Issue in MessageChoiceLOV while doing a search
Hi,
I have a MessageChoiceLOV and in the processrequest method of that particular LOV, i have the below code:
OAApplicationModule oaaplA = pageContext.getApplicationModule(webBean);
OAViewObject OAViewA = (OAViewObject)oaaplA.findViewObject("xxOrganizationListVO");
OAViewA.clearCache();
OAViewA.reset();
int cnt = OAViewA.getRowCount();
OAViewA.setRangeStart(0);
OAViewA.setMaxFetchSize(cnt);
OAViewA.setWhereClause(null);
OAViewA.setWhereClauseParams(null);
Now, When the custom page opens and i try to retrieve values in the LOV, everything looks good. But once i do a wrong search and the LOV doesn't display any records, no matter what i search for the next time, its not displaying any records.
I don't know if this is something to do with the code in the processRequest method i have posted above.
Please advice.
Thank you.
PK
Hi PK,
There is no need to write this code in lov CO.
Remove all the code from the lov CO ProcessRequest.
Lov takes care automatically.
Even if you need to write the code for any specific purpose, then please comment the two lines. It will work perfectly...
OAApplicationModule oaaplA = pageContext.getApplicationModule(webBean);
OAViewObject OAViewA = (OAViewObject)oaaplA.findViewObject("xxOrganizationListVO");
OAViewA.clearCache();
OAViewA.reset();
//int cnt = OAViewA.getRowCount();
OAViewA.setRangeStart(0);
//OAViewA.setMaxFetchSize(cnt);
OAViewA.setWhereClause(null);
OAViewA.setWhereClauseParams(null);
Thanks
Anoop
Similar Messages
-
IM Login problem Error while doing the search
Hi people,
I'm facing some strange behaviour with login for a couple of users, I have users that don't have problems to login and I have user that can't login, I'm sure that all of them are valid because they're login to Portal Server, and then launch the IMClient using SSO, users that can achieved the login can't found users that can't login using the "add contact" button of the IMClient.
In the javaws console I'm seeing this exceptions when a user can't login:
30 Oct 2007 14:02:18,898] [xmpp] [javawsApplicationMain] org.netbeans.lib.collab.CollaborationException: Error while doing the search
org.netbeans.lib.collab.CollaborationException: Error while doing the search
at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:330)
at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:262)
at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.getUserAttributes(XMPPPersonalStoreService.java:1211)
at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.getPrivateQuery(XMPPPersonalStoreService.java:1289)
at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.getProfile(XMPPPersonalStoreService.java:419)
at com.sun.im.service.xmpp.XMPPPersonalStoreService.getProfile(XMPPPersonalStoreService.java:240)
at com.iplanet.im.client.manager.CurrentUserManager.getCurrentProfile(CurrentUserManager.java:350)
at com.iplanet.im.client.manager.Manager.login(Manager.java:1255)
at com.iplanet.im.client.swing.login.DefaultLoginDialog.login(DefaultLoginDialog.java:550)
at com.iplanet.im.client.swing.login.DefaultLoginDialog.connect(DefaultLoginDialog.java:540)
at com.iplanet.im.client.iIM.startLogon(iIM.java:464)
at com.iplanet.im.client.iIM.init(iIM.java:203)
at com.iplanet.im.client.iIM.main(iIM.java:950)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.javaws.Launcher.executeApplication(Launcher.java:1171)
at com.sun.javaws.Launcher.executeMainClass(Launcher.java:1118)
at com.sun.javaws.Launcher.continueLaunch(Launcher.java:961)
at com.sun.javaws.Launcher.handleApplicationDesc(Launcher.java:515)
at com.sun.javaws.Launcher.handleLaunchFile(Launcher.java:218)
at com.sun.javaws.Launcher.run(Launcher.java:165)
at java.lang.Thread.run(Thread.java:595)
/home/lalo/.sunmsgr/mx_m53852_latam_int_bbvabancomer_com_mx/messages/scripts/scripts.txt
[SafeResourceBundle] Missing resource key: iIMFrame_title
[Fatal Error] :1:2908: The element type "body" must be terminated by the matching end-tag "</body>".
