Issue in STO process-"only 0 MT of material available".

Hi All,
I am facing this issue during STO processing using mvt scenario 15 & 16. Let say that i have 5Mt of material stock left at plant A(dispatch plant). When create the load ticket(mvt-15) for the same qty , the ticket is created successfully. Now when i do the unloading ticket(with mvmt 16) the delivery doc gets created with the following error message-"only 0 MT of material available".
I have checked the stock, and the stock is available for at the dispatch plant. Am i missing some configuration settings ?
regards
srinivas

Hi Srinivas,
Have you tried pegging the two line items or even "Auto Pegging"?

Similar Messages

  • Intercompany STO process for non valuated material

    Hi Experts,
    Please advise is intercomany STO process possible for non valuated material?
    Material where only quantity update is there & value costed to a cost object.
    If intercompany process is possible then what are all the steps that complete
    the full cycle?
    Regards,
    Partha

    Hi,
    Intra-company-code stock transfer orders to nonvaluated materials can be created in R/3 without specifying an account assignment.
    Carry out the following steps for the advance correction:
    1. Create the message '159' in the message class 'XC'. To do this, call transaction 'SE91' (message maintenance). Enter the message class 'XC' and create the message '159' with the following short text:
               Message              Message short text
               159          The account assignment category could not be determined
               Save the message.
    Thanks

  • Only 0EA of material available

    Hi Gurus,
    Can anybody please throw some light on the error. "only 0EA of material are  avialable" We are trying to send a returns PO to a vendor. The stock is now sitting in blocked stock. The delivery is created but the delivery quantity and the picked quantity is all zero on the delivery and it says only 0EA of material is available. As per our configuratiuon we do not inclue blocked stock as avaialble stock in MD04. Availalbe stock is only unrestricted and quality inspection stock. What could be the reason for this error messagfe. Also the the delviery date on the PO is 7/12/2011. Since all the stock that we want to send to the vendor is in blocked stock, why is the delivery not able to look at that stock and pick them up. And also in MD04 there is no other requrieemtns that could be eating away the stock, again this goes back to our config that the stock in blocked stock is not shwoing up in MD04 becuase we do not consider it. Help is greatly appreciated
    Thanks
    Anusha

    Hi Anusha,
    Can you please check this link http://help.sap.com/saphelp_erp60_sp/helpdata/en/dc/edbd3f793511d295d000a0c930e04c/content.htm, the bottom most part and confirm whether your steps are in line.
    Also you can refer this link.
    http://help.sap.com/saphelp_40b/helpdata/en/12/085cf8470311d1894a0000e8323352/content.htm
    From what I can understand, you have received some stock and is faulty, it is lying in blocked stock, you are now creating a return delivery referencing the GR material document?
    Is my understanding correct.
    Regards
    Shailesh

  • HU error when Reversing the goods issue in STO process

    Hello Gurus,
    I will explain the whole process we follow for STO:
    1. Create sales order ->Based on PR in sales order schedule lines, PO will be created -> outbound delivery -> Pack in HU -> PGI -> based on output type Idoc will be triggered -> this outbound IDOC will create the Inbound IDOC and Inbound delivery -> Here HU will copied from Outbound delivery (Means both in inbound delivery and outbound delivery HU is same)-> then do the Good receipt in Inbound delivery.
    Now when user doing the goods receipt he is getting error MSSA-SATRA exceeded by 1PCE  The reason is someone deleted the item from the sales order.  Hence when user trying to post the GR it is checking for the open sales order item in MSSA table.  Since it has been deleted from the sales order he cant able post GR.
    Now user does not wants to receive this item, hence we wants to reverse the process.
    So we followed the below process:
    1. Unassigned the HU in Inbound delivery and then deleted the Inbound delivery.
    2. Then used VL09 transaction to reverse the goods issue.  But system giving error saying that HU is already assigned to object.
    I cant able to reverse the Goods issue since the HU is same in Inbound delivery and outbound delivery.
    Kindly suggest the reversal process for the above case.  Many thanks for your help in advance.
    Awating for your valuable replies.
    Br,

