Value of Infocube and ODS Line Item for a Reporting User.

Hi,
I want to give authorizatoin to a reporting user for InfoCube as well as ODS Line Item . I tried give values of InfoCube as well as value of ODS Line Item in Auth. Object "S_RS_COMP" in the field of Infocube. But it only accepts the value of Infocube. Then where shall I specify the value of ODS Object.
Please guide
Sam

Hi Suneel,
Thanks for your reply.
Do you mean to say the check box in RSA1->EDit ODS Object->Settings->BEx Reporting ?
If you mean the same one, then it is already checked. But still am not getting the ODS Names in Infocube field of S_RS_COMP.
Regards,
Sam

Similar Messages

Actual cost line items for orders (KOB1)

Hello everyone,
I need to pull a certain field for an order to the
Actual cost line items for orders report (KOB1), but the field is not available when I
go to the change layout. Can someone let me know how I can have this
field listed?
Thanks in advance for your reply.
Daniel Nicula

Hi Christian,
Ok, so I would need some ABAP support for this right? I was hoping to do it myself.
But, the strange thing is that the field that I would like to bring in my layout is available in 2 clients in the same system and not in all the clients. I have one client in which this field is not available.
How can that be possible?
Bye!

How to not to display any line items for val flds values are zero in KE30?

Dear All,
In KE30,in one of my reports, i do not want to display such line items for which all values are zero for all val flds, it should only display the line items for which there is any value, i have tried Zeros hide in KE35 in formatting menu>other format>hide zeros, but unofrtunately it didnt came out.
Regards
Rashid
Edited by: rashinuet on Feb 20, 2012 4:38 PM

Dear Abhishek,
I have tried that as well in ke35 and made this option activated on my val flds like sales revenue for hide zero values, but it didnt came out as well, then in i tried ke32 change report >Extras menu>form settings, this adopts all the settings in the report from the form you have assigned, but this is not working, i am failed to understand what has gone wrong.
Regards

Seperate Line item for taxes in MIGO and MIRO

All SAP Gurus,
We want to inventories the CST (central sales tax) amount.
For this we have used the condition type JIPS, check marked the accounting key 'JI7' and gave posting indicator as '2' Separate line item.
Now, CST amount is getting inventorised at the time of GR. (but no separate line item is created at the time of GR).
During MIRO, the inventoried CST amount is getting deinventorised (although separate line item being created here).
Can we have separate line item in MIRO, without getting value deinventorised? (as it happens for freight)
Regards,

Hi Kunal,
Thanks for the reply.
As you have rightly said, we need to tick 'NOT DEDUCTIBLE' in OBCN (we have already did that).
And key has been already assigned in Atx procedure for the appropriate condition type.
But the problem is that, we want separate line item for this tax amount in MIGO.
Is it possible to have separate line item for the tax amount in MIGO (as we can get separate line item for freight in MIGO).
Regards,

T.code required for Vendor line item display and Customer line item display

Hi Gurus,
Pl provide me transaction code for "Vendor line item display and " Customer line item display apart from FBL1n for vendor and FBL5n for customers.
Kindly advise.
Regards,
Samar

Hi,
You could use these, for example:
S_ALR_87012103 - List of Vendor Line Items
S_ALR_87012197 - List of Customer Line Items
Just curious: what's wrong with FBL1(5)N?
Regards,
Eli

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

IDOC posting for distinct PO records(as header) and article(line item)

Hi! All
It would give me your valuable suggestions and help me with developing the mapping below:
I have a file to IDOC scenario, which has about 10 fields and two of these fields are PO and article no.
I need to post IDOC for each distinct PO number(header) and then article number under these PO should post as line items.For exmaple:
consider sample records having the following PO and artcile number:
PO|article_no
123456|abc123
123456|abc456
123456|abc678
These 3 records should post only as one IDOC, having the header PO 123456 and line items(abc123,abc456,abc678)
On the target side, PO is mapped to the parent segment and artcile is in the child segment.
Thank you for all the help!!
Regards,
Patrick.

