Issue Management - Change Detailed Issue Description

Hi Dears,
I would like of change the default text in field Detailed Issue Description in create of Issue. Somebody know where I make this change?
Thanks a lot
Best
Diego Gaspar

Hi,
The Item Description field in the Issue for Production document is taking the value from the Item in the production order which has issue method as Manual. So by default it takes the value of the Item.
May be you can explain the reason behind such a requirement for further checking.
Kind Regards,
Jitin
SAP Business One Forum Team

Similar Messages

Solution manager Remote Connection issues

Hi
I'm currently in the process of setting up Solution Manager 7.1 on windows Server 2008r2 using central system.
I did the prerequisite check & the Solman installation and i'm actuallly working on the post-installation steps.
I'm experiencing difficulty with the step : "Configure Remote Connection to SAP".
I followed the informations provided on :   http://service.sap.com/remoteconnection
In the technical prerequesite you have to set up a connection to sap support.
So i have to choose a connection type : I selected Internet connection so my first question is : do we need "VPN with SNC" or "VPN OR SNC" ?
I personnaly understood VPN or SNC.
So from here i decided to use SNC.
The first step was to set up & configure the SAProuter. I decided to do it on an another computer on the same domain ( not on the same computer where Solution Manager is installed ) but i'm not sure it is necesary
I assume I can install Saprouter on the same location as the Solution manager? do you recommend it ?
The Basic Functions testing with niping is working.
The next step is : "establish Internet Connections"
So now i can choose between SNC or VPN : my goal is to establish the connection as fast as possible.
I actually don't have a switch available ( i can get one if necesary but time is running ... ) so i'm opting for the SNC solution.
I tryed to get the certificate for the saprouter but i don't have a register SAProuter, but when i opened a customer messager for component XX-SER-NET, SAP answered about the impossibility to access SAP service Backbone with an SNC , saying that i will need to register a VPN site to site connection to SAP => i don't get it .... Can someone explain it to me ?
So please can one of you guru's tell me how to set this remote connection :
-which materials ( server / switch / firewalls ) ?
-where to get the right documentation ?
-What about DMZ ?
-I have a single IP Address is that enough ? ( setting up nat for port 3299 )
- do i have to contact a service provider ?
My idea was initially to set up the SAProuter on the same computer as the SOLMAN setup & use SNC communication to communicate with SAP but it doesn't seems that easy. Do i need separate installation for Saprouter <=> Solution Manager. ?
What's the minimal infrastructure to establish this connection ?
In addition to that, after configuring the SAProuter, i had trouble with the SAPMMC : on my system , on the instance 0 , the process disp+work.EXE won't run ( yellow light )and i can't find where i made a mistake if you have suggestions ...
Really need your help, i'm on a short deadline ... Any help, even incomplete, would be appreciated.
Thanks a lot.