    Insted of deleting the handling units you should have un assign the handling units from inbound delivery.You have deleted the handling units and the same handling units will not be available in outbound delivery Pack icon.
    Do one thing are you able to enter line item in sales order ?.If yes then create inbound delivery manually and create new handling units for the qty and do GR.
    Currently where is the stock is it transit ?.If yes then above option may work.
    If nothing is possible only an option to write a SAP oss note they will correct your outbound delivery and inbound delivery.

  • Excise GL in STO process

    Dear Friends,
    we have one issue in sto process
    my client want to transfer the stock one plant to another plant with in a company code,
    at the same time he will sale good to customer as well.
    sending plant J1iin picking same GL codes stock transfer as well as customer sales.
    but my requirement is it should pick different GL codes.
    a. while stock transfer it should pick the input excise gls, wt gls are posted  in j1iex (like a reverse entry)
    b. while customer sales should pick the ouput excise gls
    we used subtrasaction type for getting different gl's (DLFC 01SUB TYPE) but system is picking what we maintained in
    maintain default excise group and series group.
    kindly provide the proper inputs to solve.
    please view the screen shots.
    J1iin
    Migo Entry
    this is the combination maintained in spro settings.
    Can you please tell standard process of STO.
    thank you.

    Hi,
    Check that vendor excise number, I think that excise invoice no is already used for some vendor which is displaying now.
    Instead of Vendor excise number, you can go with Internal excise number. List of Internal excise number can be get from the transaction J1I7.
    Choose from the inputs, you will get the internal excise no,as Internal excise no is unique no & will be posted with exact vendor no.
    rgds
    gsc

  • Material Availability Check in Process Order Issue

    Guys, I need some help in understanding the folowing issue:
    I have a FG and 2 components.I created a process order and tried to release the order. Automatic availability check is done and a dailog box appeared to list out the missing parts. Missing parts list shows both the components. But one of the componet has unrestricted stock to use in the storage location. why did the availabity check show missing part for that component?
    I checked pp checking rule and it says for business rule 2 "no check" is unchecked. so that means checking is done. and this pp checking rule is assigned in OPJJ and also assigne dto the material master of the component.
    please let me know if you need more information. Thx

    Dear you are absolutely correct if you uncheck No check box in material availability in Order control OPJK  per plant and order type that no automatic material availability check is to be executed for the specified business transaction (order creation or order release).
    But further please note that the option of calling up a material availibility check manually and also of executing a collective availability check is not affected by setting this indicator. This indicator is also ignored if you work with Assembly orders and you have defined in Customizing for Sales Orders that a material availability check is to be carried out.
    Cheers
    kK

  • MM in STO process..?

    Hi all
    Can anybody explain me , what are all the modules involved in STO.
    And waht are all the activities to be done from MM side in Stock transport order..
    Pls explain me step by step by with transaction codes..
    Thanks
    sap-mm

