Issue message in background creation

Hello,
I have the following issue:
Based on a contract I issue the materials with a sales order and bring them back with a return order. In the sales document type I have set in `On/off switch for messages about outline agreements` the indicator to `D` check at item level and copy if unique. So at order creation the order checks if a contract exist for that item and assigns it.
In the normal process `foreground`VA01 this works good. But we use for the return orders a self made program in SAP, this program uses the standard sap customizing settings.
This program creates the return order in background and this gives problems, because the outline agreement TVAK-HNWKM issues a message, this is triggered by ` call_function_flags` in standard SAP.
Because the message couldnu2019t write to the output screen, the assignment to the contract could not be created.
Does somebody have a solution for this?
Thanks!

Hi,
As per your settings made in outline messages of contract of document type system will pop up messages but any how it will not impact the outcome when u put messages..
If at all you are creating in back ground every time then please dont put any messages in outline messages and keep it blank and then execute...
Hope it will create document with contract assignemet...
Regards
sankar

Similar Messages

I was able to print with my acrobat before, but I can no longer do it. the error message says "adobe creation cannot continue because acrobat is not activated" How do I activate it?

i was able to print with my acrobat before, but I can no longer do it. the error message says "adobe creation cannot continue because acrobat is not activated" How do I activate it?

I have the exact same issue. I can print one document and then I get the error mentionned above ("adobe creation cannot continue because acrobat is not activated"). Then I need to reboot in order to be able to print a new document.
I have suite and went to Photoshop as suggested, but this program is already activated. I tried to launch Acrobat Pro but it won't.
I'm using the Design and Web Premium CS6 Suite on Windows Vista.
Thank you so much for your help.

Adobe Acrobat 6-Compatibility Issues Message

Does anyone know why when I try opening Adobe Acrobat 6 that I get "This program has known compatibility issues" message? That is as far as I can get opening acrobat. When I press run program, the adobe reader opens instead. Thanks for your help.

I have no clue what you are talking about. What is your OS? If it is VISTA, that is the issue. AA6 and a Reader are not recommended to both be installed. To keep Reader from starting, be sure it is not the default for PDF files and also be sure that it is not running in the background (the norm for the program).

Issue/Messages Tab

Dear All,
In SOLAR 01 transaction, there is a tab for Issues/Message. In that tab there is a first column named Type which will have two option in drop down, Message - BMIS and Issue - SAIS.
My query is can we add more types like messages and issues. If so were it has to be configured.
thanks and regards
Praveen.J

Hi Marcel,
the tab Messages/Issues is prepared only for documents of type Messages and Issues. These types (BMIS for Messages and SAIS for Issues) are fixed values of Domain HIER_RTYPE_IM, which is used in the list of values for field Type. Besides that the standard program behind SOLAR01/SOLAR02 is considering only the creation of Messages and Issues as well, this is hard coded, function codes SA_CREATE_MESSAGE and SA_CREATE_ISSUE (assigned to button Create). If you use ZLFN instead of SLFN it will be reflected in the tab, i.e., instead of creating SLFN you could use ZLFN, but no other transaction types not related to messages/issues such as ChaRM change request or documents.
Best regards,
Raquel

Issues with ODATA service creation

Hi Gurus,
I am facing some issues with ODATA service creation. I have an analytic view which I want to consume via SAP UI5.
As per guides and blogs, I need to create 3 files, namely .xsaccess, .xsapp and .xsodata. I created these three files but at the same time .xsodata and .xsaccess got created at one more place. That place is my package which I checked out while creating the repository. Now when I try to activate my .xsaccess or .xsapp file, I get an error message - "The file name .xsaccess or .xsapp already exists and only 1 file is allowed per package"
for more info please revert.
Kindly help.
Best regards,
Chandan

