noticeable extent) with the others such as Camera Standard where the dress appears a bit more orange in both the library and develop module. I do, however, like the appearance of the Adobe Standard profile better and this happens to be the default profile as well.
I have also noticed that the dress looks more orange when Soft Proofing is enabled. The change happens immediately when the check box is enabled. Checking the box makes the photo appear similar to the Library module view. Enabling Soft Proofing does make noticeable that there is Destination Gamut Warning which mainly involves the dress which is the point of interest, however, there is no warning with the Monitor Gamut Warning. I am intending to place the photos on the web at this time via Flickr. I will be printing several later so will be worrying about the printer gamut at that time. But for now, I would like to get the photos on the web looking as intended.
Having the photos look so different in the Library and Develop Modules is very frustrating. I am hoping that there is a simple setting or fix for this problem that I am experiencing. Your assistance will be greatly appreciated. Thank you.
-Mark

Hi Victoria. Thanks for your reply. Re the saturation of the yellows, an example of a photo which shows the behaviour is that of a sunflower shot in direct sunlight. So a typical bright yellow. The raw files are from a D7000, so I have several "camera" profiles to choose from in LR4, in addition to the default Adobe Standard. None of the camera profiles show a difference between Library & Develop. Also, the Adobe Standard profile only shows the described behaviour when yellows are present. I can find plenty of examples where the photos are identical between the two modules when there are no yellows in the shot. I doubt this is a monitor profiling problem, given that it affects just the Adobe Standard profile, however I will try re-profiling. My U2412M display is not wide gamut. I posted here because the issue I am seeing sounds very similar to the original poster's. We're both using Dell Ultrasharp displays, although that could be a coincidence. I'll see if I can get some screen grabs from my Mac and upload here later today. I'm on my Windows 7 laptop at the moment.
R
Update:
I have a pair of screen grab JPEGs from the Mac which I'm happy to share, however the upload here in the forum is limited in size. Any suggestions how I can best share the full size JPEGs?
Re-profiling hasn't changed anything. I'm pretty sure my profile is good. Ambient natural lighting, monitor warmed up, etc. Native white point used as always. The difference between profiled and unprofiled is very subtle. The U2412M appears to be pretty accurate at factory settings.
If I turn soft proofing on in Develop I see the less saturated image which matches Library. Turning it off again and the differences return.
LR4 on my Windows 7 laptop doesn't have the same problem. The screen on that is calibrated with the same Spyder3, however the laptop's screen is of a mediocre quality compared to the U2412M.
Found another thread where the poster is having the same problems with yellows, this time in LR5.
http://forums.adobe.com/thread/1265004

What is the difference between subroutine and function module?

What is the difference between subroutine and function module?

Hi,
they can both return values.
FMs are mainly used when a routine is to be performed by many programs.
Subroutines (forms) are generally only executed within one program.
You can perform routines from other programs, but it's not often done.
both forms and FMs are reusable modularization units.
To distinguish we generally say that forms are used for internal modularization and
FMs are used for external modularization.
To decide on which to implement, consider whether you need the content to be used just for a limited program
or wheteher it can be called from many independent programs.
For the first purpose it is better to implement a form whereas for the second we implement an FM.
However, ABAP does not isolate the usage context.
That is; you can call a form from another program within whose code the form is not actually implemented.
However, this requires attention since the form may utilize global variables.
The same issue holds for FMs.
FMs are encapsulated in function groups and function groups may have global variables that can be globally
used by all FMs inside it.
Thanks,
Reward If Helpful.

Integration on quality module and sd module

Hai experts
Any integration on quality module and sd module in sap if yes where the integration point..........
thanking u.....
regards
anjan

SD module is highly integrated with the other modules in SAP.
Sales Order
Integration Points                      Module
Availability Check             -       MM
Credit Check                   -       FI
Costing                        -       CO/ MM
Tax Determination              -       FI
Transfer of Requirements       -       PP/ MM
Delivery & Goods Issue
Integration Points                      Module
Availability Check             -       MM
Credit Check                   -       FI
Reduces stock                  -       MM/ QM (Inspection before moving stock to unrestricted Stock / before despatching the material)
Reduces Inventory $            -       FI/ CO
Requirement Eliminated         -       PP/ MM
Billing -
Integration Points                      Module
Debit A/R                      -       FI/ CO
Credit Revenue                 -       FI/ CO
Updates G/ L                   -       FI/ CO
(Tax, discounts, surcharges, etc.)
Milestone Billing              -       PS
Return Delivery & Credit Memo -
Integration Points                      Module
Increases Inventory            -       MM/ QM (For Inspection)
Updates G/ L                   -       FI
Credit Memo                    -       FI
Adjustment to A/R              -       FI
Reduces Revenue                -       FI

Conversion Agent and the module processor

Hi,
i have to make an offer for a client of ours. Therefore i was thinking to propose the conversion agent for developing a process module into the inbound communication channel in the XI-Scenario.
But i think i understand sth wrong or does this module substitute the normal mapping inside the XI?!
Can someone give me a hand?!
thx in advance

Jens,
Conversion Agrent is used to convert non XMl data into XML and vice versa.
For example it can read a PDF, EXCEL and conevrt it into XMl and also convert XML into EDI formats etc etc.
You use the conversion agent studio to develop the conversion mapping and then deploy it as a module. From the comm channel you call the Conversion Agrent Module which in turn runs on its own Engine and does the conversion for you.
So, if possible, you can also use conversion agent to actually read your source and create iyt in the format of the target and thgerbey replace Mapping. But, it all depends on the feasibility of what you are trying to do.
Regards,
Bhavesh

Issue in ENCE (Engineering and Construction) module..

Similar Messages

Maybe you are looking for