com.sun.im.service.CollaborationException: org.netbeans.lib.collab.CollaborationException: Error while doing the search
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at com.sun.im.service.util.ReflectUtil.getDelegatorObject(ReflectUtil.java:27)
at com.sun.im.service.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:179)
at com.iplanet.im.client.manager.UserCache.getPrincipal(UserCache.java:161)
at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:977)
at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:938)
at com.iplanet.im.client.manager.BuddyListManager.loadBuddyListNow(BuddyListManager.java:430)
at com.iplanet.im.client.manager.BuddyListManager.init(BuddyListManager.java:200)
at com.iplanet.im.client.swing.communicator.Communicator.<init>(Communicator.java:316)
at com.iplanet.im.client.swing.BuddyList.showBuddyList(BuddyList.java:187)
at com.iplanet.im.client.iIM.showBuddyList(iIM.java:1105)
at com.iplanet.im.client.swing.Client.openNetlertViews(Client.java:379)
at com.iplanet.im.client.swing.Client.showViews(Client.java:150)
at com.iplanet.im.client.iIM.loadNetLert(iIM.java:613)
at com.iplanet.im.client.swing.login.DefaultLoginDialog$1.run(DefaultLoginDialog.java:610)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: org.netbeans.lib.collab.CollaborationException: Error while doing the search
at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:330)
at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:262)
at com.sun.im.service.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:171)
... 19 more
[Fatal Error] :1:2908: The element type "body" must be terminated by the matching end-tag "</body>".
com.sun.im.service.CollaborationException: org.netbeans.lib.collab.CollaborationException: Error while doing the search
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at com.sun.im.service.util.ReflectUtil.getDelegatorObject(ReflectUtil.java:27)
at com.sun.im.service.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:179)
at com.iplanet.im.client.manager.UserCache.getPrincipal(UserCache.java:161)
at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:977)
at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:938)
at com.iplanet.im.client.manager.BuddyListManager.loadBuddyListNow(BuddyListManager.java:430)
at com.iplanet.im.client.manager.BuddyListManager.init(BuddyListManager.java:200)
at com.iplanet.im.client.swing.communicator.Communicator.<init>(Communicator.java:316)
at com.iplanet.im.client.swing.BuddyList.showBuddyList(BuddyList.java:187)
at com.iplanet.im.client.iIM.showBuddyList(iIM.java:1105)
at com.iplanet.im.client.swing.Client.openNetlertViews(Client.java:379)
at com.iplanet.im.client.swing.Client.showViews(Client.java:150)
at com.iplanet.im.client.iIM.loadNetLert(iIM.java:613)
at com.iplanet.im.client.swing.login.DefaultLoginDialog$1.run(DefaultLoginDialog.java:610)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: org.netbeans.lib.collab.CollaborationException: Error while doing the search
at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:330)
at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:262)
at com.sun.im.service.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:171)
... 19 more
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:977)
at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:938)
at com.iplanet.im.client.manager.BuddyListManager.loadBuddyListNow(BuddyListManager.java:430)
at com.iplanet.im.client.manager.BuddyListManager.init(BuddyListManager.java:200)
at com.iplanet.im.client.swing.communicator.Communicator.<init>(Communicator.java:316)
at com.iplanet.im.client.swing.BuddyList.showBuddyList(BuddyList.java:187)
at com.iplanet.im.client.iIM.showBuddyList(iIM.java:1105)
at com.iplanet.im.client.swing.Client.openNetlertViews(Client.java:379)
at com.iplanet.im.client.swing.Client.showViews(Client.java:150)
at com.iplanet.im.client.iIM.loadNetLert(iIM.java:613)
at com.iplanet.im.client.swing.login.DefaultLoginDialog$1.run(DefaultLoginDialog.java:610)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)All of the users are under the same ldap branch, and previously I ran the command: /opt/SUNWiim/sbin/imadmin assign_services, for that ldap branch.