    Transactions Involved in STO process will be follows:
    STO is Integration Includes MM SD & FI/CO
    ME21N -   Create Stock Transfer order (STO)
    ME22N -   Change STO
    ME23N -   Display STO
    VL10B -   Create Delivery
    VL02N -    Post goods issue & Batch / qty. picking
    VF01 -     Create Billing Documents ( STN )
    VF02 -     Display STN
    VF03 -     Printout for STN
    What is the pocess of creating the stock transfer order? W hat is the essential inputs of stock trans. order?
    This is only within the comp.code(w/o SD)
    351+101 MvT.
    with SD
    641+101
    1. Mat.(1434)should be maintained in both the plants.(@1000&1100).
    2. Should have enough stock in supplying plant(1000).
    3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
    4. Make it receiving plant as a customer in customization.  
    Create customer (xd01) & and define the shipping data for plants in both the plants.
    Path: spro u2013 img u2013 material mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data 
                (1 by1 )
    In Receiving plant (1100)                            In Supplying plant (1000)
    Customer num.  123345 (for ex.)                Customer num.  -
    (donu2019t fill) 
    Sales org.     yyy                                         Sales org.     yyy                                              
    Dist. Channel yy                                          Dist. Channel yy
    Sales div.         y                                         Sales div.         y   
    5. Assign doc. Type is u201CNLu201D for intra company STO. If  STO is inter company,           Assign doc. Type is u201CNLCCu201D.
        Position doc type is u201CUBu201D
        Enter supplying plant(1000) & doc type (NL)&checking rule (ex:01)
    6.Assign doc. Type is u201CUBu201D to uu2019r plants.(PO)
       Go for new entries 
       Enter supplying plant(1000) & Receiving plant (1100)&doc type (UB).
    7. Create a PO, choose the doc type is u2018UBu2019 & item cat.u2019Uu2019, Enter supplying plant as a vendor in PO  of the receiving plant(1100).
    8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
    9. Sales people they will provide u201Cout bound delivery numu201D.
    10. Do the GR. In GR the second tab 05 outbound delivery instead of PO mov.type 101.
    11. See the stock overview in the receiving & supplying plants.  
    Regards,
    Ashok

  • Maintain vendor for excise invoice -STO process??

    Hi,
    Still facing problem in Same issue so...
    I am doing Stock transfer from plant to plant in same company code.
    i have maintain all the information in the Excise TAB of migo but still face the following errors.
    Error is "Maintain Vendor for the excise invoice. (Message No 4F185) ...????"
    In STO process, vendor it won't come in the picture ??Becas , once we create purchase order with UB document type , it 'll ask for only supplying plant  not for vendor .
    So what might be the problem and how to locate  it , trouble shoot the same .???
    Thanks in advance
    SAP-MM

    hi
    check following
    goto Xk02
    give ur vendor ( plant assigned to)
    then goto PURCHASING TAB
    here in menu EXTRAS>ADD URCHASING DATA
    here u can find field for plant
    just check and revert back
    regards
    kunal

  • Freight capitalization for STO process using shipment cost document

    Dear MM experts
    I have been testing and trying to charge freight to material using transportation module. I know how to do it in simple STO process without SCD (shipment cost document) but I am not able to do it with SCD.
    I have searched and tried every link I found on SCN. Unfortunately there are many open threads and non of them is answered or giving complete solution. For example I have tried this link where Ajit Kumar has explained the scenario in detail I am but unable to achieve my result. I have also tried other links and SAP note 427944 as well.
    Now what thing confusing me is accounting entries and documents/steps where these accounting entries will be posted.
    My current process is like this in plant to plant transfer under same company code
    STO > OBD > Shipment Document > PGI > Accouting Entry with 641 movement type. Material account debit and same account credit. > Shipment Cost document > GR with 101 without any accounting entry > Transfer freight cost to FI using Freight Service PO determination > Accounting Entry Freight Outward Expense Debit and Freight Clearing Account Credit > MIRO > Accounting Entry Freight Clearing Debit and Vendor Credit
    As you can see we are booking freight as an expense and not charging to material. Now what I want is that freight should be charged to material. If I am sending material from plant P000 to plant P201 under same comapny code then freight charges should be added in material cost in plant P201.
    I have done FRB1 condition type with accrual and copy shipment cost tick mark and other stuff suggested in all those threads but it is not working.
    My requirement is to understand the points where and what accounting entries will be created as per my new scenario which is same as old one except one difference which is to charge freight to material instead of booking expense in freight service PO.
    Lets take an example that material cost price is 100 and freight charges is 50. Now as per old threads at the time of GR against OBD system will create accounting document with 150 debiting the stock in plant P201. What about credit? If we have added freight here then what about 2nd accounting entry in my first scenario in which freight expense is debited and clearing account is credited? Could anyone please explain accounting entries and points where these entries will be posted?
    Another thing is that is it only possible with moving average price to charge freight to material or can we do this with standard price as well using some standard or customized solution?
    Detailed and easy to understand answer will be highly appreciated.
    Thank$

