Issue multiple batches
Hi
How to avoid issue of multiple batches of component during back flush.
Regards
Sandeep
DO MB1B transaction, with Movement type 541,
Enter the material with different Batches for required qty. as different line items.
e.g
line item 1 : mat X Batch 1 50 nos
line item 2 : mat X Batch 2 40 nos
line item 3 : mat X Batch 3 10 nos
line item 4: mat Y Batch 6 10 nos
line item 5 : mat Y Batch 7 10 nos
line item 6 : mat Y Batch 8 10 nos
Edited by: sudhansu satapathy on Oct 21, 2011 7:29 PM
Similar Messages
-
How to issue Multiple Batch Items to subcontactor
Hi,
I am facing problem at issuing the batch managed material to subcontractor, suppose I have to issue 20 kg of material xxxxx to subcontractor, but we have two batches aaa qty 10 kg and bbb qty 10 kg, but system is not getting batches automatically at MB1B-541, and we have to enter two lines at mb1b manually for batches aaa and bbb.
Please suggest how system should get batches automatically on the basis of shelf life expiration date.
Regards
Rajeev GuptaHi,
You should define the batch search strategy and condition for batch determination while movement types.
Refer the below configuration doc it will help you..
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0caed4a-40f9-2c10-349a-96ec617a8161?overridelayout=t… -
Issue material for Subcontracting with reference to PO for multiple batches
Hi All,
Issue: I want to issue 5-6 materials with reference to PO which have multiple batches. How can that be done?
Thus, if my raw material in stock are:
mat X Batch 1 50 nos
mat X Batch 2 40 nos
mat X Batch 3 30 nos
mat Y Batch 6 10 nos
mat Y Batch 7 10 nos
mat Y Batch 8 10 nos
mat Y Batch 9 10 nos
i f for semi finished material A, sub contractor order 45000009 is created, where raw material required are:
Mat X 100 nos
Mat Y 30 nos
then how can I issue the raw materials wrt PO, and select multiple batches at the same time, without user entering the material again and again.
I have gone through the SDN multiple times to see the probable solution exists, but I have not received any solution.
Regards,
AnkushDO MB1B transaction, with Movement type 541,
Enter the material with different Batches for required qty. as different line items.
e.g
line item 1 : mat X Batch 1 50 nos
line item 2 : mat X Batch 2 40 nos
line item 3 : mat X Batch 3 10 nos
line item 4: mat Y Batch 6 10 nos
line item 5 : mat Y Batch 7 10 nos
line item 6 : mat Y Batch 8 10 nos
Edited by: sudhansu satapathy on Oct 21, 2011 7:29 PM -
Goods issue against reservation from multiple batchs,
Dear Friends,
My material is active for batch management at material level, When I do Goods receipt sytem generates unique batch no for the quantity of goods receipt,
Goods is issuied against reservation, if reservation quantity is more than batch quantity then i have to issue material from to differnt batches for that i have issue material from first batch and then i have to issue materil from second batch, so multiple goods issue has to done for one reservation,
Can anybody tell me how to issue material for a reservation from multiple batches at a single transaction, please suggest,
With regards,
ARABBASHi,
Use MB26 for good isse against resevation.
Regards -
Quality Certificate Issue with multiple batchs with same delivery note
Hi,
Hi,
My Company Business Process:
Quality certificates are generated prior to the good receipt through IDOC process.
When we receive the goods, GR should look for existing quality certificates and trasnfer the inspection results to inspection lot.
When we are trying to receive for single batch & delivery note, It is looking for existing quality certificates. There is no problem in this senario.
But when we receive the multiple batchs with the same delivery note, system is generating new quality certificates. It is not looking for existing QC which got generated through IDOC process. This is the actual proble.
Note: I am not sure is standard SAP does not supprot to receive the multiple batchs with the same delivery note or not at the time of GR. Please advise me.
Thanks,
SumanIn data origin in certificate profile SAP supports " mix the origins within a characteristic. For example, the results data can originate from an inspection and the specification data can originate from batch determination."
Now here question arises Is batch determination of one batch or multiple bacthes took place against a single delivery note.
As per my understnading it should be one batch with is supported in std SAP. -
Multiple batches for a production order and mapping with components
Hello Gurus,
Our business requires to create multiple batches for one production order + they want to trace which component in the production order has been issued to the main equipment.
For example, I am creating production order for 'A' equipment for 4 qty. Business wants to create 4 different batches for these equipment
Lets say now 4 batches are created A001, A002, A003 and A004.