Thx for the answer.
I actually managed to register my saprouter with SAP and was granted with CN/OU & connection informations.
I followed this guide : http://service.sap.com/saprouter-sncdoc with the addition of this guide : http://wiki.sdn.sap.com/wiki/display/Basis/SAProuterviaSNC.
My first issue : I'm running with a Windows server 2008 r2 enterprise edition 64 bits with a processor Intel Xeon 2.4ghz ( dualcore). so i decided to use the crypto folder "nt-x86_64"
For the environment variable i set as System variables SECUDIR = C:\usr\sap\saprouter and SNC_LIB = C:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll
The generation/install of the certificate is alright ( sapgenpse get_my_name -v -n Issuer is OK )
using the command :saprouter -r -K "p:CN=mycn, OU=myOUnbr, OU=SAProuter, O=SAP, C=DE" i have
I get the following message : trc file     dev_rout
                                                no ligging active
Its strange cause it looks like its running but when i check the services running on windows saprouter isn't started .... How to know if SAProuter is running right ?
If i folow the SAP procedure : Step 3 : test of the ip connection by the customer : SAP Remote Services : technical preparation ( see SAP Note 812386 ) : it's ask in the note to implement note 766505 via SNOTE : i get the following error msg : Error in remote connection to destination SAPOSS : Error when opening an RFC connection ( LB: Hostname or service of the message server unknown#DEST = SA
What's wrong ?
If i use T oss1 in parameter => technical setting => i set my saprouter info in SAProuter 1 ( at customer site ) with instance no. 99 and if SAProuter and SAPNet Message Server at SAP i put the following : Name : sapserv2 / IP Address 194.39.131.34 intance no. 99 and message server name oss001/ DB Name 001/ Instance no.01.
When trying to "Logon to SAPNet" i have an error Unable to connect to SAPNet message server ( default connection will be used ... )
and followed by the error screen : "partner '80.15.173.168:sapdp99' not reached WSAECONNREFUSED : Connection refused. do you want to see the detailed error description ? "
Details : module nixxi.cpp / line 3286 / Method : NipConnect2:80.15.173.168:3299 / Return code : -10 / System call : connect / Error No : 10061 / Error Text WSAECONNREFUSED: Connection refused / Counter : 10
Any idea ?
when doing niping.exe -c -H /H/mylocalSR/H/194.39.131.34/H/194/39.131.34 i obtain :
Wed Dec 07 21:20:09 2011
connect to server o.k
Wed Dec 07 21:20:09 2011
send and receive 10 messages (len 1000)
times -
avg   122.148 ms
max   193.731 ms
min   81.564 ms
tr 15.990 kB/s
excluding max and min :
av2   118.273 ms
tr2   16.514 kB/s
Is it the expected output ?
I've maintained system data in service.sap.com/system-data ( selecting the sap router ) then i tryed to use the SAP service connection, downloaded the .exe but i can't find the stfk.oez. I realized that in my maintain connection screen i have no space for entering any routestring. Seems wrong ?
Do i have to use the SAO?
i've made nat redirection from my router as this : from my public ip to my lan ip ( 192.168.x.x) what should i enter in the routestring : /H/public or lan or hostname ?/S/3299 ?
Hoping you can help me ! ( the goal of all this is to set up RFC connection for postinst step of Solution manager ).
Edited by: BLANCHARD Guillaume on Dec 7, 2011 10:47 PM

Issue Management scenario Troubleshooting dump CX_WDR_ADAPTER_EXCEPTION

Hi,
I'm customizing img transaction to configure service desk scenario in a
Solution Manager SPS15 7.0(SID=SMG), on windows 2003 server/SQl Server
2005.
The problem is customizing Issue Management scenario at step "Troubleshooting".
When I execute this action, I go to smsy transaction->Settings -> Self-Diagnosis
and an error with this tittle appears:
Error when processing your request
What has happened?
The URL http://solution.grupotec.local:8002/sap/bc/webdynpro/sap/dswp_sd_settings/ was not called due to an error.
Note
The following error text was processed in the system SMG : Adapter error in &VIEW_ELEMENT_TYPE& "_08" of view "DSWP_SD_SETTINGS.START": Context binding of property ? cannot be resolved: The Mapping to Node COMPONENTCONTROLLER.1.LAYOUT Has Not Been Completed.
The error occurred on the application server solution_SMG_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: RAISE_BINDING_EXCEPTION of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
Method: GET_BOUND_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
Method: GET_ATTRIBUTE_INTERNAL of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CP
Method: IF_WDR_RESPONSE_RENDERER~RENDER_USER_INTERFACE_UPDATES of program CL_WDR_CLIENT_SSR=============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SMG in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server solution_SMG_02 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server solution_SMG_02 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 010 -u: SOLMANADM -l: E -s: SMG -i: solution_SMG_02 -w: 0 -d: 20080618 -t: 115252 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
This error creates a dump:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WDR_ADAPTER_EXCEPTION
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_WDR_ADAPTER_EXCEPTION' was raised, but it was not caught
     anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CX_WDR_ADAPTER_EXCEPTION======CP' has to be
    terminated.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WDR_ADAPTER_EXCEPTION', was not
     caught and
    therefore caused a runtime error.
    The reason for the exception is:
    Adapter error in &VIEW_ELEMENT_TYPE& "_08" of view "DSWP_SD_SETTINGS.START":
    Context binding of property ? cannot be resolved: The Mapping to Node
    COMPONENTCONTROLLER.1.LAYOUT Has Not Been Completed.
    The occurrence of the exception is closely related to the occurrence of
    a previous exception "CX_WD_CONTEXT", which was raised in the program
     "CL_WDR_CONTEXT_NODE_MAP=======CP",
    specifically in line 25 of the (include) program
     "CL_WDR_CONTEXT_NODE_MAP=======CM001".
    The cause of the exception was:
    The Mapping to Node COMPONENTCONTROLLER.1.LAYOUT Has Not Been Completed.
Information on where terminated
    Termination occurred in the ABAP program "CX_WDR_ADAPTER_EXCEPTION======CP" -
     in "RAISE_FOR".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 45
    of the (Include) program "CX_WDR_ADAPTER_EXCEPTION======CM004".
I've tested in sicf transaction that /sap/bc/webdynpro/sap/dswp_sd_settings/ service (right click->test service), appears a log-on popup I type usr j2ee_admin and pwd, and the same error appears.
I'm logged with user to configure Solution Manager
which was SAP_ALL, SAP_NEW profile and a Z_RFC rol with( S_RFC,
S_RFCACL authorizations object).
Please could you help me??
Thanks and Regards
Raul