    Hi Moazzam ;
    Firstly, you can benefit Badi/s in package VTRA which is given belowed.
    Secondly , i think that  shipping method --> create sto with delivery --> create shipment document and shipment cost document (problem is starting so system will be create PO and service entry sheet automatically , can you try shipment document is non-related with cost document.
    Thirdly , you can post invoices charge to material with miro , if you success to direct freight costs to stock account (BSX).
    Also , you can benefit doc. sap behaviours for Std price/ Map --> Planned & unplanned delivery costs in mm
    I hope , you can manage your process ; for me standart way is the best.
    Regards.
    M.Ozgur Unal

  • VPRS cost during STO process

    Dear All,
    In STO process, the pricing procedure is having the condition type VPRS. My doubt is whether the VPRS will pick-up the Moving Average price or Std.Price?  Because the Material Master is having both the price.
    How to instruct the system to pick-up the price, which we want to capture? For example if we want the system to pick-up only the Std.Price for particular material and Moving Avg.Price for some other material.
    Thank you
    Regards
    Manivannan R

    HI Mani,
    Futher to lakshmana, i want to add, the system will pick up the price which have given in the peice control. say if you give std price it will pick up that std.price or if u give MAP it will pick the MAP, but in M.master only for standard price the system will maintain Moving averege price also.
    hope this will clear ur doubt
    Reward if usefull.
    Nagarajan

  • Regarding goods issue (reversal) against process order

    Dear friends,
    Recently i have noticed one strange thing in SAP.I have created one process order and against it i have done the confirmation.Now when i go to Transaction code mb1a and select movement type 262 (Goods Issue to process order-reversal) and give the storage location and in next screen i gave order number,material code and its qty.These material code is not maintained in the bom of order header material.And even in process order in material tab we haven't maintained this material.Also while doing the confirmation in goods movement we haven't maintained this material.Then also system allows me to do so.Which means material which i haven't issued against the process order, system is allowing me to do its reversal i.e (262).because of which system is creating the stock for that material, which is not correct.
    Can we control this behaviour of system.
    Thanking you guys in advance.

    Hi Jitendra,
    This is fact and there is no standard Control available for the same.Only thing you can do is put control over Movement type 262 or try it by implementing User Exit.
    I am not sure but you can use Enhancement CCOWB001 - Customer exit for modifying menu entries.
    Include is LXCOWBF01.
    Regards,
    Dhaval

  • One Step STO process

    Hello All,
    I wanted to know the logic regarding one step STO process.
    while doing Post goods Issue :
    1) system posts the 645 mvt type (which is maintained in schedule line category NC)
    But i am unable to understand how system is triggering the 101 mvt type?
    Please Suggest on this...... is it a SAP standard code which is calling the 101 mvt type or any settings in SPRO ?
    regards,
    sujit

    Hi
    its sap standard
    645 Goods issue for a cross-company stock transport order in one step (Shipping)
    a goods receipt line is generated automatically for 101
    You post the stock withdrawal in the issuing plant and the receipt into stock at the receiving plant simultaneously. One material document is created
    Regards
    kailas Ugale

  • Program to update Delivery dates of STO based on Material availability

    Hi,
    We have requireement in which, we need to material availability check for the materials on daily basis. This is only for Stock Trasnfer orders.
    Suppose there is STO ( Stock Transfer Order) 1 that has been created for material M1 for qty 20. The scheduled delivery date for the material is tomorrow. Now I create another STO 2 today for the same material and same quantity. The scheduled delivery date that was proposed was 7 days from today.
    Some one deletes the STO 1. Now Material M1 with qty 20 is avaiable to use. I then go in the system, open STO 2 in change mode. Select the line item and click on Material availability check. When I do this, the new delivery dates are proposed.
    This is standard sap functionality.
    We have required to do this programmatically. Is there any standard SAP program which will check all the STO's by there creation date and do the material avaibility check automatically and re-set STO dates.
    Regards,
    Shahu

    Instead of all that, you could just use stock transport scheduling agreements.  MRP can update those automatically during its processing.