Now lets assume 2 nos of 'B' component are required for 1no of 'A' component. So the requirement of B component is 8.
Lets say 8 batches are generated B001, B002 ......B008
Now lets say batch B001 and B002 are issued for A001 and packed together. How do we map this?
I understand we can do some enhancement for creating the multiple batches but I still dont know how to map them with each other.
Please helpHi Ethan
There is a functionality called WIP batches, that allows you keep the batch traceability within an order.
With WIO batches you can track which batch of component was used to produce each batch of finished product.
See this link for more details:
Work-in-Process (WIP) Batch - SAP Library
BR
Caetano -
Problem in J1IFQ -Reconciling the Qty -Received in Multiple Batches- reg
Dear Sir/ Madam,
We are encountering the Problem During Reconcilation of Quantity in Subcontracting cycle Received in Multiple Batches.
The Following steps are followed,
1. We have created a Subcontract PO with BOM Explosion.
2. The Required Components are issued through MB1B.
3. Subcontract Challan Raised in J1IF01.
4. We created the Goods Receipt for the Processed MAterial Which has come in Two Batches.Hence we have used Distribute Quantity and split the Qty and Entered the Batch Numbers.Document Posted.
5. In Transation J1IFQ, We have entered Material Document Number and Challan Number and Executed.
6. Top of the Screen Material Document Details with Open Quantity are Displayed.There were two Line items displayed with Movement type 101.Since it is Received in Two Batches.The Consumed Quantities were shown in Movement type 543.
7. Bottom of the Screen the Challan details were displayed with Challan Quantity.
8.The Open Input quantities are assigned cumulatively against DC Quantity for both the Batches.
9. When we check the Allocation it gives an Message saying that"Material XXXXXXXXXX is not assigned fully, short by XX.XXX KG".
Note: We are not facing any problem If the Goods Receipt is made for the Single Batch.
Kindly Give us Your Valuable Input In order to Solve the Problem.
Regards,
M.MurugesanHi,
You don't need to create 10 process orders to split for 10 batches, In one process order itself you can do batch splitting in CO11N (auto GR) or MB31.
Pl check the below link
Process order with multiple batches of finished product
thanks,
JK -
Error multiple batches not allowed
HI,
while adding the delivery document i am getting one error, the error is multiple batch is not allowed.This issue occurred for the 1st time.
Regards-
Mona.Dear Gordon,
Thanks for your reply but it was working earlier.Actually this is related to add on.
Regards-
Monica. -
Multiple Batches in a HU causing Multiple Pick TOs be created
Hi,
Below is my scenario and I hope some one that is familiar with WM/HU can help me.
We have HU with multiple batches (e.g. 5 different batches) which are received on the same time, we are also 2 step picking relevance. So, we have to create picking TO using LT0E to against the DN group number. We are expecting only 1 TO been created if the HU quantity (e.g. 5 units) is matching the DN quantity (e.g. 5 units). However, the system is generating 5 TOs and each referring to the individual batch number. This has actually cause issue on TO confirmation process where the system is prompting a Destination HU which at the point of picking this sould be equivalent to the Source HU. However, system do not except the Source HU and throwing out the error message saying "Destination storage bin of TO item # and HU# are different". Can anybody help me to understand what is the problem here? Thanks.
TracyHi,
Try this.
1. Goto Tcode MIGO with your PO number and do the GR for 3 quantities and give the batch mentioned by the vendor. Dont process check and post
2. Again go the PO reference field and give the same PO number and do the second GR for the 5 quantties with the different batch number
3. Then finally do fot the 3 rd GR.
4. With three line items in GR, check and post the transaction.
It will generate only 1 Material document number.
Regards,
RitiG -
Excise invoice capture with multiple batches
Hi
We have created a Purchase order for Material X and carried out the transfer posting(MB1B)and selected two different batched of stocks, and created excise invoice using
t code J1IS.
When I am capturing the excise invoice in J1IEX. with ref to Purchase order, system is showing only one line item.
It is not capturing multiple batches.this. we are doing it before goods receipts.
Regards
SureshHi,
Point1)
Ur material directly goes to the site for site work right ?
My question is why are u not taking the credit and dont want to update the part1 and part2.....???
ur are the consignee(purchaser) for the same so u can take credit...!!!
again one thing if ur not taking the credit then why r u bother about the excise settelement...Do the vendor invoice settelement. and inventorised the total excise.......