I've resolved this problem with SAP Note:
1157740 - Self Diagnosis dumps when Settings is accessed from Menu
Thanks and Regards
Raul

Issue management problem

Hi all,
I am facing a problem in issue management in transaction solman_issue_mgmt transaction when i try to open a existing message i am getting a dump. the same dump occurs when i try to create a new issue using that transaction.
pls find the details of the dump .
I have applied not 1397754 also but still the problem persist.
kindly guide in this issue.
Error when processing your request
What has happened?
The URL http://ty-stfd0.ty-sap.os.itelligence.de:8002/sap/bc/webdynpro/sap/dswp_ci_issue_management/ was not called due to an error.
Note
The following error text was processed in the system TSD : View usage MAIN_USAGE_1 does not exist in window ISSUE of component DSWP_IM_ISSUE_VIEW
The error occurred on the application server ty-stfd0_TSD_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WDR_RR_VIEW_CNT_ASSIGNMENT~GET_EMBEDDED_VUSAGE of program SAPLWDR_RUNTIME_REPOSITORY
Method: IF_WDR_RR_VIEW_CNT_ASSIGNMENT~GET_DEFAULT_VIEW_USAGE of program SAPLWDR_RUNTIME_REPOSITORY
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT_CONTROLLER of program CL_WDR_INTERFACE_VIEW=========CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT of program CL_WDR_VIEW_MANAGER===========CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TSD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ty-stfd0_TSD_02 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server ty-stfd0_TSD_02 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: SKRISHNAN -l: E -s: TSD -i: ty-stfd0_TSD_02 -w: 0 -d: 20100203 -t: 092939 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Regards,
Subhashini.

Hi Rajeev ,
Thanks for the reply.
i have checked the service, the specified service is active and tested also. the main screen apprears, the problem is with the next screen.
there is one more service dswp_im_issue_mgmt , the problem is coming with that service.
In our system, two service are active with the same name(dswp_im_issue_mgmt ) in that one is active and other is not active.
I tried to delete one but i got a message that the service is no more valid. is it because of this am getting the error
kindly clarify.
I tried to run the SIAC_LIST_UNPUBLISHED but it was not there in the system.
st22 details:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WDR_RR_EXCEPTION
Date and Time          03.02.2010 08:11:33
What happened?
The exception 'CX_WDR_RR_EXCEPTION' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLWDR_RUNTIME_REPOSITORY'
has to be
terminated.
|Error analysis
|    An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WDR_RR_EXCEPTION', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
View usage MAIN_USAGE_1 does not exist in window ISSUE of component
DSWP_IM_ISSUE_VIEW

Windows 7 x64 Pro, desktop GUI fails to display correctly, or crashes, when High RAM load, and even after. HW changed, same issue. Please Help.