Any suggestion? Thanks in advance....Finally we found the cause of the problems, for an strange reason if the user has the character '�' in his 'cn' o 'sn' he can't login, for example:
bash-3.00# ldapsearch -x -h ldap -p 389 -b "c=mx,o=isp" -D "cn=DirectoryManager" -w password "cn=mx.m524217" cn sn uid
version: 1
dn: cn=mx.m524217, ou=people, c=mx, o=isp
uid: m524217
sn: VERA TREVI�O
cn: mx.m524217
When a user login to IM made a search of users if he search a user that can't login that search doesn't found nothing and the exception I posted before appears in the javaws console.
But this only happened while we are using the gateway, if we point to the IM multiplexor directly we don't have all of this problems.
Regards.. -
What types of issues will come while doing migration from HFM 9.3 to 11.1.1
Can any body tell me what types of problems will come while migrating Classic app HFM 9.3.1 to EMPA 11.1.1.3? and how to resolve them?
Yes you will need to export the data from each essbase database and then load into the databases on your 11.1.2 environment.
The steps outlined in your post are just to move the planning applications relational piece.
Cheers
John
http://john-goodwin.blogspot.com/ -
Issues while creating a search project in BCC
Hi There,
Migrating the apps from 2007.3 to 10.0.3.Experiencing issues while creating a search project.
Step #1.In Search Administration,navigating through Project > Global Settings & creating a Content Label named as "Catalog"
Step #2.Navigating through Project > Create Production Project.Creating a project with Content Set as "CatalogSet"
Step #3.Adding a Content with this info:
Content Name: Catalog
Type of Content : ATG Repository
IndexingOutputConfig Path : /atg/commerce/search/ProductCatalogOutputConfig
Host name : localhost
RMI : 10160 ( RMI port of commerce instance)
Creating a content & getting the message as New Content "CatalogTest" has been created.
Issue #1: Content is not displaying in the Content eventhough content has been created successfully.
Issue #2: Getting error for "Default Text Processing Options"
You can refer these issues in the attached screenshot "Content-Page-with-error.jpg"
Step #4.Creating a new TPO as "English" & trying to "Associate Search Project" & getting an error.Refer the attached error log "Associate-Search-Project.log"
Due to these issues, "Build Index" button is disabled.Did anybody experienced these issues? Any help/comments are appreciated.
Also attached the full server logs as commerce-server.log & publishing-server.log.
Since no options for attachment in this forum, I posted the attachment in this link.Please refer it.
https://groups.google.com/forum/?fromgroups#!topic/atg_tech/csEHi-x3Nyc
Thanks in advance!
Mani
Edited by: user11263665 on Apr 25, 2012 10:38 PMWe faced the same problem when migrating from 2007 to ATG 10.0.3. The reason this error comes up is because the Search depends on a local customization adapter /atg/searchadmin/adapter/customization/LocalCustomizationDataAdapter which adds English as a language in the text processing options.
After the migration you need to import the initial ATG search related data into your Search schema. These instructions have been mentioned in the ATG install guide. Here is the extract from the docs.
Note: The import scripts import data using startSQLRepository. Make sure your JTDataSource and
FakeXADatasource are configured to permit this in home/localconfig. JTDataSource should automatically
point to FakeXADataSource. FakeXADataSource should point to the administration database, and
FaxeXADataSource_production should point to the production database. Note that some product
installation processes, including Oracle ATG Web Knowledge Manager Self Service, need FakeXADataSource
pointed at the production database, so you may need to change the FakeXADataSource between installations.
once you are done with the configurations above, import only the searchadmindata xml into search schema as this imports the LocalCustomizationDataAdapter config information into your search schema. Once this is done, you should be good to index.
<ATG10dir>\home\bin\startSQLRepository.bat|sh -m SearchAdmin.AdminUI
-repository /atg/searchadmin/SearchAdminRepository -import
<ATG10dir>\Search10.1\SearchAdmin\common\data\initial\searchadmindata.
xml -
Issue while doing material posting through Usage Decision
Hi all,
I have an issue while doing material posting through Usage Decision. Please find below the details.