Point 2)U need to maitain the excise master i.e J1ID...( it is as important as maitaining material master for procurement).If u want excise related transaction to be happened.
Point 3) if ur not interested in maitaining the excise master then use ME51 report for analysis for excise settelement.
regards,
sujit borse -
How to remove Sales Order to Own for multiple Batches at a time.
Dear All,
We use to scrap FERT materials using Mvt. Type 551 / 555, but before scrapping stocks are being removed from Sales Order using Mov. Type: 411 'E', because Batches are produced against Sales Order under MTO strategy.
The removing process from Sales Order using T.Code MB1A & Mov. Type: 411 'E' is quite time consuming because in this case only one batch is removed from Sales Order at a time.
So is there any way by which I can remove multiple Batches at a time from Sales Order.
Thanks and Best Regards,
Vivek KumarHi
YOu can use transaction MASS with the sales document, sales document item, batch fields.
create a variant and do the changes
regards,
Ramana -
Error while selecting Multiple batchs in Delivery
Dear All,
I am facing a problem while selecting multiple batches for single item while creating delivery. It gives me Error "Item Category not defined for Batches".
But if i select one batch per delivery it works fine.
Pls guide me.
Thanks in advance.
Shailendra PanhaleShailendra,
1. Even though you do Batch Management Configuration in Logistic General. Item Category that is used should be activated for Batch Split.
a. In That case IMG --> Logistics Execution --> Shipping --> Deliveries --> Define Item Categories for delivery, Choose the item category you have defined for the process and activate the following indicators
Relevant for picking,
St location Required
Determine storage location and
Auto Batch Determination Indicator
b. --> Logistics Execution --> Shipping --> Deliveries --> Define Item Category determination in deliveries
Maintain it accordingly Delivery type(ZLF) + Item category(NORM) + Usage(CHSP - Batch split) + Item Category + item Category (ZTAN)
Maintain Copy controls for Delivery to billing accordingly throuh the Tcode VTFL
Regards
Sathya -
Create inbound delivery for same material with multiple batches
Hi Experts,
An ASN( advanced shipping notification) contains multiple batch numbers for same material or line item.An IDOC has different segments with batch numbers but in SAP while creating Inbound delivery(VL31N) only batch number ( segment) get posted automatically in SAP other batches are need to post manuaaly.
I am using IDoc type : Delivery03 ,Message type: DESADV
How to resolve this problem?
Thanks,
AnilHi Anil,
Welcome to SCN for your first post. Did you check with your functional people about this.
Regards,
Madhu. -
Looking to create delivery with multiple batch line items
Hi,
Can you please suggest me BAPI / FM to create a delivery with multiple batches. like ... i have 1 mail line item in the delivery and n sub line items. If possible can you please post req parameters too. Thanks in advance.solved my own
-
Skip lot across multiple batches for same material
Hi,
I am looking for a way to control skip lots across multiple batches for the same material.
We need to do a quality check in production after a certain quantity produced (on a machine, for a material). My idea was to do skip lots (for GR) until we reach a threshold (say 10.000 pcs) and then do an inspection for the next GR for that material.
Any ideas how to set that up?
Thanks for any hint
AndreasHi mergler,
Ref to your query pls check this link Stock Posting for Skip Lots
Thanks in advance
Maybe you are looking for
-
Hi all, Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works... Anyway, I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to th
-
Moving iPhone App Project from one Mac to Another...HELP!!
Hey guys, Im new to programming. I made a simple app and I want to most it from one mac to another. I copied the folder and tried running it but it gave me a whole bunch of errors along the lines of: - directory not writable - permission failed - err
-
MSS UWL customization : Which .XML to modify and How?
Hello, We have EP7 with MSS/ESS ERP 6.0 EHP4 and already configured the UWL system object with alias 'SAP_ECC_HumanResources'. I am using the UWL iview from the MSS business package on portal. I have a requirement to modify the task tab table removin
-
hi all, hope i'm in the right forum. i have 2 databases sitting in 2 separate machines. 1 installed with Oracle 9i and 1 with Oracle 10g. I'm trying to select a partitioned table in 9i remotely (from the 10g db). In order to do that, I've created a s
-
I�m very interested in knowing how to use the documentation element in the WSDL file. What can it be inside? Only plain text? Can I have inside other tags from other namespaces? Has it got any atrubute (lke documentatio name=...? I wanted to know too