Patric,
I think solution is simple...while creating recordset from file create recordset for every occurance of Header..
I think your File structure would be something like this in FCC..
header,1,Line_Item,*...hence it wull create recordset for every occurance of header and you can map Line Items to idoc line items...Also specify recordset per messages = *.
I have done something like this...
Let me know if you need mode details.
Nilesh

GR Doc# and GR Line Item Number

Hi All,
We have custom defined infocube actually WM-stocks.Now our requirement is to add GR Number and GR line Item Number. can be these be added to Infocube or should we go for ODS? any help from experts?
Data has been loaded from generic datasource which is based on LQUA table.
regards

Hi,
We implemented just the opposite:
A cube for line items, an ODS for header data which didn't went to the cube (I mean those data that cannot be calculated by summing up item data).
If we need summary data from ODS, we use RRI.
Everything depends on a level of details you need. In our case we needed analysis on item data.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Differences between an InfoCube and ODS object

Hello All,
I am always hearing that an ODS overwrites data while a cube adds data loaded, and an ODS is a flat table etc.
Does anyone have a comprehensive document/article on how they differ so that I can be weary when doing data loads etc and be in a better position to not make a mistake when deleting data out of the targets etc, especially since financial data is so sensitive.
Thank you and kind regards,
Keith Kibuuka

Hi Keith,
I found below data on another site..
The most important difference between ODS and BW is the existence of key fields in the ODS. In the ODS you can have up to 16 info objects as key fields. Any other info objects will either be added or overwritten! So if you have flat files and want to be able to upload them multiple times you should not load them directly into the info cube, otherwise you need to delete the old request before uploading a new one. There is the disadvantage that if you delete rows in the flat file the rows are not deleted in the ODS.
I also use ODS-Objects to upload control data for update or transfer routines. You can simply do a select on the ODS-Table /BIC/A<ODSName>00 to get the data.
ODS is used as an intermediate storage area of operational data for the data ware house . ODS contains high granular data . ODS are based on flat tables , resulting in simple modeling of ODS .
we can cleanse transform merge sort data to build staging tables that can later be used to populate INOFCUBE .
Thanks
An infocube is a multidimentionsl dat acontainer used as a basis for analysis and reporting processing. The infocube is a fact table and their associated dimension tables in a star schema. It looks like a fact table appears in the middle of the graphic, along with several surrounding dimension tables. The central fact is usually very large, measured in gigabytes. it is the table from which you retrieve the interesting data. the size of the dimension tables amounts to only 1 to 5 percent of hte size of the fact table. common dimensions are unit & time etc. There are different type of infocubes in BW, such as basic infocubes, remote infocubes etc.
An ODS is a flat data container used for reporting and data cleansing/quality assurance purpose. They are not based on star schema and are used primaily for detail reporting rather than for dimensional analyais.
An infocube has a fact table, which contains his facts (key figures) and a relation to dimension tables. This means that an infocube exists of more than one table. These tables all relate to each other. This is also called the star scheme, because the dimension tables all relate to the fact table, which is the central point. A dimension is for example the customer dimension, which contains all data that is important for the customer.
An ODS is a flat structure. It is just one table that contains all data.
Most of the time you use an ODS for line item data. Then you aggregate this data to an infocube.
cheers,
Vishvesh

Issue with report (S_ALR_87013611) that is actual/plan line items for Cost

Hi Gurus,
I am having issue with the report (S_ALR_87013611) that is actual/plan line items for Cost Center.
When i execute the report for a cost element 510200 the amount is 23,380.13, but when i drill down on it by double click on that amount the value in obj curr is 15468.91. Hence there is the differnce. When i futher drill down by double click on the amont of 15468.91 and i go to display group currency and take the total it is 23380.13 and display in local / doc currency the amount is 15468.91. I guess due to this there is difference. The cost center & the cost elements are the same i have checket it.
My concerns is that the group curr is USD and obj curr / local curr is USD. So is group curr and doc curr is USD then when i click on dislay curr and select group curr why the amounts are changing.
Kindly adivce

Try to look if there is any filtering criteria applied in the report to which you drill-down.
The difference can be also caused by the "value type" - some reports show actual and statistical costs together in one column while the others strictly show (are defined to show) only e.g. actual costs (type 04) and not the statistical costs (type 11)

FB60 - Two line items for tax amount (Posting Key - 50)