Chandan Sinha wrote:
Can we add multiple analytic views in one ODATA service?
Certainly. You just have multiple entities then. You can even create associations between them. Here is an example that uses a combination of CDS Views, Attribute Views, and Analytic Views:
service namespace "Wile.services" {
"Wile.data.models::AN_EPISODES" as "Episodes"
keys ("EPISODE_ID")
navigates ("ToACMEItems" as "ACMEItems",
            "ToCoyoteNames" as "CoyoteNames",
            "ToRoadRunnerNames" as "RoadRunnerNames",
            "ToDirectors" as "Directors",
            "ToWriters" as "Writers");
"Wile.data.models::AT_ACME_ITEMS" as "ACMEItems"
keys ("EPISODE_ID","ITEM_ID");
"Wile.data.models::AT_ACME_CATALOG" as "ACMECatalog"
keys ("ITEM_ID")
create using "Wile.services:ACMECatalogExits.xsjslib::itemsCreate"
update using "Wile.services:ACMECatalogExits.xsjslib::itemsUpdate"
delete using "Wile.services:ACMECatalogExits.xsjslib::itemsDelete";
"Wile.data::WileECoyote.Episode.CoyoteNamesView" as "CoyoteNames"
with ("EPISODE_ID","NAME_ID","NAME")
keys ("EPISODE_ID","NAME_ID");
"Wile.data::WileECoyote.Episode.RoadRunnerNamesView" as "RoadRunnerNames"
with ("EPISODE_ID","NAME_ID","NAME")
keys ("EPISODE_ID","NAME_ID");
"Wile.data::WileECoyote.Episode.DirectorsView" as "Directors"
with ("EPISODE_ID","NAME_ID","NAME","URL")
keys ("EPISODE_ID","NAME_ID");
"Wile.data::WileECoyote.Episode.WritersView" as "Writers"
with ("EPISODE_ID","NAME_ID","NAME","URL")
keys ("EPISODE_ID","NAME_ID");
association "ToACMEItems" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "ACMEItems"("EPISODE_ID") multiplicity "*";
association "ToCoyoteNames" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "CoyoteNames"("EPISODE_ID") multiplicity "*";
association "ToRoadRunnerNames" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "RoadRunnerNames"("EPISODE_ID") multiplicity "*";
association "ToDirectors" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "Directors"("EPISODE_ID") multiplicity "*";
association "ToWriters" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "Writers"("EPISODE_ID") multiplicity "*";

Kitkat upgrade is the worst ever. I hate the messaging white background. I hate the white blinking light that is so very small you cannot tell if you have messages. My phone plays music every minute. I can't find how to disable this feature. I get hundr

I hate the new KitKat upgrade. I hate the messaging white background. I hate the loss of the green blinking light in the left upper corner. I do not know why music plays whenever I get an email. I get hundreds of emails to my device and it plays music and is driving me crazy. How do I disable this? I went through all my settings and cannot find where this may be set. It's a bust if you ask me for the Android system. Booooo

An update should only improve your device performance mistygirl1209. I'm sorry to hear you don't like the aesthetics of the new OS. Although we work closely with manufacturers and OS developers, we don't produce the devices, operating systems or updates. I want to help you fix the email issue. What make and model device is this? What type of music are you referring to? What type of emails are these? Are there attachments in them?
JonathanK_VZW
VZWSupport
Follow Us on Twitter@VZWSupport

Error message during cube creation

Hi expert,
System show the following error message during cube creation, please info how to solve this problem. Thanks.
Define the characteristics of the validity table for non-cumulatives
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

Hi,
Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

SmartForm - Output could not be issued,Message no. VL086

Hi , i had create a smart form for the DO and it is working when i try to view it through the function. However, when i want to try it through issue the Delivery Output, system throw error , "Output could not be issued,Message no. VL086"
Please kindly advise.
thank you

Hi,
Pls check if it helps
VL086: Output cannot be issued
Siraj

Output could not be issued message whlie handling smartforms.

while executing the smartform i am getting Output could not be issued message and i am getting no display.
My functinal consultant had created new output type for VF03 tcode ( a copy of existing one), and i copied the same program and smartforms with slight modifications.
now while executing the output type through VF03 I am getting the abouve message.
and while checking there is no data in JOB_OUTPUT_INFO internal table of the smartform.
what will be the reason? and how to correct this.
<b>this is an urgent task.</b>

Hi,
This might be mostly becoz of due to data not getting passed to the Smartform.
First ensure that, you get the data in the internal table of the Driver program and then check the same in the SM...
So please check and let me know if the problem persists.
Thanks,
Vishnu.

Output could not be issued Message no. V1104

Hi Expert,
I have done output configuration properly for Zsalesorder and Zsmartform ,I can able to see print view in order but when I will give print then print is not coming and below error is coming
Output could not be issued Message no. V1104

Hi,
it seems there is no connection between printer and sap server.
Firstly send normal world doc from server to printer.
If normal world document is not printed in this case you should check connection.
Regards

Issue in Outbound Delivery Creation w/o order reference & w/o sale order

Hi ,
I have an issue in outbound delivery creation without order reference and without sale order through
BAPI_OUTB_DELIVERY_CREATENOREF . I am getting an error like
1. Copying is not poss.because an entry is missing in Table TVCPL: ZLR (Checked entries are there in the Table TVCPL)
2. No instance of object type OutboundDelivery has been created. External reference.
But I can able to create an outbound delivery through VL01NO txn.
Pls help me where I am gng wrong.
Regards
Rupachandran

hi,
this is to inform you that,
1. Copying is not poss.because an entry is missing in Table TVCPL: ZLR (Checked entries are there in the Table TVCPL)
1.a. sorry for sending the link
Re: can't create DN for sales return order
balajia
Edited by: balaji timmampalli achari on Dec 9, 2010 3:15 PM

Problem in Issues/message table problem in RMMAIN

Hello ,
I have a problem in Issues/messages table in tx RMMAIN
Problem:When i click on create "Issue" tab in RMMAIN,issue tab is disabled.
Please let me know what i have to do?
Regards,
Neni