Inspection Lot 10000604689
Material 1730PCPBS.0031
Batch QP611097 GQ02
Out of total qty of 2100 we need to post the following
To unrestricted use 2,098
To sample usage 2
Following error appears,
Deficit of SL Stck.in qual.insp 1,638 NO : 1730PCPBS.0031 62GQ GQ02 QP611097
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 1,638 NO.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing.
I have checked that quantity 2100 of material 1730PCPBS.0031 is in QI stock. Kindly advice what is the issue and why we are getting the error?
Regards,
BrijeshHi Brijesh,
What is the status of inspection lot?
One of the possibilities I think could be inconsistencies between MM and QM.
Have a look on SAP note 48815- Checking possible inconsistencies between MM and QM.
Regards,
Anand Rao -
While doing the goods issue system is thruoghing an erro message no VL621
hi ,
actually while doing the goods issue we had put a validation if that filed(serial number) is not valid.like AVAILABLE then the system has through to an error message.but after that error message system is throughing an nother error.
Risk of posting several mat.documents for one delivery->long text
Message no. VL621
Diagnosis
Processing has been terminated because there is the risk that the system
creates several material documents for this delivery.
Procedure
If this message occurs frequently, please note the exact situation and
procedure as well as error messages and inform the system administrator.
and we changed that error to warning also still we are getting that error message.
how to stopthis error message.hi actually not for serial number check.
there is a Z field in serial number master which is used for SIM number.
that SIM number will be validated with available SIM number from another Z table.
after this SIM error system is throughing this VL621 error after transaction terminated message. -
Issue while doing Segmentation using Relationship Category
Hello Experts
We are implementing SAP CRM Lean Marketing using CRM 7.0. We are implementing segmentation, mail forms and using "Follow-up Processing of Target Group" functionality to send e-mail/fax to the BPs in target group. We are not using Campaigns. The "Follow-up Processing of Target Group" functionality provides facility to send bulk mail by using the available "Export to Channel" function from the opened target group itself.
Our business requirement is to do segmentation based on Company attributes and Relationship Category. The output of the target group should enlist the persons related to the Company based on the relationship category selected while doing the segmentation. e.g. While doing segmentation if I have selected company attributes Industry Sector of companies as Agriculture, company type as Partnerships and selected relationship category Has Supplier, then for the Companies matching the segmentation criterion, the target group should enlist all the persons related with the company with relationship category Has Supplier. As a further step the e-mail/fax will be sent to all these persons
As per my understanding using standard InfoSet CRM_MKTTG_BP_ORG_CDE and while creating data source selecting BUT000_PER-PARTNER_GUID in the field business partner, I am able to get the list of persons matching the segmentation query as documented in the example above. But the issue is , the output of the target group only enlists matching Persons, it does not enlist the matching company ID /name in the output of the target group. So business is unable to understand the Person enlisted belongs to which Company.
We tried enhancing the output of the target group in order to add Company ID/ Name , but the issue is the BADI gets Input as persons BP id, nothing else, due to this if a person is having relationships with multiple companies, the BADI is unable to identify which company to choose as Relationship Category is not available to the BADI. And further issue is if a Person is having same relationship category with 2 companies e.g. Supplier for company A and for Company B too , in this case too the BADI is unable identify correct Company to return to the target group output.
Highly appreciate your early response in order to resolve this critical issue.
Thanks
AmbarHello Experts,
Elaborating the issue further
Using standard InfoSet CRM_MKTTG_BP_ORG_CDE and while creating data source selecting BUT000_PER-PARTNER_GUID in the field business partner, I am able to get the list of persons matching the segmentation query as documented in the example above. But the issue is , the output of the target group (shown as an ALV grid , when the target group is opened) only enlists matching Persons, it does not enlist the matching company ID /name in the output of the target group. So business is unable to understand the Person enlisted belongs to which Company. Can we enhance this ALV grid output of the target group ? if yes , how can it be achieved ?