  • STO process gone  bad

    Dear Gurus,
    Greetings.
    We have configured the STO process between Plant 4000 to Plant 4400 and everything was working good. The end user wanted a little more facility, so we went for one step procedure.
    SPRO - Materials Management - Purchasing - Purchase Order - Set up Stock Transport Order - Assign Document Type, One-Step Procedure, Underdelivery Tolerance -
    Sup PlantRec PlantDoc TypOne StepTolerance
    4000---4400UBx--
    Well it did not work (of course because of our non configuration and for lack of time), so we wanted to go back to 2 step procedure, we have deleted the above line.
    Now the problem we are having is that the previously working 2 step procedure is not working.
    STO is getting created with 'Shipping' tab in ME21N and when we do VL10B, system is showing the STO.
    When we highlight it and click on Back ground, we are getting the message:
    *_See log for information about creating deliveries
    Message no. VR547_*
    Now when we again highlight the STO line and click on 'Log for Delivery Creation' button, system is giving this error message:
    GROUP-NO OF ERRORS-SH POINT---MAX TIME
    87340000.00
    When i click this line and click on 'Notes' button, system is showing the following messages:
    4500000539 000010 Sales area 18 00 is not defined
    4500000539 000010 Shipping for sales org. dist. chan. from plant 4000 is not possible
    4500000539 000010 Delivery from plant 4000 for material 9 is not possible
    Regarding line 1: Sales Area 40001800 is defined and it worked before and is still available in Ent Struc - Assignment - S&D - Set up Sales Areas.
    Regarding line 2: Sales Org 4000, Distribution Channel 18 are assigned to Plant 4000 in Ent Struc - Assignment - S&D -
    Assign Sales Org - Dist Channel - Plant.
    We have maintained the Plant data for both the Plants as follows:
    4ooo - No Customer number - Sales Area 4000-18-00
    4400 - Customer Number 4400 - Sales Area 4000-18-00.
    So why am I getting this fault and what do i do to rectify this situation. Gurus please help as we need to complete this in 2 days time.
    Thanks for your support in advance.
    With best regards
    Venkat - Hyd

    Hi Venkat,
    you have deleted the entry   (SPL  PLNT  TYPE ....) or you only removed the flag in ONE STEP indicator?
    i believe the entry shoul be there  but only this indiactor needs to be deflagged.
    Regards,
    Anubhab

  • Stock in transit to the Original Stock( STO process with Billing)

    HI All ,
    Here is an Issue on Stock Transport Order with Billing
    A STO (Purchase Order) Is raised Which consist of 6 line Items.
    VL10B is Done and Outbond Delivery no generated.
    With this Outbond Delivery no PGI is done for All Line items.
    Goods Receipt is Done(RECIEVED quantity will be in Quality Inspection Stock).
    So through T.code QA32  the End User had done
    a) Accepeted 5 line  Item and 1 line Item he had sent as" Return to Vendor".
    Note: ALL Items in this STO process are Exiceable Items.
    Because of this Return to Vendor of 1 item in QA32 a material document is generated with
    Movement type 122 and 1 Item is found in  material is Transit in recieving plant .
    But now The User wants:
    a)To cancel the Material Doc generated with movement type 122 and
    b)To bring back the Line Item1(Return to Vendor ) STOCK  back to the "Receiving Plant"

    Hi,
    Since your 122 was created from QA, I don't think you can cancel this document in MIGO.
    You may have to perform 101 to receipt from stock in transit again.
    Phyllis.

Maybe you are looking for