Hi,
I am facing some issue in FB60 invoice posting. For the same vendor(say V1) I am posting 2 different invoices for 100 USD - the company code, G/L, CostCenter & Tax Jursdiction code are different in both the cases. Once I do FB60 and got to document overview screen this is what I see...
Case1 - in the document overview screen I see a Posting key(PK) 31(invoice amount), PK50(tax amount) & PK40(total amount)...which is fine.
Case2 - in second case the document overview shows two line items for PK50(credit - tax amount) and tax amount is different.
Two questions...
1) Why there are two tax items (PK50 items) - is that dependent on tax rule or vendor or company code?
2)My client says the tax amount should be same in both cases - but I am wondering how can it be, when tax codes are different in both the cases? Where can I check how these tax values are getting calculated.
Any adivse/hints will be greatly appreciated/rewarded.
Thanks
Kiran

AKu
I got the same scenario also
this second document display because of material price change u can double click that document

Additional line item for Exchange rate gain / loss

HI,
We ahve three currency as Main currency (INR), group currency (INR) and Hard currency (USD).
When we pay to vendor or received from customer, system generate additional line item for Exchange rate gain / loss with Rs. Zero . But transaction is in INR. But it has value in USD as USD 0.01.
Please suggest.
Regards,
Harshal

Hi,
I got your point.
Its a standard behaviour as part of parerral valuation with addtional local currency.
Please make sure that the below are set in your system.
1) in OB22, for your company code, for the HARD CURRENCY--The source curr must be Translation taking first local currency as a basis
2) For every foriegn currency you use, you maintain the exch rates in OB08 with Foriegn Currency 2 Local Currency combination always. And at the same time make sure that there is no opposite combination rates for the same.
(Like 1 USD = 50 INR...1 GBP = 80 INR....1 EUR = 60 INR only)
These may avoid most of the cases where 0.00 LC value lines during clearing.
Regards
Srinu

Which table has Batch# value as seen on PO line item ?

Hello friends,
The Purchase Order line item shows a field for Batch-number. However, this field is not there in EKPO table. So can someone tell me which table has the Batch# value (as seen on PO line item) and how it is linked to that line item's record in EKPO table ? Thanks for your help.
- Chetan

Hello,
I found one field in table EKET. (EKET-CHARG)
BR
Csaba

Infocube and ODS populated with DATA (need to add one more field?)

Hi,
If infocube and ODS have been populated with data for past 3 months. Then we need to add one more field to this cube. What is the impact? Please advise.
The following is my understanding. Please correct me if I am wrong.
1) Need to delete content of ODS and infocube.
2) insert the new field at ODS and infocube.
3) reload the data into ODS and infocube.
Is there a way that the current data need not be deleted.
Just add in this new field and only subsequent month, infocube will have this new field? Please advise what is the best approach without affecting existing data.

Hi,
Siggi is right. You dont need to delete the previously loaded data to CUBE or ODS. The only catch is that, your new field will be empty as far as history is concerned. But so long as you did map it to the datasource and the datasource is able to fill it up, then your new field will now have value for incoming DELTA Updates.
Addition of a field is not that complicated compared to deletion of a field from CUBE or ODS.
--Jkyle

Derivation of Profit Centers in case of bank and Cash line items

We are in the process of configuring the Profit Center Accounting functionality. We are in ECC 6.0 but have not migrated to New G/L.
We understand that Profit center needs to be derived for each of the items for which it does not flow online in realtime. As regards Bank and Cash Line Items, we are not able to understand how Profit Center Derivation will happen.
We have posted an FI payment document using Tcode F110 and further to which we executed F.5D and 1KEK. Further to this, we have checked the Profit Center Total records report (2KEE). It updates the vendor line items. But it does not reflect the Bank line item. Unless this happens, we understand that our Profit Center wise Trial Balance will not tally.
Kindly let us know how bank and Cash line items will update in PCA. In our view, it should derive the Profit center from the offsetting entry in the vendor invoice. Pl. correct me if I am wrong.
Pl. help.
Venkat Iyer

Hi Venkat,
You may define a derivation rule in 3KEH
Regarda
Sachin

Value of Infocube and ODS Line Item for a Reporting User.

Similar Messages

Maybe you are looking for