As an alternative we tried implementing the BADI CRM_MKTTG_SEG_MEM_EX , that is used to define data export from the target group. But the BADI gets Input as persons BP id, nothing else, due to this if a person is having relationships with multiple companies, the BADI is unable to identify which company to choose as Relationship Category is not available to the BADI. And further issue is if a Person is having same relationship category with 2 companies e.g. Supplier for company A and for Company B too , in this case too the BADI is unable identify correct Company to return to the target group output.
Any suggestion solution to resolve this issue. Appreciate your early response.
Thanks
Ambar
Edited by: AMBAR ADHAV on Sep 10, 2011 11:00 AM -
How to change the g/l a/c being used while doing goods issue using migo
when I pass a migo entry whilie purchasing material
, the entry goes through stock
stock (230000 a/c no) 150 dr
GR/IR (150000 a/c) 150 cr
when I issue material after reservation for which again migo is done
entry is
repairs to plant and mach (4800569 a/c) 175
stock (230000 a/c no) 175
The stock a/c is debited and credited due to t.code obyc where for inventory posting I have assigned a/c 2300000 for valuation class assigned to material.
now I want to have a/c no 4800689 in place of 4800569. how can i change that.
that is when I issue material from stock this should be debited to 4800689 instead of 4800569. please provide t.code to change the gl from 4800689 from 4800569
full points will be awardedcontinuing my issue is it possible to that we donot have to change the gbb and vbr and still we can have the desired results.
that is we are able to use different gl for debit while doing goods issue from a single stocked material
or we want to have this result
1. repairs to p&m 1000 dr
stock of cement a/c 1000 cr
2. repairs to building 2000 dr
stock of cement a/c 2000 cr.
3. construction 3500 dr
stock of cement 3500 cr
we donot want to change the GBB and VBR every time or change the GL a/c while doing reservation.
is there any third option where we get the desired result without changing or entering the g/l manually
if there is please let me know the t.codes -
User exit while doing Goods Issue
Dear Guru's,
I have the below requirement from my client,
They want an warning msg from the system while doing Goods issue, if the stock of certain material is goes below min stock level, so i spoke to my abaper to create user exit, but he is asking for some programs from MM side related MIGO. What programs we need to give him ? is that right ? pls suggest
Edited by: channabasappa kallapur on Jan 21, 2009 5:29 PMI don't believe you need a user exit for this .. USE OMCM and configure the availability check against the appropriate movement type
-
Daear All,
while doing goods issue getting the error message : Acct. 200510 for trans./event key BSX, postable directly.
the same in goods receipt also.
please help me on this.
Best Regards,
Venkat.In FS00 ,Please TICK 'post automatically only' for the GL 200510.
Regards
jabeen -
Unit prie column disabled while doing miscellaneous issue.
Hi,
I'm doing miscellaneous issue on an item. but while doing the entry, the unit price column is disabled from entering the value. What could have gone wrong? But for some items the field was enabled to enter the unit price value. Both the items are having same templete and costing is also same(Average).
How can the unit price column can be enabled for the item?
Thank you
Regards
BKR.Hi,
To solve this you must update your studio. In lower studio versions (PlanViz) does not allow "unknown" XML tags sent by higher version servers. A fix for this issue was made so that PlanViz parser can simply skip unknown tags.
Please go to version 74, if possible.
Regards,
Michael -
Issue while doing GR (MIGO).
Hi All,
In my case, I need an automatically created inspection lot via GR in order to record the result. So the procedure in this case is first to create a PO, then GR and then tranfer order (LT01), this will create an auto inspection lot. So I created a purchase order (ME21n) for a material XXX in which QM and WM activated. Then while doing GR (MIGO), I am getting an error message " Change the inspection stock of material XXX in QM only" and system is not allowing to do GR. Can you please help me in this issue?.
Thankx.
SuryaD.Hi,
Error message you are getting is because , Inpsection lot has been created for this PO
Please verify the inspection set up for this material. Unless you clear the inspection lot ( UD) , you can not do the GR & Find out which type of inspection lot generated ( 01, 08 , etc).