Hi Guys,
I have have this horror issue with my PC. I have even changed the hardware configuration and the problem still persists. My PC fails to display the desktop correctly after using highly RAM intensive applications, especially Chrome, but even after getting
the chance to close it, or waiting for it to crash by itself, the PC is still not able to display correctly the GUI, even on other browser/applications as shown in the screenshots.
1st Hardware Config:
Intel Core2Quad Q9450
4x2GB DDR2
MSI P43 motherboard
Ati Radeon x550 video card
Software used, that seemed important for me to mention:
NOD32 v4.2
Comodo Firewall 5.12
Chrome
Screenshot Captor
SpeedFan
Other mentions:
Aero is disabled, because I've considered that it's one of the causes.
So, I've considered that it's a RAM issue or a videocard issue, and I've upgraded to:
Intel Core i7 3770k
4x8GB DDR3
Asus P8Z77V-LX motherboard
Intel GPU integrated in the 3770k CPU
The problem just happened 2 times on this rig also, and the RAM was not even coming close to it's maximum capacity of 31.7GB. It was at ~20GB's.
Also, this is another videocard(Intel's integrated GPU), so we can exclude the videocard from the suspects.
My suspects:
1) some desktop manager bugs, or other similar issue
2) video memory allocation - I'm still suspecting that it can be caused by the amount of RAM dedicated to the videocard, currently, I think that it is at 256MB.
3) some poorly designed components of Chrome/Screenshot Captor - still very questionable since there are enough resources on this system, so there should be no fight over resources. And when the system is barely used there are no issues.
4) Adobe Shockwave Flash - maybe this one????
I have attached a set of 20 screenshots here, these were taken on the 1st configuration of my PC, using Q9450:
http://imgur.com/a/Mc8hI#4
Notice how it distorts the image by duplicating it and showing it in a smaller space, or how does it displays those black rectangles. In those moments, the PC is fully functional(the apps are running the background), without being slowish or something, but
you can hardly control it like that. For example, I've tried to remove the mouse from the USB, and then I've insterted it back, the image was not displayed correctly, but the mouse was recognised instantly and the pointer was controlable.
Same thing still happens on the new configuration. Please advise me.
LE: OS is Windows 7 x64 SP1 Professional and it's Geniune. There is no cracked software on this PC. No games. I've tried to maintain it as clean as possible.

Hi,
First, please be ensured that you have installed the latest drivers and all the updates.
Then check whether this issue will not in
Safe Mode. If it didn’t occurred, I suggest you narrow down the cause in
Clean Boot mode.
In addition, try to create a new profile to see how it works.
Hope this helps.
Vincent Wang
TechNet Community Support

How to make change in Issue list across all project sites?

Hi,
We all have issue list in our project sites. We need to add some values to some of the columns in that issue list. The requirement is we need these changes to reflect in all the new sites. Also how to make these changes reflect in current existing sites.
Can anybody suggest a way to achieve this. One thing that i am aware of is creating a new project site template and associating it with EPT but that still not solves the issue for preexisting sites.
Please help asap.
Thanks in advance.

Hi SpWrk
If you have already created some sites. You would need to apply these changes either Programetically (Powershell or C#) or Manually.
However, you can take the following approach to avoid this problem in future. (i.e. Your "future" changes will appear in existing sites too). I am writing the procedure breifly but let me know if you need more details on this
1) Create a content type (e.g. "Project issues" at PWA level)
2) Associate this content type with the Issues List in your site template as well any existing project sites. Make it a default content type for Issue lists. save your site template
3) Create all your custom columns in this new Content type (changing OOB issue columns can break your reporting)
4) Your changes to content type should reflect in future sites as well as existing sites (whereever the content type was appiled)
Regards
Hammad Arif EPM Advice Blog

Issue management in Solution manager

Hi,
We are in design phase for Solution manager 4.0. The requirement is now that we want to Internally (250 Sap experts divided in functional groups) involve other support groups or employees to the support message.
From the theories available I would say to use Issues (SLF2 or SLFI (4.0), linked to the support message (SLFN), eventual changes can be linked to this issue as well. within the issue it is possible to assign tasks to groups and(?)/or employees.
When a change request is available, no issue is necessary to involve (assign tasks) to employees or groups?
Another sound here is to use the "task" message in order to involve other people.
I am wondering what would be the smartest solution and why. Please help.
Jos