Hi,
Is this problem with a roadmap assigned with a project or a roadmap not yet assigned with a project?
If this roadmap is assigned with a project, then:
1. Go to tcode: SOLAR_PROJECT_ADMIN->select the project to which this roadmap is assigned.
2. Go to tab->Project Standards->Select the tab "TABS".
3. Check the visibility of the tab "Issues/Messages". It should be "Visible".
If still the problem persists, then check whether you have this SAP_RMMAIN_EXE authorization.
Check also that you have activated BC sets for service desk.
SOLMAN40_SDESK_BASICFUNC_000
SOLMAN40_SDESK_TPI_ACT_AST_001
SOLMAN40_SDESK_ACTIONLOG_001
SOLMAN40_SDESK_ACT_ADVCLOSE_001
SOLMAN40_SDESK_TEXTTYPES_001
Let me know if this not solved your issue.
Regards,
Sanjai

DM 4.5, software issues message "Cannot find system in table file"

Serious error in Desktop Manager Software V 4.5Windows XP SP3MS OutlookDesktop Manager Software V 4.5, accompanies new RIM Blackberry Curve package purchased retail Bell MobilityJune 2009
After installation DM 4.5, software issues message “Cannot find system in table file”This happens during “Intellisynch” [Outlook <> Curve] set up. Tried 4 times to make this work – no luck [I am experienced DM user – 4 BBerrys over 8 years]Called Bell Tech support 3 calls total time 2 hours !!Ended up trying to do command prompt and registry setting changes over the phoneDespite 3 long calls this did NOT solve the problem
Went to Blackberry web site -- their remedy is disgraceful - they expect untrained PC users to do clean removes of DM 4.5 with Windows Registry edits by hand. Highly risky – dangerous – and likely will not work
REMEDYUse MS Add/Remove programs to remove DM 4.5 or 4.7Download old version - DM 4.2 Release 2 from BBerry web suiteLoad DM 4.2DM 4.2 works fine – copied 1000 contacts and 1000 calendar entries from Outlook correctly to my new CurveDoug SeabornToronto Canada416 819 3684

Hi and welcome to the forums!
These procedures do work, and are not very hard.
A lot of users have dealt successfully with it.
Here is the Knowledgebase article:
Let us know if you need some help or explanations.
OK?
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15278&sliceId=1&docTy...
The following error message appears at the end of the synchronization process in BlackBerry® Desktop Manager:
Cannot find table in system file
CauseA BlackBerry Desktop Software upgrade failed to remove the Connectors folder from C:\Program Files\Research In Motion\BlackBerry\Connectors. As a result, older Microsoft Outlook applications were registered with BlackBerry Desktop Software.
Resolution
To resolve this issue, complete the following steps:
Verify that the Connectors folder is present in the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
If the Connectors folder is present, complete the tasks listed below.
Task 1 - Remove the existing Microsoft Outlook connector ilxolkCompanion.fil
Open a command prompt.
Navigate to the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
Type regsvr32 -u ilxolkCompanion.fil. Note: Microsoft Outlook will no longer be listed as an available application in BlackBerry Desktop Manager.
Task 2 - Register the most current Microsoft Outlook connector
Open a command prompt.
Navigate to the following location: C:\Program Files\Research In Motion\BlackBerry\IS71 Connectors\MS Outlook Connector
Type regsvr32 msoutlookconnector.fil. Note: Microsoft Outlook will now be registered as an available application in BlackBerry Desktop Manager.
Note: After these tasks are complete, remove and re-install the BlackBerry Desktop Software. For instructions, see KB02206.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Message when background Job is successful .. information

Dear All
I just want to give an information message when background job is successful.
I am starting a job using SUBMIT < > AND RETURN
if sy-subrc = 0
CALL FUNCTION 'JOB_CLOSE'
if sy-subrc <> 0
Do Nothing
else
message <>
end if.
end if.
Let me know if above code is correct and how to make a message information only in this.
Amol

Hi Amol,
I'm struggling to fully follow your requirements, but the job is not complete when you call the function 'JOB_CLOSE'.
You can check if the background job is successful using the method below...
Within a DO-ENDDO use the function module 'BDL_READ_JOB_STATUS' passing it job name and job number.
If the job status returned from 'BDL_READ_JOB_STATUS' = 'F' then the job is finished and exit the DO-ENDDO.
Kind Regards,
Richard.

Interface Scenarios - Issues / Messages tab

Hi,
How can I activate the Issues / Messages tab of the Interface scenarios? The tab is available but I cannot enter any issues or messages as I can do under Configurations.
Any inputs are appreciated.
Many thanks,
Dharmi

Hi Dharmi,
I see what you mean but this is not possible for this node. Even if you create subnodes under Interface Scenarios, Issues/Messages cannot be entered here as per other nodes.
Possibly you could try linking a node or document to the Interface Scenarios node and assigning an Issue/Message to the original node above.
Regards,
-Rohan

Issue message in background creation

Similar Messages

Maybe you are looking for