Thanks,
Rajanikanth -
Just switched from safari on my imac. When using search menu in safari I had the option to "find on this page," which was an incredible help while doing research and looking for specific phrases/words. Is there any way to have this feature using firefox?
I think Safari has the same keyboard shortcut as Firefox "command+F" on a Mac or "Ctrl+F" on Windows.
Look in the lower left corner for the Find. There are more likely to be differences in Find Next and Find Previous in the keyboard shortcuts, but continuing at the Find bar at the bottom doesn't matter what browser you use. There is an "X" there to dismiss the Find bar. In Windows the "Esc" key will dismiss the bar if you are within the find text entry area.
Keyboard shortcuts:
* [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts?s=keyboard&r=0&as=s Keyboard shortcuts | How to | Firefox Help], from Mozilla very limited number of shortcuts but will show correctly for your system
* [http://dmcritchie.mvps.org/firefox/keyboard.htm Firefox and other Browser Keyboard Shortcuts (Comparison Table)], more comprehensive but is oriented to Windows users with some guidelines for Mac and Linux users.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
Exchange rate issue while doing incomin invoice
Hello All,
The user has posted PO with frame work order for that while doiing Incomin invoice he is getting the following error. Pls anyone help me regarding this issue.
Error:
EXCHANGE RATE OF CHF FIXED FOR TRANSLATION FROM CHF TO 1.0000
DIAGNOSIS
An exchange rate type is used for exchange rate CHF/CHF which is defined as a fixed exchange rate . However the exchange rate with which the system should continue to calculate is different from this fixed exchange rate.
In OB22 exchange rate type is specified M
In dev environment fixed check box has not selected for exchange rate type M.Company code currency is CHF.
In invoice under DETAILS tab in currency field - CHF is there and in exchange rate field - 1.00000 is there.
Why this error is coming am not understanding pls anyone can provide me solution .
thanks in advance
regds
ramachandraHello
For this error i am giving more details. company code currency is CHF frame work order has posted in CHF. In PO exchange rate it has picked up /1.0000 and fixed exchange rate check box has not selected. While doing MIRO the system has picked after entering PO number curreny CHF and exchange rate /1.00000. i think this is correct.
In OB22 first local currency is CHF ,translation taking transaction currency as basis and Group currency is USD , translation taking first local currency as basis, and index based currency is CHF. , translation taking as transaction currency as basis . for all we are using exchange rate type M . i am getting the error msg type F5 and message number 768.Doc type it is taking KB. for doc type KB no exchange rate type has assigned.
Edited by: ramachandra rama on Nov 3, 2008 1:35 PM -
My Iphone5 updated today with new iOS 6.1 and while doing that it has sync my phone number with my wife number in the same icloud due to which we receive each others SMS when we message each other. Anyone have idea how can I fix this issue in settings etc
Thank youMy Iphone5 updated today with new iOS 6.1 and while doing that it has sync my phone number with my wife number in the same icloud due to which we receive each others SMS when we message each other. Anyone have idea how can I fix this issue in settings etc
Thank you
Maybe you are looking for
-
How to insert a NULL value in SQL using JDBC Adapter
Hi All, I have a File -> JDBC scenario. In the File and in the SQL table I have a column called "MR_DATE" that needs to be mapped I have to do the following: If MR_DATE is NOT equal to "00000000" then pass MR_DATE to SQL table else
-
I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff . I received an email stating that Adobe could not release the payment and
-
How to implement password policy for a software in oracle (sql) forms & reports 6i ?
Hi all , I have to implement password policy for an already existing software which was created 2 to 3 years before. What exactly i want to do is I must alert the user every month to change his/her password. I have no idea about it. Can anyone help m
-
How to locate the POV intersections where Custom Document is linked to
Hi Experts, My customer tried to delete a custom document in HFM, and received an error message saying that the document is linked. Unfortunately, he does not remember what the POV intersections were? Is there a way to find out the POV intersections
-
Hi all, I have a problem with re-running a Thread. I try to reun a Thread via its start()-method. The first time everything works fine. The second time (after the Thread finishes his first execution) the run()-method is never invoked when calling sta