Nadine the only pain that I see by using the Issues Management component for project issues is that people who wont normally log into Solution Manager (project managers, integration leads, org change leads, etc) will now need a SAP user ID and training on the system. Even though this is very minimal training, and its probably good for them to use the SAP interface, it isnt as quick as using Sharepoint, an E room or spreadsheets.
But if it is project issues associated to business processes (thats how it sounds based on your other posts), this could be very useful. Again the functionality is mature enough to deploy according to your requirements, but prepared for some whining and pushback.
Good luck

Issue management - Email transmission to message processor

Hi all,
I am now working in issue management( solman - sp15 ). Here i am trying to create a automatice email transmission to the message process when the issue assigned to him, But its not triggering a mail.i have worked in servicee desk management to sens a automatic mail transmission.
With that knowledge i have worked in this one also..
Here i used the action TASK_ACTION_PROFILE..,,but i feel the problem here is i am not able to define the condition according to the user status.. Am i missiong out anything
Anyone have idea on this???
regards
Vijay

Dear Vijay,
Please see note : 691303 - Sending E-Mail from message after status change, i believe that help you..
Best regards..
Claudenir Bispo

Issue management security

Hi does anyone know how to restrict acces for certain users to approve a transport in issue management?
We customized our issue management status screen for "transport approval " and we would like to give it to certain users only.
Thanks Mike

Hi,
Application visibility to the unwanted users can be stopped by using the Authorizations per MCD i.e. Application.
You can decide the Authorization objects which are mandatory to view the data in a perticular application. And then only those users who have the necessary authorization will be able to see the data in the application.
You can not stop the user SAP_C from synchronizing with the server because this user is the valid user in DOE. However you can define the configuration which will avoid the data changed by user SAP_C being processed on the DOE. This scenario is called "Non-repudiation" scenario where a invalid user is trying to change the data on the mobile client. This case can be handled on the DOE and depending on the security setting, the message processing is stopped and correspondingly the admin will be notified.
Regards,
Ramanath.

Issue Management clarification

Hi All,
I have got the following doubts related to issue management.
1. how is the issue is sent to the processor automatically. where is the configuration done for this .
2. can we be able to configure automatic email notification to the processor.
i tried to define a email notification but it was not successful. only the issue is trggered and the smartform is not getting triggered.
kindly advice on where can we find this configuration.
Regards,
Subhashini.

Hi Fernanado,
when i go through the help, i could understand that it activates the automatic notification when technical attributes are changed.
i am not sure about what technical attributes they are referring. is it the status change or priority or something else.
I have copied the slfi action profile and made a Z copy of it. intially when the issue is created , the automatic notification works fine.
but i want this notification for my custom defined statuses.
when i look in to the action profile there is only one action item where it logs the change made.
i wanted to know where can i control this automatic notification for a set of statuses.
kindly advice on how can i tackle this problem.
Regards,
Subhashini.

Issue management during implementation

Hello!
We are planning to use issue management in blueprinting and config phases in our rollout. We have SM 7.0 SPS16 with Workcenters configured. In Solar01/02 when I create an issue at a relevant project structure node I get the window " Issue Maintenance".
How or where do I configure for the following settings in the " Issue Maintenance " window.
1. Priority - I want to customize the drop-down menu with my own. (Instead of the default 1. very high...etc.)
2. Subject - I want to customize the drop-down menu entries in this field too.
3. I want to hide the tabs "Service sessions" and "Change requests" as we are not using this.
Appreciate your help and inputs.
Thanks.
Mike
Edited by: Mike Sikorsky on Jul 14, 2008 8:32 PM

Hi
1) Use OSC3 or OCS3 transaction, i could't remember which one
2) You will have to use transaction SPRO and navigate to "Define Catalogs, Codes, Code Groups" and make changes there. After that you need to adjust/customize Code Groups, followed by Code Group Profile, followed by Subject Profile. Then you will have to make changes to Transaction Type SLFI. It's quite a lot of work
3) I am not sure if you can hide those tabs.

Customize Issue Management mail

I want to customize mail that get sent when status change on a task in Issue Management.
Dose anyone know how to do this?
Witch Action Profile and SmartForm are used?

goto SPPFCADM
CRM_ORDER
choose action defintion and here choose ur action which is sending mail ..e.g email to message creator.
Here goto to processing type and you get the name of the standard smartform
Goto smartforms transaction and copy it to z* and make modification as per req...
similarly you can enhance the clas etc....
thus create a new zaction for mailing by copying from std and call this smartform and class
Chk this blog
/people/dolores.correa/blog/2007/09/18/sending-e-mail-from-support-message
This will solve ur prb
Regards
Prakhar

Change goods Issue date and delivery date

while crating Sales document through VA01
i want to replace goods issue date (VBEP-WADAT ) with my Z calender date.
so that delivery date(ETDAT) aslo should chaged automatically ( bcz iof the change in goods isuue date ).
how to achive this ?
i tryied in Program    program of MV45AFZZ/ MV45AFZB in the User Exists mentioned below:
1.     Form Userexit_Check_VBEP
2.     Form userexit_move_field_to_vbep
i was able to change goods issue date (VBEP-WADAT ) but not refleting in output screen,..
regards,
ramesh

Hi Venkat,
Even it did not update in my user exit when I update from VBEP-WADAT. So, I did back calculation (considering route lead time) and updated Delivery date field VBEP-EDATU. It is simple. I have given the sample code as below.
   if lines( xvbap[] ) = 1 and VBEP-ETENR = '0001' and            "Calculate RDD while the first line item entered
     vbap-route <> space and <<your GI date>> is not initial.    "Only when header RSD is filled
      select single TRAZTD into ws_traztd from tvro
            where route = vbap-route.
      ws_days = ws_traztd / 24 / 10000.
      if ws_days <> 0.    "Only when Transp. Lead time is maintained ( So, will not affect other entities )
         select single FABKL into ws_fabkl from T001W
            where WERKS = vbap-werks.
         CALL FUNCTION 'WDKAL_DATE_ADD_FKDAYS'       "Calculate as per Factory calender
             EXPORTING
               i_date        = <<your GI date>>
               i_fkday       = ws_days
               i_fabkl       = ws_fabkl
             IMPORTING
               E_DATE        = ws_date
              E_FKDAY       =
             EXCEPTIONS
                ERROR         = 1
                OTHERS        = 2
         IF sy-subrc = 0.
            VBEP-EDATU = vbak-vdatu.   "copy to the first line item
         ENDIF.
      endif.
    endif.    "Route days

Issue with changing database location at runtime

I am having a similar issue to:
Re: Issue with changing database location at runtime
where I am using Crystal Reports 2008 SP 3 fix pack 3.3 and a OLE DB connection to a SQL 2008 R2 server. Running on a computer on the network where the report can see the original development server is fast, other computers where that server is not available are hanging 20 seconds before coming up.
I am using the same code from the Crystal Sample app to change the connection on each table. I found that the slowness comes the first time the ReportDocument object is accessed to get the collection of database tables, before the connection info is set.
Fix pack 3.4 was mentioned in that post. Does fix pack 3.4 fix that issue? I don't see fix pack 3.4 on the downloads page (https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/bobj_download/main.htm)

I just found on the reports that were having the issue there was a SQL Expression. Per this thread:
Re: Report load is slow after changing database servers
There was an issue with that and the fix is not out til the end of Feb so I found a way not to use the SQL Expression and the speed is much better.
However, your information provided led me to this post:
Cannot Change Table Location, but Only for One Report
And I am also experiencing an issue where the table location is not changing on one subreport and I will look into that as a possible solution.
Thanks so much for your help.

Can I use a project/issue management software with LabVIEW?

There are project/issue management softwares.
I only know Redmine.
Can I use LabVIEW with such softwares?

I am not aware, that you can hook LabVIEW to tools like bug tracing databases in a native way.
What you can do is performing that link in a context of requirements management. Use NI Requirements Gateway for this functionality.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Issue Management - Change Detailed Issue Description

Similar Messages

Maybe you are looking for